Gasoline Does Not Receive Husqvarna Chainsaw Carburetor

Common malfunctions of the Husqvarna 137 chainsaw

A chainsaw is irreplaceable at home by the owner. Myth is a tool in demand and popularity, as it helps to facilitate the work of a forester or gardener. Husqvarna is a popular company that has been developing high-quality tools for a long time, as well as equipment for the upcoming garden work.

often, people buy a Husqvarna 137 chainsaw for use in personal enterprises, in the household or in forestry. The presented products have proven themselves in large-scale industrial construction.

Manufacturer offers its customers a wide and varied selection of products, however, specialization is the development of chainsaws. Husqvarna 137 saw is a more successful and high-quality model. It is comfortable during use, has a low weight and is economical. However, it is notable for its sufficient power to cope with large volumes of work.

Probable malfunctions of the Husqvarna 137 chainsaw

At human may encounter some breakdowns of the Husqvarna 137 chainsaw, which you take away. Now there is a huge selection of workshops where specialists are engaged in the repair and maintenance of equipment. However, a considerable amount will have to be paid for this work.

Husqvarna 137 Saw Repair in artisanal conditions without appeal to specialists. When the breakdown is insignificant, then it makes no sense to go to the workshop and waste your time. There is a list of more common problems that the owner of such equipment may encounter. Therefore, it is purposeful to find out everything about them, so that they are always fully armed.

Background to the failure of the accounting ignition system

Read:

If Husqvarna saw finished working, then basically you need to check the spark plug for proper operation. This must be done very carefully using a specially designed hook. First, the wires are disconnected from the body of the floor, and it looks like a candle.

  1. If the candle is dry, then it says that the fuel does not enter the main cylinder. Under such circumstances, the malfunction is not in the candle, because it can be safely rolled back.
  2. When fuel spray is found on this part, the main problem is the carburetor. This suggests that it was incorrectly adjusted for a different start rule.

Why doesn’t gas come from the chainsaw tank

carburetor? The reason is one, the formation of a vacuum in the tank. Obstacle solution, pull out the snow-white plug, clean.

Why doesn’t gasoline enter the carburetor, Husgvarna 137? (Solution of the obstacle).

Not starts up chainsaw cause. Chainsaw MAX 3216 not gives signs of life. The cause of the malfunction is found.

So that to remove such a problem in a chainsaw, it is recommended to carefully wipe the candle, shut off the fuel supply and start the starter. This procedure is performed to perfectly ventilate the combustion chamber and remove fuel surplus. After which the candle is mounted in its original place and run the Husqvarna 137 chainsaw.

When the candle is covered with heavy soot, then it says the use of bad oil. In order for the chainsaw to last for a long time, only tested and certified lubricants should be taken. When users incorrectly calculate the ratio of oil and gasoline, they also set inaccurate adjustment of the carburetor.

In such circumstances it is recommended that you direct your attention to the presence of sparks at startup. For this purpose, an ignition cable is installed on your candle, a cylinder and a nut are connected. Now you can start the chainsaw starter and then a spark occurs. If it is indifferently absent, then you should replace the old candle with a new one. There are cases when users come to find a faulty high-voltage drive or eliminate a connection failure.

Fuel supply system

Read:

At improper operation of a chainsaw Husqvarna fuel does not fall into the master cylinder. This malfunction appears for several reasons:

  • saw blade fuel filter contamination;
  • viscous chain oil;
  • clogging of a special hole;
  • dirty air filter.
READ  Husqvarna 142 Starts And Stalls

To clean the chainsaw fuel hose carefully check the flow of fuel. Specialists advise every three months to change an old hose and take the latest part. If the air hose is contaminated inside, it allows accounting (software), and specifically, air does not enter the carburetor. In most cases, this leads to disruption of the processes of the motor. The filter is cleaned with ordinary water, however, this function must be done very carefully.

The part is painstakingly dried and installed in its original place.. Husqvarna 137 chainsaw is sold together with an annotation, which describes in detail the technique of changing and cleaning hoses. If you do not adhere to the rules, then there is an option to aggravate the situation.

A more common cause is a clogged channel or a violation of the integrity of the carburetor membrane. Here it is recommended to replace the part and clean the channels. After a while, the chainsaw works without interruption.

Muffler

If at low revs the saw engine runs smoothly, and when they increase, it stalls, then the problem is connected with the muffler. This indicates a defective spark arrestor. Most likely, he was clogged with combustion waste. To perform cleaning, the silencer is first removed and disassembled. Further, the user painstakingly removes the resulting deposits with a detergent.

After this fact, experts advise to dry the part with a hairdryer. At the end of all manipulations, the muffler is installed in its original place.

Saw Husqvarna 137 is lightweight, because a huge selection of defects there is an option to remove at home. For this purpose, you should closely examine the breakdown and learn all about the annotation. There are rules for parsing and installing parts. Saw Husqvarna 137 is characterized by its own reliability and sufficient power. She copes with even the most complex tasks and does a large amount of work. Therefore, the presented chainsaw is widely used in large-scale industrial enterprises.

The Husqvarna 137 small-sized chainsaw belongs to the category of amateur equipment. The product is lightweight, convenient and compact. It is popular not only in households, but also among professional lumberjacks. The unit is in demand among builders, rescuers and foresters, as it is convenient for them to work in hard-to-reach places and in cramped conditions.

Gasoline Does Not Receive Husqvarna Chainsaw Carburetor

Scope of application

In industry, construction, and the private sector, there is often a need for fast and high-quality wood cutting. It is not always possible to do this with a hand or electric tool. A universal self-contained fixture is the Husqvarna 137 chainsaw, powered by an internal combustion engine.

The product is used for such purposes:

  • roll of trees, their overgrowth and bushes;
  • cleaning trunks from branches;
  • logging;
  • cutting timber, boards and logs into blanks;
  • the choice of grooves in lumber;
  • fitting wooden products to specified sizes;
  • wood carving, crafts and sculptures;
  • clearing rubble in the forest;
  • dismantling of buildings made of wood.

Video: Gasoline Does Not Receive Husqvarna Chainsaw Carburetor


Device

The product has a classic design for products of its class. Manufacturers embodied in it simplicity and sufficiency.

Husqvarna 137 chainsaw device:

  • housing;
  • handles for holding;
  • mechanical starter;
  • internal combustion engine;
  • chain brake lever;
  • tanks for oil and fuel mixture;
  • throttle, gas and air damper control levers;
  • ignition button;
  • muffler;
  • sprocket tire;
  • saw chain.

The fuel supply system and clutch are mounted inside the housing.

Carburetor

The unit is responsible for supplying a mixture of fuel and oil to the cylinder. The carburetor is equipped with a diaphragm and a special needle valve. These parts control the pressure in the system. Dosing of the supplied air is carried out by two dampers located on the diffuser chamber. One regulates the volume of air while pressing the gas lever, and the second controls the flow during the cold start of the tool. At this point, the damper partially closes, and the enriched mixture enters the engine.

READ  Gasoline Dilution Chainsaw Oil

After mixing gasoline and oil, fuel is fed into the cylinder through a nozzle with a check valve. This is an important part to prevent exhaust from entering the diffuser.

The chain for the Husqvarna 137 chainsaw is different:

  • high strength
  • hardness;
  • low vibration;
  • wear resistance.

Drill links are equipped with chamfers providing high-quality cutting of hardwood.

Saw chain characteristic:

  • link thickness. 1.3 mm;
  • chain pitch. 3/8 inch;
  • tire length. 40 cm;
  • the number of links is 56.

The product implements the technology "chisel with a chamfer." The tension is set with a screwdriver by turning the adjusting screw. Sharpening is carried out by a round file with a diameter of 4 mm. An alternative is to use a grinder or the services of specialists from a service center.

Specifications

The parameters of the chainsaw compares favorably with those of similar products of a light class.

Tool Specifications:

  • type. gasoline, carburetor;
  • engine power. 1.64 kW (2.2 hp);
  • fuel tank volume. 0.41 l;
  • oil tank volume. 0.20 l;
  • engine displacement. 36.3 cm³;
  • the number of links in the chain. 55;
  • dimensions. 250x420x260 mm;
  • noise level at full speed. 107 dB;
  • weight without dressing. 4.9 kg;
  • tire length. 40 cm;

Included with the chainsaw are replacement spark plugs and branded chain oil.

Advantages and disadvantages

Husqvarna 137 chainsaw, like any product, has pros and cons.

The advantages of the tool are as follows:

  • high quality workmanship and fitting parts to each other;
  • the use of wear-resistant materials, long life;
  • convenient design that provides balance during work;
  • light weight of the product, the use of durable polymer plastic;
  • safety provided by several safety devices;
  • high performance;
  • affordable cost of tools and supplies.

The product has practically no drawbacks. It is necessary to use high-quality fuels and lubricants, observe the proportions of the preparation of the fuel mixture. If this is not done, then the tool fails.

Repair Features

Some malfunctions of the Husqvarna 137 chainsaw can be fixed on their own. A service center is contacted only in cases where the parts are mechanically damaged or wear to a critical condition.

To carry out minor repairs or replace worn parts, use the repair tools that come with the product.

Work is carried out according to the table of possible breakdowns that occur during operation.

So, if the saw does not start, the cause must be sought in the fuel supply system. When the tool stalls during operation, the repair of the Husqvarna 137 chainsaw may be limited to cleaning the muffler from soot.

How to adjust carburetor

The carburettor is initially adjusted at the manufacturing plant for standard fuel parameters based on summer operation. Changing the settings occurs due to vibration during the sawing process or due to the use of low-quality fuel mixture. Chainsaw carburetor adjustment is performed in cases when the engine is unstable, does not start, or stalls under load.

To make a carburetor repair yourself, you need to have the following tools:

  • screwdriver;
  • wrench;
  • thin wire.

Product performance recovery is carried out in the following ways:

  1. Wire clogging of clogged channels.
  2. Adjusting the tension of the cable for the gas flap actuator.
  3. Removing a defective membrane and installing a new part.
  4. Compaction of joints.
  5. Gasket replacement.

After eliminating the malfunction, the instrument is fine-tuned by rotating the bolts L (crankshaft speed), T (idle speed) and N (fuel supply volume).

How to disassemble and assemble a chainsaw

Dismantling the product is carried out with:

  • seasonal service;
  • repair;
  • planned replacement of worn parts and mechanisms.

Dismantle the product in the following sequence:

  1. Remove the handles.
  2. Loosen housing bolts, remove covers from it.
  3. Remove the tire, remove the chain saw sprocket.
  4. Disconnect starter.
  5. Unscrew flywheel.
  6. Remove the clutch and oil pump drive.
  7. Disconnect muffler carburetor and ignition coil.
  8. Disassemble the engine.

Assembly of the unit is carried out in the reverse order.

Owner reviews and prices

Alexey, 41 years old, Ukhta

READ  Which Chainsaw Is Better Husqvarna Or Stihl Video

Vladimir, 55 years old, Pskov

Great technique for personal use. Inexpensive, simple and convenient. The high performance of the chainsaw is noteworthy. it cuts quickly, knots pass easily. To avoid problems, you need to refuel with high-quality gasoline and oil.

Nikolay, 33 years old, Khabarovsk

An irreplaceable thing for a summer residence. I use for construction, logging and cultivation of trees. The saw is light, reliable, works equally well in winter and summer. I like build quality, ergonomics and reliability. There are no problems with maintenance. the parts are inexpensive.

A chainsaw is an extremely useful tool for gardeners, summer residents, owners of country houses or their own bathhouses. And we do not take into account professional use in forestry, carpentry or in construction.

Saw Husqvarna 137

This saw has gained popularity due to the optimal balance of its characteristics and high quality. This saw can be called ideal for domestic use:

  • It is quite light, only 4.6 kg in an unfilled condition;
  • It has a good power of 1.6 kW, which allows you to solve a variety of problems;
  • Equipped with vibration damping systems and chain brake, which increase the convenience and safety of work.

Husqvarna 137 is a versatile household saw. Thanks to the thoughtful design and high build quality, the saw will last you a long time, even with intensive work.

Major malfunctions

However, like any mechanism, Husqvarna 137 may begin to “act up.” Consider the main malfunctions characteristic of this saw model:

Ignition system.

Since the malfunctions of this system are the most common, the spark plug should first be inspected. If it is completely dry, then it must be installed in place, and look for the cause of the breakdown in another place.

If there are traces of fuel on the candle, then the malfunction is really somewhere nearby.

Wipe off the spark plug, turn off the fuel supply and turn on the starter. This will get rid of excess fuel in the combustion chamber. After that, install the spark plug in place, check the carburetor adjustment in accordance with the instructions, and carry out the start strictly following it.

Another problem is the presence of soot on the candle. Besides the fact that it needs to be cleaned, you also need to reconsider your approach to the oil used. Sludge appears due to poor quality oil, which not only complicates the operation of the ignition system, but also contributes to the root wear of other parts of the saw.

If cleaning the plug and purging the combustion chamber does not help, check the gap between the electrodes and the plug. You can correct it using a new gasket.

In cases where the spark is completely absent even when replacing the spark plug, it is advisable to contact a specialized workshop, since the problem can be caused by a malfunction of the high-voltage cable.

Fuel supply system.

First, check the carburetor adjustment.

If fuel still does not flow into the cylinder, remove the fuel hose and check the fuel supply. A weak jet indicates a problem in the fuel filter. It must be washed in water, dried and put back.

Similarly, check the air filter. Inadequate airflow into the carburetor can cause the engine to stall.

After flushing the filters, inspect the system for foreign particles that may interfere with the flow of fuel.

If all else fails, the cause of the malfunction may be in the carburetor itself, and this is already a complex device, and it’s better to turn to professionals.

Spark arrester.

When the saw dies with increasing speed, it is advisable to check the muffler. A spark arrestor is placed there, which is often clogged with various combustion products. To eliminate the malfunction, the muffler should be well cleaned.

The remaining breakdowns of the chainsaw, as a rule, are more serious and require qualified repair.