The easiest way to sew a toy for a dog
If you have not previously had experience sewing or you have too little time to bother with difficult patterns, this option is for you. In order to make a simple toy for your pet, prepare the following materials and tools: trimming thick fabrics of any color, durable threads, cotton wool or foam rubber for stuffing toys, scissors, needles, pencil or pen.
Now proceed to the process of making toys. First you need to choose the shape of the toy. Rely on your taste. This could be, for example, a bone, a heart, a snake, a ball, a bow, etc. Then make a sketch directly on the fabric with a pen and, if you are satisfied with the shape of the future toy, add a 2 cm indent at the edges of the part and cut it out. Then put the blank on another piece of cloth and circle it with a pencil or pen. Cut it out again. As a result, you have two blanks that will make up the toy.
If the shape of the toy is too complicated, fasten the first blank on a piece of cloth with pins so that it does not move. Then we sew the parts from the inside, and at the end we leave a small hole in order to fill the toy with material prepared beforehand (cotton wool, foam rubber, pieces of soft fabric).
How To Make A Toy For Dogs With Their Own Hands
The easiest way to sew a toy for a dog If you have not previously had experience sewing or you have too little time to bother with difficult patterns,……
After we sewed two parts, turn the blank inside out and, filling it, sew it up, gently folding the edges of the fabric inside. By the way, consider the choice of fabric for toys carefully. Make sure it is non-toxic and safe for your dog’s health. Of course, it is desirable that these be natural fabrics (for example, cotton, linen).
By the way, if your dog does not show much interest in toys, you can use bright fabrics or unusual texture of fabrics for sewing them to arouse interest. Of course, such toys are not durable, but there is nothing to worry about, because you can make a new one quite easily and quickly.
Pattern knitted soft bone for dogs
A more complicated, but very interesting option is a knitted bone. In order to make it, you need a few balls of wool yarn with a rather dense structure and different colors, needles No. 4, a needle, a marker and a batting or foam rubber. So, we type 30 loops with one thread color.
Then divide equally by three spokes, thus, goes to 10 cm for one. Knit to the end of the row. Then we mark its end with a marker. So we repeat 12 rows.
The next two rows in the same way we knit the yarn of the second color, and the next 4 rows – the third. Next 2 rows knit first color, and the next 10 rows – at your discretion. After that, we reduce the number of loops to twenty, until the middle part of the future toy becomes approximately 7.5 cm.
Then we increase the number of loops again to 30. So we continue to knit 10 more rows.
The next 2 rows – the second color, 4 rows – the third, 2 rows. we knit the first and the last 13 rows in any color until this part of the workpiece reaches the length of the first wide end. After the base of the toy is connected, sew one end of it and place the batting or foam rubber inside the resulting tube and the wide ends. We sew the second end of the toy and our bone is ready!