Drilling at 90 degrees fixture

Drill guides

The simplest do-it-yourself drill guide

Considering this option of the nozzle, one should take into account the fact that no money will be required to implement the idea. But at the same time, there will be no particular difficulties in making a guide for a drill. But at the same time, the created device will be able to serve for a rather short time.

It is important to consider that it should not be considered as a complete complement to the tool. In the event that it is necessary to create a hole at a considerable distance from the workshop and there are no other alternative devices, then it is with the help of such a nozzle that the task can be most effectively solved. In addition, it will bring significant benefits to those home craftsmen who do not often use a drill.

Drilling work is one of the most frequently performed during the manufacture of various structures. over, a home craftsman most often solves this problem with a household drill. However, for the most part, the hole created does not differ in exact dimensions. And this can create certain difficulties when using it for its intended purpose.

You can get out of this difficult situation with the help of drill guides, which you can make yourself. This idea seems quite attractive for the reason that any owner can make such a nozzle, given that any available means can be used for this. However, having realized all the attractiveness of the guide, it must be remembered that it will not be able to become a full-fledged device for a drilling tool, so you should resort to using this nozzle only in emergency situations. Otherwise, the drill guide will fail pretty soon.

Manufacturing process

First, you need to perform certain manipulations with the drilling tool. To do this, twist the nut and the fixing drill from the drill. After that, you need to mark its diameter on the plastic bottle as close as possible to the neck. Then transfer the circle corresponding to this diameter using a felt-tip pen. You should end up with a full circle.

This template, which must be cut out later, should also be noted on the bottle cap, and care should be taken to ensure that its width is sufficient for this.

The next step is to trim the bottle or jar. The choice of the trimmed structure should be approached very carefully, since this will further affect the depth of the holes created with the help of the guide.

Special attention should be paid to work safety. To do this, it is recommended to sand the edges of the can to make them even and smooth.

The holes that were previously applied to the bottle and its cap should be cut exactly along the intended mowing line using a clerical knife. Processing should be carried out with the edges of the slices, which must be thoroughly sanded. Then they take the lid and place it with the front side in the jar, acting on it with physical force to ensure the most snug fit. It is in this area that it is glued.

The strongest possible connection can be achieved if, after applying the glue, a strong compression is ensured, which must be maintained until the adhesive dries. Given that doing this work manually is fraught with certain difficulties, it will be useful to fasten several thin elastic bands on top, thanks to which the required pressure can be maintained.

After waiting for the glue to dry, the drill attachment can be used for its intended purpose. A drill is pushed into it, after which, using a plastic nut, it is fixed on the tool and the hole is drilled. Although it does not provide a choice of depth, this problem can be solved by making several of these tips and using the most suitable one as needed.

Sliding Carriage Guides (Household Option)

They represent a support frame on which vertical posts are fixed. Along the guides, the carriage moves freely (but without distortions), in which the drill body is fixed. The simplest designs cannot change the angle of inclination of the racks.

As a rule, fixtures are equipped with a 45 ° cut for fixing cylindrical workpieces (eg pipes). The support is equipped with a handle for holding, has a non-slip coating. With its help, you can start drilling with high precision and under visual control, and maintain a given angle.

The application can be limited only by the workpiece area: if it is less than the dimensions of the support platform, use is impossible.

Due to the fact that the support is fixed by the hands of the master, the placement of the guide can be anything: even on the ceiling.

  • affordable price;
  • high positioning accuracy.
  • works only with certain drill diameters, and with the only possible shank.

Top 4 Drill Guides

At first glance, the mechanics of drilling holes seem quite simple. The drill rotates, you apply force along the tool axis, and go deeper into the workpiece. At the same time, various force vectors act on the drill, on which the accuracy and quality of drilling directly depend.

  • Rotation around its axis, and even with increased friction at the edge, tends to lead the drill to the side. This is especially noticeable at the beginning of work, when the tip is not yet buried in the workpiece. If the surface has the opposite radius of curvature (for example, a pipe), it is almost impossible to start drilling: the tip will slide off all the time. When working with metals, you can apply punching: creating a small depression at the desired point. However, this method is not always possible. And if you work with plastic or ceramics, it is not acceptable at all.
  • Already in the process of deepening into the material (we are talking about deep holes, where the length is much greater than the diameter), the parasitic force vector tends to divert the drill from the rectilinear movement along the axis. This is due to uneven friction against the side walls of the hole.
  • It is extremely difficult to maintain an exact drilling angle relative to the surface of the workpiece, especially in deep holes. It is almost impossible to do such work manually, especially if the value is set to a value other than 90 °.
  • If you are drilling large holes (for example, a recess for a switch in a wall), getting started and keeping the direction is even more difficult.

Yes, there are drilling machines. But they only allow you to work with small diameter workpieces. In addition, bulky equipment takes up space in the apartment. In addition, work on the wall with the machine is not performed.

To make it easier to use the drill, manufacturers offer special guides. These are devices that allow you to maintain the correct positioning of the tool relative to the workpiece, both before starting work and in the process of deepening into the material. The main advantage of these devices is mobility and affordability (relative to drilling machines).

Make a Anywhere Right-Angle Drill Guide | Tricks of the Trade

Attachment for drilling with a drill at an angle of 90 degrees

Important nuances

Having decided to create such a device with your own hands, you need to take into account such important points:

  • moving elements must be tightened extremely tightly. For effective work, a do-it-yourself drill attachment, it should be able to select a suitable overhang and stroke size. over, if the guide post has a rather significant weight, then this only simplifies the process of creating holes.
  • In some cases, the stand can be used in combination with a vice, thanks to which you can fix the workpiece. In this case, such a structure can easily be converted into a full-fledged drilling machine. over, it is not necessary to purchase such a vice in order to expand the functionality of the equipment. If you have enough experience, you can also make them yourself.
READ  How Drilling Is Different From Reaming

Types of drill bits

The attachments used with drills are also used to expand the functionality of the latter. This includes, in particular, a range of drill bits for cutting sheet metal. These metal cutting drill bits can work like a nibbler or nibbler. Even when used with a conventional drill or screwdriver, they are highly effective. For example, this cutting drill attachment can handle metal sheets up to 1.5 mm thick, mesh made of metal, and thick plastic.

Attachment for cutting metals and plastics

In most cases, it is better to use a drill attachment for cutting metal, and not a manual or electric jigsaw. This is explained by the fact that the jigsaw, like many other devices with which you can cut sheet metal, contribute to intense heating of the processing zone. This can lead to burnout of the protective coating applied to the surface of the sheet. Some of the more popular drill bits used for cutting sheet metal include devices called the Cricket and Steel Beaver, as well as attachments that look like metal scissors but are powered by a drill or screwdriver.

Among home craftsmen, as well as those who are professionally engaged in car body repair, grinding and polishing attachments for drills are very popular. The working body with which such grinding attachments are equipped can be a drum with sandpaper glued to its surface, as well as a felt or felt disc.

To use the drill as a polishing machine, simply attach the tool to the table using the holder

The material through which the nozzle for a grinding drill will contact the surface to be treated is selected depending on the nature of the technological task. So, a grinding tool, with which a coarser processing is performed, is often made of an abrasive material of the corresponding grain size, and felt or felt is glued to the polishing tool. A brush attachment is also used as a polishing tool, installed in the drill chuck using its shank.

The drill attachment for car polishing can be used not only after body repairs have been completed, but also in cases where the owner of the vehicle wants to give it a pristine shining look. If you want to save on the purchase of grinding attachments for a drill, you can make such a device yourself. For this, a homemade wooden drum is suitable, in the central part of which it is necessary to securely fix the shank. With the help of this structural element, such a device will be fixed in the drill chuck. Grinding and polishing with a drill using a similar drum can be done with materials such as sandpaper, felt and felt.

Nylon brush head helps clean the motor

Power tool attachments, used to clean products made of various materials, work on a similar principle. So, for cleaning metal products, metal and abrasive nozzles, as well as a brush nozzle, can be used. The brush is made of metal wire and allows you to effectively clean the surface of the product from dirt, rust and remnants of the old paint and varnish coating. The brush itself, with which such nozzles are equipped, can be located on the end or side of the device (it all depends on the tasks to be solved). Similar nozzles differ in the material from which the brush is made. Such materials, in particular, can be polymer fibers or metal wires.

Using the mortar mixing attachment, a conventional drill can be turned into an efficient construction mixer. The mixing of construction and finishing mixtures, which is carried out using a drill mixer attachment, is carried out not only quickly, but also efficiently. It is only important not to exceed the volume of the mixed mixture, so as not to reduce the efficiency of using such a device.

Using the drill as a mixer, the load should be calculated in proportion to the power of the tool.

Speaking about what can be done with the help of additional equipment used in a set with a hand-held electric tool, we should also mention the riveter attachment for the drill. The tool on which such a nozzle is installed must have a reverse function, and the rivet fixed with such a device can only be of the pull type.

If you want to save on the purchase of serial devices, you can make many drill bits yourself. In such cases, it is better to use the advice of those who have already dealt with the practical solution of such issues and decided to share their experience via the Internet.

The design of the jig is determined by the parameters of the part for which it is made. If the holes in the part are located on one straight strip (along the X axis), then the jig will be a strip, corner or channel of a certain length with holes drilled in a row. If the holes are not placed on the same strip (with an offset along the X and Y axes), then the jig must be made from a single piece of sheet metal, otherwise welded from an iron profile.

Make a blank for the conductor.

Cut a workpiece from a sheet of metal or weld it from a profile metal (angle, strip, channel). If you have a part for which a jig is being made, use it as a template in the process of making a blank. If there is no part, mark the hole pattern on a sheet of paper or tin and use this sheet for the template.

Precision swivel fixture

for drilling at an angle of up to 65 °, bowstrings for balusters, railings, for the production of wooden stairs,

Highest precision thanks to inserted level and precision ground guide. Drill bushings included 3 bushings for drills 7mm. 8mm. 10mm.12mm

Simple and clear alignment with the built-in level. The stubborn frame should be set according to the angle of inclination of the bowstring on the device for drilling stairs relative to the marking strip on the stringer there are adjusting washers, tighten. and you’re done!

Corner frame smoothly adjustable in the spectrum up to ± 65 °.

Precise drilling depth thanks to infinitely adjustable drilling depth guide.

Compact and comfortable for almost all baluster and handrail systems.

Perfectly suited for the production of wooden ladders specifically at one place of installation.

Greatly simplifies the work of the wizard.

The quality and speed of work is what this device gives.

We will send to the cities of the Russian Federation.

Transferring the angle of inclination to the balusters.

We attach the stand with the previously set angle to the baluster and mark this angle.

  • Drilling aunt
  • Drilling the handrail
  • Drilling balusters for studs.
  • Drilling center adjustment with shims
  • Marking the corner on the baluster. (This angle on the jig is transferred to the destination of the cut on the baluster)
  • The use of feather drills of various sizes

all in one fixture in one place for the assembly of the ladder

If you have made furniture at home at least once, then you understand that most of the parts are joined end-to-end using dowels. In order to accurately and correctly make holes for dowels, you just need to take a jig to drill holes.

READ  How to Make a Fixture for an Angle Grinder

In huge furniture enterprises, special machines are used to drill such holes. Some craftsmen independently, in other words, at small enterprises, first drill holes in the end face of one part, then insert special taps like a cone here.

Then the second part is applied, the places on its surface, the places for the holes are marked, after which they are drilled. Although using this method it is possible to make holes, alas, it is doubtful to repeat the drawing exactly and achieve alignment for you, and in addition, the myth is a very leisurely and labor-intensive method.

If you have a drawing of furniture, you want to repeat it very accurately and ensure high-quality fastening of all furniture parts, and there is no way to purchase expensive equipment, the way out is a device for drilling.

The jig is a device that looks like a bar with holes and sleeves. To make holes, the jig is attached to the part using clamps, after which a drill is inserted into the sleeve and a hole is made. For one and the other parts that are connected to each other, the same conductor is used, then our client remains true and coaxial.

The main advantages that the indicated device has:

  • drilling precision
  • they turn out perpendicular, because a sleeve is used
  • simplicity and speed of work.

The conductor is used not only in the furniture industry, it is also used in mechanical engineering, you will like it more if it is large or costly. They are also used for drilling mixed-type holes, they all allow you to accurately repeat the drawing and comply with the dimensions indicated by him.

And it is possible that a conductor has been used in the light industry or in construction, in this case they use costly models made of wood, sheet metal or plexiglass.

It is impossible to drill a pipe or a cylindrical workpiece, because the drill constantly slips off. If you use this device, then the process is greatly simplified and accelerated and it is not difficult to do the work.

It is especially vital to use this device if you need to drill a hole in a workpiece with a cylindrical shape and a small diameter.

Also, such a device allows you to make perpendicular holes, which are very difficult to make without its introduction.

There are various types of such devices, they will be used both for drilling and for milling, as well as for turning, cutting, assembly of parts. There are costly, swivel, tilting and sliding models.

Self-centering jig for drilling holes. self-centering jig for drilling holes

Now it remains to cut the thread and connect the two parts into one structure. When using it, it is possible to do work without being afraid just for the fact that you protrude beyond the edge of the sheet.

It is not difficult to make such a device, alas, it makes the work of furniture assemblers or those people who make it much easier. If you have no desire to engage in the creation of this device without the help of others, buy it ready-made.

If you need a conductor to carry out work on the manufacture of furniture on your own, then the simplest one will do and its price will be insignificant. Professional equipment has a rather high price.

Under any circumstances, you will acquire a conductor differently, you will make it without the help of others, this device helps to connect furniture parts easier and faster or to make repairs.

See a selection on the manufacture and use of homemade conductors:

There are two ways in the video, the second is at least original

Drilling at a 90 degree angle

Drill attachments, as well as attachments for this power tool, endow it with new functions and the ability to successfully solve various technological problems. Attachments for equipping a drill allow you to use it not only for drilling, but also as a power saw, milling cutter, small lathe or even a pump for pumping liquids. Modern manufacturers offer a wide variety of attachments and attachments that make the drill truly multifunctional.

Drill-based modeller sawing machine

Of course, nozzles and other devices will not make a device out of a drill comparable in productivity and processing accuracy with specialized equipment, but it can be used quite successfully to solve simple technological problems with their help. It is very convenient to use elements of additional equipment of a drill to solve construction and repair problems, as well as many other issues related to housing in good condition.

Varieties of devices for additional equipment of the drill

The most common is such a drill attachment as a stop, which allows you to easily and quickly drill holes to the required depth. The design of the simplest stop device includes an auxiliary handle and the stop itself, on the surface of which a metric scale is applied.

A parallel stop has a more complex design and, accordingly, greater functionality, with which it is possible to control not only the depth of the hole being made, but also the position of its axis relative to the surface of the workpiece or structure. Attachments of this type are produced both for tools used in construction and repair, and for wood drills.

Cutting blind holes for furniture hinges with a forstner drill is much easier using a drill stand

Parallel stops, intended for use with tools for construction and repair work, are mounted on powerful drills, with which they drill holes in concrete and brick building structures. This type of attachment consists of a stop with a scale and an auxiliary handle for a drill. In some models of parallel stops there is a built-in suction for removing processing waste, which is connected to a vacuum cleaner.

This milling bit is used to cut grooves, slots or profiles

A fairly large category among the elements of additional equipment for hand-held electric tools is made up of nozzles and attachments for drills, with which you can perform drilling at an angle. Such a device for drilling holes works where it is not possible to use a conventional drill. The working head, depending on the model of this equipment, can be located at different angles (up to 90 °) in relation to the axis of rotation of the main drill chuck. The most popular and demanded are the attachments for drilling at an angle of 90 degrees.

Tilting drill stand for easy drilling of oblique holes

On the modern market, there are widely presented devices for drilling holes, which allow not only to limit the depth of the holes created and control the verticality of their axis, but also to use the drill as a small milling cutter. Such devices are especially popular among home craftsmen who independently make furniture.

When using various working attachments on a drill for wood processing, many technological operations can be performed (in particular, lateral drilling of holes in products of a round or more complex configuration, requiring the use of special inserts). On some models of such devices, special suction units are installed, connected to a vacuum cleaner, with the help of which dust and small chips are removed from the processing area. It should be borne in mind that even such functional devices do not allow making a full-fledged manual milling cutter out of a drill, which has the same operational capabilities, but provides higher accuracy and quality of the processing performed.

Drill dust extractors

No one will dispute the fact that it is much more convenient to use a drilling machine to form holes, not a drill (and the processing accuracy with stationary equipment is higher). Meanwhile, a simple drilling machine can be made from a hand-held power tool, for which a guide attachment for a drill is used. Most modern models of such a device are equipped with a vise for fixing the part during processing, as well as a frame along which such a vise can move freely. The power tool itself is placed in a special drill holder (basket), which is a universal clamping device and can be used for almost any model of drilling tool. Such a device, on the rack of which an accurate metric scale is applied, is a very useful acquisition for any home craftsman, as it allows you to make holes with less labor and higher accuracy.

drilling, degrees, fixture

A drill stand paired with a vise adds the ability to clamp and even grind workpieces

READ  Diamond Drilling Rig Husqvarna Dms 240

Attachments to the drill are very popular, allowing you to use it as a wood lathe. Such equipment is fixed on the desktop, and the drill itself acts as its driving mechanism. To install a drill in the design of such an attachment, a special stand and a fastening mechanism are used.

drilling, degrees, fixture

Homemade lathe from a drill

Such attachments are available in various designs, with a different set of cutting tools and accessories, make it easy to realize the dream of many home craftsmen to have their own lathe at their disposal. Of course, a lathe powered by a conventional electric drill cannot be compared with specialized equipment either in terms of the resource of work, or in the accuracy and productivity of the processing performed. If you use such an attachment in an intensive mode, the electric drill will not withstand significant and prolonged loads and will eventually fail. That is why, in order not to be left without a drill, such an attachment should be used to perform simple and not too long turning work on wood.

The most popular attachments for a drill include attachments that allow you to turn such a tool into an electric grinder or emery. With their installation, there are no difficulties even for inexperienced craftsmen. Such attachments can be used not only for sharpening knives and circular saw blades, but also for restoring the geometric parameters of drills, turning tools, chisels and plane knives. Thus, using such devices for a sharpening drill, you can not only solve with their help many household issues, but save on contacting qualified specialists. Even those who have no experience in this area can successfully use such emery, including for sharpening cutting tools.

Emery or grinding discs can be used as a working attachment of this machine.

Additional equipment for a drill is necessary not only for home craftsmen, but also for professional furniture makers. Such equipment, in particular, includes a milling attachment, with the help of which grooves are made in joinery and furniture elements to create corner joints. When using such an attachment, there is no need to fix the workpieces in the clamping device. It provides high processing accuracy, and to create a groove of the required width and depth, special adjusting elements are provided in its equipment.

A flexible drive or an angle adapter is available for efficient use of drill-driven tools even in the most difficult-to-reach places.

Angled drill bit

The flexible drive and the angle drill bit are fixed in the drill chuck at one end. Their second end is equipped with a clamping device in which drilling, milling, abrasive and any other tool with a shank of a suitable diameter can be clamped. When choosing between two such devices, it should be borne in mind that a flexible drive has more capabilities in terms of handling hard-to-reach places than an angle drill bit. The bending angle of such a drive is not limited to 90 °, it can be any.

Examples of using angle attachments

The question of whether it is possible to use an electric drill as a pump drive for pumping liquids is not without meaning. In order to practically solve such a problem, you do not have to come up with various homemade products, not rack your brains over making a reliable mount for a drill on the body of a typical pump and over which adapter to use. All these issues have already been thought out by specialists and implemented in the design of the attachment pump.

Despite its small size, the pump nozzle can provide quite a decent pressure

Such a drill pump, although not designed for long-term and intensive use, is able to effectively solve many problems. In particular, it can successfully pump small volumes of both viscous liquids (such as oil or paint) and ordinary water. To change the pumping speed of a liquid medium, it is enough to change the number of revolutions made by the drill chuck. Since pump bodies for drills are usually made of plastic, they do not have a long service life, but this disadvantage is compensated for by the low cost of such devices.

Furniture jig ensures accurate centering and perpendicularity of drill holes

Electric drills are often used in combination with special templates, which not only increase the accuracy of drilling and further assembly, but also significantly speed up the processing process. Templates for professionals are made of metal and retain their geometric parameters for a long time. For home use, you can purchase an inexpensive plastic template, which, although not as durable as their metal counterpart, provides high accuracy of the processing performed.

Drilling templates are divided into household and professional

The meaning of drilling templates is that their design includes the sizes and locations of the holes most often made in the elements of furniture structures. So, there are templates designed for drilling holes for fixing furniture hinges, inserting locks and installing furniture ties. In such templates, not only the distance between the holes being made is precisely maintained, but also the distance at which such holes should be located from the edge of the workpiece.

The costly jig is applied to the workpiece, there are variations of lying freely on the other, fastened with clamps, this method is usually used to drill holes.

A rotary device is used if you have set a goal to work with cylindrical workpieces. They have a vertical, horizontal and pivot axis. For small production, you need to use universal fixtures that are easy to readjust. A tilting jig is used if you need to drill in different planes.

Sliding conductors do not reinforce to the machine, but are exposed separately under the cross section. They are the least productive and are usually used if the work is performed on a single-spindle machine and you need to make several different diameters on the part, for this purpose, the guide bushings are made on folding strips.

Such a device will also be made in artisanal conditions, for this purpose you need to find a drawing suitable for you to do everything according to it. At work it is necessary:

  • drill
  • Angle Grinder
  • apparatus
  • locksmith tools.

To make the most common fixture, you need to take a square section with a size of 10x10mm. After that, a piece is cut off to the length and cleaned with sandpaper. Now you need to make a layout for the template holes.

It is impossible for the center to be closer to the edge than 8mm, this is equal to half the thickness of the chipboard sheet. Available standards predict that the center-to-center is 32 mm.

When the centers are marked, holes 5mm in diameter are made here. For the production of the stop, an iron plate with a width of 4.5 mm is used, its thickness should be 1 mm. It bends at an angle of 90 degrees and, together with a piece of prepared fittings, after fixing them in a clamp, make a place for the thread.

This tool is a must have for every furniture maker! Jig for minifix and dowels