Craftsman Lawn Mushiel What gasoline to fill. Craftsman 37093

What can and cannot be poured into a lawn mower and how to mix gasoline and oil

It is difficult to imagine a modern city without neatly trimmed lawns. Such beauty is blocked using gasoline lawn mowers, which are highly productivity, a high.quality result. The engine of such an unit is quite demanding in relation to the quality of fuel and lubrication.

The use of unsuitable gasoline or engine oil significantly reduces the resource of the device, can lead to serious breakdowns. It is important to observe the correct proportions when preparing a refueling mixture, strictly adhere to safety rules.

What gasoline is poured into the lawn mowers

The power unit of lawn mowers in its design is similar to the usual automobile motor, so the fuel system and ignition work according to the same principle. Gasoline through a carburetor or injector enters the cylinder, where it is mixed with air and is set on fire using a spark plug. The engine drives knives that directly cut the grass.

The quality and durability of the apparatus depends on the quality of lubrication, fuel.

Gasoline requirements

For lawnmands, ordinary car gasoline is used, which can be purchased at any gas station. For the motor to work in optimal mode with maximum return, gasoline of the brands of AI 92, 95, 98 is suitable.

Increased octane number reduces detonation.

Engines that were developed in the last century are used here, therefore, the use of modern fuel grades is not always justified. This is due to the fact that it takes more time to complete combustion.

On the other hand, the sulfur and resins are increased compared to the requirements of GOST 32513-2013.

The deposition of resins on the walls of the fuel system violates the proper formation of the air fuel mixture. Sulfur increases gasoline fuel combustion temperature. This leads to increased wear of the internal movable elements of the engine.

Most of the gas mowers use unhealthy gasoline of the AI-92 brand.

The manufacturer’s recommendations should be followed. In this case, the engine resource will be maximum.

The choice of oil and how to mix properly

Structurally, the gas mowing engine differs from the car power unit with air cooling, the number of cylinders. The closest will be the Mopeda motor. One cylinder is used here, air cooling. For a mower, motor oil for two.stroke or four.stroke engines is completely suitable.

In addition, the design features of the fuel system should be taken into account. For example, for power units with forced fuel injection, a more modern lubricant is needed to classify the API. In other words, engine oil or SL is suitable for injectors.

Motor oil can have a mineral, semi.synthetic and synthetic basis.

For newer engines, synthetics are suitable, for “old men” only mineral water will be the best option, since other types of lubrication can damage rubber seals and gaskets.

Viscosa-temperature properties here do not have a decisive value. This is due to the fact that the grass has to be mowed only in the warm season at moderate temperatures.

In the case of a two.stroke engine, an oil dispenser and a separate tank is absent, so gasoline here needs to be mixed with engine oil. Only a special two.stroke composition is suitable here. Fuel and lubrication in such circumstances does not burn out completely. This explains the overheated oil smell.

Despite this, in no case can I save on grease, because due to friction the moving elements of the engine will wear intensively.

Dimexide from soot in the engine is the real benefit and harm according to the reviews of 2021 of the deposit and the fog inside the engine extremely negatively affect its technical characteristics. Power is lost, fuel consumption increases. Throughout the entire life.

Mix the components of the fuel mixing mixture in certain proportions. For example:

  • Inside the liter tank you need to pour 980 ml of gasoline and 20 ml of engine oil.
  • You can cook 10 liters of solution separately. To do this, you need 9800 ml of fuel and 200 ml of lubrication.

It is important to strictly observe the proportions. If at least a little “overdo it” with an oil component, then soot will form on the walls of the combustion chamber.

In the case of a four.stroke engine, a separate oil tank, a dosage system is structurally provided. Here the lubricant is added automatically in the right proportions. The user only needs to control its level inside the tank and, if necessary, add to normal.

How to refuel correctly

In no case can you save on the quality of fuel and oil. Inappropriate gasoline will contribute to the engine clogging. For refueling it is better to use pure unhealthy gasoline. It is advisable not to shed it to the ground.

It is not recommended to fill the full tank, because when working, the engine heats up hard. This leads to intensive fuel evaporation, increasing pressure inside the gas tank.

Before refueling, it is important to determine the maximum permissible fuel level using the operating instructions.

It is necessary to pour gasoline only in a cold lawn mower. Before pouring, be sure to wipe the lid with a clean rag. It is important to ensure that any garbage does not get inside the fuel tank. It is for this that special watering rods, tips are used.

The culprits of the blue smoke. oil scrap rings or caps? Blue smoke clubs in a working car indicate the ingress of motor oil inside the combustion chamber. Under the influence of high temperatures, the lubricant burns, forming a carpet on the valves.

Lawn mowers Craftsman. Description of the lineup. Recommendations for operation and maintenance

To facilitate heavy physical labor, many smart devices, tools, and productive equipment have been created. Garden care, putting in order an ever.overgrown lawn is one of the labor.intensive work. Modern lawn mowers and trimmers for grass with different drives. electric, gasoline, battery, easily cope with this task.

For owners of personal plots, suburban cottages, heads of utilities and park farms, it remains only to choose the most optimal option on functionality and price. In order not to be confused in the variety of garden equipment for mowing grass and haircuts of the lawn, we will talk about the lawn mowers of the Craftsman trademark.

Recommendations for the operation and maintenance of lawn mowers

Craftsman lawn mowers are produced in the United States, characterize high quality components, components and parts, exemplary assembly. According to consumers, we can judge that the technical characteristics declared by the manufacturer fully correspond to work in real conditions.

First Start

The new machine is supplied to consumers without working fluids. without oil and fuel. In general, the entire unit is assembled at the factory, the owner needs to install only nodes arrived in disassembled form: handles, grass collector, multi.tacitan door, in accordance with the instructions in the instructions. At the first filling of the crankcase, it is necessary to pour approximately 540 ml of oil. The first change of oil is performed after 5 motorcycles, further after 25 hours of work or daily.

Oil, fuel

Craftsman’s lawn mower consumes unhealthy AI-92 gasoline, high-quality SG-SL motor oil for four-stroke viscosity engines SAE 30-at plus temperatures, SAE 10W-30-at negative ambient temperatures.The use of improper oil can lead to its overspending, as well as to breakdown.


  • It is necessary to contain a gasoline in good condition: after each use, clean from pollution, grass and other garbage, check the reliability of fasteners and tightening of moving joints.
  • After 25 motorized hours or they produce: lubrication of nodes, checking or sharpening knives, testing drive belts, cleaning the air filter, changing oil, inspection of the muffler.
  • After 100 hours of operating time, the spark plug is changed, air filter.
  • When mowing grass on sandy soils, the replacement of the blades should be made more often.
  • You can hide the knives with a file or using a sharpener, given the compliance with balancing without fail.
  • For the information of the owners: the Maxi-Clean air filter extends the service life of the Craftsman lawn mowers. The spark plugs are treated with special platinum spraying for greater reliability.
  • During the operation of the Craftsman lawn mower in conditions of increased dust, pollution, at high load, high temperature, maintenance is carried out more often than the maintenance schedule is regulated.

Elimination of malfunctions, breakdowns

To extend the service life of the Craftsman lawn mower for as long as possible, it is necessary to observe the rules of service prescribed by the manufacturer, and the execution of adjustment. It is much easier to prevent breakdowns and malfunctions than to correct annoying misses and omissions. As the experience of many gardeners testifies, non.compliance with the elementary rules for caring for a machine can provoke serious malfunctions.

Pay attention to some especially important recommendations of the manufacturer during the operation of units

  • All work on the maintenance of the Craftsman lawn mower, including adjustment of the height of the cut, the height of the wheels, is allowed to carry out with a fully turned off the engine.
  • Follow the maximum allowable angle of inclination of the lawn mower 15 °.
  • You should not overfill the fuel tank with gasoline, and the engine with engine oil. otherwise the Craftsman lawn mower will smoke.
  • It is forbidden to change the settings of the engine speed regulator, exceed their permissible limit.
  • The engine does not start most often due to such reasons: lack of fuel, poor.quality gasoline, contaminated filter, spoiled spark plug.
  • Power loss occurs when the speed of movement is inconsistent, an excess of oil in the engine crankcase, the crowd of mowed grass under a lawn mower, a contaminated air filter, a knife stuck in too thick grass.
  • Increased vibration occurs due to problems with a knife or crankshaft.

Description of the main models

Craftsman 77374

This lawn mower is one of the best among the goods that are designed to bring the lawn in a neat view. A big plus of such a lawn mower is that it can make a neat lawn in the so.called “wild” territory where various relief irregularities are found.

In addition to uneven relief, Craftsman 77374 is also not afraid of even the most rigid weeds, which are beyond the power of many other lawnmands. Many of you have come across such that the mower was out of order after contact with stones or bumps, which did not allow the whole system to continue to work normally.

If you know that this can happen again, then it is this model of the device for cutting the lawn that will become ideal for your site, because Craftsman 77374 is not at all afraid of objects found in its way. Speaking about appearance, many do not understand why in this model quite large wheels are used, which do not give the beauty and accuracy of the appearance of this lawn mower.

In fact, everything is quite simple, because thanks to such wheels, the lawn mower gets the opportunity to better maneuver, so you can give a beautiful view to your lawn even in the most inaccessible places, and the appearance is far from the most important factor that should be used when choosing this unit. Note that the lawnmands on wheels are very popular among owners of plots with an uneven landscape.

Craftsman 77374 is produced in the United States of America, and its guarantee, which is provided by various places of sale of the aforementioned lawn mower, is 2 years.

Power is 6.25 horsepower. It is worth noting that this is a fairly high power for the lawn mower. To make it more clear to you, the average power of the standard lawn mower is approximately 4.5. 5 horsepower.

It is thanks to the high power of the motor that this gasoline trimmer for the grass leaves absolutely no chance of weeds and even the most stringent shrub plants that are found in his way.

The weight of this lawn mower is 34 kilograms. Comparing with other models, not only Craftsman brands, but also with other leading world manufacturers of this kind of goods, we can say that this is approximately standard weight.

The width of the seizure of the territory is 0.56 meters. If someone is not clear, then it is precisely such a width of the territory of your site that the trimmer for the grass relieves the grass at a time. As you can see, this is a fairly convenient device, but if you are not satisfied with its pricing policy, then here you can familiarize yourself with other electric lawn mowers with trimmers.

Type of fuel on which gasoline works. The volume of the tank is 1.5 liters. Quite a standard set for this type of technique. Perhaps you will not suit this device for one reason or another and then you can press here and find out about other gasoline lawners.

Craftsman 37034

We present to your gaze the Craftsman 37034 lawn line, which works on gasoline. Another model of the United States lawn mower, combining simplicity and ease of use, as well as the power that is hidden under the Craftsman 37034 case.

If you live in a private house or like to spend warm days in the country and are used to it that everything is neat and beautiful, then you must purchase this lawn mower for yourself. As they say: they meet on clothes, and escorted by the mind.

Husqvarna 137 chainsaw characteristics will please even the most spoiled consumer.

Only here you will find instructions for managing a forklift, which will explain in detail all the nuances of working with this transport.

Few are aware of the size of the KamAZ dump truck, and in order to correct this misunderstanding, click here // MachinSpec.COM/str/samosval/novyj-kamaz-6520.HTML.

Of course, the first thing that catches your eye, for example, when guests come to you, this is the appearance of the house and site. Using the Craftsman 37034 lawn mower, you can always maintain the wellness of your site even in the most seriously affordable places.

Due to its design, unlike many other lawnmands, Craftsman 37034 without problems removes excess vegetation near the fence, in the corners and even under the benches, if you have such on your site. Perfectly even and beautiful lawn in a short time, all this can be obtained thanks to the use of the aforementioned lawn mower.

The warranty coupon that the manufacturing company draws up is designed for up to two years, that is, if something happens with the lawn-mowl you purchased due to the fault of the manufacturer, then they will fix it for free. Average

A four.cylinder engine that provides the operation of the lawn mower with a power of 6 horsepower. Note that a very powerful engine is built, thanks to which Craftsman 37034 will easily lead your lawn to a neat form, not paying attention to all obstacles found in the grass.

There is a removable grass collector that will make a lawn haircut much more comfortable. Not all lawn mowers have the possibility of installing a package in which all the garbage enters after the lawn haircut, but this is not about our model. All you need is just to drive a lawn mower, and after a haircut, take out a grasshopper and shake the grass out of it.

Do not forget that Husqvarna mentioned above is the manufacturer of the Craftsman brand. However, when buying a product with the name of such a brand, demand official documents that will indicate that the product is really the original.

Also in the original products of the aforementioned brand there is always a warranty ticket for a period of 24 months. Therefore, if something happened to you has done during this time not through your fault, then replacement or repair will be made free of charge.

“I have a plot of 20 acres, about 15 of them is constantly growing grass. The territory is even, without a garden and hills, a clean lawn. Therefore, I needed a maximum capture width with a long supply of operation. In this regard, Krapstman 37820 perfectly suited me. It is convenient to work: rubberized handles, light start, dressing smooth, and the speed of work can be set yourself. Pros: a large bevel width, multifunctional, American assembly. Cons: Big noise, and whimsical to the fuel “.

Craftsman lawners (Craftsman)

Craftsman lawn mowers are created for daily operation in medium and large areas. They are equipped with reliable components, which are distinguished by increased endurance and prolonged working resource. This allows the brand brand mowerpoints to successfully cope with thick shoots and large wild weeds, showing solid performance even when working in bad weather conditions.

The history of the American brand Craftsman began in 1927. The company introduced its first products. a company power tool and a lawn mower in 1929 and 1934, respectively. In the 30s, the economic crisis struck in the USA, but the recently created enterprise survived. In this he was helped by farmers who actively bought up files, hammers, hacksaws and other tools produced by Craftsman for their farms.

Today the American brand is known around the world. Law share of its production is occupied by lawnmands, the number of advantages of which include high reliability, efficiency, suitability for repair. Craftsman lawn mowers are equipped with many useful functions that make work with the equipment of the American brand as simple and pleasant as possible.

The selection of oil for the lawn mower is useful recommendations from professionals

If the instructions for the tool were lost, and difficulties arise with the choice of suitable oil, then it is recommended to stop your choice on the next two options:

  • Semi.synthetic. cost cheaper than synthetics, but more expensive mineral water. Suitable for technology, both production and foreign. Have low smoke parameters, and adequately “care” about structural elements of the motor. Are made through a distillation of oil products and hydrocarbons
  • Synthetic. expensive types of lubricants that are suitable for all types of technology. If you use synthetics for your trimmer for grass, then the tool engine will work like a clock

When choosing and buying oils for breeding with gasoline, you can encounter the fact that some letter designations are indicated at the cans. These designations are the classification of the API, which will be useful to find out who wants to fill the lubricant suitable for the parameters in the tool. Consider all types of oils according to the API classification for two.stroke engines:

  • TA. intended for air.cooled devices, the volume of which is up to 50 cm3. Such equipment includes mopeds, lawn mmores, trimmers for grass and motorcycles. The optimal solution for lawn mower and trimmer for grass
  • TB. used to refuel engines such units as mopeds, chainsaws, scooters and motorcycles. The volume of engines of such equipment is from 50 to 200 cm3. This type of oil is also suitable for trimmers
  • TC. designed for dilution with gasoline and filling in motorcycles, snowmobiles and other types of land equipment
  • TD. serves to refuel boat engines, hydrrosa and boats

API classification is an American standard used in Europe. However, when choosing, there are additional designations on the canister of oils for two.stroke engines, for example, FA, FB, FC, FD and others. This is a classification of smoke emissions that is developed by the Japanese JASO standard. If there are such designations on the selected oils for trimmers and chainsaws, then it is necessary to take into account their decryption:

  • FA. are applied in states in which the law is provided by minimal emissions of smoke into the atmosphere. During work, an inconspicuous fog of smoke is distinguished
  • FB. are designed for use in countries where strict limitations for ejecting smoke into the atmosphere. Practically do not distinguish white smoke
  • FC. smoke in the atmosphere stands out transparent, and not noticeable to a person
  • FD-Begily types of oils for 2-stroke ICEs that do not emit smoke, but also have improved indicators of chemical properties. They are usually used for mixing with gasoline and refueling boats, boats and yachts

If there is a designation “Self mix” and “Pre mix” on containers with a lubricant, then they mean. independent mixing with gasoline (the first option that does not require shaking), and the need for forced dissolution (second option).

It is interesting! Oils for two.stroke engines are marked with designation 2t.

Knowing the classification of oils by their types, it will not be difficult to choose the best option for your brand of the lawn mower

On the market you can find a variety of grades of oils for two.stroke engines, but it is better to pay special attention to such firms:

  • STIHL. produce mineral and synthetic, and semi.synthetic this brand is rare
  • Shell Helix Ultra. recommended by specialists
  • Motul
  • Oleo-Mac
  • Echo
  • Hammerflex
  • Lukoil is an oil that costs 3 times cheaper than foreign analogues, but has excellent quality indicators

Product are not indicated, since their cost is changing. There are many other brands, and if you still want to find for yourself an ideal lubricant for a trimmer for grass, it is recommended to watch the test in the video below.

22 inch craftsman 159cc carburetor cleaning

It can be concluded from the video that it is not always useful to buy expensive oils, since they may turn out to be unsatisfactory quality, which can be seen on a real example.

Oil selection conclusion! For motorcycles, trimmer for grass or lawn mower it is better to choose synthetic or semi.synthetic oil with TA or TB marking. At the same time, take into account the recommendations of the manufacturer, since some manufacturers of high.quality equipment can recommend only synthetic lubricants.

Quality, gasoline characteristics

Gasoline for lawn mower. a regular car. It is easy to buy at any gas station. Different gas stations offer gasoline AI-76/80/92/93/95/98 gasoline. There may not be a specific gas station in gasoline. Be sure to check whether the refueling is selling gasoline grades 92/95/98. it is this option that is necessary for the clear operation of the engine with maximum return.

Due to other hydrocarbon additives, the increase in the octane number reduces the detonation of the engines. But high.octane gasoline for complete burning requires more time. Rare models of benzocosyles have a separate or main engine that may require diesel fuel, not gasoline. In hypermarkets selling garden and harvesting equipment, gasoline mowers are mainly sold.

What gasoline to pour into a lawn mower with a four.stroke engine?

Now let’s tell you what gasoline to pour in a lawn mower with a four.stroke engine, the main difference of which is the presence of a crankcase. It contains oil for lubrication of the motor, therefore, in order for the device of this type to function normally, it is enough to season it only with gasoline. However, there are its own characteristics. Since the technique does not have an oil filter, which means it is not cleaned, it must be changed approximately every 50 hours of operation.

As for gasoline, who need to refill the lawn mower, it should not be a higher brand than recommended by the manufacturer of equipment. Since the higher the octane number, the longer the fuel burns. And this, in turn, can lead to significant problems and premature breakdown of the tool.

Everyone knows well that gasoline is a very easily inflammable substance, and its pairs are explosive. Based on this, we recommend always observing several simple rules that will ensure security for each user:

  • Before refueling, you need to let the engine cool down.
  • Pour only 92nd gasoline (not lower);
  • You can not work with fuel if there is open fire nearby, it is also forbidden to smoke.
  • To avoid poisoning with exhaust gases, pour fuel and launch in the open air or indoors with good ventilation.
  • It is not recommended to refuel the tank completely, it is necessary to leave a place to “expand” gasoline, which always occurs when it is heated.
  • Try to so that fuel does not fall on your clothes and shoes.

In general, the maintenance of gasoline engines of the lawn mower. A rather simple thing that does not require any special knowledge and skills from you. For units with a two.stroke engine, you need to learn how to prepare the combustible mixture correctly, as well as to clean the air filter in a timely manner. It is enough to change the oil with a four.stroke engine to change the oil and clean the air filter so that it serves you for many years by faith and truth.

Online store “Gardener”. make shopping from us is always pleasant

It is beneficial and convenient to cooperate with us because we:

  • We sell high.quality products, which is confirmed by certificates;
  • We allow, using our site, making purchases without leaving home;
  • We deliver to any region in more detail about the conditions for transporting goods can be found on our website;
  • All goods are provided with a mandatory guarantee and service is carried out.

If you could not decide which gasoline to pour in the lawnical mower, ask our specialists of interest to our specialists by phone: 7 (495) 135-29-39 every day from 10.00 to 20.00. They will provide all the necessary information for free for free.

What to look for when choosing oil?

When choosing oil for your lawn mower, you need to pay attention to the manufacturer of products. Preference should be given to the brand that is indicated in the instructions for the technique. A large number of manufacturers of this technique are engaged in the production of their own oils. They should use them. They positively affect the performance and life of the equipment. When choosing, you need to focus on the overall characteristics of the lubrication, which are given in the instructions. It is forbidden to use the first one that falls, no matter which lawmaker is: self.propelled or gasoline. Do not buy the most expensive lubricant, it may not approach a specific model. There is no universal option.

The oil is recommended to change every 50-60 hours of operation of the lawn mower

What oil can not be filled?

It is forbidden to pour a lubricant on the 4-stroke gas mowing engine, on the label of which there is 2T labeling-it is designed for two-stroke. After purchase, fuel is stored no more than 2 months. It is forbidden to use polyethylene canists for storage. As a result of the contact of fuel with the internal walls, static electricity may occur. If a spark is accidentally appearing, an explosion may occur. Today, special canists made of plastic appeared on sale, on which the marking “Flame” is worth.

The operation of the lawn mower depends on flooded gasoline and oil. No need to save on them, otherwise the technique will quickly stop performing its functions, you will have to repair it.

The principles of choice and characteristics of the knife

As a rule, the manufacturer always cares that in the basic configuration of its products there is all the necessary equipment that guarantees high.quality operation of the device. In standard configuration of the lawmaker of the CRAFTSMAN, there are necessarily two knives:

  • Sharp knife designed for grass cutting. It has wide blades and is one.sidedly sharpened. This is necessary for a high.quality and fast cut of grass at a given height.
  • Special knife for mulching. He finely dissects the grass and passes it further to the grass collector. You will learn about how to mulch the lawn with a lawn with a lawn mower here.

That’s what 100% never and under no circumstances can be saved, it is on choosing knives for a lawn mower. This is due, first of all, by the fact that the highest speed of rotation, as well as significant loads caused by the resistance of herbal stems, greatly affect the knife blades.

It often happens that shock force can even damage the integrity of the knife. It is for this reason that only high.quality knives from trusted manufacturers must be chosen, and followed by their constant bow.

In the case when the stalks of grass are not cut off, but simply torn, this can adversely affect the appearance of the lawn and even lead to its disease, or the so.called baldness.

The blows that come to the knife often violate the entire system of balancing of this device, and this, in turn, leads to a strong vibration and breakdown of the bearings. Also, a continuation of the chain reaction is often the failure of the bushings of the gas mowing motor and its wheels.

As for the mulching knife, it is also important. With its help, grass is crushed, which will continue to be evenly distributed throughout the lawn area and will become a good, and most importantly, natural type of fertilizer.

  • It should be preferred only to proven brands that cooperate with manufacturers of this technique and guarantee a high quality class of knives;
  • When choosing, it is necessary to give a report on how, how and where the device will be operated, what loads will be subjected to. And only on the basis of these data, one can give preference to certain variations of knives;
  • It is necessary to take into account the specific features of each of them, their shape and type of sharpening, for the selection of knives for mobile and mulching.

Perhaps after this procedure you will have to think about replacing the fishing line in the lawn mower, because if the device fails, then you need to check all its components.

Manufacturers and prices

For the normal functioning of the device, it is necessary that it be equipped with the corresponding knives made under the brand Craftsman. Lawn mowers of different brands necessarily differ in a specific form, which is combined with the shape of the deck and contributes to the creation of optimal aerodynamic properties for mowing and assembling grass.

It is important to remember that the sharper the selected knives, the better the grass will be cut off, and this is a fact. And by clicking here you can find out about the lawn mowers for high grass.

CRAFTSMAN. How To Choose the Right Gas Walk Behind Mower

Craftsman knives are made of special hardened steel, which has an additional powder.type coating. This allows us to talk about a longer service life and providing a knife as evenly as possible and accurate mowing.

Consider the most popular knives models:

  • Craftsman 942-0741. This type of knife is ideal for use in self.propelled gasoline mowls Craftsman. They perform the function of the cutting element, and thanks to its excellent operation, the lawn is given a more beautiful and well.groomed appearance. The knife is made of steel. Its length is 21 ″.
  • Craftsman 421825. This knife is used to mow grass. It is made of especially shockproof steel. Its main task is the evenness and accuracy of mowing. Characterized by a large resource of work and is able to last a very long time.
  • Craftsman 5321592-67. This Craftsman brand knife is a great option for professional use of a mower. The most durable and sharp as possible, withstands blows. Knife length 22 ″.

Surprised that the part of the unit alone can fly out to you in a penny? Then read this article in which you will learn how to assemble a lawn mower from a vacuum cleaner with your own hands, so your family budget will suffer less losses.

Working with a mower

Acquaintance with a mowing

Before starting work, carefully read this guide and fulfill all safety rules that are indicated in it.

Comparing the shown in the figure with a real device, study the type and location of the main nodes, controls and adjustment organs. Save the benefit in case you need some information.

These symbols may be present both on the mower itself and in the operating manual.

Operator Present Control Bar Operator’s
Drive Control Bar Travel management lever
Handle Knobs Fixers
Engine Oil Cap with Dipstick Maslenka with a level of level
Spark Plug Spark plug
Muffler Muffler
Wheel Adjuster (on Each Wheel) Wheel height adjustment levers
Housing Frame
Mulcher Door Multicher door
Air Filter Air filter
Gasoline Filter Cap Gasoline filter head
Grass Catcher Grass collector
Starter Handle Starting key
Primer Pumping pump
Drive Cover Drive cover

Important: this model is supplied without oil and gasoline. Compliance with CPSC requirements. The rotary mower with the front location of the working part of the production of SEARS satisfies the standards of the US National Institute for Standards and the US Safety Commission for Consumer Products. The blades rotate when the engine works. The operator’s presence control handle. should be pressed to the handle in order to start the engine. The released handle stops the engine.

Pumping pump. Sets additional fuel from the carburetor to the cylinder when starting a mower in cold weather. Starting key. To start the engine. Multicher door. allows you to move the mow to collect grass in bags or to throw it on the lawn. Travel management lever. used to drive a self.propelled mowing.

Important! When working with a mowing, always put on the goggles. When working as a mower of any type, there is always a chance that some object will fly out from under the blade and get into the eyes, which can cause serious damage to the eye. While working with a mowing and during its maintenance, you should always wear goggles. We recommend ordinary protective glasses or a special front mask with a slot, which is worn on top of ordinary glasses.

Operation of a mowing

Engine rotation speed. The engine speed is installed at the manufacturer for reasons of optimization of the mowing work. There is no way to change it.

Engine control. Attention: federal legislation requires that the engine control is installed on mowers of this type. This is done to reduce the risk of injuries due to touching the car’s blades. Under no circumstances try to get around the engine control. the blades begin to rotate as soon as the engine is launched. This model of the braid is equipped with the operator’s presence handle, so that the operator should stand behind the car from the handle in order to start the engine.

Drive management. The self.propelled movement of the braid is controlled by the operator using the control handle: the operator’s position control handle should be pressed to the main handle, and the drive control handle is raised to it. The closer the last one to the main handle, the faster the braid goes. The forward movement stops if you release either the operator’s position control handle, or the drive control handle. In order to stop the mower, without turning off the engine, release the drive control handle. To move forward without the help of a self.propelled device, press only on the operator’s presence control handle.

Operator Present Control Bar. Operator’s. Drive Control Disengaged. The drive control is turned off. Drive Control Engaged. Driving drive is included.

Setting up the haircut height. For a low haircut, the wheels should be raised, on the contrary, lower them, thus, you can change the height of the remaining grass. For most lawns, the average position of the blade is preferable. To change the height of the haircut, move the adjusting lever towards the wheel. Raise or lower the wheel as you need. All four wheels should be in one position.

Note: with proper regulation, the spike of the adjusting plate should tightly enter the hole on the lever. If the machine is equipped with a 9-position height switch, then in this case the lever can occupy an intermediate position between protrusions on the plate.

Changing the configuration of the mowing.

In standard configuration during delivery, this model works as a multicore. To change the work of the mowing (collection/discharge of cutting waste), it is necessary to do the following:

  • Open the back door of the braid and attach the mounts located on the frame of the grass collector to the rotary brackets.
  • To change the mode of operation of the mowing for mulching or emissions, they follow the grass collector and close the back door.

Rear Door. Back door; Pivot Bracket. Rotary bracket; Grass Catcher Handle. The handle of the grass collector; Grass Catcher Frame Hook. Fastener mounting.

  • The back door should be closed.
  • Open a multicore door and install a deflector under the door, as shown in the figure.
  • Now the mower is ready to work in the mode of throwing grass on the side.
  • To go into mulching or collecting grass in a bag, you should remove the side deflector and close the door.
  • To organize the ejection of grass from behind, it is necessary to remove the deflector, close the animal door.

Unlock Latch. Open the clamp; Open Mulcher Door. Open the animal door; DISCHARGE Deflector. Deflector.

Attention: it is forbidden to launch a mower if the back door is open, a deflector or grass collector is installed. Do not operate the mowing if the back door is removed or partially open.

  • Having taken the handle of the frame, remove the grass collector.
  • Open the clips of the grass collector located under the handle of the mower.
  • Devastate the grass collector, holding it by the handle of the frame and the handle of the bag.

Grass Catcher Frame Handle. Pen located on the frame of the grass collector; Bag Handle. The handle of the bag.

Preparation for the launch of the engine

Pour oil. The mower is supplied without oil in the engine. Type and type of oil cm. In the section “Engine” in the chapter “Maintenance”. Attention: do not pour too much oil, otherwise from the silencer when starting it will be greatly smoke.

  • The mower must be installed on a flat surface.
  • Remove a level from a masteum nose.
  • A container with butter is supplied with a mower. Its contents must be completely poured into the oil. Pour it slowly. Note: At the first refueling, you will need 18 ounces (about 500 grams) of oil, because the engine has a little oil after factory tests. In the future, when changing the oil, its consumption is 20 ounces (about 570 grams).
  • Insert and tightly tighten the level meter.

a. Each time before starting work, you need to check the oil level. If necessary. add oil to the line on the level indicator. B. At any time of the year after every 25 hours of work, you need to change the oil. When working in high dusting conditions, oil must be changed more often than 1 time at 25 hours. Cm. Section “Change of oil” in the chapter “Maintenance”.

Gasoline refueling. Pour gasoline to the lower edge of the neck of the tank. Do not overwhelm the tank. Use ordinary fresh unhealthy gasoline with at least 87. Do not mix oil with gasoline. When buying gasoline, stock up with such a calculation to use for 30 days, fuel should be fresh.