Counterfeit Bosch Screwdrivers How To Distinguish A Counterfeit

The main differences between the fake and the original Makita

Makita has gone to great lengths to protect their power tools. Therefore, even by visual inspection, fake products are easy to distinguish. However, this must be done with utmost care.

What to look for:

The case in which the Makita power tool is supplied;

First of all, you should take a closer look at the container. The original and the fake are almost identical in color, but in the latter it may be too bright. In addition, you need to carefully consider the brand lettering. in the original, the name “Makita”. embossed and letters are embossed.

On a fake case, the brand name appears as a low-grade sticker or in hand-pasted letters. It is easy to check this. they are simply torn off with a knife, a fingernail. Therefore, when purchasing any Makita tool, inspect the suitcase with the device with extreme caution.

Further, the case latches can give out a fake. On the original containers, they have the brand name. “Makita”, and are made of gloss. The rivets on the fake suitcase are nameless and matte.

The gaps that are located on the lid of the suitcase are also different in the original and the fake. In the first, they may be completely absent or have the same shape. In the second case, the gaps of different shapes are made absolutely not of high quality.

IMPORTANT! The backlash of the original is very high quality, without dirt. A fake cannot boast of this.

Testing The Toughest Cordless Drills On AMAZON

Close attention should be paid to the back cover of the case. The original ones have the “Makita” brand inscription in embossed white letters. The fake suitcase does not contain this.

IMPORTANT ! Opening the original, you will see that each part has its own production number.

The Makita electrical appliance itself.

Taking the tool out of the case, you need to look at the device’s nameplate. This is a small table showing device markings, Makita country of origin and other additional information. In fake ones, it literally “eats out” the eyes, which gives out a fake instrument.

The original has a duller Makita lettering. While a fake is straightforward, it cuts your eyes with a bright red. Now regarding the markings:

• On real nameplates, the serial number of the unit is located next to the model brand. In counterfeit ones, the location of the production number is below the table;
• In genuine Makita devices, the table contains the markings for use;
• The Japanese manufacturer on the original tools is indicated as Makita Corporation Anji, Aichi, Made in P.R.C. In fakes, the last inscription is missing, or has different letters. China, Malaysia.

IMPORTANT ! Makita does not manufacture tools in the CIS. Original markings and countries where Makita factories actually exist:

• A. USA (USA).
• D. Germany (Deutschland).
• E. Japan (Japan).
• G. Great Britain (GB).
• R. Romania.
• Y / K. China (China).

As you can see from the list, original China is designated differently.

INTERESTING: Now on the market you can find “gray” models of electrical appliances. They are original, but not all markings are present on them. The main difference is that such Makita tools were imported into the country illegally. Even in spite of their authenticity, these models are not supported by the manufacturer. Therefore, there will be no warranty repair.

Now you need to take a closer look at the inscription not in the table, but on the instrument itself. Like the case, the original appliance bears the Makita brand name in embossed raised letters.

The color of the body of the device is greener than the original, and blue for the fake. over, the latter does not have the manufacturer’s inscription on a black base, the original has it.

Also, you should pay attention to the quality of the plastic parts of the device. In the original, they are made with high quality, even shape, the casting of fake components immediately catches the eye. traces of burst, poor-quality edges.

For example, in original Makita rotary hammers, there are several inscriptions on the additional handles of the devices. One is made by indentation and the other is white. Fake ones do not contain letters at all.

IMPORTANT ! There are such models “Makita”, which have a sticker with the name on the body. However, if you tear it off, then under it there will be an indentation Makita.

Makita tools: distinguishing the original from the fake

Makita Japanese electrical appliances are one of the most popular brands on the market. This is certainly a good thing, as the leadership shows the high quality of the instruments. However, there is a downside to the coin. with the growing popularity of “Makita”, the number of cheap Chinese counterfeits increases sharply. Therefore, today we will talk about how to distinguish the original of the Japanese manufacturer Makita Corporation from a fake tool.

Why Makita’s fakes are dangerous?

By saving on the purchase of a building device, you are putting yourself in great danger. Fake products do not follow the production technology, so the devices may fall apart during operation and cause harm.

Buy only original Makita appliances and you will forget about problems forever.

Battery charge and type

In fact, when buying a screwdriver, the user pays most of the cost not for the device itself, but for the battery and charger.

The more batteries, the more charge and, accordingly, the weight

That is, the most expensive thing in a screwdriver is the battery. And you can save on this in the production of fakes. What, in fact, is being done. It is rather difficult to distinguish a high-quality battery “by eye”. In order for the battery to have a good capacity, it uses several cans with batteries. The more there are, the more charge the battery can take. This means that a good battery with a declared high charge should weigh decently.

But here, too, there is a problem: very often batteries began to be found, in weight approximately equal to the originals, the charge of which holds very poorly. Autopsy revealed that several cans were simply filled with sand for weight. By the way, this is very common in Chinese power banks. It is extremely difficult to recognize such a battery, since it will show itself only in operation: after charging, it will most likely be able to work 2, or even 3 times less than the original. If the price of a high-capacity battery is too low, then with a probability of 99% we can say that it will not hold a charge.

Well, it’s worth saying a few words about the charger. This is the part of the screwdriver components that you shouldn’t save on at all. The fact is that cheap chargers often do not have mechanisms to protect the battery from overheating and overcharging. And this can further result in high costs for new batteries, since they will very soon fail with such operation.

How to distinguish a quality screwdriver from a cheap fake?

Details and functionality of the screwdriver

It is difficult to identify poor quality parts inside the screwdriver. The only thing you can focus on when buying is weight. A screwdriver that is too light should raise questions. This is due to the fact that quality products usually use metal components. While the fakes are plastic. And naturally, various gears and movable mechanisms fail faster.

Reverse functions, gear shifting, automatic head locking and power regulator. a standard set of functionality of a good tool

It is also worth noting that cheap fakes have a small number of different functional features. For example, rotation speed, power, reverse, head auto-lock, etc. The fact is that the implementation of such functionality requires the introduction of additional parts into the screwdriver and the use of special technologies. And this is already costly for factories engaged in counterfeiting.

Which cordless screwdriver is better: an overview of popular manufacturers and models (professional, semi-professional and household), average prices, screwdriver device, selection criteria. read the publication.

First glance

Quality screwdrivers from well-known brands can be distinguished immediately, at first sight and to the touch.

It has a balanced weight, fits perfectly and comfortably in the hand, and the material of the case is of high quality and reliable. Every part of a good screwdriver fits tightly and precisely to its neighbors. There are no backlashes and uneven gaps between them. Fakes are usually painted immediately assembled, while quality models are assembled from already painted parts. That is, paint sags and unevenness of its application should immediately raise suspicions.

In the hand, the screwdriver should lie comfortably, not creak or outweigh to one side. In general, high-quality models use plastic, which has a matte coating on the outside, but fakes and copies are almost always smooth, as if glossy.

Screwdriver warranty

Naturally, reputable brands are responsible for the quality of their products, therefore they give a guarantee and have a network of service centers around the world. The user, faced with a malfunction, can always count on a service center that will help to quickly fix the breakdown. But buying a fake is almost always a pig in a poke. It is not known what and when will break down and how to repair it later. You will have to use third-party services or try to fix the situation on your own.

A list of service centers is usually supplied with the warranty card.

In general, the guarantee not only gives the user confidence that nothing will happen to his tool, but also makes it possible to repair it in the event of a breakdown.

How to Distinguish Genuine BOSCH Parts from Fake Parts: Verification Tool

So, the BOSCH company has created a separate tool for verifying the authenticity of its products. KeySecure System. Using the system, you can check BOSCH electric fuel pumps, lambda probes, air flow sensors, starters and generators, fuel system elements for diesel engines:

• BOSCH pressure valves
• BOSCH discharge valves
• plunger pairs BOSCH
• BOSCH sprayers
• glow plugs

KeySecure labels have been attached to BOSCH products since 2007. In the beginning it was a simple 15-digit hologram code. In 2009, a scannable MAPP code was added to it.

In 2012, the last 6 characters of the 18-digit code began to be duplicated on the hologram.

To verify the original origin of the purchased part using KeySecure, you need to install the Android and iOS app. NeoReader.

Then you need to point the phone camera at the MAPP code of the sticker. the system will scan the code itself and display the verification result: text and with the help of multi-colored indicators.

• A green light will indicate the original origin of the part.
• A yellow indicator means a unique code, but often entered earlier. This may be a sign of a fake, the manufacturer recommends in such cases contact the seller and replace the part.
• Red code means that the MAPP code is damaged (the system cannot recognize the code), or such code does not exist.

Another way to verify the authenticity of the valve, injector, fuel pump and other diesel fuel equipment parts is using the MAPP code on the label. this is to enter it manually at www.protect.bosch.com.

How to distinguish an original valve, injector, fuel pump BOSCH from a fake?

17 September 2018 Category: Useful Information.

Do not blindly trust the advice on car forums and websites. It is better to start your search from the manufacturers’ official websites. It often happens that you can find entire sections or useful tools there that help protect the brand buyer from counterfeiting.

General recommendations

look at the inscription

As a rule, counterfeiters cheat in the production of spare parts. Your task. identify a fake.

Look at the inscription: in the case of BOSCH, it should be red. Black lettering color is used only for logo.

Pay attention to the picture: in the original BOSCH lettering, the corners of the letters S and C are “cut off” at a 45-degree angle. In the case of a fake. they stay level.

The brand name must be placed next to the BOSCH inscription. rivet logo.

look at the packaging

Packaging is very important. If the “shrubs” box is somehow made, then they will regret money for a normal plastic bag in which the parts are packed.

Remember that bags for BOSCH spare parts are made by the manufacturer from dense plastic of a uniform color (transparent, blue or green, depending on the spare part).

Remember to check the serial number of the part on the box and the part! Any defects, abrasions, weak imprint of the serial number for spare parts should alert you.

look at detail

When you look at a part, all lettering and logos on it should also be clear and legible. Chips, cracks, rough edges (unless otherwise provided by the design of the product) should also not be.

And also the original spare parts become on the part, which they are intended for, like a glove. Geometry mismatches, poor thread quality, questionable clearances. signs of forgery.

see the manufacturer’s catalog

Another secret. if you are well versed in the products of some company, it is quite difficult to deceive you.

For example, BOSCH has never produced valve seals. therefore, if you come across such a part under the Bosch brand, it is a fake. So, before choosing a spare part, do not be lazy to look at the manufacturer’s catalog.

Choose well-known, long-standing companies on the market that have managed to gain the trust of users, with a selection of catalog, corporate brand and related documents.

Please note that the price for products of well-known world brands is below the market average. also a sign of fake.

• How to distinguish an original Delphi valve from a fake one, we wrote here.

You will find fuel pumps, high pressure fuel pumps for a diesel engine in the catalog

Diesel Craft LLC
DIESEL FUEL EQUIPMENT
Registration number in the Commercial Register 392854

1) Screwdriver. 12V Bosch GSB12-2-Li fake

Information sticker

The original case always has a sticker with the serial number and marking of the country of origin. The number on the case must match the number on the instrument.

Filling

If the instrument was purchased from an authorized representative, it is not recommended to disassemble it, as there is a risk of losing the possibility of warranty service.

In the stuffing of an original Makita screwdriver and a fake one, you can find differences in the following details:

• switch. in a replica it has the simplest design and sharp corners, similar to those installed on Chinese-made tools;
• motor. has some structural differences. The original can also be identified by the laser markings. In the replica, the engraving of the motor is made by the method of spraying and corresponds to the class of products installed on Chinese-made tools.

Counterfeit tools can last for quite a long time, provided they are used carefully. However, when buying an original Makita screwdriver, you can be sure of the reliability of the device, as well as get warranty repair if necessary.

Fake screwdrivers, drills, hammer drills, angle grinders, saws with Avito 9.

A lot of counterfeit instruments are sold on Avito. copies from China, very similar to the original instrument and of terrible quality, and yet they are given out by little things that are immediately visible.

Battery

Pay attention to the characteristics of the battery of the model you are going to purchase. Often, a fake can be identified by color and shape.

Voltage

Before purchasing, check the voltage of the selected model on the manufacturer’s official website. So, for example, the Makita 627 model has a voltage of 12 volts in all configurations. Fakes are often labeled 14 or 18 volts.

The country of manufacture

The original has Japan, USA, China or Romania. Fakes have Malaysia.

Release Button Color

In the original, it is grayish in color. Red is fake.

Housing

External differences in the case are not obvious, you should take a closer look. It is possible to unmistakably identify a fake by the two sleeve chuck and the gray color of the tool power adjustment scale. On the original, the scale is drawn on a black background.

The tag on the Makita proprietary screwdriver is metal, contains information about the manufacturer, and the serial number and production date are stamped on the metal. On the replica you will find an ordinary sticker.

It is worth paying attention to the hook for attaching the tool to the belt. On a fake screwdriver, it can be hung and fixed in a certain place, and on the original. on both sides.

What household power tools are most often counterfeited?

Manufacturers of counterfeit products want to earn as much as possible, so they try to counterfeit tools of world famous brands such as Milwaukee, Makita, Bosch, Hitachi, Husqvarna.

But lately, handicraftsmen have begun to counterfeit and not very expensive instruments of Russian manufacturers, for example, “Fiolent” and “Interskol”. For some reason, DeWALT tools are forged less often. Of the fakes of the Makita tool, most often you can run into the 9069 grinder and the HR2450 rotary hammer.

From “Fiolent” the “craftsmen” liked the MP4-700E electric jigsaw, and from the “Interskol” model range. the D-350ER drill. There are many examples of falsification of existing original designs. But handicraft workshops went further and began to produce tools that have no analogues in the lineup of reputable manufacturers. The labeling of such models is also invented, so a vigilant buyer can check the model code on the manufacturer’s website and avoid buying counterfeit products.

In addition to the tool itself, consumables such as saw blades and grinding wheels are often counterfeited.

It is clear that a poor-quality grinding wheel or saw blade can cause injury.

Counterfeiters try their best to accurately replicate the look of the original branded instruments. They managed to achieve some success, but still the technology and production conditions do not allow achieving absolute identity. Therefore, by being careful, you can often avoid buying counterfeit tools.

Take a Bosch drill, for example.

On the original model, the name of the company is printed in three-dimensional letters, while counterfeit manufacturers often make the inscription flat or confine themselves to a cheap sticker.

Often a fake can be distinguished by the quality of the case. The texture on the plastic may be uneven, burrs and sagging may remain at the joints. A self-respecting manufacturer will not allow this. Sometimes clandestine workshops do not even bother to accurately reproduce the color of the case of the original model, but the difference can be noticed by a user whose collection already contains tools of a particular company.

On the body of a branded tool, you can often find rubber inserts, the handles of drills, circular saws, etc. are also covered with rubber.Inserts play not only a decorative role, their main task is to reduce vibration and increase the comfort of working with the tool.

The underground workers do not care so much about consumers, therefore they prefer to replace the rubber inserts with plastic ones, only of a different color. It is clear that the tool will not become more convenient thanks to them.

Sometimes a fake differs from the original in size and shape, but often counterfeit can be distinguished only by disassembling the tool.

Cordless drill / driver BOSCH GSR 12V-30. UNBOXING AND REVIEW

So, for example, in a fake Makita HR2450 hammer drill, the distances between the rotor plates “walk”. It is clear that one can not even dream of a good balancing of an instrument with such an anchor. In addition, the winding of wires in a low-quality copy is so substandard that it is difficult to make out what colors it is. Everything is clear in the original.

In addition to the tool itself, you need to pay attention to the box, the quality of the plastic cases, the complete set and the availability of instructions in Russian.

If any of these elements is in doubt, it is better to refrain from buying.

How to distinguish an original from a fake power tool?

Many readers ask how to distinguish fake brands from the original power tool. We decided to thoroughly research the issue and give a number of recommendations that will help not to waste your money.

How to calculate an uncertified instrument?

Each instrument must have a plate (nameplate) with the model code, main technical characteristics, and the PCT mark. Only in this case can you be sure that the tool is approved for use in Russia and adapted to the parameters of our power grid.

It is necessary to pay attention to the quality of the plate. Remember also that a certified instrument must have instructions in Russian.

Let’s define the terminology

It should be noted right away that there are outright fakes of brands and original tools that are not certified for sales in Russia.

In the first case, everything is clear. Fakes are made in an artisanal way, technical characteristics are not a priority for counterfeiters, the main thing for them is to more accurately recreate the appearance of the original model. Sometimes you can do it pretty well, but often a fake drill or circular saw can be recognized at a glance. Such household power tools will not only disappoint with their performance and durability, they can also pose a serious threat to the health and even life of the user. In the original technique of famous brands, motors are used, the winding of which is made with double-insulated wire. In counterfeit instruments, the insulation is single-layer, which significantly increases the risk of electric shock.

Where is it safe to buy a tool?

We have already mentioned that you do not have to worry about the quality and authenticity of the instrument purchased from authorized retail outlets and representative offices. Their addresses can be found on the websites of tool manufacturers.

We wish you a pleasant and safe shopping experience.

Bosch oil filter how to distinguish a fake

Recently, a significant number of counterfeit filters from the well-known German manufacturer of filter elements MANN-FILTER have appeared on the Russian market. Share this information, as in 50% of trading we saw non-original filters at the price of the original ones. The specialists of our company bought several of these filters for educational purposes. Well, let’s take a closer look.

The object of our research will be one of the most popular oil filters MANN-FILTER W914 / 2.

External differences
Box
Let’s start with the box. I must admit that the counterfeit MANN looks very worthy. At first glance, both cardboard packages practically do not differ from each other. The differences in printing and packaging quality are almost indistinguishable. But if you look closely, you will notice that the fake filter box is a little paler.
Opening the box:
The first thing to look out for is the print quality on the filter housing:

On the body of a fake MANN-FILTER, the print is significantly different from the original: the paint is pale, and the marking is blurred.

On the housing of an original MANN oil filter W 914/2, the seal is clear. The paint is in an even layer and allows you to clearly see the drawings and markings.

Filter cover quality
Now let’s look at the covers of the fake and original Mann filters:

The counterfeit Mann filter has a matte and faded metal lid. Small scratches and dents are visible from the compression of the middle part of the filter

The cover of the original MANN-FILTRE filter is shiny and smooth. No dents or scratches.

The cover profile of the fake and original MANN is also different.

The sides of the sealing gum at the fake are low, and the profile pattern of the lid is smoother

The sides that fit the rubber band of the original MANN filter are much higher. Cover profile pattern is clear

The quality of the sealing rubber mounted in the cover is significantly different

On a fake Mann filter, the gum can be easily pryed off with your finger and removed

With a real MANN-FILTRE filter, it is very difficult to pull the rubber band out of the cover, at least without using a screwdriver or other tool. In addition, there are three yellow stripes on the side of the elastic. most likely this is a special mark of the manufacturer.

MANN filter thread quality
And the last thing that can be seen with the naked eye is the thread of the center hole of the filter. By the way, according to many experts, a fake filter thread is one of the most common signs of a fake MANN-FILTER:

On counterfeit Mann, the thread is much simpler than the original filter. If you run your finger along the thread, you can feel that it is very rough, with small burrs that scratch the skin. This thread was most likely cut on a machine. Thread height one turn less than original MANN filter.

The threads on a genuine MANN-FILTRE are smooth, even and shiny. The finger does not cling to burrs. This thread is made, most likely, by a more technologically advanced, expensive and high-quality rolling method. In addition, the threads of the original Mann filter have one more thread. The thread quality factor plays an important role in the operation of the filter. When driving, the car shakes, and poor thread does not allow the filter to be stationary.

If you stick your finger into the filter outlet and feel the thread edge, and it turns out to be smooth and even, then the filter is most likely not a fake.

On a fake MANN filter, the thread edge is cut unevenly and roughly

Genuine MANN-FILTER has a smooth and neat thread edge
Internal differences
Now let’s pay attention to the factors that cannot be seen when buying a filter, but which clearly explain the difference between a fake and an original MANN filter.

Filter paper quality
The most important thing in a filter is the quality of the filter element, namely the amount of filter paper, the quality of its packing, structure and density. And here you can see a huge difference between fake and original MANN-FILTER filters.

On counterfeit manes, the filter paper is thick, loose and flaky

The real MANN-FILTER has thinner and heavier paper
At the fake MANN filter, the filter paper folds are glued unevenly: somewhere they adhere to each other, somewhere they lag behind each other.

This factor significantly affects the quality of filtration. During filtration, the dirt will very quickly clog the part where there is practically no gap between the folds, which will reduce the filtering area of ​​the oil, and as a result, the oil will be filtered with great difficulty. At the same time, the oil will be most strongly pushed where the folds are widely spaced, and most likely the filter paper will not withstand the increased oil pressure, as a result of which dirty oil will enter the engine

The original MANN filter has much more folds than the counterfeit filter. They are evenly spaced and fit snugly together. The filtering surface area of ​​such a filter is much larger, and the oil pressure on the folds is evenly distributed.

Now let’s turn our attention to the glue. In the case of a fake MANN filter, the folds are not neatly filled with glue, which reduces the filter surface. The glue itself is soft, you can easily wrinkle it with your fingers like plasticine. This can cause the filter paper to peel off during operation and contaminated oil into the engine.

In the original Mann filter, the folds of the filter paper are glued neatly, there are no glue runs. The glue of a completely different quality than that of a fake, which does not allow doubting the strength of gluing folds
Bypass valve quality
One important factor affecting the quality of the filter is the bypass valve. In the production of its filters, MANN-FILTER pays close attention to the size of the filter bypass valve for each individual vehicle model. Therefore, even filters of similar sizes, but with different valve characteristics, are not considered substitutes. Comparing the real MANN W914 / 2 and the fake one, it can be seen that they have valves of different sizes:
Filter housing quality
Now let’s look at the “glass” in which the MANN-FILTER filter element is located

Rust spots are visible on the inside of the case

The original MANN filter has a special protective coating on the inside of the housing that prevents corrosion
Move on. The part supporting the filter element of the false Mann filter does not fit in size, it is smaller than it should be. The filter element will crawl and rattle. there is no point in it. It happens that in fakes, a spring acts as a support for the filter element.

To check for a fake, you just need to shake the filter, if something rattles inside, then most likely it is a fake.

The original MANN filter has a slightly different shape, there is no spring, and the size is exactly the right size for this filter. The filter does not rattle, and the filter element is motionless inside.

The quality of printing on the filter housing. The original MANN filter has brighter and clearer.
2. Metal filter cover. The original Mann filter has a shiny, no dents or scratches.
3. The sealing gum of the filter (one of the simplest and most revealing methods of checking). In a real MANN filter, the elastic is recessed deeply, it cannot be pulled out by hand. The elastic has three yellow stripes. With a fake filter, the sealing gum can be easily pulled out by hand, there are no yellow stripes.
4. The quality of the filter thread. In the original MANN filter, it is even, smooth, without chipping. Thread edge neat.
5. The support for the filter element is exactly aligned with the bottom of the housing. If you shake the filter and it rattles, then the filter is fake.
This concludes our article. We hope you find it useful.

There is only one thing left to add: buy original MANN filters only from authorized distributors and suppliers.

You can also see this article in the original source: maslon66.ru/about/tradema.em-poddelnye-filtry-mann/

The correspondent of “KI” from his own experience was convinced that there is a defect among branded spare parts

The desire to independently change the engine oil in a car has arisen for a long time. But due to the eternal lack of time, I had to use the services of an auto repairman. Finally, curiosity got the better of it, and the other day I decided to independently make a small TO for my “Megan”, especially since we were running out of time.

I must say right away that the savings of 300-400 rubles compared to the replacement with the service station are insignificant. But the very process of “communication” with the car delivers sensations that can be understood by motorists who are used to caring for the equipment on their own. Another reason, in my opinion, is that the suction of used oil by the compressor is less effective than the good old drainage of oil through a plug in the bottom of the crankcase.

So, at first I refreshed my knowledge of materiel on the Internet, and did not learn anything new there. Then I bought the oil corresponding to the engine of my car. Elf w5-40, an oil filter from a well-known German company and a new O-ring for the drain plug (as recommended).

Because there is no hole in my garage, I went to one of the Kursk State Building Complex, where you can rent an overpass for 50 rubles per hour. After draining the old oil, he screwed the plug into place and began to tighten the new filter. And this is where the problems began. I suffered for a long time until I realized that I had either a marriage or a fake in my hands. the filter did not want to screw onto the thread. My guesses were confirmed by motorists from GSK passing by, pointing out the suspicious thread of the filter.

How to distinguish a fake

The original O-ring is color-coded with three yellow stripes on the side. As the experience of Internet users shows, their color and size may differ from batch to batch. The side that holds the seal is high and sharp, unlike a fake. It is almost impossible to remove the rubber seal on the original filter. On a fake, it falls off with little effort. The rubber material is also very different. on a fake it is softer and has a glossy side surface.

A subtle dot print of the factory laser markings and the date of manufacture is visible on the body of the original filter. There is no such marking for a fake.

The lettering and graphics on the side of the case also vary greatly in quality. On the original, they are very clear. On a fake, a slight blurring and less brightness of the paint is noticeable.

And finally, the threaded connection. The original filter has a very high quality and has one turn more than the fake one. In addition, the end of the threaded tube at the fake is chopped off, which is easy to identify by touch by sticking your finger into the hole.

INFORMATION TAKEN FROM THE INTERNET

Oil filter MANN W914 / 2. fake and original

Even a cursory comparison of two copies of the MANN W914 / 2 oil filter revealed the original and the fake.

Please note the differences in the texture of the yellow background.