Changing The Oil In The Lawn Mower

Makita Lawn Mower Oil Change

Why is it so important to observe the frequency?

First, let’s take a look at how to change the oil in a lawn mower from time to time. Firstly, this fluid provides air cooling of the mechanism, thereby allowing the engine to operate at maximum speed. Secondly, lawn mower oil protects its parts during winter storage.

Which lawn mower oil is worth choosing?

It is necessary to emphasize that a certain type of fluid and its viscosity directly depend on the temperature conditions in which this tool is operated. So, if the weather is warm (temperatures from plus 5 to plus 30 degrees Celsius), it is recommended to use the SAE-30 series fluid. In the off-season season, experts recommend pouring lawn mower oil with a viscosity of 10W-30. In winter, 5W-30 series fluid can be used. You should also pay attention to Synthetic 5W-30, which by its properties ensures reliable operation of lawn mower parts at relatively low temperatures.

A lawn mower is a must-have item for those who need repetitive mowing of grass on lawns and other soil areas. But with the purchase of this tool, one should not forget that it, like any other mechanism, asks for repeated maintenance. One of these moments is an oil change. How to change the oil in the lawn mower, which liquid is better to fill? You will learn the answer from the article.

Why is it so important to observe the frequency?

To begin with, let’s take a look at how important it is to periodically change the oil in your lawn mower. Firstly, this fluid provides air cooling of the mechanism, thereby allowing the engine to operate at extremely high revs. Secondly, lawn mower oil protects its parts during winter storage.

It should be noted that the frequency of oil changes directly depends on the technical condition of the engine. For example, if the engine on the mower is new, the fluid must be changed immediately after running in. In terms of time, this is approximately 5-6 hours of operation of the mechanism. So that in the future, various debris does not penetrate inside and does not accumulate in the engine, it is necessary to change the fluid several more times with a frequency of 5-10 hours.

If the engine is not new, the mower oil can be changed approximately every 25-50 hours of tool operation. This is an average of 2-3 months of work. Also, the condition of the oil can be determined without measuring the number of hours worked. Just make sure that it does not start to take on a black tint. When this happens, be sure to change the fluid, otherwise the engine may soon simply jam.

And now about how to change the oil in a lawn mower. The whole process can be divided into several stages:

• The old liquid is drained first.
• The mower then turns to the side (to the side where the drain hole is located) for a few minutes until the waste fluid is completely drained. Then the tool is put back in a horizontal position. In this case, it is necessary to prepare in advance a small container for old oil.
• After that, a new one is poured into the mower through the neck.

Everything, at this stage, the oil change can be considered complete. When you pour new fluid into the neck, remember that it must be poured strictly up to the indicated mark in the crankcase.

. CHANGING THE OIL IN A Husqvarna 4-Stroke Lawn Mower??

I have the 1st 500 subscribers! This is tied to this figure! It’s time to service the gasoline lawn.

If the motor is not new, the lawn mower oil can be changed approximately every 25-50 hours of tool operation. This is an average of 2-3 months of work. Also, the condition of the oil can be found without measuring the number of hours worked. Just make sure it doesn’t get dark in color. When this happens, be sure to change the fluid, otherwise the engine may just jam soon.

Changing the oil in a Husqvarna lawn mower

I have the first 500 subscribers! This is tied to this number! It’s time to service the gasoline lawn.

Why is it so important to observe the frequency?

First, let’s take a look at how to change the oil in a lawn mower from time to time. Firstly, this fluid provides air cooling of the mechanism, thereby allowing the engine to operate at maximum speed. Secondly, lawn mower oil protects its parts during winter storage.

Changing the oil in a Husqvarna lawn mower

I have the 1st 500 subscribers! This is tied to this figure! It’s time to service the gasoline lawn

Husqvarna Lawn Mower Oil Change

A lawn mower is a must-have item for those who need repetitive mowing of grass on lawns and other soil areas. But with the purchase of this tool, one should not forget that it, like any other mechanism, asks for repeated maintenance. One of these moments is an oil change. How to change the oil in the lawn mower, which liquid is better to fill? You will learn the answer from the article.

How often should the fluid be changed?

It should be noted that the frequency of oil changes directly depends on the technical condition of the engine. For example, if the engine on the mower is new, then the fluid must be changed immediately after running in. In terms of time, this is approximately 5-6 hours of operation of the mechanism. So that in the future, various debris does not penetrate inside and does not accumulate in the engine, you need to change the water a couple of times with a frequency of 5-10 hours.

Oil change

And now about how to change the oil in a lawn mower. The whole process can be divided into several steps:

• Ancient fluid joins first.
• Then the mower turns to the side (to the side where the drain hole is located) for a couple of minutes until the waste liquid drains one hundred percent. Then the tool is put back in a horizontal position. With all this, you need to prepare a small container for old oil in advance.
• Then a new one is poured into the mower through the neck.

Everything, at this step, the oil change can be considered complete. When you pour the newest fluid into the neck, remember that it must be poured strictly up to the indicated mark in the crankcase.

How to change the oil in a lawn mower

Whether in a car or on a lawn mower, oil is an essential ingredient in any engine. Large engines are usually designed with easy oil changes in mind, but oil changes in small engines, as you can see on lawn mowers, are not always so intuitive. If you’re not careful, trying to replace your lawnmower with oil can get a lot of confusion. You cannot just ignore this, as oil breakage can dramatically shorten the life of your lawn mower. Fortunately, changing your lawnmower oil as part of your regular lawnmower maintenance is easy if you know how.

Credit: Fertnig / Vetta / GettyImagesHow To Change The Oil In A Lawn Mower

Check the mower

After changing the oil in the mower, reconnect the spark plug wire and add gas to the mower if necessary. Refill the mower engine and start it. Let it run for a few minutes, making sure the engine runs smoothly. This will distribute the new oil throughout the engine, lubricating the moving parts.

Prepare the engine

Start the mower and let it run for at least a few minutes to warm up the oil to ensure an easy flow. Once the engine has been running long enough, turn it off and disconnect the spark plug wire to prevent the windrower from accidentally starting while you work on it.

Drain the oil

Support the mower with the candle pointing up and place a pallet under the mower. Locate the oil plug bolt protruding from the mower using a socket wrench to loosen it. Turn plug counterclockwise until oil begins to drain from the windrower engine into the drain pan. Wipe the area with clean paper towels after draining the oil.

If you cannot find the drain plug, you can also drain the oil by removing the dipstick and tilting the windrower until the oil drains from the dipstick tube. Make sure the oil filter is facing up so that oil does not drain into the carburetor.

Change filter

Open the oil filter holder and take out the old filter and discard it. Place the new filter in the holder, making sure it is correctly installed. After installing the new filter, close the holder to secure it. This is an important part of changing the lawnmower oil, as leaving the same filter in place will quickly contaminate the new oil.

Change your lawn mower oil

Tighten the oil plug by turning it clockwise and then carefully slide the drain pan to the side. Lower windrower back onto wheels. Remove the dipstick and add oil as recommended in the user manual, then replace the dipstick.

Tools and materials

You may need tool kit:

• Oil collecting container;
• Clean, dry rags, napkins or towels;
• Socket wrench with a corresponding socket;
• Empty plastic containers (household with lids);
• Machine oil;
• Set of wrenches;
• Trumpet;
• Pumping syringe;
• Siphon.

Removing old oil

Removing old grease is one of the most important steps in the process. There are three ways you can use to make sure you remove a lot of old oil.

• Use a siphon. Insert one end of the tube into the dipstick hole to measure the oil level until it reaches the bottom of the oil reservoir. Place the other end of the siphon in a structurally strong container that you will specifically use for this and future grease change. Finally, place blocks of wood or other sturdy material under the wheels of the mower on the opposite side of the pouring hole. It is easier to remove almost all the oil in a tilted lawnmower.

• Remove the oil plug. Depending on the type of petrol mower, you can remove the oil plug to drain old grease. Refer to your user manual for the location of your drain plug and make sure you have the correct size socket wrench for the job. Install a wrench on the plug and remove it. When the oil is completely drained, you can replace the plug.

• Use a special tool such as a syringe to pump out and fill the oil tank. This is very convenient when the opening of the tank is too narrow, and at the same time it is inconvenient or impossible to pour new oil from the bottle. The syringe can easily pass through the hole to pump out old waste oil.

• Tilt method. If you do not have access to the oil tank, you can drain it by tilting the mower to one side. When tilting the mower, place the filler cap on the container you are using to collect used oil. Once correctly positioned, remove the filler cap and allow the oil to drain completely. Using this method, you must know exactly what the fuel level is in the mower. It is also important to note where the air filter is located so as not to contaminate it with drain oil.

Preparation and setup

The location of the mower is important when preparing this machine for an oil change. Due to the potential for leakage, it is best not to do this on grass or near flower beds, as oil droplets can adversely affect plant life. Choose a hard, flat surface such as a driveway or sidewalk, and be sure to use plastic wrap to keep oil droplets and stains on this protective film.

It is a good rule to run the mower for one or two minutes before changing the lubricant to warm up the engine a little. After that, you will have much less trouble retrieving the old grease. It is also useful to take precautions when working with the mower after turning it on, as there will be an increased likelihood of burns on the engine, for example. Work gloves are recommended to reduce the risk of injury.

Finally, you can disconnect the spark plug wire from the spark plug itself and move it away to avoid accidentally starting the engine. And also you need to make sure that the pump (pump) is turned off. The last step in your preparation should also include cleaning the area around the oil fill hole., to prevent foreign particles or dirt from entering the oil reservoir.

How to change the oil in a lawn mower?

1. Preparation and setup
2. Tools and materials
3. Removing old oil
4. Filling the tank

Lawn maintenance starts with a well-maintained lawn mower, which means there are certain tasks that must be performed constantly to keep the machine in top working condition. One of the most important aspects of owning a lawn mower is knowing how to change the oil.

Filling the tank

Now that the old oil has been removed, it’s time to fill the reservoir with fresh grease. Refer to your lawn mower user manual again to find out which type of oil is right for your machine and how much to fill.

Fill the oil tank. Let the oil sit for at least two minutes, then check the level with the dipstick to make sure it is filled correctly.

After the oil reservoir is filled to the proper level, you will need to reattach the spark plug wire. Do not start the mower immediately, let the machine stand for a few minutes before starting work.

See below for how to change the oil in a 4-stroke lawnmower.

4-Stroke Lawnmower Oils

1. Why do you need lubricant?
2. Features of the four-stroke engine
3. Selection recommendations
4. How often do you need to change the lubricant?
5. Oil change
6. What oil should not be poured?

Lawn mowers have long taken their place among the necessary equipment for owners of country and private houses, as well as employees of park facilities. In the summer, this technique is used quite intensively. For the reliable and durable operation of lawn mower engines, the quality of fuels and lubricants, in particular oils, is of great importance. Oils for 4-stroke engines of this type of garden machines are described in this article.

Oil change

Changing the lubricant in a lawn mower engine is not as difficult as changing the oil in a car. Everything is much simpler here. The work algorithm is as follows.

1. Prepare enough fresh oil for replacement. Typically, many lawn mowers are filled with no more than 0.6 liters of oil.
2. Start the unit and let it idle for a few minutes to warm up the oil so that it becomes more liquid. This promotes better drainage.
3. Switch off the engine and place an empty container under the drain hole from the crankcase to collect the used oil.
4. Unscrew the drain plug and let all the oil drain. It is recommended to tilt the device (if possible or appropriate) towards the drain.
5. Screw the plug back into place and move the machine to a level surface.
6. Open the filler hole on the oil tank and fill it to the required level, which is controlled by a dipstick.
7. Tighten the tank cap.

Why do you need lubricant?

Gasoline lawn mower engines are internal combustion engines (ICEs), in which the driving force transmitted from the ICE to the working bodies (cutting blades) is generated by the energy generated in the combustion chamber of the cylinder when the fuel mixture ignites. As a result of the fire, the gases expand, forcing the piston to move, which is associated with the mechanism for further transfer of energy to the final organ, that is, in this case, the lawn mower knives.

In the engine, therefore, many large and small parts are mated, which need lubrication in order to, if not completely prevent their abrasion, destruction, wear, then at least as much as possible slow down these processes negative for the mechanism.

But over time this cannot be avoided, since the development of gaps in the mates still occurs. And the better the oil, the longer the service life of the garden equipment will be. In addition, with the help of high-quality lubricants, the following positive phenomena occur:

• Better cooling of the engine and its parts, which prevents overheating and thermal shock;
• Engine operation is guaranteed at high loads and with a long time period of continuous grass mowing;
• The safety of internal engine parts from corrosion is ensured during seasonal equipment downtime.

Selection recommendations

It is best to use a specially designed oil for 4-stroke lawn mower engines in accordance with the ambient temperatures in which the equipment will be used. For example, are quite suitable for four-stroke mowers in terms of their operational parameters specialized grease grades 10W40 and SAE30, that can be used at ambient temperatures ranging from 5 to 45 degrees Celsius.

In the absence of specialized oils, you can use other classes of oils used for cars. These can be grades SAE 15W40 and SAE 20W50, which are also used at positive temperatures., but only their threshold is 10 degrees lower than specialized ones (up to 35 degrees). And also for 90% of the available models of four-stroke lawn mowers, an oil of SF composition will do.

The container with engine oil for a four-stroke lawn mower must be marked with a “4T” sign. Synthetic, semi-synthetic and mineral oils can be used. But most often they use semi-synthetic or mineral oil, since synthetic oil is very expensive.

And in order not to guess what oil to fill in the engine of your mower model, it is better to look at the instructions. It indicates both the required type of oil and the frequency of its replacement. It is recommended to use only the types of oils specified by the manufacturer until the expiration of the warranty repairs in order to maintain the issued warranties. And then to pick up something more affordable, but, of course, not inferior in quality to branded oils. You should not save on oil quality.

Features of the four-stroke engine

Lawn mower gasoline engines are divided into two groups: two-stroke and four-stroke. Their difference in the way of filling the oil is as follows:

• A lubricant for two-stroke engines must be pre-mixed with gasoline in a separate container and in a certain ratio, thoroughly mixed, and after all this, it must be poured into the fuel tank of the car;
• Lubricant and gasoline for four-stroke are not pre-mixed. These fluids are poured into separate tanks and work separately, each according to its own system.

Based on this circumstance, the requirement for oil is also special here. It should retain its properties for a long period, when, as for the lubricating composition of a two-stroke engine, the main quality criterion, in addition to the basic properties, is the ability to burn without a trace, without leaving carbon deposits and deposits.

How often do you need to change the lubricant?

As noted above, the operating instructions for garden equipment with a 4-stroke engine must indicate the frequency of oil changes. But if there are no instructions, then they are guided first of all by the number of hours that the equipment has worked (engine hours). Every 50-60 worked hours, you need to change the oil in the engine.

However, in the case when the plot is small and you can process it in no more than one hour, then it is unlikely that for the entire spring-summer season, the lawn mower will work even half the operating hours of the norm, unless it is rented out to neighbors. Then the oil must be changed when the equipment is preserved in the fall before the winter period.