Choosing a jack of a hammer for concrete. The device of the chipping hammer and the principle of operation

TOP-20 of the best jack hammers-2022 rating in quality

The main criterion for choosing a chipping hammer is the scope and purpose. All other parameters are selected based on the circle of works for which they make the purchase.

In the top of the best tools 2022. Increased products that received specialists and ordinary buyers. 20 models of leading brands are certified according to the standards of world, European and quality.

Rating of the best jack hammers

Vocality location
The best jack hammers in price/quality for 2022
one Makita HM1307C Find out the price four.9 /5
2 Bosch GSH 16-30 Professional Find out the price four.8 /5
3 Metabo Mhev 5 BL Find out the price four.7 /5
Best electrical jack hammers
one Makita HM1213C Find out the price four.9 /5
2 Bosch GSH 11 E Professional Find out the price four.8 /5
3 DWT H13-05 B BMC Find out the price four.7 /5
Best pneumatic jack hammers
one Caliber OMP-815 Find out the price four.9 /5
2 Jonnesway Jah-303HK Find out the price four.8 /5
3 Fubag HRC 4500 Find out the price four.7 /5
The best jack hammers with impact frequency adjustment
one Zam ZMM-25-1500 EVK Find out the price four.9 /5
2 Patriot DB 550 Find out the price four.8 /5
3 Makita HM0870C Find out the price four.7 /5
The best jack hammers with an additional handle
one Zam ZMM-25-1500 VK Find out the price four.9 /5
2 Stanley Sthm10k Find out the price four.8 /5
3 Patriot DB 560 Find out the price four.7 /5
The best powerful professional jack hammers
one Makita HM 1812 Find out the price four.9 /5
2 Edon DH-GL95A Find out the price four.8 /5
3 Electrolite OM 65 2200 Find out the price four.7 /5
Best Budget Jacks
one Caliber PNZ-19/800 Find out the price four.9 /5
2 Eureka ER-83501K Find out the price four.8 /5

The market offers production of production (professional) and domestic purposes. Depending on this, the technical characteristics differ.

By the type of energy, the chips are:

JSC Hydraulic Breaker Technology

These are the most common types of equipment. The former operate from a network with a voltage of 220-380 in. Where the use of electrical engineering is contraindicated, use hammers operating under air or liquid pressure (pneumatic). The latter are designed to perform operations of increased complexity in the open air.

The main parameters that pay attention to when choosing:

Energy consumption capacity affects work performance. In compressor chips, this value is absent. Power energy in pneumatics is provided by pressure (bar).

These three indicators (power, impact energy, the number of impulses behind.time) interconnected and characterize generally the effectiveness and purpose of the tool. The weight and dimensions of pneumorudium are less electric, since there is no engine and gearbox in the design. They are replaced by a piston. But their work requires a compressor.

Light (up to 5 kg), medium (from 5 to 10 kg) and heavy (from 10 kg) electrical chips are distinguished by the form factor. Performance parameters also depend on mass and dimensions. The convenience of operation is influenced by the equipment of the jackhammer with nozzles to perform various operations. These include: blades, scraps, chisels, chisels, tampers and others.

Cartridges are used to install and clamp them. The most common are two types: SDS-MAX and hexagonal HEX. Both options provide fast and strong fixation. Masters also pay attention to the quality of isolation and cable length. Not only productivity depends on this, but also safety. The chipsters entering the top are equipped with well-insulated cords of 5-6 meters long.

Electric junk hammer works from a standard network of 220 volts. Its main advantage in the absence of additional elements in the system. You just include the tool in the outlet and you can use. True, there are shortcomings regarding power restrictions. Pneumatic hammers are more powerful and economical, but due to a certain complexity in work, they are more often used in industries or large construction sites. In domestic conditions, an electric hammer is the best option.

If you are not a professional builder, but there is a need for dismantling, this model is of interest. For a fairly affordable price, you can purchase a jack of a hammer with a good impact power of 49 j. The electric tool consumes 2 kW/hour, unpretentious and quite reliable.

Reviews of owners using the chipper for more than one year confirm its reliability and high performance. With its help, a wide variety of tasks are solved, such as: breaking old buildings and foundations; preparation for the seizure of rocky soil; removal of a frozen soil layer; crushing rocks, sandstone and many others. For ease of use, an additional handle is provided. In the intervals between operation, for storing the tool there is a special case.

Caliber master OM-1700M

It is believed that an electric hammer, even if it is Bosch or Makita, cannot be more powerful than pneumatic by definition, but this example completely refutes this statement. Before us is a really powerful tool with a blow to 65 joules. This is a lot, and even pneumatic jack hammers can not always boast of such indicators. Power consumption is only 1.7 kilowatts, which is the norm.

True, it should be understood that such a force could not but affect the size and weight of the tool. A hammer weighs more than 25 kilograms, and working with it, especially given the strong vibration of the electric motor, will be very difficult. But he will easily demolish even the thickest concrete partition. There are also disadvantages regarding the noise level, which is also quite natural, given the design of the tool. It works very loudly, as, indeed, any jack of a hammer, no matter electric or pneumatic.

Pneumatic chipper in reliability and convenience is not inferior to network models, and in terms of performance and power they even surpass. Due to the fact that they need an air compressor for their use, such tools are not often taken for domestic use, they are more popular at construction sites, in production conditions. In addition to an impressive operational resource, this type of unit is safer to use in very dusty rooms, as well as in places with increased fire hazard.

Our rating contains five best pneumatic hammers, which are suitable for both garden and garage construction and harsh conditions of multi-storey building. All models belong only to reliable trademarks that will provide owners with good service centers and spare parts for regular service.

Metabo DMH 30 SET

For professional tasks for interior decoration and repair of premises, this model is suitable in all respects. Ergonomic structure and low weight contribute to prolonged, voluminous work. The main purpose of the instrument is to remove the old tiles, plaster, masonry and other types of work, where great performance is required. A pneumatic hammer is equipped with everything necessary. a case for storage and carrying, a set of equipment of four chisels of various shapes, additional fittings, this can be significantly saved on the purchase. In addition, as users note everything that is included in the kit, as well as the tool itself is characterized by high quality manufacturing and a large resource. Reviews about this pneumatic young woman are only positive, this allows us to say with confidence that he does not have objective shortcomings.

Wester VM-10

An indispensable assistant for car services and finishing craftsmen, a beam chipper with a pneumatic drive can easily solve problems that are excessive to other types of tools. A special equipment of a hammer consisting of a bunker of hardened, steel needles quickly beats off old paintwork, rust, plaster and other materials or pollution from any surfaces. In this case, the design of the tool allows you to work not only with even planes, but also with details with complex geometry. The processing speed and the ability to use in limited space make it an undeniable leader among analogues in technical characteristics. By reliability, the hammer is also not inferior to competitors. all parts and internal nodes are made of good metal, which positively affects the service life of the apparatus.

  • a large selection of equipment for different works;
  • high performance;
  • small consumption of compressed air;
  • the ability to use in limited space.

Caliber PNZ-19/800 Prof

Light pneumatic hammer from the lower price category is convenient in operation and has practically no return. Thanks to this, you can use it in cases where it is done with one hand. The small impact force is compensated by a high frequency. 4500 beats/min, as a result the chipper is great for delicate work. Housing, handle made of metal and perfectly remove heat, increasing the service life. The configuration has everything you need to start work immediately after the purchase. According to owners, the price ratio is the quality of the hammer at a high level, which led its top-best. But its modest characteristics significantly narrow the scope of application.

choosing, jack, hammer, concrete

Fubag HRS 4500 (100120)

The well.known manufacturer of the pneumatic tool, the FUBAG brand is famous for the quality of the manufactured equipment. The HRS 4500 model designed for professional use was no exception. A good pneumatic junk hammer is able to cut studs and nuts, remove tiles, old plaster and even make strokes in concrete walls. Of the features, it is worth noting a very small weight. without equipment, it does not exceed one kg, a convenient shape of the handle and the ability to adjust the air supply. The tool does not have significant disadvantages, but, as users note, the hammer needs a productive compressor and there is not enough anti.slip handle of the handle.

Caliber OMP-815

The industrial chipper of the Caliber brand belongs to the category of heavy pneumatic equipment capable of carrying significant loads in the conditions of construction sites. A powerful hammer gives out 43 J and can break any concrete, open the road surface, destroy stones and brick partitions. Air consumption is only 1560 l/min. The modern design favorably distinguishes its lack of vibrations, a small for its class weighing 11 kg. and the reliability of all mechanisms. There is also a good balanced tool that reduces the load on the operator. Given the working characteristics of the OMP-815 chipper and positive reviews, it can be called the best pneumatic hammer for professional work.

Which jack is better to buy

Often, when buying a new unit, doubts arise which is better to purchase. a pneumatic or electric jack of a hammer. There is no single recommendation, it all depends on the volume of work and the possibility of using compressor equipment.

The right choice of jack of a hammer for work or one.time repair is the choice of a suitable combination of technical parameters. Light models are suitable for small work, powerful and productive. for capital construction or repair. It is important to remember that the technique of this class does not have a clear division into household and professional class. The chips are chosen exclusively according to the parameters depending on the upcoming work.

Hammer Instructions

The whole difficulty of work lies in the fact that the negative load goes to a person. The main features of use are strong vibration, an increase in the amount of dust in the epicenter of work, an increased noise level, which is very dangerous to health, the smallest metal and stone details that fly out at high speed.

It is for these reasons that the work should be familiarized with the full safety instructions that lies in every set when buying a jack of hammer. By the way, the photo of the jack of the chipping hammer can be viewed in the article.

Another rule when working with such a tool is the right clothing that closes all the open parts of the body, a mask or special glasses on the eyes, as well as dense leather shoes.

Bosch GSH 5 E

For several years, our young brigade suffered without a junk hammer. From the situation came out of the rental of a percussion instrument, but, it should be said that the cost of such a service cannot be called humane, especially when you consider that the volumes of dismantling were constantly increased. By the time of insight, we already knew exactly what we needed. The main work that we performed with a jackhammer was associated with the redevelopment of apartments. to break the brickwork, make an opening in the wall. Even in new buildings there is where to walk around. You have to make large strokes for communications a little less often, choose niches under an electric shield or safe, chop old screeds, knock down the plaster. Over time, we took up the construction of cottages, then the front of the work expanded-somewhere the opening of the stairs in the stove is pierced, somewhere to tear the foundation, to make holes in the ceilings somewhere It was obvious that we did not need a heavy and even medium chipper-in all of all cases were enough of the power of light models. So, in 2006, our arsenal was replenished with heavy artillery from Bosch’s favorite company, although not so heavy.

The GSH 5 e chipper immediately struck with its shock force, which reached 12 J at a possible frequency of 3000./min., what was at that time an unattainable indicator for this class. During operation, such a tool involuntarily arises a feeling of his own greatness, so easily he copes with the destruction of concrete and other materials. It turns out that from hard work you can enjoy! Of course, such power is not always needed, especially if you do not want the walls in a neighboring apartment to collapse. Here, by the way, the frequency of the frequency of the shock in the form of a characteristic wheel on the case is in handy.

The gearbox does not overheat, its metal case allows heat well, pauses for cooling the tool are not needed at all. The 1100-watt motor easily copes with its tasks.

After the unit is included in the network and the setting of the launch, its heart comes to life smoothly (there is no overload on the network), but until you give a peak load, there will be no stroke. The waiting function is confirmed by the light indicator. The start button itself is fixed, so there is no need to strain fingers during continuous operation.

As soon as the equipment rests on a solid material, the chipper begins to work a little differently, this is triggered by constant electronics, which does not allow engine speeds. The condition of the tool helps to monitor the service display.

Bosch GSH 5 E jack hammer is very convenient for working in a horizontal plane, on outstretched arms and even above the head, its weight is only 5.5 kg, and dimensions (480×235 mm) generally put this unit in a par with many barrels of peorators. The kit includes a very convenient bracket additional handle. It is curved at an angle, which allows not only to deploy it by 360 °, but also to narrow or expand the grip. Start key is large, it is well felt even in rude mittens. All switches work clearly and easy.

The level was a system of protection against vibration. one of the best, among those that happened to test. I can imagine how effective it is in 2012 models (Vibration Control).

The power cord is quite long, so the extension cable never interferes under the feet. It is quite elastic, but well isolated. Another pleasant “Boshevskoye” know-how is a hinge connection of a cable with a chipper body. The mobile sphere prevents the break of the cord, especially a useful function for clamped places.

A flat peak-lobation can be turned into one of the 12 positions and make an accurate convenient deterrence in a limited space. Bosch developers called this Vario-Lock system, which is successfully used on all their peorators and chipsters. The cartridge was used by SDS-MAX, here, in fact, without surprises, because a large equipment is needed to transmit such shock energy.

A high.quality capacious case is included in the hammer.

Bosch GSH 5 E jackhand has been serving for six years for six years. About 700 spent it at one time, but did not regret it for any center of this amount, everything more than paid off. And this hammer is not going to rest, the same amount will probably work out. This model, of course, has already been discontinued from production, but we are not going to invent anything when the time comes. take GSH 5 CE, or what else will offer Bosch in the region of five kilograms.

How the electrical chips can differ

The electric chipper is not cheap, so you need to approach its choice very carefully. Usually, considering the criteria for choosing a particular electrical tool, we start a conversation with whether we need a professional or household model. For a jack of an amateur class, as it were. But it should be noted that almost all manufacturers of an electric tool offer chipsters designed for various tasks.

Three groups of this tool can be distinguished. Light chipping hammers (weight up to 5 kilograms) are relatively universal, they are compact and easy, it is convenient to work in a horizontal plane. To solve supercomplicated problems, you should pay attention to the average (5-10 kg) and heavy (“concrete“. up to 30 kg) chips. They are narrowly specialized, it is difficult for them to work in a horizontal position. Such a tool is intended for soil and foundation operations, road works in the “vertically down” position. Accordingly, there is a classification on vertical and horizontal hammers. Separation by weight is quite justified, since this indicator, as a rule, indicates the power of the tool, the massiveness of parts. For example, Bosch enters the weight parameter into the marking of the product (GSH 5 CE, USH 27. 5 and 27 kg, respectively), respectively).

Bosch 5 CE Professional

The engine power (from 500 to 2000 watts) is certainly one of the main indicators, the higher it is. the more productive the jackhammer will be, the greater the power of the blow and its frequency can be obtained at the output. High power allows a longer time to constantly operate the tool, use a larger equipment. However, this circumstance is almost not related to the products of Chinese brands. Manufacturers from the Middle Kingdom usually install the most powerful motors on their tool, but for certain reasons, they cannot get dividends from excess watts.

The most important characteristic of an electric jack of a hammer is the maximum force of a single blow, which is calculated in Joules. The greater the impact force, the more opportunities a specific model provides, the material of greater strength can be destroyed. This indicator for light chipsters can be at a mark of 3-8 J, while for powerful concretes it can be more than 60 J (Bosch GSH 27 VC, Makita HM 1810). In some cases, a small impact force is compensated by the high frequency of the back-to-stand movement of the box, for example, Bosch GSH 5 CE (8.3 J) performs 2900 beats per minute, and Makita HM 1810 (63 J)-1100 beats./min. So, the power of impact and the number of strikes per unit of time are the main performance indicators, but a lot of their correct ratio decides much.

An electric jack hammer is an expensive high.tech tool that should have a number of electronic systems that ensure its reliability and functionality. One of them is the adjustment of the frequency of shock. It can be produced either by a button (according to the degree of pressing) or a regulator if there is a fixation of the start. By the way, the launch button lock is a very important detail, which allows you to release the trigger during long.term continuous operation. Launch in the form of a slider does not require fixation in principle.

Some models have a mechanism that turns off the function of the impact at idle. the so.called “waiting mode”. This increases the resource of the shock node.

When a powerful chipper is turned on, the restriction of starting currents is triggered so that there is no jump in energy consumption (Dewalt D25899K).

DEWALT D25899K

Most manufacturers compon their tool with control devices (displays, indicators), signaling the need for the service or about the wear of the brushes. If the brushes are not replaced on time, they can turn off themselves so that an expensive engine is not damaged. The condition of the cord and fork can also be controlled.

Separately, it is worth saying about antivibration systems. The problem of fighting noise and vibration is solved in different ways. First of all, this is a system of built.in dynamic counterweight. it is already possible to reduce vibration by 50–70% with its help. To this, handles with a spring suspension and damping inserts are added, rubberized and foamed overlays. For example, Hilti has proposed an active absorption of vibration (AVR)-TE 1000-AVR models or, for example, TE 3000-AVR (68 J).

Do not be surprised that some models of jack hammers have a metal gear casing, and some of the plastic. This is done to reduce the weight of a horizontal tool. This should not cause concern, since the material is not only light, but also very durable, wear.resistant. As an example, we give the “baby” HK 0500 from Makita. Powerful devices proudly shine with metal parts made of aluminum, magnesium alloys.

The type of cartridge for fixing the shank may differ. Superflowing models of some manufacturers can work with SDS-Plus equipment, the bulk of the chipboard is equipped with SDS-MAX cartridges (up to 26 mm in diameter), super-powerful models are designed for peaks with a hexagonal shank and up to 30 mm diameter (Hitachi H65SB2).

Hitachi H65SB2

Sometimes you have to work in a wide variety of positions, so it is often very useful to be able to choose and fix a certain position of equipment. As a rule, 12 provisions are available. every 30 °.

When choosing a hammer, you need to pay attention to the ergonomics of the product. An additional role is played by an additional pen, which can be either straight and D-shaped. In any case, it should have a large number of installation provisions, be convenient for a particular operator.

Types of jack hammers

The construction area is not the complexity of the rules: the more powerful the tool is, the faster the work is carried out. However, if we consider the jack of a hammer, its choice is based not only on the indicator of the mass of the device and the impact power, but also the features of the mechanics and the energy source. By weight, the tool is divided into three categories.

  • Light, with a mass of 5-6 kg. Such a tool is recommended to be used where freedom of action is needed (in constrained conditions, when working at an angle, at points of convergence of walls and so on). A light jacket hammer is used when working at a height.
  • The middle class tool (5-10 kg) shows the greatest effectiveness when working in a vertical, horizontal direction.
  • A heavy junk hammer (up to 30 kg) is perfectly used when working with soil, foundations.

Regardless of the class, the tool is equipped with a standard peak set. The nozzle may have different sizes. The set includes a peak-lomic for loosening or breaking, a shoulder blade for the operations of a preparation and alignment of the edge, a chisel for stroke or cutting of the material. Depending on the conditions existing on the construction site, you can choose the type of tool that will show the largest level of convenience and safety.

Electric

Electro Jumping hammer shows the best results in finishing work, when removing old coatings. However, this tool also has disadvantages:

  • cannot be used in rooms with a high level of fire and explosion due to sparking of the contact brushes of the rotor;
  • can fail or show violations of the engine at high humidity.

The electric tool always depends on the energy source. Therefore, choosing a jack of this class for construction work in buildings without a 220 or 380V network does not make sense.

The battery electric chopper is useful where there is no power supply network. However, devices of this class cannot show an acceptable operating time, characterized by reduced impact energy indicators. In addition, the power battery significantly increases the mass of the tool. The use of a battery.off hammer is rationally only for one.time, emergency work.

Petrol

  • It has a slightly larger mass in comparison with the electric;
  • not tied to the points of energy distribution, completely autonomous;
  • can show a significant level of impact energy, especially using gearboxes.

However, gasoline devices have a fairly significant list of disadvantages.

  • Garm, toxic gases do not allow to work in closed rooms.
  • There is a danger of spill and fuel fire.
  • Significant noise level.

It is convenient to work with a gasoline chipper outdoors. Such a tool is a good and economical choice, if you need to remove asphalt, punch sleepers, make landings for a pile foundation.

Pneumatic

A pneumatic hammer, depending on power, can be of two types:

  • with the transmission of the impulse by expanding the air inside the piston chamber;
  • working on a volumetric expansion, supplying air to a membrane chamber with a rod.

Regardless of the principle of action, the pneumatic tool has a key line: additional equipment is required for its operation. Minimum set. air compressor. It can be supplemented by elements of strapping, which increase the time of continuous work and give other advantages. The compressor tool has the following advantages:

  • has the smallest mass in comparison with other varieties of jack hammers;
  • The compressor tool is absolutely fire and explosion;
  • In some cases, you can significantly save money if you use a home.made receiver and other compressor strapping elements;
  • The noise during work is minimally achievable, since the supercharger, in most cases, is in the distance.

The main drawback of the pneumo of the tool is the need for a compressor, an energy source for it. However, with large.scale use of jack hammers of this type, this minus is leveled with amenities. By organizing air centrals, to which several units of the tool join, it is easy to organize a comfortable work of the operators group with one installation with one installation.

On a note! Hydraulic jack of a hammer has similar features. However, in such a device, the disadvantage is the working body (usually oil) due to the possibility of leaks, due to impaired sealing or damage to the hose. And this serves as an additional source of fire hazard.

Hammer selection criteria

High energy and a fairly large mass of individual devices force to pay attention not only to purely technical characteristics of jack hammers. They are evaluated on such non.obvious factors as ergonomics and layout.

The energy of the blow

As mentioned above, chipping hammers are not recommended to destroy reinforced concrete or cement monoliths with low ms in solution. Conducting such work will lead not only to low productivity, but will also cause high wear, and, therefore, the need for a waste of repair.

You need to choose the optimal model according to the recommendations of the manufacturer. If you need to get a guaranteed result, it is recommended to explore thematic forums or ask for advice of experienced builders.

Mass.sorting indicators

Evaluate the weight of the chipping hammer and the size of the device is a purely individual process. The tool is selected on the basis of habits, mode of operation (activity time. rest), ordinary indicators of free space for manipulations. However, attention should be paid to the weight of the apparatus. The closer the center of gravity is to the leading hand, the less fatigue accumulates with the necessary movements of the tool.

Materials

All materials in the design of the device should have as much strength and reliability as possible. For the elements of the gearbox, the use of plastic is not allowed. But some manufacturers do not know about it. Therefore, each product before buying should be examined as carefully as possible so as not to encounter a breakdown literally for the first hour. The main thing is that you should not save on a tool of reliable brands.

Ergonomics

The constructive solution of the chipping hammer should ensure the zero deviation of the axis of the tool when impact and it is as hard as possible in the hand.

  • The handle of the hammer should have a direct segment at the place of grip.
  • The grip zone should be located on the axis of the impulse pulse application.
  • If the tool has two handles (heavy, concrete). they should be located on the same line, perpendicular to the axis of the impact, with the grip of the hands at an equal distance from the center.

Any hilt has a start button. The location of this element should be such that the grip is not weakened for pressing or switching. The same applies to any adjustment organs. None of them should cause the need to switch attention or changes in the mechanics of the management of the tool.

Types of peak for jackdots

It is important not only to choose a chipping hammer suitable for your tasks, but also a peak. They have tips of various shapes, can have different lengths, mass, be made of various materials. If very short, then:

To work with the hard and hard materials themselves, peaks with conical tips are used. There is a smaller area of ​​contact with the surface, the higher the impact force.

Peak with a shoulder.shaped tip is suitable for working with soft and supple materials.

PIKA-SUBIL is used for reinforced concrete, as it can scare the reinforcement. Are both flat and in the form of a semicircle to create grooves.

The peaks of various brands of instrumental steel of various hardness are made. You need to understand that too soft or too hard peak is equally bad. The thing is that if the peak is stronger than the drummer, then the second will come out of the system. Simply put, the detail made of the least solid steel will break in a jack of a hammer. And on the basis of this, you may be refused to guarantee and replace the broken parts.

You need to understand that the peak is consumable, sooner or later it will fail. Therefore, on the one hand, soft ones are poorly suitable. they are short.lived, but you also do not need to chase over excessive hardness. Specific recommendations should be watched in the instructions for operation and this moment is quite important. Of course, if you take a solid peak, this does not mean that your junk hammer (drummer or its other part) will certainly break, but it’s better not to take risks.

On this we finish our article, where we analyzed in detail all the nuances of choosing a chipping hammer. Yes, the topic itself is much wider, there are certain points related to the operation of this tool, work with various materials, but all this can be found in the operating instructions, or in specialized forums. And for those who prefer to make a choice based on the opinions of real buyers and reviews, we have made a rating of the best jack hammers from leading manufacturers of power tools.

How Rock Breaker Works.

Makita HK0500

Makita HK0500 is the cheapest and lightest junk hammer in our ranking. Therefore, it is immediately worth noting that it is intended for a very limited circle of work: removal of plaster, tiles, construction solutions. It is not suitable for the destruction of brick walls and even more concrete structures. Its main characteristics:

Makita HK0500 has electronic adjustment of the number of revolutions, and equipment can be installed in 12 different positions, which allows you to work in hard.to.reach places. This is a very easy jacket hammer that is comfortable to work. The configuration includes a case and a wide peak. The cartridge is protected from dust, and coal brushes are disconnected with full wear.

Customer reviews are generally positive, they praise the build quality, reliability, price ratio and quality. Some are unhappy with it with the power and power of the blow, but you need to think about this before buying and look at the parameters, choosing optimal for their tasks. Makita HK0500 is a highly specialized model that appeared on the market for a long time, but, nevertheless, in this class it is one of the best.

Makita HM-0870C

Makita HM-0870C is already a heavier and productive junk hammer, the impact force of which is 11.4 J, respectively, it can solve more serious problems. And a set of additional functions is more wide. over, this is still a light and compact model that can be used even in limited spaces. Can be used for most repair work, to remove old coatings, plaster. The destruction of brickwork or concrete structures is permissible. Main parameters:

It has electronic adjustment of the number of revolutions, as well as double isolation, which provides additional protection. There is a stabilization system, smooth start, the cartridge allows you to easily and quickly change the nozzles without using additional tools. There are also light indicators that signal the wear of coal brushes and cable malfunctions. Supplies with a case, an additional side handle and grease.

Reviews about Makita HM-0870C are positive, many consider it the best option in this class of jack hammers. We also note that many bought it for professional activities, that is, they used it often and intensively. Therefore, it is worth noting its reliability: some have been working with him for several years and have not noted any problems. Note its power with performance for such lightweight. Makita HM-0870C is a universal and inexpensive jack hammer, which can already be attributed to professional tools.

TOP-3 best budget jack hammers

If the budget for the purchase of a chipping hammer is limited, you should pay attention to inexpensive models. They are in the lineups of many well.known brands, but the affordable cost does not affect quality, so such tools will successfully cope with almost any dismantling work.

Mighty Seven SC-0617C

One of the highest quality and inexpensive jack hammers, which is suitable for household and professional use.

The tool is provided with the case and a set of nozzles. Such extended equipment allows the use of a jackhammer for a wide spectra work, starting from dismantling and ending with the assembly of various structures.

For the convenience of operation, the manufacturer supplied the tool with an ergonomic handle with rubberized pads for the most comfortable grip.

The jackhammer is equipped with a hexagonal cartridge, so to replace the equipment will have to use additional tools, but the peaks are also provided with the keys to replace the peak, so you will not have to buy additional accessories.

Also, the tool boasts reduced weight, while it does not affect the performance, but prevents overwork during prolonged work.

choosing, jack, hammer, concrete

Specifications:

  • democratic value;
  • expanded equipment;
  • Suitable for working with materials of different hardness;
  • comfortable ergonomic handle;
  • high.power engine.

Onnesway Jah-683h

This jamming hammer, despite the democratic cost, has increased strength and energy of the blow.

Due to this, it can be used to perform a wide Spectra dismantling, and a rich selection of nozzles allows you to use the tool not only for crushing asphalt and frozen soil, but also to destroy concrete, brick and stone walls.

The handle has an ergonomic shape and is equipped with a rubberized lining for a convenient grip.

At the same time, the anti.vibrational system in the chipping hammer is not provided, so it is better to use the tool in special gloves that extinguish vibration.

The model is equipped with a hexagonal cartridge, so to replace the equipment will have to use a special key, which is also provided in the kit. The tool case is made of durable and high.quality plastic, which does not heat up even with prolonged and continuous use.

Specifications:

  • democratic cost with high assembly quality;
  • ergonomic handle;
  • Light weight facilitates operation;
  • Suitable for work even with the hardest materials;
  • All necessary accessories in the kit.

Stanley Sthm5ks

This electric jack of a hammer, despite the democratic cost, has a well.thought.out design and expanded functionality for domestic and professional use.

Thanks to the engine of increased power and increased impact force, with the help of the tool you can break rocks, brick and concrete buildings, destroy asphalt and loosen even frozen soil. The model is equipped with a reliable cartridge, which reliably fixes the peak, and the change of equipment will not take much time.

For a convenient grip on the ergonomic handle, rubberized pads are provided. They perform another function: they extinguish vibration so that the user does not feel overwork even with prolonged work.

Also, the jackhammer is equipped with an additional side handle for a more convenient grip and dismantling in hard.to.reach places.

Specifications:

  • The rubberized overlay on the handle perfectly extinguishes vibration;
  • There is an additional handle;
  • allows you to work even with very solid materials;
  • qualitatively assembled case;
  • Simple replacement of equipment.

Which company to choose?

When choosing a jack of a hammer, you should focus not only on its technical characteristics, but also on the manufacturer of the device.

Since this tool refers to professional, preference should be given to products of reliable and proven brands.

In 2022, professional builders praised the chipped hammers of the brands Stavr, Bosch, TZK, Makita, Patriot, Metabo, Fubag, Stanley, Caliber and Onnesway.