Connecting the Bosch dryer to the sewer

Where to put the dryer?

The wiring issue is also directly related to the placement of the machine in the room. On where and how it stands, and depend on the nuances of installation. So first choose one of the four options:

often the owners of dryers give preference to the so-called “column”, when the dryer is installed directly on the washing machine. Greatly saves square meters, which is what the occupants of small apartments and houses strive for. But just put one unit on top of another. you must follow the manufacturer’s instructions.

• Check that the depth of the washer is greater than or equal to the depth of the dryer. If there are discrepancies, the “bottom tier” will not withstand the load.
• Install special anti-tipping clamps and caps on the washer-dryer body. They come with the dryer, if the possibility of installation in the column is provided.
• Unscrew the legs of the dryer and fix it in the caps.
• Adjust the position of the dispenser on the building level.

It is strictly forbidden to mount the dryer in the column without a secure fixation!

There is another option. to use wall structures in the form of special rails. These clips are more reliable, but they are rarely used, as antislip mounts are many times more aesthetically pleasing.

You cannot disregard the provided clamps. They not only protect the washing machine from vibration, but also strengthen the stability of the “upper tier”, not allowing the equipment to tip down.

The option of installing the dryer in a niche made of plasterboard requires a special corner or cabinet. It is better to think about this in advance, even during the repair of the room. If possible, you can build with your own hands a two-story structure. to accommodate both the dryer and washer.

Even easier to determine the dispenser under the sink or kitchen countertop. It is only necessary to choose the model intelligently, so that it had a removable lid for recessed and appropriate size cabinets. The condensation dryer will “settle” in the kitchen especially well, as at the expense of free access to the sewer to connect the dryer to the drain will not be difficult.

There is no reason to fear the installation of a drying machine. in many respects the procedure for connecting to the communications is identical to the washing machine. The main thing is to think about safety and do not neglect the rules specified by the manufacturer.

How to connect the dryer to the sewer?

It is possible to organize the connection of the dryer to the sewer. Of course, it is possible to refuse this undertaking at all and drain the condensate manually, after several drying cycles, but such a method is not quite convenient. Modern appliances are able to remove the product of evaporation immediately into a pipe. so why not take advantage of such a possibility? Let’s understand how to properly connect the drain hose.

Installation options

Manufacturers of home appliances have several types of machines for drying laundry in their lineup: extraction, condensing and with a heat pump. Connection of each type of dryer has its own characteristics, which is caused by the principle of machines. For example, extractor models dry by extracting air with moisture into the ventilation system. Condensing products work as follows: heated air enters the chamber with laundry, collects moisture and passes through the established heat exchanger. Then the moisture settles in a special tray that should be emptied after each power on. As for the heat pump machines, they essentially work similarly to the previous version. The only difference is that the moist air passes through the evaporator instead of the heat exchanger.

In private homes and apartments, the most common solution is to install an exhaust dryer, which must be connected to a ventilation system and electricity. If it is not possible to remove the air duct, it is recommended to connect a condensation model, in which the water is drained either into a tray or into a sewer. Consider the two existing installation options: to the vent and to the sewer, but first let’s talk about how you can install a dryer in the room.

The functionality of these devices you can see on the illustrative video example:

Where to place the Bosch dryer?

The choice of the place where the dryer will be, not for nothing is given so much attention. After all, the features of installation will depend on it. There are several methods of positioning:

• On top of the washer;
• In the immediate vicinity of the washing machine;
• in a special cabinet or niche;
• Under a countertop or sink.

The most common option is the so-called “column”, when the dryer is installed on top of a washing machine. Then the equipment takes up less space, which is of great importance for residents of small apartments. However, it is not possible to put one device directly on the other, you should clearly adhere to the manufacturer’s instructions.

• First make sure that the depth of the washer is equal to or greater than the dryer. Otherwise, the “lower tier” will not be able to withstand the load.
• Then special anti-tipping caps and clamps are mounted on the body of the washer-dryer. They are most often supplied with the dryer (if this method of installation is provided). You can also buy them separately.
• After that, the feet of the dryer are unscrewed and the caps are installed.
• Adjust the position of the device by the construction level.

Important! It is forbidden to install the dryer in the column, if it is not secured.

You can also install the dryer using wall-mounted structures, which are special rails. This option is more reliable, but less frequently used, as the tilt-resistant caps look much more aesthetically pleasing. You should not install appliances without locks, because their function is not only to protect the washing unit from vibration, but also to ensure the stability of the “top tier”, they prevent the appliance from toppling.

If for some reason the owner does not want to use clamps, it is better to place the washing machine and dryer next to each other. This option is safer and easier to install, but requires additional space. Ideal if the place has a large area or if the dwelling has a separate room (a closet, a dressing room, etc.).д.), where you can place the appliances. In that case it is enough to bring the machine in, remove the transport bolts and level it.

It is recommended to buy a washing machine and a dryer in pairs, this will ensure that the dimensions are the same and will create a unified style in the room.

If you plan to mount the dryer in a niche made of plasterboard, then even in the process of repair, you should take care of the arrangement for this purpose of a special cabinet or corner. If possible, you can independently make a construction in two floors, which will comfortably accommodate both machines.

Even easier option is to install the dryer under the kitchen countertop or sink. The main thing is to choose the right model. It is important that its dimensions correspond to the size of the cabinet, and the lid was removable. The kitchen is the best option for a condensation dryer. This is due to the fact that thanks to free access to the drain, you can easily connect the device.

In general, the procedure for installing a Bosch dryer is similar to the installation of a washing machine. Therefore, no special difficulties are expected. The main thing is to keep safety in mind and act clearly in accordance with the rules contained in the manufacturer’s instructions.

How to install a dryer on a narrow washing machine

Manufacturers of household appliances for the home have several types of machines for drying laundry in their lineup: extraction, condensing and with a heat pump. Connection of each type of dryer has its own characteristics, which is caused by the principle of the machines. For example, exhaust models perform drying by removing air with moisture into the ventilation system. Condensing products work in the following way: heated air enters the chamber with the laundry, collects moisture and passes through the installed heat exchanger. Moisture is then deposited in a special tray, which must be emptied after each power-on. As for machines with a heat pump, they, in fact, work similarly to the previous version. The only difference is that the moist air doesn’t flow through the heat exchanger, but through the evaporator.

In private homes and apartments most often produce the installation of exhaust dryers, which should be connected to the ventilation and electricity. If it is not possible to take out a duct, it is recommended to connect a condensing model, in which the water outlet is made either in a tray or in the sewer. Consider the two existing installation options: to the ventilation and to the sewer, but first let’s talk about how you can install the dryer in the room.

You can see the functionality of these devices on a clear video example:

Does the “dryer” require a sewage system?

How does a tumble dryer dry clothes in general?? It’s simple: the wet laundry is processed inside the drum by hot air currents, the moisture evaporates and is removed from the chamber in the form of condensate/steam, etc.д. Consequently, the dryers are not connected directly to tap water, or to the sewage system, but sometimes such a connection may be necessary.

There are currently three varieties of automatic dryers on the market.

• Exhaust. A corrugated pipe is led to the chamber of the dryer, which takes the moisture from the machine directly into the room or outdoors. Such machines do not require connection to the sewage system, but they are rather fastidious.
• Condensing. In this case the waste moisture in the form of heated humid air goes through a cooling process, due to which the dry air and liquid in the form of condensate are separated. Condensate then flows out into a special tray. The tray must be emptied after each drying.
• Evaporation. Many people say that this is a kind of condensation dryers. Only in contrast to the classic condensing machines, the air is not cooled after operation, but on the contrary, it is heated, turning into steam. Steam is led from the dryer through a special hose either into a channel or directly into a drain.

Important! Condensing and evaporative machines can be connected to the sewer, but units with this functionality are very bulky!

Accordingly, more space is needed for their installation, but they also have several times more loading capacity for one cycle.

From the foregoing, we can conclude that in fact no dryer does not require a mandatory connection to the sewer to function properly. In the case of evaporation and condensation machines will have to empty the tray with liquid after each drying, which in general should not cause problems. If you want to automate the process completely, you can connect the machine to the utilities.

Types of dryers

These machines are divided into several types:

Using a drying oven is a real challenge. The clothes to be washed and hung by hand in the space provided. Excess moisture is blown away by fans that blow warm air into the drying chamber. Electric or air heaters are used for heating. It does not make sense to connect such a dryer to a sewer. It is enough to use the spin mode, and then transfer the things into the chamber of the drying oven.

The construction of a tumble dryer, as well as the principle of its operation, resembles a drying closet. The difference is the presence of a special drum, accelerating drying. The rotation makes the hot air penetrate the fabric much faster. In addition, after using the drum machine, the need for ironing things is reduced.

How to install the Bosch Drain Hose Accessory Kit for Bosch Heat Pump Dryers

In such an appliance, special programs are involved, which provide a rotation mode, things stop crumpling. Drum dryer does not require a sewer connection. It is only needed if there is no possibility to load the wrung out clothes, and the unnecessary water can be manually drained from the tank.

Dryers: basic types

Today on the market you can find a decent range of dryers from different manufacturers and models. They are all divided into 3 main types depending on the method of installation:

Automatic machines of the first type perform drying of laundry due to air drainage from the machine into the ventilation shaft. Condensation type models pass warm air through the drum, and then collect the condensate in one place. the collection container. It needs to be washed regularly, after each cycle. Devices with a heat pump function through the evaporator and output the excess moisture directly into the sewer.

The ventilation models are traditionally the most popular among buyers. Their installation is possible both in private houses and apartments. Machines of the other two types are less popular.

The most frequently sold and sought-after brands of dryers: Bosch, “Samsung”, “Siemens”, Miele, “Virpool.