DIY Electric trimmer for grass with your own hands. What homemade dumps can be made from corner grinders?

How to make a trimmer for grass with your own hands from a drill

All owners of personal plots are faced with the problem of mowing grass, which grows literally before our eyes, and during the season it is required to ennoble their site several times. The usual manual spit has been replaced by benzotrimers and electrimmers for a long time. But the price of them does not decrease and is quite noticeable for many owners of cottages and private houses. People’s craftsmen still found a way out of this situation and learned to make trimmers for grass with their own hands literally from improvised means, using benzo- and power tools not intended for these purposes.

Most often, a homemade electric trimmer for grass is made on the basis of a conventional corner grinding grinder, which is available to every home master. This tool is almost perfect for remaking into a trimmer for grass. It has a larger power than store machines and more than a minute. In addition, the standard nut used in the corner grinding for fixing the disks already has holes through which it is easy to insert a fishing line for a trimmer (cord).

So, there are many options from which to make a bar (holding). The simplest is the longer a wooden holder than for a shovel. To the end of it, an angular grinder is attached at the right angle with a conventional tape. The fishing line for the trimmer is inserted into 2 holes of the nut, after which it is twisted. Thus, in a few minutes you get a trimmer for grass, which can be mowed without problems.

For the safety of the operation of a home.made apparatus, you can improve it by making a protective casing (how to do this, will be considered later).

For advanced masters with a welding machine, you can advise a more advanced design to fix the angular grinder and protective casing. It is made from an aluminum tube (serves as a holder) and a metal square profile. Looking at the picture below, you can understand the principle of manufacturing the holder.

The corner grinder is fixed on the holder with bolts inserted into the holes that are designed to attach the handle to the device.

The following photo shows how this design looks below.

Next, the “native” casing of the corner grinder is removed, and instead of the disk, either a fishing line for a trimmer or a metal disk knife is installed.

By the way, you can fasten the holes for fastening the handle (bar) itself, when you want to make a simple trimmer for grass, which is easily assembled and is also easily versed if you need to use the corner grinding for its intended purpose.

To make it more convenient to hold a trimmer for grass in his hands during work, and it did not rotate around the axis of the bar, you can attach a side hand made of a bent pipe to it.

Possible variations of a home.made trimmer for grass

In the factory trimmer, 1.5 mm fishing line for a trimmer is used as a cutting element. Is it possible to apply it in a home.made device? Yes, only for its installation you will need an additional mount. In addition, it is worth taking into account that the fishing line for the trimmer will constantly need to be lengthened or changed.

The saw disc. the circular, in turn, is perfectly attached to the standard shaft and does not need to be replaced. There will be no need to even sharpen its need. When it hits the stone, a very sharp sound is immediately heard. If the disk is immediately assigned to the side, then nothing will happen.

Option two. replace the disk with a metal wire. Alas, and she will not justify herself. Corner grinder gives about 11 thousand revolutions per minute. When dressing the wire, strong vibration immediately begins, the handle of the trap simply jumps out of the hands. In addition, this whole process is accompanied by a terrible noise.

The benefits of such a trimmer for grass are obvious. However, for the doubters, another argument: the corner grinder remains absolutely functional, and at any time it can be removed and used for its intended purpose. Two in one, as they say.

What is a mower for

The lawn mower replaced the traditional braid for grass. Today, everywhere you can see the work of mowers everywhere and everywhere. They are mechanical, with an electric motor and gasoline. All well.groomed lawns in parks, in stadiums, and residential buildings are processed with such tools.

Using the lawn mower has several advantages:

• She cuts the grass at the same height over the entire area of ​​the site;
• The lawn cuts down quickly and easily;
• When using a grass collector, rakes are not needed for the selection of mowed grass;
• The lawn on the site can be used as a background for some landscape elements;
• Cowled lawn. a great place to relax the whole family with guests.

Such devices with a lithium-ion or lead battery are very convenient in areas with obstacles: flower beds, various buildings, with installed furniture, with bushes. A battery mower is the best option when you need to mow grass on a area devoid of electric supply. Battery charge is enough for work for 30 minutes. During this time, you can mow about 300 square meters of grass.

Basils with gasoline engines are quite powerful apparatus with high performance. They are used in large areas. Differ in complete autonomy and convenient handling. Along with these qualities, they have negative features:

Hand machines work without engines. Knives begin to rotate themselves when moving a mower. But it requires a lot of human efforts to work. The mechanical mower has some advantages:

Electric mowers are very popular among consumers. They have quite high performance and low cost. Their disadvantage is the length of the cable. Its standard length is 60 m. They are usually used in areas of 10-12 acres. The optimal size of the processed site is 8 acres. If the device is equipped with a drive on wheels, then front.wheel drive copies are much more maneuverable than rear.wheel drive.

DIY haymaking

You can buy a lawn mower, or you can make it yourself. How to make a lawn mower with your own hands? For work, the master will need:

Image 2. For a haircut of a small lawn, you can make a lawn mower from an old washing machine.

• drill for drilling holes;
• a hammer;
• screwdrivers;
• Passatigi;
• hacksaw for working with metal;
• locksmith grip;
• sharpened.

The electric product usually consists of:

To install the engine, a special platform with wheels is used. Knives are installed at the bottom. Some models have a grass collector. The engine transfers its rotation to the shaft on which the knives are planted. The power of the unit can be 0.75. 2 kW. The width of the mowing is usually small, it is 30-45 cm.

The case is best done from aluminum. It turns out light and durable. Metal wheels with a tread. more reliable.

Before starting work on the manufacture of a mower, it is necessary to choose parts. For the frame, an all-metal sheet is selected 2-3 mm thick. It is cut out in a certain form, a hole for installing the engine is drilled in the center.

Image 3. Drawing of knives for the lawn mower.

The basis of the lawn mower can be a chassis from a baby stroller, from an old wheelbarrow. 50 cm width is enough. The engine is used by any asynchronous. The number of revolutions is about 3000.

As an engine, you can use a conventional electric drill. Such a working unit will fully cope with the lawn of a small area. Some craftsmen install the engine from the Soviet washing machine (image).

Knives are made of instrumental steel. The width of the workpiece is 20-50 mm, thickness 2-3 mm. They should be strong, but not fragile. A knife canvas is suitable for the manufacture of knives, designed for sawing wood. The cutting edges bend down slightly. This is somewhat protecting the engine shaft from winding grass on it (image).

The wheels are selected in diameter so that the knives take a position of 5-6 cm from the ground. They can be taken from 2 to 4 pieces.

After the selection of all parts, you can start assembling the structure. The frame is taken from an old baby stroller or welded from a 25×25 mm corner. Aluminum platform is attached to it. Knives are cut and sharpened. A hole with a diameter of 8-10 mm is drilled in the middle. With this hole, they are put on the engine shaft.

The electric motor is installed in its place on the platform. His shaft goes into the hole. The knife is attached to the shaft from below. The electric cable joins.

Different models of lawn mowers are collected in this way. Homemade units have a number of advantages:

When working with a mower, you need to comply with some safety rules. All wires should be well isolated. The device must be equipped with a protective casing.

When performing work nearby, there should not be other people and pets. You can not mow moist grass, so you can work only during the day. Constantly need to check the condition of the main parts.

DIY Friendship mower

The working shaft moves due to the craft transmission from the saw itself to the pulleys, to which the fishing line for the trimmer is attached. This design will serve for many years unnecessarily of additional maintenance. This option is more complicated in manufacture, as it has a two.wheeled frame and two rotary cutters. On the other hand, it has its advantages, since its performance is much higher than that of ordinary self.propelled devices.

Self.manufacture of the device and ingenuity, of course, the reason to be proud of your invention. But we must also remember that collective design solutions will always be better displayed on the quality and safety of the structure.

The advantages of homemade devices include:

• saving funds on the purchase of the necessary materials at a low price instead of a new tool;
• the use of a tool that does not have a product, but has not lost its functionality;
• Independent assembly allows you to always improve the invention, as well as to know its design perfectly.

In such a model, the height is not regulated, and due to this, the lawn does not always manage to cut off exactly. And also a minus is the lack of a container for collecting grass, which automatically increases human labor costs. A heavy assembly tool can sometimes ruin the lawn with its weight. This is an objective factor in favor of choosing a factory model instead of independent assembly.

To get high.quality and durable equipment for mowing grass, you need to strictly adhere to the correct algorithm of actions. The standard self.propelled lawn mower is collected in the following order:

• First, the pipe must be inserted into the gutter of the used bearing, as well as motionlessly place the gear inside;
• By the end that remained free, it is necessary to weld 2-centimeter “ears”. After that, the holes need to be drilled in the “ears”;
• For the manufacture of knives, you need to cut the canvas from the hacksaw. It must be cut into several equal parts;
• To fix the knives on the rotary disk or on the prepared bar, you must use rivets. The diameter of the finished design should be about 40 cm;
• After that, you will need to cook a hard frame using a metal corner for this. The frame should be strengthened by steel spacers that will not let it break when the lawn mower is hit on a tree or bench. The dimensions of the support frame must correspond to the dimensions of the chainsaw;
• Inside the skeleton, you need to install a rectangular stand. a mowing housing will be based on it. To make the equipment as balanced as possible, all its connections should be placed strictly at right angles and be tough enough;
• To the finished frame, it is necessary to weld the mounts that will help to fix the wheels, handles and individual metal hooks required for the support of the entire device;
• After that, you need to install the wheels;
• Next, you need to fix the chainsaw, removing the saw headset from it in advance. The tool should be motionless on the frame;
• Then, along the contour of the finished case, you need to cut the steel plate. It must be installed over a chainsaw. The result is a reliable metal casing that protects the saw from moisture and grass;
• At the next stage, to the leading star of the chainsaw, the manufacturer should fasten a pipe with cutting knives of a home.made mowing;
• At the end, it remains to install the handles on which you need to take out the levers and buttons to control the lawn mower.

Making the frame

The frame is made from thick plywood or metal. So that the home.made design is safe and less often needs to be repaired, a protective casing is also needed. The best material for its manufacture will be metal.

The size of this part depends on the length of the knife. But, rarely, when the maximum width is made more than 60 cm. Taking a sheet of metal with a thickness of at least 3 mm, cut a square 50×50 cm (or 60x60cm). The hole for the engine must be made in the center (at the intersection of the diagonals of the square).

The flange engine is mounted from below directly to a home.made frame. To reliably fix the motor with ears, additional mounts will be required, which must be welded to the frame.

The metal frame is more reliable and less susceptible to deformations. But, if there is no metal, you can make it from plywood or boards.

The casing is necessary to prevent the crash of weeds and other garbage. The simplest option would be to use a canine as it as it. If you want to make a casing, you can more aesthetic appearance. High casing will be protection for the electrical mechanism.

Self.manufacture of a trimmer for grass from a drill

One of the easiest ways to make a trimmer for grass is to use an old drill or battery electric screwdriver. The second option is slightly worse, since the battery will significantly limit the working hours. But you can increase autonomy by installing a 12 volt car battery in the design. However, given the large size of this nutrition element, you will either have to take care of long wires, or make the whole device wheeled.

So, in order to make a trimmer for grass from a drill, a strong holder, directly power tools and a home.made knife will be required. The process includes several stages.

• Production of the holder. It can be wooden or metal, but many recommend finding an aluminum pipe with light and weight and at the same time high reliability. In addition, it can be easily drilled if the trimmer for the grass in the future will not understand, and the drill will be fixed tightly.
• Fastening to the drill holder (or electric screwdriver). This is carried out through metal brackets or clamps. Some home craftsmen claim that you can fix the tool with ordinary tape, but there are several nuances here. Firstly, it’s not safe. Secondly, it is impossible to give tape between the holder and the working mechanism, which means that it will be extremely inconvenient to use such an assembly.
• Fastening to the cable holder. This is done with tape so that the wire does not hang and does not interfere during operation.
• Another important point in the design is a knife. It can be made of steel. For ease of use, it should be thin. And if the assembly of a trimmer for the grass is made of an electric screwdriver on the battery, then the material should be selected light. this will allow to “squeeze” the maximum operating time from the battery. Further, the selected metal strip, sharpened on both sides, is drilled in the middle and tightly fixed from both edges on the bolt, which in turn will be fixed in the drill cartridge.
• For safety, when working, you should take care of a protective casing, which can be made of plastic. A great option is to use the upper part from a plastic bottle with a volume of 19 liters.

Principles of using electric engines

An electric engine can be single.phase, operating from a network with a voltage of 220 V, or three.phase. When connecting the engine, you must follow all safety rules when working with electrical appliances. The protection of the RCD for a single.phase electric motor should be made, and the capacitors corresponding to the capacity have a powerful three.phase in the diagram.

For an electric lawn mower with your own hands, you can use a powerful low-speed drill at a speed of 1,500-3000 rpm. It is necessary to choose the right ratio of the power and width of the smok, so as not to overload the motor. Installed on the platform, the battery or network drill will create the necessary torque, and the grass will be quarreled. In the process, do not forget to observe recreation intervals, to cool the brush engine. Such a tool will help to clean the adjacent territory, easily folds and does not require a lot of space for storage. The platform on which the engine is installed should be narrow so that you can process the fastener. Stability depends on the location of the center of gravity. The lower it is, the less the moment of tipping over the platform. How to cost a lawn mower with your own hands, look

When creating the tool yourself, remember that it is a means of increased danger. It is necessary to include in the circuit the blocking button that works when jaming or breakdown of the knife. You can not work with electric mowers in wet weather, in the morning dew.

complex models with an engine with a capacity of 1.5 to 6 kW are installed on a specially executed sole. The engine is better to use asynchronous, it is less noisy. The chassis represents metal rubberized wheels with a wide tread so that the grass is less crumpled. Bearing nodes in bushings on the axis are more reliable than plastic liners.

You can perform a deck and a knife using an old frying pan and an instrumental steel plate. The design, when knives are attached to the mandrel, is more effective

It is important to follow the proportions and profile of the sharpened edges, using drawings in the photo of the lawn mower with your own hands

Of great importance for the performance of the high.speed node is proper centering. A small beating can create strong vibration, destroy the compounds, create a backlash due to the production of seats.

In the household, mechanisms and details that have served their term always accumulate. Something can be found on household landfills of old things. Unfortunately, such cemeteries surround any residential area. Wheels from a baby stroller are perfect, a handle from it will also come in handy. Voits an example of a do.mowl with your own hands from the washing machine of the Soviet era. They were then made of strong metal. Engines from these machines are the best in parameters and power for use in the lawn mower.

A high.quality steel case will serve as a protective skirt and guide when throwing grass to the side. In addition to the motor, two pulleys and a belt for transmitting rotation from the engine to the knives drive are used. The motor is fixed on the platform and connected to one phase.

Such a home.made mowing woman works on the house territory, as it is tied to the network with a supply cord. You can use a special coil wire with an extension cord by selecting a section corresponding to the engine power. Such a device is available at least 40 meters long and must provide mobility.

Using a chainsaw engine in a lawn mower does not require additional protection. It is already completed in a dust.proof performance. Air filters clog less often.

How to make a mobile lawn mower with your own hands? The tool made on the basis of the drill depends on the battery capacity and requires recharging on the network. In the absence of electricity, it remains to build a lawn mower based on an internal combustion engine. All small technique, which is seasoned with gasoline or combustible mixture, can become a donor for a home.made machine for cutting the lawn.

From a chainsaw

For the chainsaws, many different nozzles have already been invented, expanding the capabilities of this unit, for example, a cultivator, a drill, a boat motor, as well as a spit nozzle for grass. How she looks, you can watch in this video. If you want to make a trimmer for the grass from the chainsaw, then the maximum that you can do is the lawn mower on wheels, since the unit engine is quite heavy, and apply the above.described trimmers manufacturing (with the lower drive).

Therefore, the cart is first made. It can be welded from a 25×25 mm corner. The size of the frame should be 500×600 mm. The wheels are attached in the angle of the frame.

Further, from the unit it is necessary to unscrew the “helm” and the tire. The handle of the cart can be made from water pipes. The “helm” is fastened to her. It is also necessary to lengthen the fuel hose and gas cable.

When installing the cart handle, you should pay attention to ensuring that it does not overlap the tank (starter).

The gasoline engine is installed (screwed through the holes to fix the tire) on the frame so that the gearbox is rotated 90 degrees and the shaft is below.

Now it remains only to fix the cutting tool on the unit shaft. This is done as follows.

• To the “star” of the device, it is necessary to weld a small piece of pipe, 80 mm long and 50 mm diameter. It is better to cut the pipe on a lathe so that the ends are perfectly even.
• Next, find the pipe with a slightly larger diameter. equal to 58 mm. It must also be cut off 80 mm long. Thus, you will receive a telescopic shaft, which is connected using 2 bolts (M6) located opposite each other. The bolts must have counter. The following shows the scheme according to which the head of the trimmer for the grass is made, which serves to fix the cutting tool.

In telescopic pipes you need to make several holes so that the height of the knives above the ground can be adjusted.

The knife is better to make such a design as in the next figure.

Due to the fact that the disk is fixed with movable knives on rivets, when meeting with a stone or dry branch, they will simply bounce. This will protect the shaft and gearbox from damage that may occur when jaming the tool.

Rivets that hold the knives on the disk must be metallic.

Disk diameter (made of 4 mm sheet steel) should be 180 mm. The knives are made of strips of 30 mm wide and 120 mm long, cut out with a corner grinder from a knife shell on a wooden.

Corner grinder grain

If you are engaged in households and you have to cook animal feed all the time, then a homemade grain.bell made of corner grinding grinds, made by your own hands, will be very welcome.

To make a home.made grain.circuit, the following materials will be required:

• Thin tin for the manufacture of a case with a sieve and a grain receiver;
• Plywood plywood for cutting the base for a grain.circuit;
• Steel for making knives or their ready.made options from vegetable progress.

So, let’s start with the most interesting, with the manufacture of the basis. To do this, you will have to take a rectangular piece of plywood, in size 50 by 40 cm. Closer to the edge, it will be necessary to attach an angular grinder and circle its contours for cutting the holes in the faner. Subsequently, the angular grinder will be fixed directly in the hole through metal bolts and a plate.

Then you can take on the manufacture of the case in which grain grinding will occur. Make it best out of thin tin. After the manufacture of the housing, in the bottom you should be inhabited by many holes, with a diameter of not more than 3 mm. Through the holes, as in a sieve, a grain.begwood crushed by knives will pass, grain.

Knives, as it was said above, is best made from a strip of thin steel. For the convenience of fastening, the knife can be fixed directly with a nut from the corner grinder, making a hole in it previously suitable under the diameter of the rod. Now it remains to make a receiver for filling grain in a grain.circuit. You can also make it from tin or from a plastic bottle of 5 liters with a cut bottom.

Homemade protective casing

If a homemade mower is made by you, then you will definitely need a protective casing. He will protect your eyes, body and legs from injury with small pebbles and fragments of knives if they break.

A trimmer for grass can be made from a sheet of aluminum or thin tin.

• At first, in the corner of the square of the metal it is necessary to drill the hole of the desired diameter (depending on the type of drive of your unit) using the crown.
• Then you need to make markings for fasteners. As a basis to which homemade protection will be screwed, you can use a standard casing from corner grinding, if you make a trimmer for grass from it.
• Close the workpiece with a clamp and using a tape measure and a pencil, draw the first circle with a radius of about 270 mm. The center of the circumference will serve as the corner angle. It is impossible to give accurate recommendations about the radius, since it will depend on the diameter of the cutting tool that you will use with the unit. Therefore, first decide which knives you will use, and which fishing line will be optimal.
• Next, conduct a second arc (this will be a bend), slightly retreating from the first. In this case, 5 centimeters. Thus, you measured the height of the future shield. In general, the height of the casing is recommended to be done so that when you put it exactly on the ground, the cutting tool does not reach it about 2 cm.
• After marking the second line, it is necessary to cut the workpiece along it, using a hacksaw for metal or an electrician with a file on metal.
• In addition, it is necessary to make radial cuts (to the first arc) and bend the resulting parts with pliers at an angle of 90 °.
• Further, the shield is attached to the protective casing of the corner grinding, the cutting tool is installed, and the unit is ready to work.

In this way, you can make and install a protective casing and on a trimmer purchased in a store if the shield has split for some reason. The shields in the factory devices are made of plastic and often break if you unsuccessfully hit the head of the trimmer for grass on the ground for lengthening the fishing line.

Making electric cos from a washing machine with your own hands

You can also make an electric car on the basis of an engine from a washing machine. It is asynchronous and turns on by means of the button. The wagon can be made from a return button, for example, from measuring devices. Completely compact size of the motor allows you not to make a large cart, as in the previous version.

On a note! The convenience of using such an engine is that it already has a pulley, and the replacement of the piston with more convenient is not needed here. The belt and the second pulley are located right there. in the washing room.

Knives are made by analogy with descriptions above. But there is one important point. so that the engine from the washing machine is prepared for work as a trimmer for grass, you should not forget to make a protective casing for it. He will protect the drive from the grass. But at the same time, it is necessary to take care of the protection against overheating, that is, the casing should be larger in size and have holes for ventilation. For this purpose, an old bucket or plastic bottle of large capacity is suitable. Do not forget to take breaks. such a motor is not calculated for long.term work.

We make a motorized car

From a conventional bicycle, home masters managed to make a more practical vehicle. they rearranged the engine from motorcycles on it. At the same time, options are practically implemented both with a gasoline engine and with an electric motor.

Required tools, materials and details

The electric engine for a bicycle is powered by a battery, which, depending on the power of the unit (it is taken 0.35-1.2 kW), is enough from 30 minutes to 2 hours.

Two- or four-stroke gasoline engines are used to remake a bicycle. The last option consumes less fuel and is not so noisy during operation. The recommended power is from 1.5 liters.With., And the best option 2 l.With. When using a motor with a smaller parameter, the motorcycle bike will barely go or will not be able to move at all at all.

Rotational movement from an engine operating on gasoline to the bicycle wheel occurs using a belt or chain transmission. Because of this, you will need to make the following details:

• Metal suspension in the form of a frame with sides to fix the motor on the bicycle frame;
• The driven and leading pulleys or stars for attaching to the engine and wheel, respectively.

The use of chain transmission from the point of view of practicality is preferable than a belt, because the belt wears out faster, especially if it regularly gets wet.

For the implementation of the project, you will need to choose a suitable gearbox. After installing the pulleys, choose a belt of the desired size.

The dimensions of the frame under the engine depend on its dimensions. The suspension itself to the frame of the mototalosyped is fixed:

The last option in strength is the best if the welder is good. If the design of a bicycle frame allows, then the suspension is replaced with a clamp with which the engine is fixed. This fastening option is more practical. The method of fixing the motor should be comfortable, reliable and allowed to quickly remove it if necessary.

The performance of all the work with your own hands in the presence of an old, functioning trimmer for grass, a bicycle and a small set of tools will require the executor of time, as well as patience.

Construction assembly sequence

To independently collect a bicycle with a engine working on gasoline, you will need, in addition to the materials and details considered, also:

• controller;
• cable for adjusting the operation of the motor;
• fuse;
• exhaust pipe welded by welding;
• sleeve;
• washers;
• bolts;
• chain tensioner.

The assembly of a mototalosip is carried out according to this algorithm:

• put on the rear bicycle wheel asterisk;
• The engine is fixed with a clamp (with an asterisk on the shaft) on the frame behind the seat or on the trunk, if the design features of the bicycle allows, otherwise you will need to choose another convenient place for this purpose;
• put on the chain on the stars of the wheel and motor;
• attach the tensioner;
• regulate the stretch of the chain;
• fix the handle of gas;
• stretch the cable to the engine;
• fix the fuel tank;
• Mount the carburetor.

In order to personal safety during the operation of a motorcycle, a braking system is modernized, the wheel tires are changed to non.slip products, check the integrity and stability in the movement of the created structure. After the entire structure is assembled, it is tested, having previously examined the shortcomings.

It is recommended to give preference to disc brakes.

Checking in work

We start the motor. Adjusting idle revolutions we set the output voltage at the output of the generator in the region of 220 V.

We connect various loads. Voltage subsidence is not significant.

I can’t say by the power of the installation itself, but I think it is quite possible to take 200-300 watts from it.

trimmer for grass from corner grinder

Summer comes and the grass has already grown noticeably until it is critical, but you should already think about how to cut it. I will show how to make a simple trimmer from a corner grinder for grass to mow grass. precisely, it will be a special device in which the angular grinder will be installed. After mowing, it can be removed again and used as intended. There is no point in buying a ready-made trimmer for grass, if you need it only 1-2 times a season.

How to make a trimmer for grass from a corner grinder with your own hands

The first thing to do is the bracket for girth of the corner grinder. To do this, take a steel plate and bend on both sides on the body. I took the plate already bent on one side initially. Now I can only bent the second edge.

In the case of the tool on both sides there are holes with thread. A handle is screwed into these holes to cut both on the left side and on the right, the handle is made of a transit. That’s just for these holes and the trimmer bracket will be fixed for the grass.On the sides of the bracket, it is necessary to drill holes so that they coincide with holes on the sides of the tool. We notice a marker.

Now the barbell. It will be made from a steel pipe. At the end of the pipe we will make a beard so that the handle is attached at an angle. Mark the fishing line for the trimmer cut.

Now it’s time to install the corner grinder itself in the seat. To do this, we unscrew the protective circle.

So that the trimmer for the grass does not touch the ground and be at a certain distance, the wheels will be attached to it. They can be taken from an old and unnecessary baby stroller or any other cart. In extreme cases, make it yourself from wooden round.I had the wheels with the brackets.

We attach a wheel with a bracket and fix it all with a bolt. We tighten well with the key. We do the same procedure from the opposite side.

It remains to make a cutting. To do this, take segments of a steel cable or a specialized nylon wire for trimmers. We stretch the cross on the clip through the clamping nut, through the key holes.

Before finishing, I would like to say that the corner grinder is not intended for such work. And if you want to repeat this homemade, then take the fully responsibility and use everything at your own peril and risk.With mowing grass, be very careful, steel cable rotating at high speeds is very dangerous. All manipulations for the installation or dismantling of the cutting part do only when the fork is pulled out of the outlet.And so the device is necessary and it may well get used to cut the lawn in front of the house.