Beat let it down to drain load. Oil pump on a stihl chainsaw replacement…

Frequent malfunctions of the Stihl MS-180 chainsaw

As a mechanism for supplying oil for lubricating the chain, in the chainsaw of the STIHL MS 180, a mechanical oil pump is used. That catching, the STIHL 180 oil pump is one hundred percent made of iron parts and is characterized by practicality and the highest reliability. We will see more about how the STIHL 180 chain oil supply system is organized.

The oil pump drive consists of 2 parts, it is a plastic gear with a worm gear and a wire lever that transfers the force from a drum star to a worm gear.

One of the main defects of the oil allowing accounting (software) of the saw is a defective thread on the plastic gear of the oil drive, therefore, with at least what ability, it is necessary to control its wear and tear and quality of the thread.

The lever is aggressively fixed on the gear, and they are supplied as one detail. The tip of the wire lever has an appropriate bend, which is designed for the best adhesion to the leading device-star. A special slot was made on the drum to install the drive.

The STIHL 180 oil pump is one hundred percent made of metal and has a non.collapsible structure. On the pump housing there is a receiving hole for oil and a groove-channel, with which oil from the oil wire gets specifically into the pump. The mechanism is installed in the body of the chainsaw of the Stihl 180.

At the time of growth in the engine speed, the drum. the asterisk begins to twist the gear of the worm gear for the wire lever, and again it forces the oil pump plunger, and as a result, the oil begins to pump over the oil channels to the tire of the chainsaw.

In the works of the accounting system, perceives the specific role and the oil pipeline of the chainsaw, at the basis of which there is an oil receiver. The oil receiver is additionally filter. On the 2nd side of the oil hose, a rubber expansion was made, with which the hose is installed in the Stihl 180 chainsaw case immediately behind the oil pump.

As everyone knows, in this case there is nothing endless and over the years that our client has to be repaired. So the STIHL MS 180 oil system is no exception, and has its own special malfunctions. Let’s see them in more detail.

Signs of malfunction of the complex of accounting programs of lubrication, subsequent:

• The chain of the chainsaws is completely dry and does not even gleam;
• Oil from the oil tank does not leave;
• The chain is rapidly stretched and this situation occurs every time;
• The saw of the saw takes away when sawing, to the side;
• The tire heats up in the area of ​​the leading star, melting paint is observed.

Oil supply to the chain of the chain of the Stihl 180 chain

Construction and cottage in an understandable language

Repair supply of oil chainsaw STIHL 180

Each year, the technique becomes more perfect, which greatly simplifies the works of modern workers.New improved models arise on the market everywhere. Why flies a candle in a chainsaw. For the latest disassembly of the chainsaw of Stihl 180. But at least a tool asks for appropriate care. STIHL 180 chainsaw is no exception. In this article we will talk about how to correctly repair this tool.

Repair of the chainsaw STIHL 180

In order to correctly carry out repairs, you should deal with the internal mechanism. This rule applies to at least a tool. Let’s see the more popular difficulties that may appear when working with a chainsaw.

one.Owners often encounter a leak of oil, which usually lubricates the chain. It is necessary to remove the flywheel of the chainsaw of the Stihl 180 carburetor from the chainsaw. This may be a result of a bad density at the points of connection of the hose from the oil tank and pump.

To remove this case, the tool should be disassembled. Then you need to check the connections and if necessary change the hose to a high.quality analogue.

Read adjusting the carburetor of the chaedr chainsaw

If you cannot purchase a new hose, you should remove the old one and degrease the landing site and the hose itself. After which you need to install self.tightening clamps, which firmly provide the density of the compounds. Such an approach will decide this case.

Apart from this, it is recommended to check and clean the oil filter.

Stihl 180 oil supply repair

STIHL 180 Oil supply repair should be carried out if you saw that your chain is dry. Closely inspect the channels on which the oil is supplied and perfectly clean them. Channel clogging occurs quite often.

Diagnosis of the lubrication system of the chain of the chain of the Stihl MS180 chain

Self.repair of the chainsaw of the Stihl MS180. The style of the chainsaw is not lubricated. Dismantling the chainsaw of Stihl 180 Part 1 Vasiliy. Dismantling the chainsaw of the Stihl 180 chainsaw we find and eliminate the cause of the Samos

For better clarity, we recommend that you view the Stihl 180 Repair of oil supply video.

STIHL 180 Oil Production Repair Video Instruction of the user of the chainsaw of the Stihl MS180

If the saw does not start, you should carry out a thorough diagnosis of the tool. First you need to check the air filter and the performance of the candle. To do this, it should be unscrewed and dried.

Read Partner Gasopile stalls idle

If the fuel mixture is found on the candle, then there is an excess of fuel. Chain (14 ″; 1.3 mm for STIHL 180 14 Rezer PS-9-1.3-50 low price, chainsaws (536. The reason may be a poorly adjusted carburetor or violation of launching rules. See if access is opened by gasoline.

To do this, open and close the gas tank cover. It is also necessary to check the combustion chamber. After the work done, check the service of the candle and change it if necessary.

Description of the common malfunctions of the Stihl 180 chainsaw and ways to eliminate them. The cause of the breakdown may be clogged sapun. Here I tell and show the proportion of mixing oil and gasoline for the chainsaw of the Stihl MS 180. Not only telling but also show. Thus, when working in a tank with fuel, a vacuum forms, which affects the supply of fuel. This can happen due to an unresolved carburetor, the clogging of its channels or air filter.

To fix the problem, you should repair the valve, thanks to which the pressure is aligned when fuel is supplied. To do this, the sapun should be carefully cleaned with a needle.

Read Homemade machine for sharpening disk saws

To adjust the carburetor, you need to use three screws. the largest and most small revolutions. Adjustment should be carried out strictly according to the instructions for the repair of the chainsaw.

Remember that the carburetor is a very complex device, since it consists of many small parts, so it should be approached very responsibly to it and disassembly.

If you want a saw to work properly, you should constantly care for her. Do not forget to clean the air filter in a timely manner and lubricate the tool chain with only clean oil. With prolonged storage of the tool, it is necessary to remove gasoline and oil for the circuit from it. Then the saw will serve you for a very long time.

statements of outstanding people who will change your view of familiar things

These people can be called truly outstanding in their field. Innovators, great thinkers, scientists, inventors and famous writers left us not only their tangible works, but also well.aimed sayings, to which it is useful to listen at least occasionally. So, now just one of these points.

A strikingly accurate quote of Ford, which must be recalled in the moments of important decisions. Whatever the circumstances, it all depends only on you and your self.confidence. Wait for a miracle when you set yourself in advance to failure, no need. But believing in your strength, you can turn the mountains.

You will continue to remain unhappy until you think that others do you happy.

Your happiness depends only on you. No one is obliged to make you happy. neither family, nor friends, nor the second half. If you yourself are not able to make your life better, then what to expect this from someone else?

A smart person is happy only when he is awarded his own praise; The fool is content with the applause of others.

The fact that surrounding people approve of your actions and praise you for the results achieved does not mean anything compared to a sense of self.satisfaction. You yourself determine whether you manifest yourself with dignity, whether you really have been all over 100 %, are you contrary to your principles, etc. D. Most valuable when you yourself, not paying attention to the opinions of other people, you can be pleased.

Even people are used to talking about the same things in different words. The point is also in perception, double meanings and context. Saying even the simplest words, you cannot be sure that your interlocutor will correctly understand what you are trying to convey to him. Now think about how many quarrels arose due to banal misunderstanding.

It is good to talk about virtue. does not mean being virtuous, but being fair in thoughts does not mean to be fair in practice.

Words are just words. You can endlessly talk about how important it is to help others, make remarks to other people and act as a universal motivator, but if you yourself do not make a single attempt to act according to your fiery speeches, you penetrate the price for you.

Yourself to judge is much more difficult than others. If you are able to judge yourself correctly, then you are truly wise.

Judging yourself does not mean to condemn or engage in rigid self.criticism (and even more so. self.digging). It is important for each person to learn how to give the most objective assessment of himself and his actions. And criticizing others is a simple matter, but at the same time completely useless.

Good results are obtained by the one who knows how to wait. Of course, not only wait, but also work for the desired result. But agree: it’s foolish to dream of a high position when you are only at the beginning of your career path.

statements of outstanding people who will change your view of familiar things

These people can be called truly outstanding in their field. Innovators, great thinkers, scientists, inventors and famous writers left us not only their tangible works, but also well.aimed sayings, to which it is useful to listen at least occasionally. So, now just one of these points.

A strikingly accurate quote of Ford, which must be recalled in the moments of important decisions. Whatever the circumstances, it all depends only on you and your self.confidence. Wait for a miracle when you set yourself in advance to failure, no need. But believing in your strength, you can turn the mountains.

You will continue to remain unhappy until you think that others do you happy.

Your happiness depends only on you. No one is obliged to make you happy. neither family, nor friends, nor the second half. If you yourself are not able to make your life better, then what to expect this from someone else?

A smart person is happy only when he is awarded his own praise; The fool is content with the applause of others.

The fact that surrounding people approve of your actions and praise you for the results achieved does not mean anything compared to a sense of self.satisfaction. You yourself determine whether you manifest yourself with dignity, whether you really have been all over 100 %, are you contrary to your principles, etc. D. Most valuable when you yourself, not paying attention to the opinions of other people, you can be pleased.

Even people are used to talking about the same things in different words. The point is also in perception, double meanings and context. Saying even the simplest words, you cannot be sure that your interlocutor will correctly understand what you are trying to convey to him. Now think about how many quarrels arose due to banal misunderstanding.

It is good to talk about virtue. does not mean being virtuous, but being fair in thoughts does not mean to be fair in practice.

Words are just words. You can endlessly talk about how important it is to help others, make remarks to other people and act as a universal motivator, but if you yourself do not make a single attempt to act according to your fiery speeches, you penetrate the price for you.

Yourself to judge is much more difficult than others. If you are able to judge yourself correctly, then you are truly wise.

Judging yourself does not mean to condemn or engage in rigid self.criticism (and even more so. self.digging). It is important for each person to learn how to give the most objective assessment of himself and his actions. And criticizing others is a simple matter, but at the same time completely useless.

Good results are obtained by the one who knows how to wait. Of course, not only wait, but also work for the desired result. But agree: it’s foolish to dream of a high position when you are only at the beginning of your career path.

acute quotes of the incredible Faina Ranevskaya, which every woman should read

Who does not like Faina Ranevskaya, he simply does not know her work. The second such a strong, confident and amazing woman is simply impossible to find. We are interesting to know we admire the sparkling humor of the actress and present her selected quotes.

If a woman tells a man that he is the smartest, then she understands that she will not find a second fool.

The family replaces everything. Therefore, before you get it, you should think what is more important to you: everything or family.

Something for a long time did not tell me that I am a BLD. I am losing popularity.

Under the most beautiful tail of the peacock, the most ordinary chicken ass is hidden. So less pathos, gentlemen.

If a man likes, show him everything you are capable of. Withstand, it means this is your man!

What to do with plastic surgery? I update the facade, but the sewage system is still old!

Of course women are smarter than men! No, well, you have heard at least once that a woman lost her head from the beauty of male legs?

I noticed that if there is no loaf, sugar, fatty meat, do not drink beer with fish. the muzzle becomes smaller, but more sad.

There are people who just want to approach and ask if it is difficult to live without brains.

The worst weapon is the phone in the hands of a drunken woman.

Let the idiots and clowns from your life. The circus should tour.

Take care of your beloved women. After all, while she scolds, worries and freaks out. she loves, but as soon as she begins to smile and relate indifferently. you lost her.

acute quotes of the incredible Faina Ranevskaya, which every woman should read

Who does not like Faina Ranevskaya, he simply does not know her work. The second such a strong, confident and amazing woman is simply impossible to find. We are interesting to know we admire the sparkling humor of the actress and present her selected quotes.

If a woman tells a man that he is the smartest, then she understands that she will not find a second fool.

The family replaces everything. Therefore, before you get it, you should think what is more important to you: everything or family.

Something for a long time did not tell me that I am a BLD. I am losing popularity.

Under the most beautiful tail of the peacock, the most ordinary chicken ass is hidden. So less pathos, gentlemen.

If a man likes, show him everything you are capable of. Withstand, it means this is your man!

What to do with plastic surgery? I update the facade, but the sewage system is still old!

Of course women are smarter than men! No, well, you have heard at least once that a woman lost her head from the beauty of male legs?

I noticed that if there is no loaf, sugar, fatty meat, do not drink beer with fish. the muzzle becomes smaller, but more sad.

There are people who just want to approach and ask if it is difficult to live without brains.

The worst weapon is the phone in the hands of a drunken woman.

Let the idiots and clowns from your life. The circus should tour.

Take care of your beloved women. After all, while she scolds, worries and freaks out. she loves, but as soon as she begins to smile and relate indifferently. you lost her.

§ 83. Letters h and With At the end of the consoles

Compare the pronunciation and writing of the final consonant in the prefixes. Which letter is used in prefixes before calling consonants, and which. before the deaf?

RaZRFuck. RaArtclick; BeZvSome. beaccountprisoner; sttrembling. Sunwalk; inzgSitting. inspRotter.

In prefixes on -Z/-s Before calling consonants is written h, And in front of the deaf. With.

RazbRemove (before the call.); RaspIsland (before the deaf.).

Select the correct spelling and designate the conditions for choosing letters h or With.

A sample of oral reasoning. In the word silent prefix demon- It stands in front of the letter Sh, which denotes a deaf consonant. The letter “ES” is written at the end of the prefix.

Be.painful, be.Paid, be.trump card, in.reward, in.sing (feat), in.wave, c.Shout, neither.return (from height), and.To die, and.spoil.

Write down words with prefixes on -Z/-s in two columns, indicate the studied oogram.

Be.Noisy, be.numerical, (s, h) give, ra.Draw, ra.Gradually, be.Sensual, ra.move, (s, h) to burn, ra.To burn, be.Life, ra.Shchelin, Be.delicious.

RaSSVet RAstVet RAspIsland

Write 7-8 words with letters h and With At the end of the consoles. Explain the spelling of these letters. What parts of speech are the words you recorded?

Write down the words in two columns: 1) with h at the end of the prefix; 2) p With At the end of the console. How many prefixes are in the highlighted word?

AT.Dag, ra.look, (s, h) to rule, and.edit, ra.Color, (C, h) run, ra.Running, be.Brazhny, c.Cram into, be.Assistant, ra.Rely, in.voice, be.Border, and.Frost 2. Be.limit 2. Ra.edit, ra.Surrender, ra.Print, be.solid, chap.measured, ra.Watch, ra.light, (s, h) write, ra.Scripture.

Make sentences with these words and phrases.

On schedule, ra.give notebooks, ra.cover, (s, h) rub from the board, correction of errors, ra.Boar, c.Remember and tell, ra.watch the table, in.Use the rule.

Pick up to each of these words the same.rooted with prefixes Once- (Ras-) and With-. Write them in two columns

Beat, let, give, saw, load, burn 1. row, do, clean.

Distribute the words into three groups: 1) with the prefix With-; 2) with the prefix on -h; 3) without a prefix (in these words h enters the root).

Ra.to give.give 1 run, and.run.DES.Denmark.beat, ra.beat.do it.act.start.Road.Draw, ra.Put, in.Chick, Ra.Push, ra.It is said, neither.Kiy.It is said.Dister.

AT(?) go to KV.Rtiru, about.Put the room.Tu, ra.Put furniture.drag a chair, ra.Rely on the d.Vanya, Ra.Plan time.Time windows, p.paint the doors, on the vastness of b.Londe, ra.Geranium bloomed, p.weigh the shelf for books, magazines, throw.R, ra.stroke Ra.sewn p.Lotent.

Choose the same root with these prefixes to these words. Designate the conditions for selecting satin letters. In what words did you write double consonant letters? Why? Make and write down phrases with the words placed in the frame.

Read. Prove that the text is in front of you. Watch out any three paragraphs to choose from. Designate the prefixes. Why are the dash at the beginning of the lines?

P.There were two girls (?) Ki in the field. They go by the field and see:.AT ALLOM MAC. Under.There were a girl (?) ki to ts.TKU and ask:

Girl (?) ki ne.Ko bowed tsv.TKU MAKA. He is t.what a scarlet, like the blood of a hero.

§ 83. Letters Z and s at the end of the prefixes

Compare the pronunciation and writing of the final consonant in the prefixes. Which letter is used in prefixes before calling consonants, and which. Before the deaf?

In prefixes on -Z/-s Before calling consonants is written h, And in front of the deaf. With.

Select the correct spelling and designate the conditions for choosing letters h or With (cm. Sample in the previous rule).

Sample of oral reasoning in a word Silent console demon- It stands in front of the letter Sh, which denotes a deaf consonant. The letter “ES” is written at the end of the prefix.

Be.painful, be.Paid, be.trump card, in.reward, in.sing (feat), in.wave, c.Shout, neither.return (from height), and.To die, and.spoil.

Write down words with prefixes on -Z/-s in two columns, indicate the studied oogram.

Be.Noisy, be.numerical, (s, h) give, ra.Draw, ra.Close, insensitive, ra.move, (s, h) to burn, ra.To burn, be.Life, ra.Shchelin, Be.delicious.

Write 7-8 words with letters h and With At the end of the consoles. Explain the spelling of these letters.

What parts of speech are the words you recorded?

Write down the words in two columns: 1) with h at the end of the prefix; 2) p With At the end of the console. How many prefixes are in the highlighted word?

Make sentences with these words and phrases.

Pick up to each of these words the same.rooted with prefixes once- (races-) and With-. Write them in two columns.

Beat, let, give, saw, load, burn 1. row, do, clean.

Sleep

Meaning: extreme degree of fatigue, very strong sleep.

Origin: The basis of phraseology is the behavior of horses and dogs during sleep. If the horse is exhausted, it can collapse and immediately fall asleep in order to restore strength as soon as possible. If a person says “sleeps without hind legs”, then this is a person exhausted to the limit, who is sleeping in one position because of fatigue and does not even move in a dream.

Inside out

Origin: in Russia it was a synonym for something shameful. “Shivorot” is a boyar collar indicating the status of the owner. But if the nobleman fell into the disgrace of the sovereign, he was put on his horse his back forward, putting on his clothes inside out, and drove a crowd around the city for a fun.

Meaning: an old virgin, a woman in which there is no femininity and charm that has abandoned family life for the sake of work or science.

Origin: The expression appeared in England in the 1760s. Then, in the cabin of writer Mary Wartley Montagu, a literary circle formed, where scientific topics were discussed. One of the members of this circle was a scientist Benjamin Stellingflit, who wore blue stockings. When he was not at the next meeting of the circle, the ladies said: “We cannot live without blue stockings, today the conversation is bad. there are no blue stockings!””.

Hence the circle received the ironic name “Society of the Blue Stocking”.

Over time, “blue stockings” began to be called women who were fond of science and neglecting home and family values.

STIHL 180 oil pump malfunctions

How to independently repair the malfunctions of the Stihl chainsaw: tips

The consumer can repair the chainsaw of the Stihl chainsaw independently due to the simplicity of the design. The instrument that proven in the construction segment has a capacity of 1400 W, the engine volume 31 cubic meters. cm.

The most common types of chainsaw faults

Operation of the Stihl 180 chainsaw is carried out in accordance with the instructions attached to the tool. The user includes the starting system after it is convinced of the presence of oil, gasoline, and will conferrate the correctness of the tension of the chain.

Working with the tool begins after its safe fixation in the hands. If the instrument fails, it is necessary to determine what caused by the malfunctions of the chainsaw of Stihl.

The reasons that caused a tool malfunction can be:

• the appearance of leaks in the oil system;
• the formed cliffs in the crankcase;
• carburetor malfunctions;
• air entering the crankcase through the seals;
• worn condition of the worm gear in the oil pump;
• a spark does not appear on the cross.section of the ignition;
• wear of the leading star;
• Violation of the integrity of the eye under the control lever.

For self.repairs, out of order, the Stihl chainsaws, tools that are in stock of each consumer are used.

• screwdrivers;
• end and wrench keys;
• hexagons;
• vacuum meter used to determine defects in oil seals, carburetor, crankcase;
• the air compressor used in purging and cleaning of components and assemblies;
• T-shaped key STIHL Torx 27;
• Stop.limiting stroke of the crankshaft;
• The puller for the bearing.

Actions when detecting a malfunction in various parts of the unit

Unpleasant phenomena such as power loss, lack of connection, and idle support are common. The reasons for this behavior of the tool are the malfunctions of the carburetor of the chainsaw. This is expressed in pollution by particles of dust, sawdust. Such a breakdown is eliminated without problems independently.

Carburetor cleaning is carried out using:

Replacing the oil pump of the chainsaw STIHL 180

Replacing the oil pump of the chainsaw STIHL 180

Keep the pile of the saw chain under control. in case of damage to change. 9.32 mm (3/8 ”)-Picco-Micro the thickness of the leading link 1.3 mm (0.05 ”) Profile chain sprocket: 6 teeth for 3/8-Picco System Lubrication System: an oil pump, depending on the frequency. STIHL MS 180 chainsaws. an unexpected tool created to harvest woody rock and other systems of wood work. Apart from this, the STIHL MS 180 saw has 2 tanks created for gasoline and for oil consistency. Repair of the chainsaw of the Stihl MS 250 Part 2 does not pump the oil pump replacement of the STIHL MS180 oil pump drive (worm gear). Replacing the STIHL MS180 oil pump drive (worm gear). Repair of the chainsaw STIHL MS 250 Part 2 does not pump the oil pump. Replacing the STIHL MS180 oil pump drive (worm gear) NBSP. Hello everyone, tell me how to remove the oil pump on the chainsaw of Stihl 180. Symptoms. there is an oil with bubbles that are professionally enough to clean and adjust, and if the load was decent, you can think about replacing piston rings and crankshaft oil seals. Stihl MS 180 / Stihl 180 Small tricks increase in air filter efficiency. Duration: 5:09 Pavel Sergeevich 51. Replacement of the oil pump PART REL = 0; CONTROLS = 0; Showinfo = 0; IV_LoAD_POLICY = 3; ” Frameborder = “0 ″ allowfullscreen

Read saws a bad chainsaw causes and methods of elimination

Stihl ms180 replacement of oil pump and oil drive

MS180 Bulletin pump and gear oil.

Diagnosis of the lubrication system of the chain of the chain of the Stihl MS180 chain

The main reasons why STIHL 180 oil does not come

Often, the oil system is damaged in the Stihl 180 chainsaw. The solution to this problem must be started with a thorough inspection of the hose along which oil is supplied.

Replacing total: from oil to carburetor. The reason for the breakdown of your Stihl chainsaw 180. not amenable to adjustment of no gas. Diagnosis of the lubrication system of the chain of the chain of the Stihl MS180 chain. The scoop of oil sawdust threw it after cleaning (12 years of saw).It is unlikely but could and throw out the repair of the Chinese chainsaw of the STIHL MS 660. Replacing the presenter.

I have a STIHL MS 1 saw. When pressing gas until it stops. Glakes. After cleaning the carburetor, the problem disappears, but again begins to appear in ten minutes. How to replace an oil filter with Stihl 2.

Very short hose in an oil tank. How many provisions on the STIHL 2 throttle switch. Please tell me. How the clutch clutch is removed by Stihl MS 1.

Read how to set up a chapter from large revolutions

In this case, how to properly stall the crankshaft to remove the coupling?). The leash of the oil pump drive is spinning without effort. This means that he has broken up with the pump? Is it possible to eliminate disassembly and assembly, or will it be required spare parts? What gasoline is the Husgvarna chainsaws? Good afternoon! He jammed his head on the FS3 spit.

After her dismantling, it was found that the shaft rotates freely inside the hexagon responsible for rotation of the head. Does it make sense to mess with the replacement of the shaft and if so, is it possible to do it yourself? Thanks! How to insert a flexible shaft into the shank on the Stihl fs 3.

Our contacts are prefabricated on the site in the section If you did everything right, then the reason can only be in oil, which oil do you use?

Check the saw. The piston is stopped with a special stopping piston (art. MS- 1. 80- 8. 80, TS- 8. The leash of the oil pump drive should rotate freely, what happened to you? The tip changes in the service center for 5 minutes using a special tool. An important point: when replacing a drive shaft or at home, it is problematic to do this, it is possible to damage the bar and the shaft.