Got In The Eye From An Angle Grinder What To Do

A speck in the eye. What to do?
A speck in the eye. What to do? Even the smallest damage to the cornea causes very unpleasant sensations and discomfort. Over, they can lead to complications. Therefore

What to do if a speck gets into the eye?

To begin with, it is worthwhile to understand what actions cannot be performed:

  1. Rub your eyes.
  2. Try to reach the foreign body with your fingers or paper towel.
  3. Twist the eyelids.

In this way, you can only aggravate the situation, bring in an infection or provoke severe damage to the cornea.

Here’s how to remove a speck in your eye:

  1. Examine the cornea carefully in a mirror or ask someone to do it.
  2. If no foreign body is found, first gently pull the upper eyelid down, as if to put it on the lower one. Do the same with the lower eyelid, pulling it up.
  3. If a speck appears in sight, remove it with the tip of a handkerchief, cotton swab, or any clean cloth soaked in water.

In cases where a foreign object could not be found, you can try to rinse the eye. To do this, lie on your side, hold your eyelids with your fingers so as not to blink, and then pour clean water directly onto the cornea.

If none of these methods helped, and the burning sensation or the feeling of cramps only intensifies, you do not need to take any more action yourself. It is necessary to contact the nearest medical center for help.

A speck in the eye. What to do?

Even the smallest damage to the cornea causes very discomfort and discomfort. Over, they can lead to complications. Therefore, it is important to immediately take the necessary actions when a speck gets into the eye. Not everyone knows what to do, because the help provided in time can prevent serious infection.

What to drip if a speck gets in the eye?

As a rule, it is still possible to remove a foreign body in the first 5 minutes after it enters the cornea. To prevent infection and relieve irritation, soothe mucous membranes, it is recommended to drip special drugs.

Here’s what you can wash and anesthetize your eye with if a speck gets in:

  • Vial;
  • Vizin;
  • Natural Tear;
  • Systein;
  • Ophthalmic;
  • Likontin;
  • Oxial;
  • Visomitin;
  • Inox;
  • Vidisik;
  • Oftagel;
  • Hilo-Chest of drawers.
READ  Angle Grinder 125 Mm Which One To Choose

When the discomfort disappears, it is worth dropping an antibacterial solution as a prophylaxis for bacterial infection. The following tools are suitable:

  • Albucid;
  • Chloramphenicol drops;
  • Tobrex;
  • Floxal;
  • Sodium sulfacyl;
  • Normax.

Just 1-2 drops are enough in the damaged eye. After the procedure, it is important to slightly press the lower eyelid against the cornea so that the active substances penetrate into the mucous membranes.

Types of injuries and typical symptoms

The case when chips from a tool enter the eyelid is considered mechanical damage. The following types of injuries are distinguished by severity:

  • Easy. Vision does not disappear, no visible defects will make themselves felt;
  • Average. There is a slight external damage to the eyelid, vision is reduced, but not much;
  • Heavy. The eye practically does not see, structural defects appear.

After chips or crumbs from an angle grinder enter the eyelid, the following symptoms occur:

  • Increased tearing of the eyelid;
  • Pain in the area of ​​injury;
  • Redness of the eyelid;
  • Spontaneous closure of the eyelids due to shavings, it becomes very difficult to open them;
  • Impaired vision.

According to the above signs, it is impossible to reliably determine the degree of eye damage by chips from an angle grinder. This is done by an ophthalmologist using a special microscope. Similar signs make themselves felt after removing the chips from the tool, the only exception is the increased release of tears from the eyelid.

The reason for this is edema, especially if the chips have penetrated much deeper than the initial layer of the epithelium.

What happens if help is not provided correctly?

When first aid is provided incorrectly, negative consequences are unlikely to be avoided. These include both minor injuries and complete loss of vision. The following are considered common:

  • Eyelashes begin to grow incorrectly;
  • Cicatricial damage to the eyelids;
  • It becomes difficult for a person to fully open the affected eyelid;
  • The eyelids are gradually growing together;
  • Barriers are created for the unhindered release of tears;
  • Development of dryness syndrome;
  • Opacity of the cornea;
  • Cataract;
  • Inflammation of the organ flows into the chronic stage;
  • Glaucoma;
  • Rust appears around the metal shavings caught in the eye. The thing is that oxidation occurs under the influence of tears. Rust itself is fraught with inflammation and severe pain.

What to do at home if chips, sparks or chips from an angle grinder get into the eye?

During work with an angle grinder, due to carelessness, chips can get into the eye. You need to know how to properly provide yourself with first aid, so as not to lose your sight. In this article, we’ll show you what to do in such a situation.

  1. Types of injuries and typical symptoms
  2. What is absolutely forbidden to do?
  3. How to remove chips, chips or scale at home?
  4. What happens if help is not provided correctly?
  5. Conclusion

First aid. How to remove a foreign body from the eye

Consequences of improperly provided first aid for eye injuries

If it is incorrect to provide first aid for eye injuries, serious negative consequences can occur:

  1. Cicatricial deformity of the eyelids.
  2. Eyelash growth is wrong.
  3. It becomes impossible to fully open the damaged eye.
  4. Eyelids grow together.
  5. Narrowing or obstruction of the lacrimal passages.
  6. Corneal opacity, possible partial loss of vision.
  7. Dry eye syndrome.
  8. Lens clouding. Cataract.
  9. Chronic inflammation of the eye structures, resulting in gradual loss of vision.
  10. Glaucoma is an increase in intraocular pressure.
  11. Loss of an eye.
  12. The appearance of rust around metal shavings that have got on the eye structures.
READ  Disc For Removing Rust Under The Angle Grinder

Basic actions in the event of hot scale from an angle grinder

Dross is a spark from an angle grinder, grinder, welding and other hot metal body.

If the chips have been removed, the next step is to treat the burn they left.

To avoid serious complications, an ophthalmologist must eliminate the burn. He uses local anesthetic drops, a sterile needle, and a microscope.

After the procedure, you should definitely adhere to all doctor’s prescriptions at home. These are mainly antibiotics and non-steroidal anti-inflammatory drugs. Such preparations can be used in the form of ointments. For example, Floxal ointment.

If metal chips get into the eye, then the cornea heals within a week. In severe cases, recovery may take two weeks.

Superficial epithelial translucent opacities are often formed. If the scale gets in and stuck to the central parts of the cornea, then vision may be reduced.

Basic actions in the event of hot scale from an angle grinder

Dross is a spark from an angle grinder, grinder, welding and other hot metal body.

If the chips have been removed, the next step is to treat the burn they left.

To avoid serious complications, an ophthalmologist must eliminate the burn. He uses local anesthetic drops, a sterile needle, and a microscope.

After the procedure, you should definitely adhere to all doctor’s prescriptions at home. These are mainly antibiotics and non-steroidal anti-inflammatory drugs. Such preparations can be used in the form of ointments. For example, Floxal ointment.

If metal chips get into the eye, then the cornea heals within a week. In severe cases, recovery may take two weeks.

Superficial epithelial translucent opacities are often formed. If the scale gets in and stuck to the central parts of the cornea, then vision may be reduced.

What to do if dross from an angle grinder gets in the eye?

By nature, our eyes are protected by eyelashes, but sometimes this protection is not enough. And various small particles get into the eyes. In many cases, it is almost impossible to protect yourself from this.

People often suffer and find themselves in such a situation because of the specifics of their profession. When working with an angle grinder, almost everyone has faced this problem.

And the eyes are an organ that needs to be protected. Any foreign matter should be removed from the eye as quickly as possible. One day is enough for toxic oxidation products of colored metal to enter into a chemical reaction with living tissue and eye fluids.

This should not be allowed, since the complications are very serious. You can go blind forever or lose an eye. Therefore, in a situation when chips from an angle grinder got into the hole, what should be done at home, it is very important to know.

READ  How to Redo Angle Grinder for Stroborez

Sometimes the victim manages to independently pull the foreign body out of the eye. But often the problem occurs during the workflow. And when dust and shavings fly in different directions, it is better to ask for help.

In any case, this situation requires the right action.. This will make it possible to avoid serious consequences and preserve vision.

First aid. How to remove a foreign body from the eye

What to do if a chemically active substance gets into the eye

Wash your hands thoroughly. Make sure they are free of soap or any substance that has gotten into the eye.

Remove and discard lenses. The lens can absorb the substance and irritate the surface of the eye.

Flush eyes with water for 15-30 minutes. If discomfort persists, see your doctor. Just in case, take a sample of the substance that got into your eye with you.

If there is glue on the conjunctiva, do not try to remove it yourself: only an ophthalmologist should do this. Rinse your eye and go to him.

General Tips

A brush of mascara, a twig, or a fingernail can cut the surface of the eye, and you will feel intense burning and discomfort, or feel nothing if the scratch is small. Therefore, it is better to play it safe and appear to a specialist. Your doctor will prescribe drops or ointments to prevent infections and scarring from developing.

Do not handle eyes with unwashed hands. Do not rinse the mucous membrane with dirty water. Do not use tweezers, toothpicks or any other hard objects, as they can easily cut delicate tissues.

Do not try to remove an object that has injured the surface of the eye and cannot be washed off with water. In this situation, you should immediately consult a doctor.

Do not rinse your eyes if you are wearing contact lenses. Remove them first.

What to do if a foreign body gets into the eye

Wash your hands thoroughly. Examine the mucous membrane of the eye to find a foreign body.

Non-sharp objects (eyelashes, hair, particles of cosmetics) can be removed with a cotton swab soaked in water. If the hair is light and you cannot find it, rinse your eye.

It is better not to touch sharp objects (shavings, glass, coarse sand), as they can scratch the tissues of the eye and lead to serious complications, including loss of vision. Pull back the upper eyelid slightly and rinse the eye with water. You can use an eye bath, a regular glass or bottle for this.

If the item does not wash off or discomfort remains after removal, cover or lightly bandage the eye with gauze and immediately contact the nearest ophthalmologist or call an ambulance. Never press on the eye.

Only a doctor can determine that your eyes are normal. Therefore, even if you managed to remove a foreign body, consult an ophthalmologist.