Assembly of the Makita 2450 Puncher Device

General characteristics

"Makita 2450" It is known among builders and repairmen as a rather functional professional tool. It is simple and reliable in operation, has lightness and good balance. Thereby "Makita 2450" will last quite a long time. It has a good dust protection system, which makes the operation of the equipment durable.

Assembly of the Makita 2450 Puncher Device

Its popularity is explained by the possibility of repairing the hammer drill. "Makita 2450" at home. You do not need to spend a lot of money on its maintenance. However, before the punch assembly process "Makita 2450" you should familiarize yourself with the technology of its disassembly and repair.

Specifications

A punch has a certain set of qualities "Makita 2450". The specifications provided by the manufacturer in the instructions are as follows.

The weight of the tool is only 2.4 kg. The drill mounts are provided by the SDS system. The rotary hammer is designed for crushing, drilling and hammer drilling. He has three modes of operation. The number of idle revolutions is 1100 per minute, and the maximum number of strokes is 4500 per minute. The strength of the translational motion at the maximum is 2.7 J. The maximum drilling diameter:

  • for wood. 32 mm;
  • for metal. 13 mm;
  • for concrete. 24 mm;
  • for a hollow crown. 54 mm.

There are also additional functions for the punch. "Makita 2450". The characteristics highlight the presence of a safety clutch, reverse, lock power button, as well as electronic speed control.

Power supply network is 780 watts. The cable length is 4 m.

Signs of a fake

Due to the great popularity of the equipment presented, cases of counterfeiting are not uncommon. There are characteristic features that determine the fake HR 2450 hammer drill. These include a short cord (about 0.5 m). The letters on the black clasps of the suitcase are matte for the fake, and the letters for the original are shiny.

In the photo of the punch in the instructions for this product, the background is light gray, almost white. The copy will have a dark, dull background color.

If Japan is indicated as the manufacturer on the HR 2450 case, this is not a real tool. The original says: "Made in P.R.C."i.e. "Made in China".

"Makita 2450" includes a rubberized handle on which the serial number is indicated. All details of the suitcase must also contain each designation. In a fake, the handle is not made of rubber, but of plastic. This should also be a signal of the need to refuse to purchase such a tool.

Disassembly scheme

In the process of repairing the presented equipment, the user must be able to disassemble the tool. Punch assembly diagram "Makita 2450" has many nodes and elements. To carry out repairs, you should not know all of them. Here are the most basic elements that the diagram represents ("Makita 2450". the device is very complex).

The first is the snap ring. It is involved in the process of dismantling the cartridge cover. Next is an annular locking device. It holds the ball to fix the drill. Its guides are the washer and conical spring.

4 screws connect the gearbox to the motor. There are many rubber parts in the circuit which, when worn, become a common cause of breakage.

This knowledge is enough to carry out repairs at home. Next, you should familiarize yourself with the technique of its implementation.

The feasibility of self-repair

Rotary hammer repair "Makita 2450" do it yourself for several reasons.

Representatives of a service center troubleshoot a specific algorithm. This leads to a rather large cost of repairing the tool.

It is also likely that the company’s representatives will conduct a routine inspection, the need for which is doubtful. And you still have to pay for it.

If the unit or several of them still require replacement, the service staff will supply only licensed parts "Makita 2450". Repair in this case may be comparable in value to the purchase of a new tool. All these facts speak in favor of self-tuning or replacing equipment parts.

Repairs

"Makita 2450" do it yourself with certain knowledge and skills. The technology for inspecting and replacing parts for the HR 2450 is fairly straightforward. It involves disassembling the tool, after which all old grease, dust, and dirt are removed. Damaged components are replaced with new ones. Then all the details of the punch are assembled together. It is necessary to familiarize yourself with each item of such work. They can be made in the area of ​​a cartridge, a mode switch, a perforator case.

To carry out repairs, first remove the cartridge, then the speed switch. After that, repairs are carried out inside the case. Lubricant and worn rubber elements are replaced.

Cartridge

With a flat screwdriver, the cartridge is disassembled. Rotary hammer repair "Makita 2450" do it yourself with this element. Squeezing the lid of the cartridge, remove the rubber boot. The snap ring is dismantled. Then the lid of the cartridge and the metal ring are removed. It locks the drill fixation ball in the barrel. It is taken out, and the metal washer, conical spring get without effort.

You may also like

  • How to choose the cordless drill / driver for home. Choose torque, impact and drill for a drill / driverIs it worth taking a powerful device or is it better to save money, do you need a punch or not, why do you need to work with large drills? Now we will tell you how to choose a ...
  • Advantages and features of the Husqvarna tillerProcessing large areas is difficult to perform without the help of special equipment.Husqvarna Tiller has the following advantages: High quality. Thanks to many years of experience, the developers have made the units of the highest q...
  • lawn mowing is a mobile high-performance tool for the refinement of household plots and surrounding areas. During long-term operation due to wear of parts or production defects, malfunctions arise that lead to the fact that the trimmer stalls or does not start. Since this tool is...

The cause of the breakdown may be wear of parts. It is detected if the drill does not automatically snap in without pressing the cover. After checking all the details, they identify the cause of the breakdown. Old elements are cleaned of dirt and old grease. The ball is densely treated with new oil. The conical spring is installed with the narrow side to the resistor.

The guide washer should press it so that it is below the hole in the barrel. Rotary hammer repair "Makita 2450" with the cartridge area requires fixing the ball in the hole. All parts are assembled in reverse order.

Mode switch

To disassemble, remove the T-shaped latch on the handle of the switch. Use a 2 mm screwdriver for this. It is very necessary to tighten the tabs of the latch. She is pulled out. The red lock must be held so that it does not fly out under the action of the spring.

After carrying out these steps, the switch knob should be turned to the leftmost position. So its protrusions will coincide with the grooves of the editor’s case. The switch is easily removable. The latch is pulled out with the spring. The rubber ring on the handle of the switch should be pry off with a thin screwdriver and remove it. It prevents grease from escaping from the housing.

Punch assembly diagram "Makita 2450" in the field of the switch assumes a certain sequence of conduct. All parts and the seat are cleaned of old dirt. Thoroughly grease two metal pins and a rubber ring. They put it on the switch. A spring is inserted into the handle, then a latch. It should not pop up when a latch is installed in the housing.

Then the switch is inserted into the gearbox. In this case, the handle is sent to the sector between the designation of the combined mode and impact. However, he will not be inserted until the end. The switch should be turned to the drilling mode and a little further. In this case, do not forget to press the latch button so that it does not interfere with the movement.

Then turn the switch clockwise and push the latch to the end.

Switch malfunctions

In the process of getting acquainted with the question of how to assemble "Makita 2450", you should find out the frequent malfunctions of the switch. They can be caused by wear on the metal pins. In this case, one of the modes will not turn on. You will need to replace the switch. This should be done in the event of a breakdown of the landing tabs.

If the rubber ring is worn, a slight leakage of grease will occur. Will have to replace it.

It happens that the beak breaks at the latch, with which it is attached to the troughs of the gearbox. The tabs of the lock may be damaged. To avoid all of the above damage, you must carefully handle the tool.

Video: Assembly of the Makita 2450 Puncher Device


Gear housing

To remove the housing from the gearbox, raise the tool barrel up. The punch should be pressed to the workbench, while pulling the shell up. In this position, all the details remain in place.

After their revision, inspection and replacement, the gear housing is replaced. All its elements must be located in its original form. Necessary elements need to be greased.

During assembly, the gearbox housing must be cleaned with kerosene or gasoline. Next, the shell is put on to its original place. The mode switch should not be in it.

Malfunctions in the gear housing

The case of the HR 2450 model is characterized by high strength, breakdowns in this unit are quite rare. But it happens that certain troubles happen here too. If the case got along with a needle bearing, then its seat is very worn out. When this part becomes extremely loose, the housing should be replaced.

You may also like

  • Choose the right chainsaw for yourself. it’s not the most difficult thing; extending its service life is much more difficult. The first thing a person who bought a chainsaw, is the task. run it in. This procedure is mandatory and is key in the life of the instrument. You can’t ju...
  • And the world-famous company Stihl produces a huge range of quality chainsaws. For domestic purposes and simple work, the Stihl 180 chainsaw was created, which showed excellent performance and reliability. All the best practices of the German company were used here, with a weigh...
  • BOSCH Battery TypesBosch batteries are divided into two groups according to their purpose: starter batteries and traction lighting batteries. Starter motors give a large current when the car engine starts. Traction lighting designed for long-term loads with a small current value....

Sometimes the seat of the intermediate shaft is broken. Repair is supposed to be similar to the first case.

The gear housing flange has an oil scraper ring. If it was damaged by construction dust (it happens extremely rarely) or careless actions of a repairman, it is changed together with the body.

The same procedure is performed in case of failure of the holes of the mode switch. The listed types of breakdowns are typical for fake specimens.

Consumer Reviews

Opinions were divided among users about the tool. Among the shortcomings, overheating and leakage of the punch lubricant are noted "Makita 2450". The reviews also make it clear that repairs are carried out by a service center for a long and expensive time. However, eliminating the cause of the malfunction yourself, you can expect normal operation of the tool. Particularly often, malfunctions occur in punchers that have been released in recent years. But earlier products are known as the highest quality. This is due to the emergence of many low-quality fakes that are not made using original technology.

It is noted that this is one of the most inexpensive rotary hammers. It is lightweight but powerful. When you purchase the original and the normal handling of the user during operation, the equipment will work for a long time and productively.

Having familiarized with the characteristics, assembling and repair schemes of the punch "Makita 2450", you can extend the life of this tool. By performing maintenance and replacement of parts yourself, the user will significantly save his money. When buying, you need to pay attention to the characteristic differences of the original tool. It will last longer than fakes.

Today, developers offer buyers hundreds of different apartments and houses. Often, residents want to slightly change their parameters, making housing more convenient and comfortable. Makita punchers will allow to carry out repair work efficiently and quickly. Factory parts and good build quality will extend the life and help to avoid failures during the restoration process. The article will give an idea of ​​the main advantages of the products of this manufacturer.

Makita rotary hammer device

Among users, the Makita rotary hammer has established itself as the tool with the greatest functionality. It is durable and does not require special skills for use, is lightweight and comfortable while working.

The design provides a special protective system designed to limit the spread of dust. With timely cleaning, the tool will work efficiently throughout its entire service life.

Makita is widely used in people who prefer to do repairs on their own. The tool is simple to operate, the financial maintenance costs are minimal, inexpensive.

The manufacturer presents the following specifications:

  • Total weight. 2.04 kg
  • SDS system allows you to mount drills
  • You can hammer and drill
  • The system has three modes of operation
  • The largest number of beats per minute. 4500
  • Translational Strength. 2.7 Joules
  • The power supply network is 780 watts.

Why is a Makita puncher undesirable to hammer?

Often the equipment fails, and the drill flies out of the punch. This happens for various reasons. Many users of Makita rotary hammers are faced with the fact that their device does not hit, but drills at the same time. You can fix the breakdown yourself. The most common causes of malfunctions are presented below:

  • Countershaft wear
  • Deformation of clamping units
  • Damage to the connecting rod system
  • Lack of lubrication for proper operation
  • Damage to shock components

Makita rotary hammer: DIY repair

Diagnostic and troubleshooting technology are identical to other devices. To begin with, you should disassemble the tool by removing the case, and then remove obsolete grease and dirt.

Nodes that have stopped working are recommended to be replaced. After that, all the constituent elements of the mechanism are set to their original position.

For correct operation, it is recommended that you carefully examine each repair point. To restore the functionality of the cartridge 2010, the mode switch and the housing, the following steps should be performed:

  • Remove cartridge
  • Remove switch
  • Repair defects in the inside of the case
  • Lubricate and replace worn parts.

How to disassemble a puncher and gearbox?

When disassembling the gearbox, it is recommended to adhere to the following instructions:

  • Install the hammer drill on a hard surface by lifting its barrel up
  • Pull the shell with forward movements, pressing the tool to the table. This position prevents accidental displacement of the constituent elements.

Makita rotary hammer assembly

After the repair is completed, all the removed parts should be returned to their original position. It is recommended that a fresh coat of grease be applied to all necessary parts.

Before assembling, the body is cleaned with kerosene or gasoline. The peeled shell is returned to the place. The mode switch must not be in it.

Circuit diagram Makita HR 2450

The Makita-2450 rotary hammer system consists of many complementary components and a list of spare parts. Among the most significant elements, the features of which should be taken into account during repair work, the following stand out:

  • Ring locking device. It is designed to hold the spherical element fixing the drill. The washer and spring guide it
  • Snap ring It is necessary for the correct removal of the cartridge cover
  • Four screws connect the gearbox and motor, eliminating vibration. The circuit has a large number of rubber components. Often they cause a malfunction.

Descriptions of the mentioned nodes will be enough for a quality repair.

Conclusion

Makita rotary hammers by right are one of the best in the modern market. The 2470 is a bit improved, but that doesn’t make the device durable. Timely repairs will maximize the period of correct operation. This article helps to understand the features of the work of the main nodes. To eliminate the most common types of malfunctions, these materials are enough.

Everyone who has a tool bought 3-5 years ago should understand the steps involved in disassembling a Makita punch. Frequently used equipment breaks down. It is difficult for a home master to do without it. With the help of a puncher, you can start minor repairs and even construction, for example, to equip an extension to the main part of the house.

If the owner of a Makita punch knows how to disassemble and assemble the tool, he will be able to replace the worn parts, lubricate them with grease and avoid further equipment malfunctions.

The uniqueness of the Makita interior design

The design provides a protective mechanism that limits the spread of dust during repair work. In order for the tool to continue to work without loss of quality, there is no need to constantly clean the Start button and other levers, parts from debris.

But the main thing that allows Makita to each owner is to feel like a real man, the owner of his home. The financial costs of servicing the device are also pleasantly surprising. The cost of a new product is small.

The unique SDS system, declared by the manufacturer, allows you to fasten the drill with the Makita apparatus. In addition, 3 functional formats are built into the system, you can also hollow walls or drill holes. The largest amount of work is 4,500 beats per minute. Power from the network is 700 watts.

Why hollowing is better to limit

Despite the fact that the instructions for the use of a Makita puncher indicate the characteristics of hollowing the surface, you should not buy a tool for the constant execution of this work. Technique may fail. The drill will fly out of equipment. Trying to bring the device to life by persistently turning on the drilling mode when it breaks is a big mistake. It is better to understand the cause of the malfunction.

The list of reasons for the breakdown of the Makita rotary hammer looks like this:

  • the intermediate shaft is worn;
  • deformation of clamping format nodes occurred;
  • the connecting rod system is out of order;
  • there is not enough lubrication for the correct functionality;
  • shock parts are broken.

Use a tester to identify a defect. Connect it to the tool plug and press the switch. If resistance occurs, the power circuit is functioning correctly. Decide on the remaining possible breakdowns, armed with screwdrivers, wrenches, a hammer, a wooden extension.

How to repair Makita do it yourself

If you have never encountered disassembling a Makita punch at all, it will be difficult to do it yourself by watching the video instructions of the masters. The first step in disassembling is to remove the chassis base. Then, while repairing the equipment, obsolete grease should be removed and dirt and debris removed from the parts. If the functional units are faulty, replace the old with new ones. Then install the components back into the structure.

To repair a cartridge 2010, a mode switch or to correct defects in the housing, perform the following set of manipulations:

  1. Remove the cartridge.
  2. Remove the switch.
  3. Repair any defective signs seen on the inside of the case.
  4. Gently and evenly spread the lubricant over the surface.
  5. Replace defective parts.

How to disassemble a gearbox in a Makita puncher

Disassemble the Makita tool gearbox following the step-by-step guide:

  1. Fix the equipment on a hard surface by lifting the barrel up.
  2. Gradually, without jerking, remove the casing by pressing the equipment to the countertop. This approach will help to avoid accidental movement of parts.

The process of disassembling the Makita punch is clearly shown in the video.

How to assemble a tool

When the repair work is completed, and you are sure that you managed to cope with the malfunction, it’s time to assemble the parts into a whole, working mechanism.

  1. Before assembling, apply fresh grease to equipment components.
  2. Dampen a cotton swab with a little kerosene and wipe the case. You can use gasoline.
  3. Next, the body is put in its original place. https://www.youtube.com/watch?v=y8V0aag3Gb8

Makita rotary hammer diagram

Unassembled equipment is assembled according to the scheme presented in the instructions for use of the device. The scheme helps not to get confused in complementary nodes and spare parts. Elements that are considered basic are included in this list:

  1. Locking device of ring type. Holds the ball component securing the drill. The integrated washer and spring mechanism ensure the correct direction of the drill.
  2. Stopper ring. Allows you to remove the cartridge cover without damage to the parts.
  3. Screws connecting the gearbox to the motor, excluding vibration. There are rubber parts in the circuit. If they fail, the pads are replaced with new ones.