Handheld circular saw with stationary mounting capability

Useful extras

Optional accessories make your work easier and more efficient, increasing comfort and cutting quality. Let’s pay attention to the most popular additions:

  • The laser pointer allows you to keep the cutting direction accurate, even if the markings are hard to see;
  • Platform marking is another way to improve sawing accuracy;
  • The spindle lock allows you to change the saw blade quicker and easier (in its absence, you need to use two wrenches);
  • Models are equipped with dust collectors for removing sawdust and fine dust generated during operation. This device can be built in or connected via a special nozzle. A vacuum cleaner or construction vacuum cleaner can also be connected via a nozzle to the circular saw. Very helpful addition.

Circular saws and circular saws on the table

With this sawmill you can quickly perform cross and rip cuts in wood or plastic. Quick start brake and restart protection.

Soft-start motor and vibration damping during operation. Side and rear table extension for comfortable sawing of large workpieces. Vacuum cleaner connection available

  • Voltage, V 220
  • Circular saw blade diameter, mm 30/2.8
  • Weight, kg 20.5
  • disc diameter, mm 250
  • Power, W 1500
  • Max. RPM 4500
  • Max. cutting depth, mm 80
  • Voltage, V 220
  • Diameter in the hole, mm 30
  • Weight, kg 37
  • Diameter of disc, mm 260
  • Power, W 1650
  • Max. RPM 5200
  • Max. cutting depth, mm 93
  • Voltage, V 220
  • Seating hole diameter, mm 30
  • Weight, kg 35.1
  • Diameter wheel, mm 260
  • Power, W 1500
  • Max. rpm 4300
  • Max. cutting depth, mm 93
  • Voltage, V 220
  • Diameter in the hole, mm 30
  • Weight, kg 14.5
  • Diameter wheel, mm 205
  • Power, W 800
  • Max. rpm 3450
  • Max. cutting depth, mm 40
  • Voltage, V 220
  • Diameter, mm, planting hole 30
  • Weight, kg 38
  • disc diameter, mm 255
  • Power, W 1600
  • Max. rpm 4500
  • Max. cutting depth, mm 80
  • Voltage, 220
  • Diameter of drilled hole, mm 30
  • Weight, kg 26
  • Disc diameter, mm 254
  • Power, W 1800
  • Max. RPM 3650
  • Max. cutting depth, mm 79
  • Voltage, V 220
  • Seating hole diameter, mm 32
  • Weight, kg 63
  • Diameter wheel, mm 250
  • Power, W 2000
  • Max. RPM 2850
  • Max. cutting depth, mm 88
  • Voltage, V 220
  • Diameter in the hole, mm 30
  • Weight, kg 22
  • Disc diameter, mm 250
  • Power, W 2000
  • Max. 1400. rpm 5000
  • Max. cutting depth, mm 85
  • Voltage 220V
  • Diameter, bore, mm 30
  • Weight, kg 17.3
  • Wheel diameter, mm 210
  • Power, W 1200
  • Max. rpm 4800
  • Max. cutting depth, mm 45
  • Voltage, V 220
  • Diameter seating hole, mm 16
  • Weight, kg 11.7
  • Wheel diameter, mm 200
  • Power, W 800
  • Max. RPM 2400
  • Max. cutting depth, mm 45
  • Voltage, 220V
  • Diameter seating hole, mm 30
  • Weight, kg 26
  • Wheel diameter, mm 254
  • Power, W 1400
  • Max. RPM 5000
  • Max. cutting depth, mm 75
  • Voltage, V 220
  • Diameter in bolt hole, mm 30
  • Weight, kg 17.5
  • Disc diameter, mm 210
  • Power, W 1200
  • Max. rpm 4800
  • Max. cutting depth, mm 45
  • Voltage, V 220
  • Diameter of the landing hole, mm 30
  • Weight, kg 35
  • disc diameter, mm 254
  • Power, Watt 2100
  • Max. rpm 3200
  • Max. cutting depth, mm 79
  • Voltage, V 220
  • Diameter of the drive bore, mm 30
  • Weight, kg 36.5
  • Diameter wheel, mm 250
  • Power, W 1500
  • Max. rpm 4500
  • Max. cutting depth, mm 80
  • Voltage, V 220
  • Diameter, mm planting hole, mm 30
  • Weight, kg 30.0
  • Disc diameter, mm 255
  • Power, W 1650
  • Max. rpm 4800
  • Max. cutting depth, mm 91
  • Voltage, V 220
  • Diameter of mounting hole, mm 30
  • Weight, kg 21
  • Wheel diameter, mm 255
  • Power, W 1600
  • Max. rpm 5000
  • Max. cutting depth, mm 76
  • Voltage, V 220
  • Diameter of the hole, mm 30
  • Weight, kg 35
  • disc diameter, mm 254
  • Power, W 1700
  • Max. rpm 5000
  • Max. cutting depth, mm 76
  • Voltage, 220V
  • Diameter of the drive bore, mm 30
  • Weight, kg 16
  • Diameter of disc 210
  • Power, W 1200
  • Max. 1400. rpm 4800
  • Max. cutting depth, mm 48
  • Voltage, V 220
  • Diameter seating hole, mm 30
  • Weight, kg 53
  • disc diameter, mm 315
  • Power, W 1650
  • Max. RPM 2950
  • Max. cutting depth, mm 85
  • Voltage, V 230
  • Diameter, tooling hole, mm 30
  • Weight, kg 103
  • disc diameter, mm 254
  • Power, W 2100
  • Max. rpm 3500
  • Max. cutting depth, mm 70
  • Voltage, V 220
  • Diameter of insertion hole, mm 30
  • Weight, kg 24.3
  • Disc diameter, mm 254
  • Power, W 1800
  • Max. rpm 4500
  • Max. cutting depth, mm 84
  • Voltage, 220
  • Diameter seating hole, mm 30
  • Weight, kg 34.8
  • Disc diameter, mm 260
  • Power, W 1500
  • Max. RPM 4300
  • Max. cutting depth, mm 93
  • Voltage, V 220
  • Diameter of the hole, mm 30
  • Weight, kg 98
  • Diameter of disc, mm 254
  • Power, W 1500
  • Max. rpm 3500
  • Max. depth of cut, mm 70
  • Voltage, V 380
  • Diameter of the landing hole, mm 30
  • Weight, kg 136
  • Wheel diameter, mm 250
  • Power, W 3400
  • Max. RPM 3000
  • Max. cutting depth, mm 80

Desktop circular, band and stationary circular saws are sawing machines designed, as their name suggests, for sawing and making cuts in a variety of wood, plastic, ferrous and non-ferrous metals and leather, depending on the product model.

Selection criteria for stationary fixture circular saw

Although the choice of models with stationary mounts is not rich, it is necessary to choose the most suitable model among them.

Power

Sawing wood requires a lot of effort, so it is more effective to work with powerful saws. And it has a longer service life because the stronger motor requires less effort and does not overheat. At the same time, the more powerful the device, the heavier it is. But the question is partially solved by table stand.

The smallest and weakest machines have 1200 watts, the largest 2500 watts. Selection should be based on how the tool is used.

Cutting depth

This is also an important parameter, although it is not very different for large and small saws. Particular attention should be paid to the maximum angle cut. Modern models have possibility of degree cutting. The value of the saw cut under the degree is always much less than in a straight line, this is the parameter you should pay attention to when looking for a small hand saw.

Saws accessories

Each manufacturer offers a lot of options for completing their products. The most important additions are:

  • The limiter is used to remove straight edges of the material, to turn an unedged board into a cut board, to cut long strips of material from a piece;
  • The ruler is bolted to the platform and helps to measure the width of the piece to be cut.

Most of the extras in inexpensive saws made in Asia. Famous brands usually only provide a small selection of the device and the limiter. The rest will have to be purchased.

Features

Modern circular saws are an extensive class of joinery equipment. The most important characteristics that determine the classification of these tools are the power of the electric motor, which determines the possibilities of use, and the dimensions.

Thus, more powerful electric motors can provide a longer non-stop operation. They also give the opportunity to install a larger diameter blade and, accordingly, to handle thicker workpieces, not necessarily dried, but also raw, including hardwood and even frozen.

For the workshops working in a permanent intensive mode you need a circular saw with a 2 kW motor or even more.

For the home handyman’s workshop, working occasionally with small workpieces, such power will be absolutely not justified.

An engine of no more than 1.5 kW will do the job just fine.

A more powerful machine would require a stationary installation in a specially equipped place, taking up considerable space in the workshop. this is necessary not only because of the size of the unit, but also for the convenience of its operation.

A powerful motor will provide a high rotation speed of the saw blade, which certainly affects the quality of the cut, which is very important, for example, in the manufacture of furniture or parquet strips.

Powerful professional machines, due to their large size, including those required to ensure the stability of a stationary machine, are very difficult to transport. Conversely, mobile circular saws with small technical capabilities and a low-powered motor are quite convenient for transportation to summer cottages and production of small urgent work.

Motor power also determines the class of the appliance, which affects the cross section of the power cable and the overall electrical safety. Lightweight mobile machines have a flexible cord and can be plugged into the power grid.

Stationary circular saws often have a soft-start system to avoid overloading the motor and work elements. a very important option when working with high power.

Some professional models also have a dust extraction system. a feature that allows you to attach a vacuum cleaner pipe and thus greatly reduce the amount of dust that is unavoidable.

Top 5 Cordless Circular Saws: Toolsday

The most advanced models of professional saws have an emergency stop that activates if a human hand touches the rotating blade.

Lightweight table saws combine sufficient power and compactness with good functionality. Some models are equipped for easy movement with a special wheeled carriage and a frame with holes for fastening to the floor with screws.

The most mobile machines can be placed on a table, workbench or similar horizontal surface.

circular, stationary, mounting

Main characteristics

Considering different models of circular saws for stationary installation, first of all you need to pay attention to their performance characteristics, which determine the effectiveness of their use for a particular task.

Power

The power rating is in the 400-2000 watt range. The exact figure is determined by the class and scope of the tool. Sawing performance increases with increasing power. This allows the user to spend less time and effort when cutting thicker and denser material.

Disc speed

This parameter is directly influenced by power. Increasing rotational speed allows for a more precise cut. It should be remembered that when sawing plastic it is desirable to choose a low frequency of cutting, because otherwise you may encounter such an unpleasant phenomenon as melting of materials caused by high speed of the disk rotation. The standard value for this parameter for professional models is 5000 rpm.

Depth of cut

The value of this parameter ranges from 0 to 85 mm. The exact value is determined by the class of the saw. Modern circular saws can offer different cutting depths, which is determined by the motor power.

Cutting angle adjustment

While this characteristic is mandatory for all modern circular saws, not every circular saw has the ability to tilt the tool in either direction. Tilt angle is limited to 45 degrees.

Stationary circular saws

POWERTOOL online store.RU offers a wide range of stationary circular saws. This tool is also called circular, because its cutting element is a appropriately shaped plate with sharpened teeth. This type of equipment is suitable for longitudinal and bevelled sawing of hard materials, especially of natural wood and metal. The main advantages of the electric circular stationary saw include high productivity and speed.

How to choose and what to pay attention to?

When buying a circular circular saw, it is enough to focus on the main parameters of the tool:

  • Power. it is selected according to thickness and density of material to be cut. Power is small. up to 0,8 kW, medium. 0,8-1,2 kW and big. more than 1,2 kW.
  • Weight. the saw is always in the weight, so it is more convenient to work with a lightweight model.
  • Cutting depth. depending on the blade. The index of 40-50 mm is enough for domestic tasks, starting from 60-70 mm for professional tasks.
  • Speed. it influences the performance and the ability to cut different materials. The higher the index, the more dense materials can be cut.
  • Work at an angle. most of the tools are used for straight cutting and the floor at an angle of 45 degrees. There are 60 and 90 degree cuts.
  • Diameter of discs. ranging from 130 to 250 mm.
  • Additional features. make your work with the tool easier. Among them are soft start, laser tag, sawdust collection, motor lock against accidental start, stationary chip removal system.

Circular saws (circular saws)

Circular saw (circular saw) is a tool used for precise cross and longitudinal cutting of boards, plastic, chipboard, laminate. Easy to use, set up based on task and volume. This saw is characterized by its small size, mobility and low weight. Models differ in terms of motor power, maximum cutting depth, blade diameter and other parameters that simplify the work and increase the range of application.

Circular saw is mainly used in high dusty environments. In turn, manufacturers equip them with ventilation system and function of waste removal from the working area. They can also be connected to industrial vacuum cleaners by means of special adapters. Some models have a laser guide and soft start function.

Classification

Household. The domestic line includes “circular saw” power in the range from 1200 to 1800 watts with a cutting depth of 45-60 mm. They are equipped with cutting discs with a diameter of 130-210 mm. These models are sold at a lower price. They are suitable for small amounts of work, for soft material. Mainly used in the home and small workshops.

Professional. Professional line circular saw is distinguished by high engine life, quality and precision. Power consumption will be from 2 kW. With a cutter diameter of up to 360mm. They are taken to production, to work every day.

circular, stationary, mounting

Submersible. They can be used for plunge cuts in all positions and angles. They have a number of advantages: cutting precision, safety, guide rail compatibility.

Cordless tools have been gaining popularity as of late. The advantage of cordless circular saws is that they are not tied to the mains electricity, which increases their mobility. A disadvantage will be a limitation on the time of work.