Circular Saw With The Possibility Of Stationary Installation

Overview of hand-held circular saws with the option of stationary installation
The stationary hand-held circular saw combines mobility and productivity. To set up the saw as a machine, you need legs and clamps.

Additional accessories

A laser pointer is a convenient option that allows you to cut a part with markings covered with sawdust. Increases the cost of equipment, but is welcomed by professionals.

Disc replacement. Modern models are equipped with a spindle lock that allows you to quickly and easily remove the disc for replacement. Otherwise, the disk is removed with two keys. A long and inconvenient procedure.

Overview of hand-held circular saws with the option of stationary installation

A hand-held circular saw is a must-have in the arsenal of everyone involved in construction or carpentry. The most convenient models are those that are installed on a workbench or table and are used stationary.

The first circular saws were developed by SKIL in the 20s of the last century. Since then, the appearance of the instrument has undergone significant changes. Manufacturers are constantly working on improving the design, which to this day withstands fierce competition. What are the structural differences of the tool with a stationary mount and what models are on the market, read on.

READ  Oil To Saw Stihl Proportions

Saw assembly

Each manufacturer offers many options for completing their products. The most important additions are:

  • Stopper. Used to remove even edges of the material, turn an unedged board into an edged board, sawing off long strips of material from a piece;
  • Ruler. Bolted to the platform and helps measure the width of the piece to be cut.

Power Tool Care Tips

Don’t forget that you have to deal with a dangerous tool. Because of this, you need to be very vigilant and careful. Only in this case you can not only do a good job, but also protect yourself and the health of your family.

It is necessary to work with a circular saw only in protective clothing, gloves and glasses.

Before plugging in the saw, make sure it is turned off.

If you need to turn the saw on or off, it is advisable to do it at idle speed. If this is done under load conditions, it can shorten the tool life.

Make sure that the load does not exceed the permissible level. To do this, it is recommended to take breaks after every 15-20 minutes of work. This will prevent overheating of the engine.

Make sure the workpiece is securely fixed before operation. It is unacceptable for it to dangle and bend. Otherwise, it can be fraught with serious consequences for you.

READ  Replacing a Chain on a Makita Power Saw

Keep the area free of moisture.

Power

This parameter has a value in the range of 400-2000 W. The exact figure is determined by the class and scope of the tool. With an increase in power, the saw performance. This allows the user to spend less time and effort when cutting thick and dense material.

Main characteristics

Considering various models of circular saws for a stationary installation, first of all, it is necessary to pay attention to their performance characteristics, which determine the effectiveness of their use in solving a particular problem.

Stationary tool types

Circular saws vary in power and purpose. Professional tools of large dimensions are used in woodworking plants, sawmills, for example, sawing logs into boards and beams.

For small production volumes, smaller saws are used. Their size fits into a volume of up to 8 m³. This is the most common type that is used in private households, small and medium-sized businesses.

Such machines are divided into three groups:

  • Domestic use. Have a cutting depth within 40-50 mm
  • Table-top design. Cutting depth 50-55 mm
  • Stationary, with installation on a bed. Cutting depth 60-140 mm.

Advantages of bench-top machines

Circular saws: device and varieties

All circular saws, without exception, work according to the same principle. The electric motor rotates the blade, which is entrusted with the duty to saw and cut various materials. Circular saws can differ only in design. There are stationary models and hand-held ones. In addition to their dimensions, they differ in the way they transfer torque from the engine to the cutting disc. In stationary saws, a belt serves as a transmission link, while in manual saws this link is absent altogether (the disc is mounted directly on the shaft, which makes the tool less powerful).

READ  Which Circular Saw is Better to Choose

An integral part of hand-held and stationary circular saws is the support platform, which in almost all models has the ability to adjust. An exception may be a stationary model designed for opening boards. But all the others have the ability to adjust the depth and angle of cut. Quite convenient additions that increase the functionality of this tool.

Circular saw hand photo

In addition, battery models can be distinguished into a separate subgroup of hand-held circular saws. They, of course, are inferior to their wired counterparts in many technical characteristics, but surpass them in mobility and allow work to be performed far from power lines. Cordless circular saws are widely used in the construction of country houses.

Cordless circular saw photo