How can you cut the floor tiles. Tile cutter in the form of forceps

How and how to cut floor tiles

When laying tiles on the floor, the question often arises of how to cut the floor tiles with high quality, with minimal efforts, high speed and guarantees of a good result. You can do this with a variety of tools and devices. About this in our article.

When decorating ceramic tiles, there is often a need to get pieces of a non.standard shape or smaller size (compared to the whole). There is also a need to make figured cutouts. For example, a short list of situations:

• The question of how to cut the tiles in a straight line arises when laying floors and walls, if necessary, clearly approach the wall in the visible zone;
• Cutting off small tiles may be needed to decorate small areas of the surface to be cut;
• the need for curly cuts or a clear provision of inclination angles-occurs if some surface is laid in a semicircle or in complex geometry;
• The question of how to cut ceramics arises either with the requirements of a very clear configuration of the edge, or quite careless, subject to masking or invisibility of the location of the styling element.

During the repair, there are a lot of situations. Since the characteristics of the floor tiles differ from each other depending on the thickness, such as the coating, the size of the element. then you will have to work with different tools in each case.

Tile cutting tools

We list the tools with which you can cut the floor tiles at home, including, if necessary, to guarantee excellent speed and accuracy of processing.

• Handing tiles. Designed to create direct cuts.
• Electric tile. Provides high speed and accuracy on the industrial scale of the finish, can create holes with a edge of straight lines.
• Corner grinder. A common and fairly convenient tool requires dexterity and special security measures, is used for direct cuts and creating rectangular holes.
• Electric. Used in a wide range of works, they include cutting sex tiles along a complex path. It implies the presence of dexterity and the use of special saws.
• Drill. When using various nozzles and drills, such a tool can be made a huge range of work.
• Hand glass cutter. Limited use tool is used at home. You can cut sex tiles of only a certain number of thicknesses and strength.

During the creation of various cuts, manual tools are also used. These include nippers, pliers, wooden and rubber hammers, nozzles or manual devices for clushing.

No matter how to cut floor tiles. The characteristics of the material and its behavior during destruction implies the use of some protection measures. In particular:

• It is recommended to use light thread gloves. When processing floor tiles, small sharp fragments are inevitably formed, both the gloss of the surface and internal material;
• The protection of the respiratory system is required, especially if it is decided to cut the tile for the floor with a mechanized tool: corner grinding or electric tile cutter;
• Protective glasses. a critical security measure. Even when using manual tile cutter or glass cutter. a rebound of pieces of glassy glossy gloss is very dangerous.

The use of workwear is also very recommended. Such equipment will be optimal, however, in the context of real work, most performers ignore the protective form.

Used tools and methods of cutting

How to cut tiles at home, have its own characteristics. Basically, they are due to the fact that professional electric tile cutter is not available for repairmen due to high cost. However, for the tasks of cutting, you can use glass cutter, a corner grinder, and even a jigsaw. Each type of tool allows you to realize its cutting method. We will tell you more about this.

Manual glass cutter

Piece cutting of ceramic tiles can be performed by ordinary glass cutter. This is a cheap manual tool that many have.

Here’s how to cut off the tile, if you use glass cutter:

• It should be noted a fishing line for a trimmer of cut using a construction pencil or marker, best of all from the inside;
• It should be fixed by applying a flat ruler to the cut line;
• Now you can cut: for this, glass cutter is held as an ordinary handle and drawn along the line sharply, once;
• Then, under the material on a fishing line for a trimmer, a head.up is placed and pressed on both sides: after that, the tile is broken down.

It is important to choose the right type of glass cutter, taking into account how thick the tiles you plan to cut. The standard roller model is suitable for thickness up to 10 mm. If you need to cut a tile with a thickness of 10-12 mm, you need to choose an oil model. And diamond glass cutter copes well with ceramics up to 6 mm thick.

In any case, such a cutting of tiles will require finalization of the seam, since it will turn out with protrusions and roughnesses. The surface will need to be finalized with sandpaper.

Angular grinder or corner grinder

On the question of “how to cut a ceramic house tile” among different tools, of course, leads a corner grinder or corner grinder leads. This method is suitable for crooked and even lines. The most convenient will be a small angular grinder, with a diameter of 125 mm. It can be held in your hands for quite some time, that is, it becomes possible to do work on trimming for a long time. In addition, such a cutting tool is cheaper.

The power of the corner grinder for such work does not matter. But you will need a special diamond circle or cutting on stone, always the one that is suitable for dry cutting. It is also important to take care of your own protection: you need to use gloves and glasses, as well as a respirator. The fact is that when the corner grinder is constantly formed, a large amount of dust is constantly formed, and pieces can fly out over long distances, and this is injured. If figured cutting is planned, it is better to use a clamp or a vice in which you can fix the tile. A special “slider” type can also be put on the corner grinder: this is a special device with a supporting surface, which serves as an emphasis for the tile and prevents it from moving.

Here’s how to cut the tile with a corner grinder: first you need to make a mark, and then go through it several times, deepening at one pass to 3 mm. If we are talking about small segments, up to 20 mm, then you can cut at all the thickness immediately. You can also cut from the front and from the back, 3 mm for each pass. This will preserve the front surface of the intact.

It is also important to avoid chips. To do this, the disk is kept a little at an angle, so that there is no 90 degrees between it and the surface of the tile. This approach to cutting greatly simplifies subsequent refinement. Also if you choose a slider nozzle, then grinding chips will have to be less.

Cutting porcelain tiles with a corner grinder is also possible. But in this case, you need to choose circles intended not for dry, but for wet cut. It is possible to organize the supply of water to the working area as follows: you need to take an ordinary plastic bottle and pierce the hole in the cork. From it it will be possible to serve water to the disk during operation. Porcelain tiles often do not require finalization after cutting. Roughness in this dense material remain only in the lower part.

Electric jigsaw

When they ask how to cut the tiles, they choose either a corner grinder or a tile cutter. But the electrician is “underestimated”. It provides a fairly high speed of cut, only you need to use a special saw on stone.

Typically, any wall tile is sawn well. for example, for the bathroom. With the help of a jigsaw, you can make a flat or curved incision with a large radius. It also suits it in cases where you need to cut the hole.

In the implementation of such work, the following is important:

• The pendulum course of the electrician must be disabled, as it reduces the quality of the cut too much;
• A saw on stone is selected, but if we are talking about floor material (increased density), then you need to choose a tool with diamond spraying;
• The marking on the surface is applied with a marker;
• Tiles for cutting must be placed on a stool or on the table, that is, on a flat horizontal surface, and you can hold your hand;
• The jigsaw during work is carried out in the direction of “from itself”;
• After cutting the edges of the tiles are grinded.

Manual tile cutter

Compared with glass cutter, then this is a more progressive and convenient tool. It was created specifically to cut ceramic tiles, not only wall, but also floor. Also, with its help, you can cut porcelain tiles, although it will be more difficult. The thickness of the cut material here can be up to 40 mm.

Curved lines using such a tool are not executed. But they can make straight, angular or diagonal.

Using a manual tile cutter should be like this:

• Marking is performed on the front surface;
• The processed material is fixed directly in the tile cutter: this tool already has rubber anti.slip lobs;
• The incision is made in one pass, while significant physical efforts are not required: it is enough to take the handle, install the roller cutter and draw a video forward;
• After that, the pen will go to the fracture position: the foot presses on the tile and it split along the groove made;
• The resulting seam will be even, neat and practically does not require improvement.

It is worth considering that domestic inexpensive tiles are made on bushings, and professional, suitable for large volumes, are made with bearings. The instrument of the prof-class has a large resource of strength and makes a more accurate pure cut.

How can you cut a round hole in the tile

If everything is relatively simple with a linear reza, that is, you can choose almost any tool, then preparing a round hole often causes difficulties. So, how to cut off the tile, if you need to make a round recess? Here you need any tool that can rotate. For example, it can be a drill, peorator or electric screwdriver. It is important that there is an opportunity to set the rotation speed up to 500 rpm.

Drilling nozzles are selected depending on the dimensions of the hole that you need to get:

• If the diameter is from 15 to 30 mm, then you can use the drills: they can be spear.shaped (cheaper), with carbide attacks or special sharpening (they cost more, but give the best result);
• If the diameter of the hole is from 20 to 50 mm, then it is best to use a special crown with diamond, carbide-wolframa or corundum attacks;
• If the diameter is more than 50 mm, then you can use the corner grinder, but you need to have a skill.

How to cut a porcelain border cutter

This is the easiest to use the tool. It also gives a minimum effect. With the help of glass cutter, cutting porcelain tiles can be, but provided that its thickness is small. So most often cut the facing for walls. Glass cutter can not cope with floor tiles.

There are two varieties of the tool: with a roller made of hard alloys of metals and with a diamond cutter. The last option cuts better, but faster fails. Its cost is higher than that of the roller analogue.

With the help of glass cutter, you can perform a straight or figured incision. In the latter case, special nippers will also be needed. To cut off the tile in a straight line, we act as follows:

• We lay the cladding on an even base. We determine where the fishing line for the trimmer will take place.
• We take a ruler, lay it along the future cut line and press it with your fingers.
• Carefully, but with strong pressure, we conduct a tool for a trimmer in a ruler with an instrument. We try to scratch a fairly deep groove at a time. Otherwise chips cannot be avoided.
• Put the part on the edge of the table or workbench and press on its edge with force. So that the cladding split along the intended line.
• Grind the edge if necessary.

If you need to perform a curved cut, glass cutter is carried out for a trimmer. Then you need to take the nippers and use them to remove the areas of the tile. The closer to the cut line, the smaller fragments should be abandoned. The edge with such processing will turn out to be sharp and not entirely even, so it must be polished.

How to cut porcelain tiles

The principle of operation of the tool is somewhat similar to glass cutter. There is also a cutting video that moves along the guides. In addition to him there is a bed on which a part, lever and guides are laid. It is very important that the diameter of the cutting element corresponds to the height of the tile.

In addition, when choosing a device, attention is paid to:

• The bed of the device. The metal from which it is made should be thick enough so that the base in the cutting process does not vibrate or bend.
• The strength of the guide elements and support.
• The smoothness of the carriage. It is desirable that special bearings are provided with this.
• Lack of backlash when promoting a carriage. If you have it, it is impossible to perform an even slice.

The tiles differ in length, and it is better to choose a long model. This will make it possible to cut porcelain tiles of different sizes, not only along the side, but also diagonally.

Rubi tile cutter 650 mm

To cut off a fragment of porcelain tiles in a straight line with your own hands, you need to perform the following steps:

• Put a tile cut on a strong even base.
• On the product, we plan a fishing line for a cutting trimmer.
• We put the part on the bed so that the trajectory of the roller moves exactly on the wrap.
• We carry out a cut, pressing on a carriage and moving it from yourself.
• Let the handle go and break the part with strong pressure.
• Grind the cut to remove possible chips.

It is very simple to work with a mechanical tile, even a novice master will cope. True, there are some shortcomings that you need to know:

• A fragment with a width of 6 mm is so impossible to cut off in this way.
• Removing the chamfer or performing a curved incision with a mechanical tile cutter is also impossible.
• If the cut falls on the rib or surface of the material ribbed, the probability of chips is very likely.

All about cutting tiles with an angle grinding machine

To begin with, the tile cutter is designed to cut the tile. For each of its varieties: thick or thin, more or less strong, you can find a suitable tool model. The main advantage of the tile cutter. it gives an even cut without chips. There is no large amount of dust in the process, the risk of ruining the plate minimum. With an angle grinding machine, everything is wrong.

Corner grinder Makita GA5030

You can cut ceramics with it, the result can be very good. But for this you have to try. It is desirable that there is a skill of working with a grinder, otherwise there is a great risk of spoiling the material. The tool will cut any cladding if you choose the right cutting disk. One must be prepared for the fact that in the process the saw will be very noisy, a lot of dust will rise into the air. a fishing line for a trim of a cut can be chopped.

Nevertheless, home masters choose exactly a corner grinder. The reason is simple: a tile, especially if it is a high.quality and a model that is well.core with work, is expensive. Buying it for the sake of decorating one room is unprofitable. It’s cheaper to trim the angle.grinding tool. You just need to learn how to handle it correctly.

What disk to cut tiles

The tool for the tool is selected for a specific material. Several varieties of discs are suitable for cutting tiles.

Circles made of stone

Cutting element of significant thickness. Due to this, the cut is wide, the amount of dust during work increases. The main disadvantage is the rapid wear of the consumable. over, if chips or other defects appear on it during work, the circle is immediately changed. Otherwise, it can collapse by damaging the processed part and causing harm to a person working with him. Stone discs are the cheapest.

Steel circles

Thin equipment with different processing. For solid materials, select steel with diamond spraying. Such a cutting device easily copes with the task, for a long time does not grind. For cutting, three varieties of steel disks are used.

How to cut tiles with an electric tile cutter?

If it is planned to work with a very hard and large tile format, then it is best to use professional equipment. electric tile cutter. To work with such equipment, certain professional skills are needed. In particular, since the cutting process is quite complex and laborious. However, nevertheless, if you are interested in how to cut ceramic tiles as quickly and neatly even with very large volumes, then an electric tool is the best choice. Such equipment is quite expensive, but pays off with repeated use and can serve several decades. In its design, electric tiles is almost completely identical to a modern circular saw. The main differences are in the discs used and the presence of water baths.

Another feature of these machines is the ability to carry out a neat cut with an inclination. This is very useful when facing external angles. In this case, the need for aluminum or plastic corners completely disappears completely. The product, which is jointly in the corner with a trim of 45 degrees, looks very interesting.

We present to your attention a brief operating instruction:

• Pour water into the bath so that it overlaps the disk by 2-3 centimeters;
• We measure part of the tiles that need to be cut off and put on the machine;
• Then we press our canvas to the machine and slowly bring to the disk. It is not recommended to crush strongly on the disk, as it can stop;
• Now you need to make a cut on the second line. To do this, carefully raise the tile and do a similar procedure.

Cut ceramics with a corner grinder

Very great opportunities for cutting are given an angular grinder. it can easily and neatly not only cut along even lines, but produce figured cutouts. If desired, using an angular grinder, in the tile you can cut a beautiful round hole with a diameter of 70 mm. In order for the glossy surface there are practically no chips, it is necessary to use only a new diamond circle and carry out a cut on the back of the product. Therefore, before cutting the tile, you need to make sure as a circle and its functionality before the corner grinder. We make markings, carry out the marking disk and break off the long part. We break off the rest. The corners can be trimmed with forceps or the same corner grinder.

Corner grinder equipped with a diamond disk, in fact, is a universal tile. In order to increase the effectiveness of the tool, the equipment can be equipped with a special cooling system. Of course, this increases the cost of the tool, but at the same time, it increases its performance. It is due to its effectiveness that the corner grinder has become quite widespread today.

Useful tips

Working with tiles requires some skills. To get a high.quality and beautiful cut, you should adhere to several recommendations:

• Using an electric tool, all safety rules should be followed. Process the materials carefully and slowly.
• Do not try to cut the tile of the corner grinder completely in one pass. It is advisable to initially cut out a small groove, repeating this in several approaches.
• Cut curly elements (for example, snowflakes) from ceiling and other tiles best with the help of corner grinders, drills and other tools.
• Give preference only to quality tools. This is especially true for diamond discs and crowns that quickly fail.
• Capal of ceramic tiles can be facilitated if it is soaked in water for a while. This will lead to softening its structure, which minimizes the risk of chips.

Tile cutting technology differs depending on the selected material. To simplify this process, select a quality tool that is optimally suitable both in terms of quality and efficiency.

The methods below are perfect for cutting tile, ceramic tiles at home, due to the lack of the possibility of using a professional tool.

Corner grinder

This tool can be found actually in any pantry or garage, if necessary, it can be bought, it is inexpensive. In addition, with this tool, you can easily cut the tiles at home, you only need to have basic skills to work with this device.

• In order to carry out the right and high.quality cut using this tool, it is necessary to use a high.quality circle to work on stone, as well as protective devices of the organs of vision, breathing and hand.
• With the help of this tool, you can carry out direct and figured cuts, it is quite possible to even cut even circles, diameters of at least 5 cm, but this is possible only with a great experience in the master.
• In order to facilitate the process of work, it is necessary to apply landmarks for subsequent cutting. Further, according to these landmarks, it is necessary to create recesses with any sharp object, this will improve the quality of the work on the tool.

It is also recommended to be carried out not on the floor, but on any, stable elevation. Previously, a piece of any board must be placed under the tile, so as not to spoil anything during operation.

Electric

This tool is very underestimated by many masters, but it may well be used for cutting tiles if there is no professional tool and corner grinder.

• For TGO, so that with this device you can beautifully and correctly cut the tiles, you will need to install a file on it on it, which will allow you to work with several varieties of tiles.
• Also, do not forget about safety requirements, it is necessary to use protective glasses, gloves and protection of the respiratory system, because dust will form, which can adversely affect human health.

Particular attention should be paid to this tool if it is necessary to carry out a curly cut, because with the help of an electrician you can easily create very sharp angles and transitions. Such a tool is perfect if it is necessary to cut complex figures from tiles.

Glass cutter

This tool is used at home in extreme cases, if there are no other options. A feature of the use of this tool is that only direct cut can be carried out.

It is also worth considering that the width of the tiles that has to be cut should be at least 2 cm in width.

• Before applying glass cutter, you need to create an approximate scratch so that the cut is the most neat and clear.
• To do this, use a metal line and household (stationery knife).
• Pay attention, working with this knife is as neat as possible, it will be enough to apply a deep scratch to the glossy surface, after which it will be possible to work as a tool.

Shock on the sharp corner

A very risky method, it is used only if there is no need for even split, because in this way it will not be possible to get it.

The main condition is the presence of an acute and durable angle, which is not deformed when the tile is hit. It can be a metal corner or wooden beam.

• It is also worth paying attention to the fact that the blow should be from a distance of 5-8 cm, and should be as sharp as possible.
• You need to take the tile with two hands, on both sides of the edge.
• A blow can be applied in fact at any angle, at which it is convenient, the main conditions are sharpness, distance and fortress of the angle, which will be struck on.

This method is often used for the convenience of transporting old tiles, large in size. After her dismantling, so that it is convenient to carry it, it is broken on the corners, thus reducing it in size. It is not recommended to use this method to reduce new tiles.

Manual tile cutter

During cutting tiles, many use manual tile cutter, as this is one of the most convenient options. He is of high quality and inexpensive at the same time.

Manual tiles consists of the following components:

• support (it is also the basis);
• the guide part of the structure;
• a cutting element consisting of a roller and a cutting disk;
• lever.

The optimality of the option is as follows:

• Due to the simplicity of the design, it is easy to use;
• The handle that moves the carriage with the cutting disk acts as a lever;
• Thanks to the laws of physics, the incision force decreases;
• allows you to make an accurate cut.

But this tool also has its disadvantages:

Safety precautions

During the use of tile cutters, it is important to study the safety rules inherent in any such tool:

• Before starting work, you should study the subject, see if there are breakdowns or other damage;
• The carriage should go unhindered, smoothly and without pushing;
• Pipe.shaped guides should not contain pieces of tiles, traces of the solution and other garbage. After cleaning, they should be lubricated with machine oil;
• The disk for cutting tiles should easily spin around its axis and not contain burrs;
• To avoid injuries, it is advisable to use special glasses and protective gloves.

Basics of thread

Before you start cutting the tile, you need to re.check the calculations, and draw a strip on the tile. Cut is made in this strip. It is better to draw a fishing line for a trimmer with a marker, so it will not be washed, and you will definitely follow the direction of movement.

We fix the tile, clearly fixing it on the tool. There are designs that have seizures with special layers made of rubber. In other cases, you will have to cut off part of the tiles (diagonally). The second half must be held with a hand. However, there is nothing complicated in this. During the cut, you need to measure the pressure exerted by your hand on the handle.

If you attach too much strength, then the decorative layer can easily deteriorate, and if very few, then you will not be able to make a break in tiles. You can’t go through the tile tool twice.

For training, you can use previously broken material. Having fixed it, you need to lead a carriage on yourself. So you can easily decide on the power of the required pressure. The cut should be made in one movement, otherwise you can damage the decorative part of the tile.

After the cut is performed, the tile should be put on a smooth surface, the fishing line for the cutting trimmer should match the edge of the surface. With one hand holding the tile on one side of the cut, on the other. we crush.

If everything is done correctly, then the tile should break exactly along the line. Above it was told how to work properly with a hand tile, below. we will analyze its electrical version.

Electric tile cutter

Not everyone has such an electric device, and many are interested in how to use it. Electric tile cutting is similar to the circular due to the identical location of the rotary head, engine, support and disk. They are distinguished only by the fact that in a high.quality electric tile cutter there is dishes with water below. Due to this, the disk is cooled during the cut and the dust decreases.

Positive quality of electrical tile cutter:

• It allows you to make a perfectly even section;
• the minimum number of chips formed;
• allows you to cut the tile at a certain angle;
• almost complete lack of dust;
• The possibility of cutting small parts.

Safety regulations

We must not forget about safe behavior when working with an electric device.

• The work should be performed only in special glasses;
• Before starting work, it is worth paying attention to the disk, which should be sharp enough and rotate evenly;
• If there is an incomprehensible sound or sparks, the equipment should be disconnected from power and attributed to the service center;
• Check if there is water;
• You can start cutting only after the disk gains maximum revolutions.

Tile cutting

The main feature of the tool is that it is elementary simple. It must be installed so that the disk is directed exactly along the line drawn for the cut. The tile must be directed, holding, not forgetting that the first touch should be quite easy. Next, a little effort should be made during tile promotion.

If you serve the tile manually without fixing it, you must ensure that the vibration is absent, as chips may form.

Important: in order to increase the time of the disk, you should periodically replace water during the thread, especially if you have a large amount of tiles. During cutting on both parts of the tiles should be pressed with the same force to avoid skew.

Cutting with improvised means

Do not always need to perform a large amount of work. Why spend money if you need to cut off a few tiles. In this case, you can use the following tools:

Important! It is recommended to use a drill with a winning attack. Thanks to it, you can give a deeper scratch to the surface of ceramics better.

How to cut with glass cutter with ceramic tiles? The algorithm of actions is this:

• An extra fragment is measured.
• Marking is applied on it.
• A metal line is superimposed along the line. It is important to do it perfectly evenly.
• It remains to have a one.time with glass cutter or other sharp improvised material along the ruler. In the process, the ruler should be well held. As a result, you get a noticeable scratch.
• The tile is located on the edge of the table or workbench. Scratch on it should coincide with the edge line of the table.
• A strong, confident and sharp movement of the hand should be pressed on the edge of the tile.

The desired piece will break out. It is clear that making a cut perfectly will not work. But you can save money. And after that, just wipe the cut with sandpaper. In addition, if you put tiles in clean water for only an hour, then the cutting process will become better.

note! Some ask whether it is possible to cut ceramic tiles with a jigsaw. Yes, but the cut will not work as high quality as I would like. The use of an electric jigsaw is rational when adjusting the tiles laid in an inconspicuous place. But, there are special saws with diamond spraying for manual or electric jigsaw. This option is allowed.

Complex curly cutting

In addition to standard cutting products in which an even section is made, there is a curly cutting of ceramic tiles. In this case, tiles become useless, as they can make exclusively even cut lines.

One of the common cases of a socket. How to cut a hole under the outlet in ceramic tiles? It all depends on the circumstances. Sometimes it is enough to make a P-shave on the size of the outlet. Another option is to divide two tiles into two rectangular parts and cut them off. In this case, the long side is cut using a tile cutter, and a short. corner grinder. External angles are performed according to the same scheme.

Advice! When marking, it is taken from 1.4 to 1.8 mm per indent from the wall, and 2.5 mm on the grout.

There is another way to perform a P-shaped cutting. For this, any acceptable method is used. For example, the same ruler and glass cutter, to create cuts on the glaze. After which, the excess parts are abandoned, and the edges are wiped with sandpaper.

But how to cut a hole in ceramic tiles under the pipe? It is already more difficult, since there are no straight angles. The hole should be round and even. Professionals use special crowns that have diamond spraying and allow you to quickly make a hole of the desired diameter for a sewer or water pipe.

But what if there are no such crowns? The first option is to use a tile drill or a winning drill. This is not the easiest way, but quite realized:

• Before cutting a circle in ceramic tiles, you need to install the tile on an even and clean surface.
• Marking is applied to the surface of the tiles.
• Drown in the drill are made even holes according to the intended circle. They need to be done dense, the closer, the better.
• Using the same drill, you need to remove the remaining gaps, performing work at an angle of 45 degrees.
• The hole will turn out rude and inaccurate. Therefore, this is recovered with sandpaper and large nippers.

If this hole is made under the mixer or under the units, then you do not need to bother with the alignment of the edges, they will be hidden.

When you need to make a hole of larger diameter, for example, for forced ventilation, a mini-upper grinder is used with a ceramic disk. Again, marking is made on it, and with the help of a corner grinder, two cuts of crosswise are done. After the four even cuts are made between them to form a square. The rest of the edges are bitten off with nippers. Do not immediately bite off large pieces. In the end, everything is cleaned with sandpaper. Another cutting option. directly along the contour of the intended circle of half the thickness. After which the cut is made for the entire thickness of the cross-steal. It remains to break off 4 elements.

You can make a hole using a jigsaw and a special string for it. The tile is placed, a hole is made in it, into which a string for a hand jigs is inserted or a saw on a tile of an electrician. A hole is made along the contour. It will turn out even and neat.

One of the most popular ways is the use of a drill called a “ballerinka”. The ballerinka will allow the most carefully performing round holes of the correct shape of various sizes.