Can I mow wet grass with a trimmer?

Can an electric lawnmower mow wet grass?

and more often they are not just a place to grow fruit and vegetables, but also a place to relax. There are areas on which to put a gazebo with a barbecue and break up flower beds and lawns. To have a lawn like this you don’t need to put much effort: just water it in time, and mow it.

As soon as the lawn grass seeds have been sown, one must immediately wonder what tools are needed for mowing the lawn. It is not possible to make a straight cut with a simple scythe. Many different tools are available for this purpose:

grass trimmer

It consists of a rod with handles, a special spool and a motor that can be electric or gasoline. Reel has a bobbin on which a special line for trimmer or a knife is wound.

Pay attention! Electric grass trimmer simply plugged in and it’s ready to go. It is light, handy, but its work requires a long wire and the presence of a socket, which is not always convenient. Mowing a large area would be difficult.

  • Low-power. Comfortable, lightweight, but can not cope with hard, wet grass and weeds.
  • Powerful. Available with bottom-mounted and top-mounted motor. A special blade can be installed, allowing you to mow coarser grass. Models with a bottom-mounted motor can not mow wet grass.
  • Cordless. lightweight, mobile. The disadvantages are that the battery lasts only one hour.

Gasoline-powered trimmers are heavier than electric mowers, but they’re portable. It has a forged shaft, shoulder straps and a powerful power drive. Gearbox design allows you to use not only a line for the trimmer, and the knife and toothed disc, which greatly improves the quality of treatment of the site. The gasoline mower can mow very large areas.

Trimmers can mow in hard-to-reach places (under benches, near pillars), as well as mow paths regardless of their location.

Lawnmower

It’s clear why this machine is called that. it’s a lawn mower. Looks like a cart on wheels with special blades and a device for collecting mowed grass. Lawn mowers come in different models:

As with trimmers, gasoline lawn mowers are mobile, can work far from home. But they have a lot of weight, more difficult to use and also they make a lot of noise.

Electric motor lawnmowers are lightweight, do not make much noise, are well cleaned, absolutely harmless to the environment. The disadvantages include the need for nearby power supply.

Cordless shears are good: a little noise, smooth lawn, easy to work, but the battery lasts for a certain period of time.

Spindle mowers are those without a motor. The device is designed as if the lawn is cut with scissors. It turns out very nice and neat, but the process is very time-consuming.

Lawn shears

This tool is used where neither a lawnmower nor a trimmer can do the job.

Can I mow in the rain?

Gardeners often don’t know whether they can mow wet grass with an electric lawnmower. Unlike a hand lawn mower, you shouldn’t mow wet grass with a petrol mower. but not with an electric one. When working with an electric trimmer or a similar lawnmower, moisture can get into the drive or wires, a short circuit will occur, and at best the tool will burn out, and at worst the operator will suffer.

It is not worth working after a downpour and with gasoline-powered machines. Grass becomes heavier, leading to premature tool failure. The piston assembly and other moving parts are the first to break down because of overheating.

Important! If it is impossible to postpone the work, you should take breaks every 10-15 minutes and let the tool work at idle speed.

The lawn may also be damaged. The ground will be moist, the grass will be furrowed and cut in unsightly strips. Young plants may be pulled up with their roots, and the cut of older grass may be uneven, torn, and this may lead to diseases. Grass after trimmer for the grass will also be spread unevenly, which can lead to bald spots on the even surface of the lawn. It turns out that you can mow damp grass with a petrol mower, but it would be better to mow at a different time.

Types and construction of trimmers

Depending on the power source for the engine, grass trimmers are divided into gasoline and electric. The first type is equipped with a tank for fuel and lubrication, the second works on the mains or battery.

The design of the gasoline grass trimmer

All of the machine’s components are mounted on a long metal bar. On its upper end is the gasoline tank, the internal combustion engine and the starter for starting it. At the lower end there is a spindle, which rotates counterclockwise. On it a spool with a fishing line or sharp knives (discs with teeth) made of steel or plastic is mounted. Inside the boom, which is a hollow tube, there is a rigid or flexible shaft that transmits the rotation from the engine to the tool.

For your information! If the boom is straight, a rigid shaft is used that connects to the gearbox above the spindle and transmits torque to it from the drive. If the rod is bent, there is no gearbox, and a flexible shaft is used.

In the middle of the boom there is a handle-holder, which can be D-shaped or bifurcated, similar to a bicycle handlebar. Asymmetrical folding handles (like Husqarna brushcutters) are very handy. Buttons and levers for trimmer control are on the handlebar or shaft. Motor, control elements and coil/disc are connected by a flexible cord. The booms come in one piece, collapsible and telescopic versions. The length of the last two types can be changed to adjust to the height of the individual. Some models have fasteners for lap belts. Disc or spool (bobbin) is covered with a shield to protect the person who mows the grass.

Cutting tool is a spool with a trimmer line (cord, string) with a diameter of 2-3 mm wound inside. In some models, the line for the trimmer is wound with a reserve, and with a light impact on a hard surface, it automatically slides out of the bobbin. Other trimmers have a piece of cord inserted in the reel, and the excess length is cut off against the sharp edge of the shroud.

In addition to the line, some brushcutters come standard with a disc with sharp serrated edges. Different tooth shapes are possible. To cut down branches and bushes, use a knife nozzle or a cutter similar to a circular saw blade.

Side note! Other attachments can be added to some models of trimmers: a brush, a chain saw, a soil cultivator.

Controls for the gasoline trimmer

On the drive is a rotary knob that moves or closes the air damper. It is used to start the engine faster, for example, to warm it up when it is cold outside. Other controls are on the handle-holder or boom of the device:

  • throttle trigger. controls the carburetor choke to change the amount of fuel going into the actuator;
  • Stop button. designed to break the ignition circuit, stops the engine;
  • A button under the stop button to prevent accidental pulling of the throttle trigger;
  • Gas trigger lock. without it you have to use your finger to hold the starter lever for extended periods of work.

Design of an electric grass trimmer

In general terms, electric trimmers are similar to lawnmowers: a motor, a handle and a cutting element are attached to the boom.

Also nota bene! The electric motor in a grass trimmer can be at the top, at the end of the boom, or at the bottom, above the cutter housing. No gearbox in the second case.

The power tool needs to be plugged into an outlet, so you’ll need an extension cord to mow larger areas. While the reach of a cordless electric mower does not depend on the length of the cable, but the batteries do need to be recharged and replaced in time.

Electric trimmers have an on/off button instead of a starter motor. On them, unlike their gasoline counterparts, you can not adjust the number of spindle speed, so there are significantly fewer control buttons on the device.

As a side note! Both types of trimmers have a cutting width of 22-42 cm with fishing line. And when using discs or knives, this indicator is directly related to the diameter of the nozzle.

Features of the grass trimmer work with a fishing line and with a cord

Trimmers for grass are more delicate machines than full-fledged electric or lawn mowers. And the grass trimmer that works not with cord, but with a fishing line. an even more delicate device. Cord. essentially a wire. can damage the lower part of the trunk in young trees that goes to the root, which is not the case with a fishing line. When grass stems are thick. such as weeds that have taken root. the trimmer line may not have enough time to cut through all the weeds.

Manual and automatic grass mowing modes have differences. Grass trimmer automatics ejects the trimmer line every time the motor starts.

Despite the obvious convenience, on uneven and irregular areas, mowing the grass in one place and moving to another, you restart the motor. The solution. switch to semi-automatic control: grass trimmer in the working part has a separate button, easily pressed when the head of the drum in contact with the ground. The trimmer line will immediately fall out of the cutting section.

Length of line should not be more than 15 cm in working condition. A longer trimmer line gets tangled, a shorter one won’t cut effectively. The optimum line diameter is 2-3 mm.

Aspects of working with a fishing line. Practice

Those who have ever tried to mow grass in the dew or in drizzling rain have noticed that vegetation clinging to the blade on the spindle spreads in clumps over the lawn. If they are not removed in good time, the lawn becomes sagged in places where wet grass falls. The cuttings are beginning to rot and the lawn is starting to hurt. This is how unsightly sagging occurs.

So decide for yourself, dear readers, whether you can mow wet grass trimmer and lawn mower, if not in spite of this willingness to bring the lawn in order before the coming of the cold weather.

Arrangement of a country site (and even the adjoining territory in the city). a very complex matter. Especially because we have to constantly take care of the economy. Many people have questions about how to do this or that work, for example, can you mow wet grass with a trimmer.

Features of the situation

Of course, such a question will not arise for those who live in the immediate vicinity of the lawn. Then you can wait a while and work when the grass is dry. But the need to clean wet grass arises immediately, if you can visit the site only occasionally. What to do if you have to mow the lawn at the weekend, on a different day with rainy weather, here is the subtlety. Opinions of the dacha owners themselves differ, so it makes little sense to focus on their position. It is necessary to understand the nuances on your own.

With what can we mow grass on the site

As soon as the lawn grass seeds have been sown, you should immediately wonder what tools you need to mow your lawn. A simple mower does not cut evenly. There are a lot of different tools for this purpose:

Lawn trimmer

Represents a rod with handles, a special spool and a motor, which can be electric or gasoline. The spool has a bobbin, on which a special line for trimmer or a knife is put on.

Please note! An electric grass trimmer is simply plugged in and it’s ready to go. It is light, handy, but its work requires a long wire and the presence of a socket, which is not always convenient. Mowing a large area will be difficult.

  • Low-powered. Comfortable, lightweight, but can’t handle tough, wet grass and weeds.
  • Powerful. Available as low-motor and high-motor. A special blade can be installed, allowing you to mow coarser grass. Lower-mounted models cannot mow wet grass.
  • Cordless. lightweight, mobile. The disadvantages are that the battery charge lasts only for an hour.

Gasoline-powered grass trimmers are heavier than electric mowers, but they are more portable. It has a forged shaft, has shoulder belts and a powerful power drive. The gearbox design allows you to use not only a line for the trimmer, as well as a knife and a toothed disc, which greatly improves the quality of processing the area. The gasoline lawnmower can mow very large areas.

The trimmer can mow hard-to-reach places (under benches, near pillars), as well as mow paths regardless of their location.

Lawnmower

You can see why it’s called a lawn mower. Looks like a cart on wheels with special blades and a device for collecting clippings. Lawn mowers come in various models:

As with trimmers, gasoline lawnmowers are mobile, can work away from home. But they weigh a lot, are more difficult to use and make a lot of noise.

Lawn mowers with electric motors are lightweight, do not make much noise, are well cleaned, are absolutely harmless to the environment. The disadvantages include the need for nearby power supply.

the battery-powered ones are all good: not much noise, smooth lawn, easy to work, but the battery only lasts a certain time.

Spindle mowers are those without a motor. The device is designed as if the lawn is cut with scissors. It turns out very beautiful and neat, but the process is very time-consuming.

Lawn shears

This tool is used where it is impossible to work with neither lawnmower, nor trimmer.

Can I mow in the rain?

Gardeners often do not understand whether it is possible to mow wet grass with an electric lawnmower. Unlike a hand-held grass mower, you should not mow damp grass with a gasoline lawnmower, and certainly not with an electric one. When working with an electric trimmer or lawn mower moisture can get into the drive or wires, you will get a short circuit, and at best the tool will burn out, and at worst. and the operator will suffer.

It is not a good idea to work after a downpour or with gasoline-driven machines. The grass becomes heavier, which leads to premature tool failure. The piston assembly and other moving parts are the first to break down because of overheating.

Important! If you can not postpone the work, you need to take breaks every 10-15 minutes and let the tool to work at idle speed.

The lawn can also be damaged. The ground is made wet and the grass cut in unsightly strips. Young plants may pull out with their roots, older grass may get an uneven, jagged cut, and this may lead to disease. Grass after the grass trimmer will also be spread unevenly, which can lead to bald spots on the even surface of the lawn. It turns out that you can mow damp grass with a petrol mower, but it’s better to mow at a different time.

Can I mow in the rain?

Gardeners very often do not understand whether it is possible to mow wet grass with an electric lawnmower. Contrary to a hand lawnmower, it is not a good idea to mow wet grass with a petrol lawnmower. and an electric one is not a good idea at all. When working with an electric trimmer or lawn mower, moisture can get into the electric drive or cables, it will cause a short circuit, and at best the tool will burn out, and at worst the operator will suffer.

Block: 3/5 | Character number: 455

Height adjustment on the lawnmower

Lawn mowers are designed to adjust the height of the cut. The range can vary from model to model. Manufacturers of equipment indicate the minimum and maximum value of this parameter in the accompanying documentation. The inexpensive models usually have 3 different height positions, while the more expensive and advanced models may have 5-7 regulator positions.

For rough lawn care, you usually choose a model with a wider range of height adjustment.

The technical solution for selecting the cutting height can vary from model to model. There are two types of adjustment: manual and mechanical. The first involves stopping the engine and acting to change the regulator position manually. The mechanical method allows you to change the height of mowing by pressing a button on the control lever, with no need to interrupt the process.

Block: 3/6 | characters: 871

The role of the equipment

From the outset, it should be pointed out that there are two main types of trimmers, which differently “treat” wet vegetation. Some machines have a gasoline motor, others are powered by electrical hookup or battery installation. electric mowers, in turn, are divided into two subgroups: with the location of the motor at the bottom or at the top of the machine. Only gasoline grass trimmers or hand-held grass trimmers can remove wet grass safely enough for the user.

Using an electric mower in such a case is categorically undesirable. It is often said that this requirement applies only to lowermounted machines. Such an electric motor comes directly in contact with water. Because of this contact, there is a danger of a short circuit.

However, using a top-mounted electric lawnmower after it has been raining should also be avoided.

If water ever gets inside the powerpack, not only is there a risk of a short circuit, but also of an electric shock. It should be noted that these restrictions apply not only to grass trimmers, but also to complete lawn mowers. Assurances of manufacturers and marketers about safety should not be taken into account. To minimize the risk to yourself and your equipment, it is worth using a chain saw. But there are a few more nuances that must be taken into account.

Even if the mowing machine will not fail, and its owner will not be electrocuted (let’s assume such a favorable situation for a minute), it is still impossible to mow wet grass with an electric trimmer. This is a known abnormal mode of operation, due to which the equipment wears out too quickly. Wet vegetation provides much more resistance to the cutting elements than it should. That’s why even very well insulated motors work with overload.

Wet grass adheres to the blades and spindle and causes an increased stress on the blades and spindle. There is no way to avoid it and all the skill of the mowers and all the methods and schemes of clearing the lawn do not help. Not only the motor but also the shaft suffers and can sometimes rotate.

Problems when mowing wet grass can also occur with gasoline-powered machines. Yes, they are more powerful than their electric counterparts, but the load is still higher than normal. Pistons and other moving parts are the first to get hit. If there is no choice but to use a gasoline mower, you need to take care of it. If you mow damp grass, periodically set the device to no-load idle mode. 30 seconds is just enough time to dissipate excess heat and also to conserve the life of the grass trimmer.

But it’s not as easy as it sounds. Another reason to mow dry grass is that cutting a wet lawn is bad for the vegetation itself. If you look closely, it’s easy to see that no straight cuts appear, but it looks like the cuts are torn. Notched spots on the stems dry out and the grass turns yellow. You can reduce the risk a little by using a thinner trimmer line. According to reviews, square or star-shaped lines allow even wet lawns to be mowed evenly. But there is another problem: the cut plants are scattered unevenly, and in the form of piles, which must necessarily be removed as soon as possible, so as not to appear spills.

When they talk about mowing wet grass, you need to distinguish between the following possible situations:

In the first case it is quite possible to risk and try to restore order with a gasoline mower. In the second, mowing is impractical. In the third, you’ll have to do something about the moisture first and only then get your lawn or lawn in order. If you often have to mow wet grass after the rain or “on the dew” on a small area, it is better not to use a trimmer for the grass, and not a lawnmower, but a simple handheld mower. It is necessary to look not only at the grass that is removed, but also at the one where the mains wire is placed.

Moistening it can be a very serious risk factor. To mow grass after rain, you have to wait a little longer. A few minutes, even in a great hurry, will not noticeably reduce the time you can dedicate to mowing.

And the result can clearly be better. Mowing grass in the dew, even with an electric lawnmower or electric trimmer, is usually allowed.

Why you shouldn’t mow wet grass with a trimmer

There are also indirect reasons why it is impossible to cut grass wet from dew or rain in the garden. These include:

How can you turn off the shieldcorise by cutting damp vegetation? It’s as simple as that. It shows up as a result of a short circuit when water enters the power compartment. In addition, even if all very well sealed, there is a good chance that the engine will not be able to cope with the heavy load placed on the shaft of the trimmer flex. And the shaft itself can turn around. Such stresses most often occur when wet grass is applied to the blades and to the spindle to which they are attached.

For trimmers with gasoline engine mowing grass in wet weather through heavy loads increases the degree of wear on the main components and assemblies. Here you may notice premature failure of the piston pair, as well as other moving parts. The piston most often fails because of engine overheating. In our case, the motor will overheat because of the load created by the wet grass in the skew.

If you mow wet grass with a gasoline trimmer, let the engine idle for thirty seconds without load to avoid overheating the engine. That way you remove excess heat and save a couple of pistons.

trimmer for grass

It is a boom with handles, a special spool and a motor that can be electric or gasoline. In the spool is a spool, on which wind a special line for trimmer or put than.

Note! An electric grass trimmer is easy to plug in and ready to work. It is lightweight, handy, but it requires a long wire and socket, which is not always convenient. Mowing a large area will be difficult.

  • Low power. Comfortable, lightweight, but can’t handle tough wet grass and weeds.
  • Powerful. They come with a lower motor and an upper motor. For cutting coarse grass, you can install a special blade. Models with a lower motor do not cut wet grass.
  • Cordless. Lightweight, mobile. The disadvantages include the fact that the battery lasts for an hour.

READ Electric grass trimmer For grass How to change a line for a trimmer

Gasoline-powered grass trimmer is heavier than an electric mower, but differs from it in mobility. He forged shaft, belts and powerful drive. The gearbox design allows you to use not only a trimmer line, but also a knife and toothed disc, which greatly improves the quality of treatment of the site. With a gasoline mower, you can mow very impressive areas.

With a grass trimmer you can mow grass in hard-to-reach places (under benches, near posts), and also mow paths regardless of their location.

Lawn mowers that run on electricity are unsafe

We all know you should not swim in a river, pond or sea during a thunderstorm. But then why use an electric lawn mower on a wet lawn? You also run the risk of getting an electric shock. When you mow wet grass with an electric mower, there is a risk of damage to the mower due to exposure to moisture. It can also potentially cause injury to the person operating the mower.

Did you know that mowing a wet lawn is much more difficult?

You enjoy looking at a flat, mowed lawn? But did you know that if you mow a wet lawn with a gasoline or electric mower, you are unlikely to get that perfect result? The fact is that the wet blades of grass have a harder time cutting evenly. But in the end it leads to an uneven lawn. This is especially true for portable mowers. So if you really care about your lawn, it’s worth waiting until it is completely dry.

Of course, the choice of gasoline trimmer for grass should be based on the parameters that are optimal for you and most satisfying, both in terms of technical characteristics and cost. Consider a few models that are the most popular and many consider them the best gasoline trimmers.

Husqvarna 545RX gasoline grass trimmer

Manufactured in Sweden. The quality of products industrial company Husqvarna is unquestionable, the price is appropriate. As for the specific model, it is:

is characterized by high productivity;

  • easy to work because of the optimally selected boom length and gearbox setting angle, which allows the cutting part to be in a position parallel to the ground;
  • The handle angle is adjustable;
  • The trimmer head is equipped with a protective cover that prevents injury by flying out small stones and debris;
  • The shoulder straps have soft pads, are very comfortable and convenient;
  • Thanks to the use of X-Torq technology, the engine is economical and harmful emissions are low;
  • Quick engine and starter motor start-up;
  • You can always see how much fuel is left, because the tank is transparent.

Red Star ST 725 petrol grass trimmer

Gasoline trimmers for grass, produced by the manufacturer Red Star are suitable for use in large-scale work, as well as small garden plots. The Red Star ST 725 e grass trimmer is ideal for country houses. It has these characteristics:

  • The cutting line has a cutting width of 41 cm;
  • The 4-stroke blade captures a 25 cm swath;
  • equipped with an 809.1 W motor (1.1 l.с.) with a volume of 25 cm3;
  • grass trimmer boom is straight, detachable, which allows the use of attachments;
  • Red Star ST 725 e weighs less than 7 kg.
  • easy to operate, since.к. low weight;
  • A good combination of relatively low weight and high power;
  • comfortable shoulder straps.

Champion T263 grass trimmer

Manufactured in northern China by Champion, which is headquartered in the U.S. Champion T263 is a petrol mower of small power and an excellent option for home maintenance. Grass trimmer technical features:

  • engine power. 698,7 W or 0,95 l.с. with a volume of 25.4 cm3;
  • both the trimmer line with a thickness of 1.6 to 3 mm and the 3-blade blade with a diameter of 22.5 cm is used as a working tool;
  • the shaft rotates at 8000 rpm./min.;
  • Grips up to 0.4 m with a fishing line and 0.255 m with a knife;
  • weighs 5,7 kg;
  • Manufacturer comes with a 12-month warranty.
grass, trimmer

The advantages of Champion T263 include:

  • D-shaped comfortable handle and shoulder strap;
  • Availability of repair kit, safety glasses, gloves, protective cover, a container for petrol and oil mixture in the kit of the trimmer.

How to use a grass trimmer

Grass trimmers are effective. Beginners think that operating a lawn mower is pretty easy because you just need to plug it in or fill it up with fuel, but that’s not true.

The effectiveness and service life of garden tools depends on usage conditions. Therefore, preparations must be made before using a grass trimmer.

READ Can I mow wet grass with a chain saw?

Carefully inspect the lawn that you can mow the grass with. Be sure to remove glass and large rocks. If they fly out from under the working mower, they can injure people. Remove the wire from the lawn because it can become wrapped around the rotating element, breaking the mower.

Then go on to install the cutting system. There are small power grass trimmers on the market that use only a trimmer line. Designed for mowing lush and soft grass. But there are models over 1 kilowatt that are equipped with metal blades. They trim sown thistles and other hard weeds and trim young shrubs.

To replace the cord on the blades, you need to unscrew the attachment nut, install the cutting element. Then the nut should be put back in place, tighten with a wrench.

The operator has to take care of his safety. Wear tight protective clothing when mowing grass. Special goggles are used to protect your eyes from dust, grass and flying debris. Cover your hands with gloves.

Electric grass trimmer plugged in and battery models charged several hours before use. Fuel is poured into the gas mower.

The lawnmower is held so that the spool or blade is parallel to the ground. When the tool is in the correct position, start the engine. After cutting the grass, the lawnmower switches off.

First start

The operator assembles the mower before the first start, the procedure is described in the instructions supplied with the product.

If the grass trimmer is gasoline-powered, it must be checked before use. The fuel tank is filled to the neck.

The engine has to run on fuel, so at the first start it should run for a few minutes without any load. Then start mowing the grass.

How to fuel a gas grass trimmer

Gasoline-powered grass mowers come with two-stroke and four-stroke engines. The first option is much more common. What are the differences between the two:

  • Grass trimmers with a two-stroke engine respond faster to the power lever (for this reason, brushing machines are mostly equipped with this type of engine);
  • A tool with a two-stroke engine will be much easier and also easier to maintain;
  • The fuel consumption of a two-stroke engine is about 30% higher than that of a four-stroke engine with similar power;
  • The 4-stroke engine is more environmentally friendly because the fuel in it burns completely and is not emitted into the atmosphere, and its noise level is much lower;
  • And the most important distinction is refueling: a two-stroke engine has one common tank, in which gasoline mixed with oil is poured; a 4-stroke engine has a separate gas tank and an engine oil tank.

You must use fresh AI-92 or AI-95 gasoline and high-quality engine oil for gardening equipment (manufacturers make different types of oil for 2 and 4-stroke engines). You can use mineral, semi-synthetic or synthetic oil.

The ratio of gasoline to oil for two-stroke trimmers can be found in the instruction manual for the specific model. Normally it is 50: 1, in some cases a ratio of 25: 1 or 40: 1 is recommended. The fuel mixture should be prepared in a separate container with precise proportions. Never pour fluids “on sight” directly into the tank without first mixing them. Detailed instructions for mixing gasoil, with videos and descriptions, can be found on our website here.

READ How to Put a Spring on a Lawn Mower Starter

Works in

Lawn mowers must be started before you start working. The operator turns on the engine; this should stand for a while. Make sure that the engine does not overheat, there should be no load.

The load increases gradually as the mower works. If you start at high speed, the engine will run poorly, which will affect the further operation of the mower.

grass, trimmer

There is no need to fully develop a temporary resource at the first start-up. After the engine has idled, you can start working on the lawn. The lawn mower should not run for more than 15 minutes, after which the motor is turned off, it must cool down.

If you want to start the electric grass trimmer, first assemble the belt. Then perform a test run at least 3-5 times. If the engine is running normally, proceed to mowing. At first, they do not run for more than 5 minutes, then the duration of operation gradually increases.

How to wear a belt

If the tool is mounted on the shoulder, it hangs on the shoulder before use. Grass trimmer is attached to both shoulders if he has a backpack.

Model with bicycle handle can be held with both hands, D-handle wraps around the palm. The belt should be worn so that it is comfortable, then your back will not get tired.

How to mow a lawn to keep it straight

To cut the grass evenly, lower the mower as low as possible while working. The plot should be divided into squares. You need to work in a clockwise direction. In this case, the hay will always lie to the left, without interfering with your feet.

A scythe under the hay

Better to mow with a metal disc, not a fishing line. The grass is cut under the root, keeping it as long as possible.

Mow tall grass

If you need to mow tall grass, it is done in several passes. Treats the lawn 2-3 times. The rotating part is lowered from top to bottom, so the grass does not wind up on the spool.

The operator must remember that traumatized grass around the reel causes the engine to overheat. If this happens, the brushcutter is switched off and the bobbin is cleaned.

The most efficient way to cut the grass is with the tip of the line, not the full length of the line. In the second case, the tool works worse, engine overload is possible. If you need to cut the grass on a large area to increase efficiency, the grass trimmer should be tilted to mow.