Drill attachment for cutting wood saw

Milling

With special tips, the drill can even be used for milling wood parts.

Reception of cutters (cutters) are of various types:

  • Cylindrical;
  • End;
  • End;
  • Disk;
  • Shaped, etc.

The choice of cutter depends on the type of operation being performed. For example, if it is necessary to make grooves in the part, use disc cutters for wood for a drill. For complex cuts, it is best to use a router bit.

It should also be noted that cutters differ in the shape of the teeth, which are:

  • Pointed;
  • Backed up.

Refined teeth are good because they can be re-sharpened if necessary, while sharp-pointed teeth are not restored.

Basic rules for working with a drill and attachments

In the process of using an electric drill, like any other power tools, the operating instructions and safety rules must be strictly observed.

  • Before processing, the workpiece must be securely clamped.
  • The nozzle must be securely fixed in the chuck. If there is a backlash, it is forbidden to work with it.
  • When working with a drill, it must be held with two hands, especially for powerful models.
  • The pressure should not be excessive.
  • It is forbidden to turn on the reverse mode until the complete stop of the drill.
  • When working, you must use personal protective equipment. gloves and glasses.
  • After completing the work, do not touch the drill or other tip for some time, as you may get burned.

Note! Do not try to make a nozzle or adapter yourself. The fact is that electric drills operate at high speeds, as a result of which a poor-quality or unbalanced nozzle can cause injury.

Compliance with these simple injuries will make the work safe, which is the most important thing when performing any construction operations.

Drill attachment for wood cutting saw

The main purpose of a drill when working with wood is to drill holes. However, this tool is much more powerful than most people think. To expand its functionality, special wood nozzles are used, which, in fact, this article is devoted to.

Next, we will look at what drill bits for woodworking exist, and for what purposes they are used.

Making large holes

To make holes of large diameter, several types of nozzles are used:

  • Pen drills. due to their flat cutting edge and special sharpening, they allow you to make holes in wood, chipboard, plywood and OSB up to 60 mm in diameter. It should be noted that pen drills are not only for wood, but also for metal.
  • Drill bit for wood. allows you to drill holes in wood with a diameter of up to 100 mm.
  • Forstner drill. has a centering point. With this drill, you can make blind holes, for example, for mounting hinges in the manufacture of furniture.

Advice! When making a hole in chipboard and other similar materials, do not press down hard on the drill, as this can lead to chips and cracks.

I must say that there are special devices on sale that allow you to change the drilling angle. Their purpose is to provide ease of drilling in hard-to-reach places.

Cylindrical router bit for wood drill

Drill bits. accessories

We have already written how an electric drill can be turned into a lathe and drilling machine (insert links), and also adapted it to work as a circular saw.

We present to you several devices to further expand its capabilities.

1.Drilling and milling attachment for electric drill.

This device allows you to obtain high-precision holes of large diameters in various, incl. round, workpieces, perform some milling work, which is ensured by high accuracy of mutual positioning of the cutting tool and workpiece.

Universal sharpener.

This device, like no other, justifies its considerable cost by its high versatility. With its use, sharpening all cutting tools available in your household: from knives and axes to drills and cutting edges of any tool, will turn into a simple event.

Holder with clamp.

Such a universal holder allows you to fix your electric drill in any convenient place and use it with various tools and as a sharpening machine, and grinding and polishing, and milling, and even a mini-turner. The main thing is that you have both hands free.

Screwing in self-tapping screws

Self-tapping attachment is the simplest type of tip. However, it should be noted that it can only be used with those types of drills that have the option to reduce the speed.

These products, as a rule, are sold in sets, in which there are heads of several diameters. This allows you to work with self-tapping screws and screws of different sizes.

These are, perhaps, all the most common types of attachments. I must say that there are also less popular tips, for example, flexible cable drills that allow you to make holes in hard-to-reach places, as well as angle bits that allow you to turn a drill into an angle grinder. True, on sale they can be found much less often.

Saw attachment for electric screwdriver: Top 10 attachments for power tools from AliExpress (scissors, chainsaw, pump, extractors and others)

The main task of an electric drill is to drill holes. A wide range of tools are available for this. In addition to simple drills, this group of attachments uses:

The most expensive bit is the wide hole drill. This drill is only suitable for professional tools.

  • The crown-shaped nozzle has a complex shape, is used for punching a hole in fibreboard, chipboard and wood, as well as in metal and concrete. Its wide, hard cutting edge has a characteristic cutter profile, capable of selecting a hole up to 100 mm in diameter. In the middle of the nozzle there is a drill that defines the central hole and guides the direction of the nozzle.
  • Wood drills provide wide holes up to 60 mm in diameter for fitting furniture fittings in boards and wood. The center point and wide side stays precisely limit the depth and set the position of the notch. Pen drills are flat.
  • The Forstner drill has wide side cutting edges and a centering point. Such a drill makes it possible to make blind holes of medium and small diameters in wood. With the help of a point, such a drill makes holes for mounting furniture hinges with exact dimensions and location.
READ  Cultivator Attachment For Trimmer. Is it worth buying?

Such drills can be attributed to professional equipment, since in everyday life they are used very rarely, only for work on the manufacture of furniture, professional carpenters for assembling doors.

Carbide drills and common household types can come in handy at any time. Therefore, it is better to have a universal set of drills with different diameters. Concrete walls cannot be drilled without a drill bit.

Design features

Features of the device and the use of the most commonly used attachments.

For polishing

The considered type of attachments in many ways resembles a grinding one, differing from it in the specificity of the filler used. The material of the latter is soft (as a rule, it is foam rubber or thin dense felt), due to which such devices are successfully used for fine processing of wooden surfaces.

Hilda Reciprocating Saw Drill Attachment

Multifunctional drills

By design

To date, there are many nozzles for wood processing, which differ markedly in shape and other features of their structure. The most demanded of them can be found below.

Making large holes

To make holes of large diameter, several types of nozzles are used:

  • Pen drills. due to their flat cutting edge and special sharpening, they allow you to make holes in wood, chipboard, plywood and OSB up to 60 mm in diameter. It should be noted that pen drills are not only for wood, but also for metal.
  • Drill bit for wood. allows you to drill holes in wood with a diameter of up to 100 mm.
  • Forstner drill. has a centering point. With this drill, you can make blind holes, for example, for mounting hinges in the manufacture of furniture.

Advice! When making a hole in chipboard and other similar materials, do not press down hard on the drill, as this can lead to chips and cracks.

I must say that there are special devices on sale that allow you to change the drilling angle. Their purpose is to provide ease of drilling in hard-to-reach places.

Cylindrical router bit for wood drill

Cup

These tools are well suited for removing old paint and other procedures that involve roughing wood surfaces. The attachments in question are a bowl with a tightly fixed brush made of wire or abrasive nylon. To choose the right option, the master should take into account the degree of surface treatment that needs to be achieved.

Operating tips

When processing wood with nozzles using a drill, the performer must adhere to the following requirements.

  • The device used must be securely fastened in the chuck. In the presence of any, even minimal backlash, work cannot be started.
  • One of the key conditions, taking into account which allows you to avoid injuries and other troubles, is the mandatory fixation of the workpiece being processed.
  • While working, it is advisable to hold the drill with both hands, which is especially important for powerful equipment.
  • If the performer wants to turn on the reverse, he needs to wait until the instrument in use has completely stopped.
  • When processing wood, special attention should be paid to pressure. It should be quite strong, but not excessive.

At the end of the work, you must wait for the nozzle to cool for several minutes. You should not touch it during the specified time period (you can burn your fingers).

In addition, the performer should not experience discomfort from small particles filling the space of the room when working with wood. Inhaling them is strongly discouraged, which justifies the use of a respirator. an inexpensive and highly effective personal protective equipment. Also, do not neglect the glasses, which negate the likelihood of foreign objects getting into the eyes. This advice is especially relevant in situations where processing is done with wire brushes.

In conclusion, we can confidently state that it is worth using drill bits for working with wood for everyone who appreciates their strength and time. Such products have many obvious advantages with a minimum number of disadvantages, and therefore are suitable for the vast majority of performers.

For one of the woodworking attachments, see the following video.

The main purpose of a drill when working with wood is to drill holes. However, this tool is much more powerful than most people think. To expand its functionality, special wood nozzles are used, which, in fact, this article is devoted to.

Next, we will look at what drill bits for woodworking exist, and for what purposes they are used.

Drill bits: types of devices and features of their use

Drill attachments, as well as attachments for this power tool, endow it with new functions and the ability to successfully solve various technological problems. Attachments for equipping a drill allow you to use it not only for drilling, but also as a power saw, milling cutter, small lathe or even a pump for pumping liquids. Modern manufacturers offer a wide variety of attachments and attachments that make the drill truly multifunctional.

Drill-based modeller sawing machine

Of course, nozzles and other devices will not make a device out of a drill comparable in performance and processing accuracy with specialized equipment, but it can be used quite successfully to solve simple technological problems with their help. It is very convenient to use elements of additional equipment of a drill to solve construction and repair tasks, as well as many other issues related to housing in good condition.

Varieties of devices for additional equipment of the drill

The most common is such a drill attachment as a stop, which allows you to easily and quickly drill holes to the required depth. The design of the simplest stop device includes an auxiliary handle and the stop itself, on the surface of which a metric scale is applied.

A parallel stop has a more complex design and, accordingly, greater functionality, with which it is possible to control not only the depth of the hole being made, but also the position of its axis relative to the surface of the workpiece or structure. Attachments of this type are produced both for tools used in construction and repair, and for wood drills.

READ  Hammer Drill Makita Hr2470x15 Difference From Hr2470

Making blind holes for furniture hinges with a forstner drill is much easier using a drill stand

Parallel stops, intended for use with tools for construction and repair work, are mounted on powerful drills, with which they drill holes in concrete and brick building structures. This type of attachment consists of a stop with a scale and an auxiliary handle for a drill. In some models of the parallel stops there is a built-in suction for removing processing waste, which is connected to the vacuum cleaner.

This milling bit is used to cut grooves, slots or profiles

A fairly large category among the additional equipment of a hand-held electric tool is made up of nozzles and attachments for a drill, with which you can perform drilling at an angle. Such a device for drilling holes works where it is not possible to use a conventional drill. The working head, depending on the model of this equipment, can be located at different angles (up to 90 °) in relation to the axis of rotation of the main drill chuck. The most popular and demanded are the attachments for drilling at an angle of 90 degrees.

Tilting drill stand for easy drilling of oblique holes

On the modern market, there are widely presented devices for drilling holes, which allow not only to limit the depth of the holes created and control the verticality of their axis, but also to use the drill as a small milling cutter. Such devices are especially popular among home craftsmen who independently make furniture.

When using various working attachments on a drill for wood processing, many technological operations can be performed (in particular, lateral drilling of holes in products of a round or more complex configuration, requiring the use of special inserts). On some models of such devices, special suction units are installed, connected to a vacuum cleaner, with the help of which dust and small chips are removed from the processing area. It should be borne in mind that even such functional devices do not allow making a full-fledged manual milling cutter out of a drill, which has the same operational capabilities, but provides higher accuracy and quality of the processing performed.

No one will dispute the fact that it is much more convenient to use a drilling machine to form holes, not a drill (and the processing accuracy with stationary equipment is higher). Meanwhile, a simple drilling machine can be made from a hand-held power tool, for which a guide attachment for a drill is used. Most modern models of such a device are equipped with a vise for fixing the part during processing, as well as a frame along which such a vise can move freely. The power tool itself is placed in a special drill holder (basket), which is a universal clamping device and can be used for almost any model of drilling tool. Such a device, on the rack of which an accurate metric scale is applied, is a very useful acquisition for any home craftsman, as it allows you to make holes with less labor and higher accuracy.

A drill stand paired with a vise adds the ability to clamp and even grind workpieces

Attachments to a drill are very popular, allowing you to use it as a wood lathe. Such equipment is fixed on the desktop, and the drill itself acts as its driving mechanism. To install a drill in the design of such an attachment, a special stand and a fastening mechanism are used.

drill, attachment, cutting, wood

Such attachments are available in various designs, with a different set of cutting tools and accessories, make it easy to realize the dream of many home craftsmen to have their own lathe at their disposal. Of course, a lathe powered by a conventional electric drill cannot be compared with specialized equipment either in terms of the resource of work, or in the accuracy and productivity of the processing performed. If you use such an attachment in an intensive mode, the electric drill will not withstand significant and prolonged loads and will eventually fail. That is why, in order not to be left without a drill, such an attachment should be used to perform simple and not too long turning work on wood.

The most popular attachments for a drill include attachments that allow you to turn such a tool into an electric grinder or emery. Even inexperienced craftsmen do not have any difficulties with their installation. Such attachments can be used not only for sharpening knives and circular saw blades, but also for restoring the geometric parameters of drills, turning tools, chisels and plane knives. Thus, using such devices for a sharpening drill, you can not only solve with their help many household issues, but save on contacting qualified specialists. Even those who have no experience in this area can successfully use such emery, including for sharpening cutting tools.

Emery or grinding discs can be used as a working attachment of this machine.

Additional equipment for a drill is necessary not only for home craftsmen, but also for professional furniture makers. Such equipment, in particular, includes a milling attachment, with the help of which grooves are made in joinery and furniture elements to create corner joints. When using this attachment, there is no need to fix the workpieces in the clamping device. It provides high processing accuracy, and to create a groove of the required width and depth, special adjusting elements are provided in its equipment.

A flexible drive or an angle adapter is available for efficient use of drill-driven tools even in the most difficult-to-reach places.

The flexible drive and the angle drill bit are fixed in the drill chuck at one end. Their second end is equipped with a clamping device, in which drilling, milling, abrasive and any other tool with a shank of a suitable diameter can be clamped. When choosing between two such devices, it should be borne in mind that a flexible drive has more capabilities in terms of handling hard-to-reach places than an angle drill bit. The bending angle of such a drive is not limited to 90 °, it can be any.

The question of whether it is possible to use an electric drill as a pump drive for pumping liquids is not without meaning. In order to practically solve such a problem, you do not have to come up with various homemade products, not rack your brains over making a reliable mount for a drill on the body of a typical pump and over which adapter to use. All these issues have already been thought out by specialists and implemented in the design of the attachment pump.

READ  How To Make A Hole In Metal Without A Drill

Despite its small size, the pump nozzle can provide quite a decent pressure

Such a drill pump, although not designed for long-term and intensive use, is able to effectively solve many problems. In particular, it can successfully pump small volumes of both viscous liquids (such as oil or paint) and ordinary water. To change the speed of pumping out a liquid medium, it is enough to change the number of revolutions made by the drill chuck. Since pump bodies for drills are usually made of plastic, they do not have a long service life, but this disadvantage is compensated for by the low cost of such devices.

Furniture jig ensures accurate centering and perpendicularity of drill holes

Electric drills are often used in combination with special templates, which not only increase the accuracy of drilling and further assembly, but also significantly speed up the processing process. Templates for professionals are made of metal and retain their geometric parameters for a long time. For home use, you can purchase an inexpensive plastic template, which, although not as durable as their metal counterpart, provides high accuracy of the processing performed.

Next Level Drill Saw Attachment

Drilling templates are divided into household and professional

The meaning of drilling templates is that their design includes standard sizes and the location of holes most often made in elements of furniture structures. So, there are templates designed for drilling holes for fixing furniture hinges, inserting locks and installing furniture ties. In such templates, not only the distance between the holes to be made is precisely maintained, but also the distance at which such holes should be located from the edge of the workpiece.

Types of drill bits

The attachments used with drills are also used to expand the functionality of the latter. This includes, in particular, a range of drill bits for cutting sheet metal. These metal cutting drill bits can work like a nibbler or nibbler. Even when used with a conventional drill or electric screwdriver, they are highly effective. For example, this cutting drill bit can handle metal sheets up to 1.5 mm thick, mesh made of metal, and thick plastic.

Attachment for cutting metals and plastics

In most cases, it is better to use a drill attachment for cutting metal, and not a manual or electric jigsaw. This is explained by the fact that the jigsaw, like many other devices with which you can cut sheet metal, contribute to intense heating of the processing area. This can lead to burnout of the protective coating applied to the surface of the sheet. Some of the more popular drill bits used for cutting sheet metal include devices called the Cricket and Steel Beaver, as well as attachments that look like metal scissors but are powered by a drill or electric screwdriver.

Among home craftsmen, as well as those who are professionally engaged in car body repair, grinding and polishing attachments for drills are very popular. The working body with which such grinding attachments are equipped can be a drum with sandpaper glued to its surface, as well as a felt or felt disc.

To use the drill as a polishing machine, simply attach the tool to the table using the holder

The material through which the nozzle for a grinding drill will contact the surface to be treated is selected depending on the nature of the technological task. So, a grinding tool, with which a coarser processing is performed, is often made of an abrasive material of the appropriate grain size, and felt or felt is glued to the polishing tool. A brush attachment is also used as a polishing tool, installed in the drill chuck using its shank.

The drill attachment for car polishing can be used not only after body repairs have been completed, but also in cases where the owner of the vehicle wants to give it a pristine shining look. If you want to save on the purchase of grinding attachments for a drill, you can make such a device yourself. For this, a homemade wooden drum is suitable, in the central part of which it is necessary to securely fix the shank. With the help of this structural element, such a device will be fixed in the drill chuck. Grinding and polishing with a drill using a similar drum can be done with materials such as sandpaper, felt and felt.

Nylon brush head helps clean the motor

Power tool attachments, used to clean products made of various materials, work on a similar principle. So, for cleaning metal products, metal and abrasive nozzles, as well as a brush nozzle, can be used. The brush is made of metal wire and allows you to effectively clean the surface of the product from dirt, rust and remnants of the old paint and varnish coating. The brush itself, which such nozzles are equipped with, can be located on the end or side of the device (it all depends on the tasks to be solved). Similar nozzles differ in the material from which the brush is made. Such materials, in particular, can be polymer fibers or metal wires.

Using the mortar mixing attachment, a conventional drill can be turned into an efficient construction mixer. The mixing of construction and finishing mixtures, which is carried out using a drill mixer attachment, is carried out not only quickly, but also efficiently. It is only important not to exceed the volume of the mixed mixture, so as not to reduce the efficiency of using such a device.

Using the drill as a mixer, the load should be calculated in proportion to the power of the tool.

Speaking about what can be done with the help of additional equipment used in the kit with a hand-held electric tool, we should also mention the riveter attachment for the drill. The tool on which such a nozzle is installed must have a reverse function, and the rivet fixed with such a device can only be of the pull type.

If you want to save on the purchase of serial devices, you can make many drill bits yourself. In such cases, it is better to use the advice of those who have already dealt with the practical solution of such issues and decided to share their experience via the Internet.