How is the handle of a trimmer for Hitachi grass. Features of Benzosos Hitachi:

TOP-3 trimmers of the Hitachi (Hitachi) lineup and their technical characteristics: we set out in detail

Hitachi trimmers are very popular among lovers of hardy garden technology. Models of this well.known brand are characterized by reliability, strength, low vibration level and noise created. Thanks to the use by the manufacturer of branded innovative technologies, each Hitachi lawn mower is as convenient as possible in operation and is not demanding in maintenance.


Japanese brand Hitachi is one of the largest conglomerates in the world. The company includes a network of production and companies that are engaged in the production of techniques and equipment of various areas of application. Hitachi consists of more than 1100 subsidiaries and companies around the world. Hitachikokico., Ltd one of the main leading world manufacturers of power tools.

Annually the company produces more than 10 thousand new models of various garden equipment, benzo and power tools. In 2017, Hitachikokico., Ltd. announced the rebranding of production and its renaming to KokiHoldingsco., Ltd. From the first of October 2018, the products of this company will be produced under the name Hikoki. At the same time, production has significantly expanded its production capacities and the number of representative offices in other countries, for example, in Germany (KokiHoldingseuropegmbh). Thus, Hitachikokico., Ltd This is one of the largest manufacturers of garden and other tools.

Basic equipment

The factory delivery of the Hitachi CG22EAS gasoline motorcycle vehicles includes the machine itself, a bicycle hilt, a trimmer head and a knife, a container for the preparation of the fuel mixture and operating instructions.

Manufacturer Hitachi, Japan
engine’s type Basiling one.cylinder four.stroke
Engine power, l.With. 0.86 l.With.
Engine power, WT 0.63 kW
The volume of the gas tank 0.45 l
The volume of the cylinder 21.1 cm 3
The performance of the bar straight
The diameter of the bar 24 mm
Lever “Bicycle”
Starting system manual starter, smooth start
Drive unit petrol
The width of the bevel with a fishing line 440 mm
The width of the bevel with a knife 255 mm
The weight 4.7 kg
Dimensions (DHSHHV) 1745 x 730 x 525 mm
The dimensions of the packaging 1000 x 1000 x 108 mm
Warranty for the drive shaft

Features of application

Before starting work on the Hitachi CG22EAS motorcycleos, operators should familiarize themselves with the instructions for use in order to safely apply a trimmer for grass.

During the operation of the Hitachi CG22EAS lawn mower, operators should be dressed in overalls: protective overalls, closed shoes, gloves and glasses.

The Hitachi CG22EAS lawn mower can work with a knife and fishing line. The choice of cutting tools should be based on the type of processed surface. If there is work exclusively with herbal cover, then you can use a fishing line for a trimmer. The knife is used to cut shrubs and shoots of trees with a diameter of up to 3 cm.

Removing and disassembling the starter, replacing broken parts

To repair the starter of the trimmer for the grass, you will need to disassemble it first, and then collect it. This process is not a particularly difficult occupation. For work, you will need a screwdriver with the tip of the desired shape.

Everything should be done carefully, observing safety precautions, mainly that the spring does not injure the master if an accident.

Hitachi Brush Cutter / Weed Cutter / Power weeder

Parsing the starting node

They disassemble the launch mechanism in order to install new parts instead of broken in the following sequence:

  • spin a screw with a screwdriver, fixing the pulley with a starter lid;
  • take out a spring and antennae;
  • Remove carefully with the pulley (you need to unscrew the head or work, having dressed the glasses and gloves before);
  • determine why the launch mechanism has broken;
  • If the spring collapses almost completely, then it is replaced;
  • When the spring exits from the hook, it is installed in the original place, bending the antennae before this (the photographs show the laying process);

To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst. Even if you carefully remove the video, then the spring strip flies very quickly from the coil and can injure your hand with its sharp edges.

Immediately putting a springy plate in the same place does not always work. It often slips, so attempts are required to repeat until the desired result is achieved.

Starter assembly

The assembly of the starting node is carried out in a number of stages:

When making the stated manipulations, it is necessary to lay two goals. If this is not done, then the spring over time damage the plastic cup, and when it is pulled. Because of this, a feeling appears, as if the spring had flown. To eliminate such a drawback, you need to install this part of a larger length or an additional goal.

When such spare parts are absent, you can just unscrew the screw a little, and the starter knot will begin to work without shaken. But this option is temporary. it is better to repair qualitatively as quickly as possible.

Spring tension

After installing the spring, it should be pulled. The following actions are performed for this:

  • Remove the handle from the starter cord;
  • Then the rope is inserted into the coil groove;
  • They stretch the spring, rotating the coil in the direction opposite to the clock of the clock arrow (reviews);
  • make the desired number of revolutions specified in the instructions for the use of the trimmer model used and the corresponding length of the cord used;
  • At the very end, the rope is threaded into a hole designed for this, located in the starter cover;
  • put the handle in place, fixing it with a node.

If after the repair the spring continues to fly, then you can get rid of this in the following ways:

  • Squeeze the suitable piece of the plate into the groove at the location of the spring hook;
  • drill holes on two sides of the groove in the coil, into which the spring hook is inserted and fix it using a wire.

Replacing a torn cord

A torn rope is replaced in the following sequence:

  • The old cord is removed;
  • choose a suitable rope (thickness and length);
  • Having reached it through a special hole in the coil, a knot is tied;
  • Sprinkle a spring, producing the required number of revolutions;
  • Fix the pen.

It is better to stretch the spring plate along with the partner so that the edge of the cord does not hit the starter mechanism.

It is easy to assemble a starter on a trimmer and wound a spring, only you should do it carefully and with caution. For different models, the gas tanks of the launching mechanisms are the same, so they are repaired in a similar way. In this case, there are some nuances associated with their constructive features.

Operating instructions for motorcycles Hitachi

Before how to proceed with the use of the lawn mower, all manufacturers recommend familiarizing themselves with the instructions for use. This is a document that is attached to each device and includes the main provisions and warnings regarding the work with the device and the rules for using it.

The instruction manual to the line of benzocosyles and motorcycles of Hitachi includes several main points:

User security.

This provision includes the rules for preparing the operator for work. One of the main requirements are the requirements for user clothes, the availability of protective equipment (special glasses, headphones). As for clothes, it should not be too free and hang out. The manufacturer pays particular attention to the length of the hair (they should not hang over the face). People with long hair are recommended to tie and hide them for a while.

The note! With prolonged continuous work with a motorcycle, white spots can occur. The manufacturer recommends taking breaks during operation.

Working with a motorcycle is prohibited in a painful state, with alcohol intoxication, after taking drugs.

Safety when using:

  • It is forbidden to cut materials that are not provided for by instructions for operation;
  • Before each use, it is necessary to inspect the device and replace the failed parts;
  • After completion of operation, it is necessary to inspect the device and clean it from the remnants of grass and dust;
  • The engine during operation should be on the right side of the body;
  • Working with a benzocosa is not recommended in closed rooms;
  • It is forbidden to put a working product on the ground;
  • When moving to the next working area, you need to make sure that the engine and cutting element are completely stopped.

Maintenance and recommendations for replacing parts.

The manufacturer recommends conducting daily, weekly and monthly maintenance subject to the constant use of the device. It is recommended to use only original components as details. For two.stroke engines, it is necessary to use fuel liquid (gasoline oil). It is recommended to choose oil depending on the engine model. Hitachi offer oil for gasoline and electrical devices of their own production.

The main malfunctions of the Hitachi trimmers and ways to eliminate them

Hitachi produce quality products that have been working properly for many years. Among the main malfunctions of Hitachi trimmers, users distinguish the following:

Conducting timely maintenance can prevent filter clogging. When we wear these parts, they must be replaced.

  • Belts are often torn. If this malfunction occurs, you must contact the service center.
  • The lawn mower does not turn on or works with interruptions.

This malfunction can be associated with the failure of the spark plug and the accumulation of a carbon on it. In addition, the lack of ignition may depend on the quantity and quality of fuel, the serviceability of the trimmer launch system for grass.

The note! If it is impossible to determine the cause of the breakdown of motorcycles, the manufacturer recommends contacting the service center.

Why is the gasoline trimmer not starting for the grass

The reasons why the gasoline trimmer for the grass stopped starting is different, therefore, a phased diagnosis of the apparatus is required.

Fuel tank (fuel quality)

Remember that always before starting the unit, a check of the presence and quality of fuel is required. In this case, you should not be greedy and save, as well as “clever” about the amount of oil added. Everything must be done according to the management attached to the apparatus, since when the piston group fails, its replacement will cost about 70% of the total cost of the trimmer for the grass. Pour fuel due to the fact that you will fully conside it when performing work. After a while, the gasoline remaining in the tank loses its properties and can harm the engine. Therefore, do not prepare the mixture for the future and in large quantities. If the lawn mower starts poorly, try to drain the “old” fuel from the tank, and season it with a freshly prepared mixture.

Important! To refuel the device with fuel, the origin of which is unknown, fraught with negative consequences. Gasoline should be of high quality, bought at a gas station, and its brand should be not lower than AI-95.

Candle and candle channel

So, you changed the fuel, but nothing has changed, and the trimmer for the grass still does not start. In this case, it is worth checking the candle channel: whether it throws it with a combustible mixture. Often users transfer the air damper to the “OFF” position when starting, and when the engine started, they do not transfer it to the “ON” position, after which it stalls. Further, an attempt to start the internal combustion engine to again leads to the fact that it floods the candle with gasoline, and the start becomes impossible. To diagnose and eliminate the possible problem in this node, do the following.

  • It is necessary to unscrew the spark plug, wipe it well and dry it. When installing a candle in the ICE cylinder, it should be dry.
  • Draw from the combustion chamber the fuel accumulated there. This is done through the hole from which you twisted the candle.
  • In the presence of soot on the electrodes of the candle, it must be removed either with a thin file or a nail file.
  • Do not forget to put the gap between its electrodes before installing the parts in place. The gap on the candle should be 1 mm. As a probe to check the gap, you can use a coin.
  • Next, collect the block, read the start instructions and try to start the engine again.

If the engine does not start, then you will need to check the spark. For this:

  • unscrew the candle;
  • put on it a cap of a high.voltage wire;
  • Touch its metal part to the cylinder body (to provide contact, you can insert a tubular key) as shown in the figure below;
  • pull the launch cord so that several engine speeds occur.

Normally, with each piston roll between the electrodes, the candle should slip a spark. If there is a spark, then the reason that the internal combustion engine is not launched should be sought in other nodes of the device.

For a better understanding of the process, how to test the candle for the presence of a spark, you can use this video where the check is shown by the example of the Lawn Mushiel “Soyuz”.

Hitachi/Hikoki CG25SC Grass Trimmer 400W

If there is no spark, then in the beginning check the cable connecting the candle to the coil. perhaps the reason is in it. You can call it with a tester. In case of detection of the rupture of the chain, a high.voltage wire will require a replacement.

Also the reason that the spark has disappeared is a malfunction of the ignition coil (magneto). The figure below shows what the coil (magneto) looks like from the gasoline trimmer for Patriot grass (Patriot).

To exclude the malfunction, it will be necessary to use a tester to check the Magneto trimmer for the grass, namely, its primary and secondary winding. On the primary winding, the resistance should be in the range from 0.4 to 2.0 Ohms. If the device shows 0. this means that there is a short circuit in the winding, and if infinity is a clear sign of a chain break. The resistance on the secondary winding should be in the range from 6 to 8 kOhm.

On some coils, it can reach the value of 15 kOhm.

Air filter

If your lawn mower does not start well or stalls immediately after starting, you should pay attention to the air filter, since it can be clogged, as a result of which the air does not enter the combustion chamber, and fuel ignition does not occur. To check if the filter is the case, remove it and try to start the engine. If he earned, then the reason was found. The filter needs to be replaced or rinse well and dry before installation. In the case when you find the oil in an air filter, it must be washed with gasoline, squeezed well and dry at least 2 hours before installing in place.

If the unit does not start with an air filter, it is still recommended to check the fuel filter.

Fuel filter

This filter cleans fuel of possible pollution. If it is scored, then gasoline does not enter the cylinder, and, accordingly, the unit does not work or stalls after starting. The fuel filter is located at the end of the fence hose, which is located inside the fuel tank. To get to the filter, it is necessary to extract a cork with tubes emerging from it.

When extracting traffic jams, a fence hose can disconnect and stay in a tank. It is extracted with a tweezer.

Next, remove the old fuel filter from the hose and put on it a new, pre.acquired. You can also clean the fuel filter if you do not have new. The filter must be fixed on the hose using a spring latch.

Install the fence tube on the cork and insert the last into the tank.

Electric trimmer for grass vibrates

Many mowing users noticed that some time after the start of the apparatus, it begins to vibrate very much. On some trimmers, mainly in models more expensive, an anti.vibration system was installed in the form of shock absorbers seized between the engine and the bar. But in some cases, even she does not save from strong vibration. The reason that strong vibration appears in the trimmer, there may be a small amount or complete absence of lubrication on a hard or flexible shaft located inside the rod of the apparatus.

Replacing the lubrication of the hard shaft is as follows:

  • Apply a small amount of lubrication to the shaft and evenly smear it along the entire length of the part, including the slots at the ends of the rod (if they worked, the shaft will have to be replaced);
  • After lubrication, insert the shaft back into the bar and put the gearbox in the same place.

The lubrication of the flexible shaft is as follows:

  • unscrew and remove the mowing head;
  • remove the bar from the electric motor by unscrewing a couple of bolts;
  • Pull out a flexible cable from the bar;
  • Lubricate the cable with grease along the entire length.

This is done like this: first you need to lubricate the end of the cable, and then insert it into the bar, after which, as it moves into the pipe, you should apply grease to the part and evenly distribute it on the surface. Then insert a bar with a flexible shaft into an electric engine and fix it.

In the event that the lubricant did not help, and the vibration continues to appear, you will need to change the flexible shaft.

Determination of the causes of the malfunction

If the trimmer engine for grass does not start or stalls immediately after starting, when overheating or during the functioning of the device, extraneous noises are heard and vibration is clearly felt, it is important to perform a visual inspection and identify a non.working node.

  • the presence of fuel in the tank and lubrication in the main nodes;
  • serviceability of the spark plug and its performance;
  • the purity of the fuel and air filter motorcycles;
  • Cutting of the exhaust channel and the device’s saepun;
  • The quality of the used fuel and lubricants.

To determine the functional performance of the ignition of the lawn mower, you should determine whether the candle works by testing the appearance of a spark in contact with the body of the functional device.

The spark plug itself can be changed to a new one, after driving the candle canal, if necessary, the old element is also dried, cleaned with special devices and returned to place.

Repair of the carburetor

If necessary, it is possible to disassemble and thoroughly clean the node with your own hand, using gasoline, cleaning the nozzle and channels is used by compressed air.

How to clean and store a tool?

During the operation of the lawn mower, monitor the state of the engine cooling system. The channels available in the starter housing, as well as the cylinder ribs, should always be clean. If you ignore this requirement and continue to operate the motorcycle, then you can disable the engine due to overheating.

Competent care of gasoline scythe during operation allows you to use it for several seasons in a row without serious repair

Before cleaning, let the engine cool down. Take a brush with a soft pile and clean the outer surface from dirt. Cleaning plastic parts is carried out by solvents, including kerosene, or special detergents.

After the summer season, the lawn mower should be prepared for long.term storage. To do this, the fuel mixture is drained from the tank. Then the engine is launched in order to develop fuel residues in a carburetor. The entire tool is well cleaned of pollution and sent to “hibernation”.

As you can see, it is possible to repair the malfunctions of the household lawn mowed on their own. Service services should be contacted in case of serious breakdowns. In this case, the cost of repairs with the price of a new lawn mower should be correlated. Perhaps it will be more advisable to buy a new tool.

The main malfunctions of the coil

Users of the electrimmer and lawn mower often face a problem associated with a semi.automatic braid head. Coil malfunctions can be as follows:

The fishing line for the trimmer does not extend automatically

If, with a light blow, the trimmer coil button for grass on the ground is not lengthened for a trimmer, then the reasons for this may be the following.

Option 1. there was a snack, t.e. Squeezing the cord between turns. This problem usually appears if the user wound a fishing line for a trimmer to the coil unevenly, with the intersection of the turns, or wound it with insufficient tension. In the latter case, when the mowing head is rotated at large revolutions under the influence of centrifugal force, the cord begins to drag on, as a result of which the interitral clamping of the fishing line is possible. To eliminate the problem, you will have to disassemble the coil on the trimmer and rewind the cord correctly, that is, with even turns with good tension.

Option 2. too short ends protrude from the head. A fishing line for a trimmer may not exit when hitting the ground, if its ends sticking out of the head, insufficient length (short). In this case, the centrifugal force is not enough for the fishing line for the trimmer to stretch. Therefore, it is required to stop the unit (drown out the engine or turn off the ethletric trimmer for grass from the network) and pull the fishing line for the trimmer manually, after pressing the button.

Option 3. a fishing line for a trimmer was soldered inside a mowing head. This leads to the fact that the coil is stopped and does not spin when the button is pressed. Basically, this happens for several reasons: poor quality of the cord, overheating of the coil with prolonged operation of the unit, a fishing line on solid items.

  • In the first case, the cord of manufacturers can be made of low.quality and fusible materials that do not withstand the mechanical and temperature load. Therefore, preference should be given to “branded” fishing.
  • But, if you still purchased a fishing line for a trimmer of unknown quality, and it is often soldered during operation, then you can follow the example of some users who, after refueling the cord, moisten it either with silicone grease (from the spray can) or mineral oil). This procedure greatly reduces the likelihood of soldering a fishing line among themselves.
  • Also, a fishing line for a trimmer can sleep if during a mowing it hit a hard object (stone, fence, dry branch, etc.D.). As a result of this, it is slightly stretched and draws back into the head with high speed. The cord is heated from friction, and its turns are sticking together. The only thing that can be done to eliminate this malfunction is to open a trimmer coil for grass and rewind a fishing line for a trimmer.

The cord spontaneously lengthens

There are situations when a user of a trimmer for grass notices a very fast fishing line consumption. At the same time, he never hit the ground with a button to lengthen the fishing line. The reason that the fishing line for a trimmer spontaneously lengthens, cutting off a special knife on the casing of the device, may be the absence of a spring in a mowing head. Often beginner users of mowers, trying to charge a fishing line for a trimmer into a coil, forget to install a clamping spring in the head, or completely lose it when opening the lid, and in the future, they do not even suspect its existence.

Also, a fishing line for a trimmer can lengthen without using a button if the spring is weakened. If the spring check confirmed this fact, then it is necessary to put several goals under it to strengthen its clamping properties.

How to remove the coil and replace the fishing line for the trimmer

The owners of the trimmers, mainly beginners, confuse, bordering on panic, when it becomes necessary to change the cutting tool or fishing line for a trimmer in a reel. Very often, when trying to unscrew the mowing head, users simply make it unusable, not suspecting that it is unscrewed in the opposite direction. So that this does not happen, if you need to replace the tool, it is recommended to familiarize yourself with the instructions given below.

  • Before refueling the fishing line for the trimmer to the coil, drown out the engine of motorcycles or de.energize the ethletric trimmer for the grass to avoid injuries that may occur in case of accidental rotation of the cutting tool.
  • Unscrew the nozzle mounted on the gearbox shaft. To do this, the shaft must be fixed by combining holes on the puck and on the axis, and inserting a metal rod or screwdriver into them.
  • Unscrew the nozzle. You should know that the thread on the shaft is left. Therefore, to twist the coil of the trimmer for the grass should be right, that is, clockwise.
  • Disassemble the mowing head. Most often, the head cover is attached to the fixers. To remove it, you need to drown these latches into the case, pressing the edges of the lid. If your trimmer has a semi.automatic mowing head, which has a button from below, then disassembling the nozzle should be done carefully, since you can lose a spring that sometimes flies away when removing the cover.
  • Cut the required amount of fishing line. Usually its length is 5 meters. Use the cord of the diameter that is indicated in the instructions for the tool. It is not recommended to exceed the maximum diameter of the fishing line, since this will lead to increased load on the engine and greater consumption of gasoline.
  • Find the middle of the segment of the cord, folding it in half. You will get a loop.
  • Special grooves are cut out inside the coil (there may be holes). Insert the loop from the fishing line into this groove.
  • Wind a fishing line for a trimmer to a coil, turning it counterclockwise. You need to refuel the cord as evenly as possible, the turns should be laid without ceiling and with good tension. When the winding is finished, leave the free ends of the fishing line about 20 cm long and fix them in the grooves located on the sides of the coil.
  • Collect the braid head. Before you finally collect the nozzle, do not forget to insert a spring and washer (if it is available). Install the coil in the case, and prone the ends of the cord through the holes or eye.
  • Dress the lid and fix it with latches.
  • Screw the nozzle back to the gear shaft, also fixing it with a screwdriver. Tighten the coil of the trimmer for the grass will need to go to the left (against h. Arrows).

TOP-4 Best trimmers for Hitachi grass (Hitachi) according to technical characteristics: price, reviews, video

The Hitachi trimmers line are constantly replenished with new modifications that are popular in many countries of the world. Trimmer for grass gasoline Hitachi is highly performance and long.term operation.


Hitachi CG22EAS-NB is designed to mow grass in a small area. You can install different types of cutting tools (fishing line for a trimmer, knife), this makes it possible to download both young grass and dry shrub. The device is equipped with a New Purefire exhaust cleaning system, which increases the environmental friendliness of the model. Low fuel consumption makes it possible to work for a long time without adding fuel.

  • Engine power. 0.86 liters.With.
  • Engine volume. 21 cm³.
  • The volume of the fuel tank is 0.44 liters.
  • The drive shaft is hard.
  • Carburetor. Walbro.

The handle has a convenient shape. The engine is located on top, which allows you to work even after rain, when the grass has increased humidity. The device is equipped with a S-START launch system, so that the start of work occurs smoothly, without jerking. The device has a small weight of 4.4 kg, which allows you to control the device even to the child. Reliable casing protects the driver from injuries. The model is equipped with a removable gearbox.


Hitachi CG27EJ-S mower is characterized by compact dimensions, small weight. The device has a comfortable bicycle handle designed for cutting grass. This model is equipped with a 1.1 liter gasoline engine with a capacity of.With. The movement of the braid is not limited to the length of the wire, so the device can work on a large section. The lawn mower can overcome areas with an uneven surface.

  • Engine power. 0.88 kW.
  • Engine volume. 27 cm³.
  • The engine is two.stroke gasoline.
  • Cutting element: knife, fishing line for trimmer.
  • Field diameter. 2.4 mm.
  • Tank capacity. 0.67 l.
  • Cycling peak type U-shaped.
  • Hard drive shaft.
  • The width of the grass mowing is 46 cm.
  • Landing diameter. 25.4 mm.
  • Dimensions of pigtails. 726x650x600 mm.


The Hitachi CG27EAS-NB gasoline trimmer is used in areas with a small area. The device is equipped with a disk and a trimmer head. The NEW Purefire Innovative system reduces toxic exhausts to 50% and saves fuel. The kit has a convenient belt.

  • Field diameter. 2.4 mm.
  • Engine power. 1.1 kW, engine volume. 27 cm³.
  • The engine is two.stroke gasoline.
  • Fuel tank capacity. 0.53 liters.
  • The weight of the unit is 5.1 kg.

The kit has protective glasses, a knife and a cutting element with a cord. Spare parts for these mowers are available in all workshops, due to which units are popular with customers.


The portable benzotrimmer of the Hitachi CG23ECNB brand is suitable for trimming the lawn, cutting weeds, weeds, and even small shrubs. A wide range of application is available thanks to two interchangeable cutting elements: for grass. a reel with fishing line, for shrubs and weeds. a knife.

The engine of this model is also equipped with a New Purefire system, which provides 20% more power at a lower fuel consumption and a smaller level of exhaust gases, in comparison with traditional 2-tact engines. The unique S-START light start system allows Motokos to always start the first time, reduces the effort when starting twice and prevents the effect of “reverse impact”.

Ergonomic T-shaped bicycle hilt in height, a belly loop with a hook and the low weight of a mowing tool provides lightness and ease of use.

  • Engine type-2x-tact gasoline.
  • Engine power. 0.7 kW (1 liter.With.).
  • The trimmer set for grass. a fishing line for a trimmer 2.4 mm; Disk knife.
  • Speasing width. 25.5 cm.
  • The speed of rotation of the knife is 9990 about./min.
  • Gas tank volume. 0.48 liters.
  • Noise level. 97 dB.
  • Weight. 5 kg.

In addition to the tool itself, the standard equipment includes a disk knife, a reel with a fishing line and a belly with a hook.

Instruction and maintenance instructions

Guide for Hitachi CG27EJ for the operation and maintenance of equipment is intended for people who will use this unit on their site. First of all, it is necessary to follow the safety rules.

The operator should wear goggles, protective clothes, long trousers, boots and gloves while working.

You can not wear free clothes, jewelry, short trousers, sandals or walk barefoot. Girls should not work with loose hair, hair length should be up to the shoulder.

You can not work with poor health, fatigue or after taking alcohol. A trimmer cannot be controlled by a child or a person who has no experience working with the tool. You can not remove safety equipment that is responsible for the immediate stop of the engine. You can not turn on the mower inside the building or closed room, otherwise, when inhaled carbon monoxide, severe poisoning of the body can occur.

While holding your hands away from the cutting tool. Do not capture the device using cutting equipment. With long work, take a break for a while, since vibration can negatively affect your health. If you use any medical electronic devices, such as a pacemaker, then consult a doctor, and also read the instructions for the device.

Before starting work, you need to check the design, replace the damaged parts, check if there is fuel leakage, make sure that all the details and fasteners are in their place and are reliably tightened. Replace the details that are damaged, failed or do not work.

Install only the details that are designed for this model of a trimmer for grass. Do not use a mower for other work, except for those for which it is intended. For gasoline, use the container recommended by the manufacturer.

In no case do not smoke near fuel or working gasoline model of a trimmer for grass. Before starting the engine, it is necessary to wipe all the spilled fuel. Before turning on, you need to move away from the dressing site at least 3 m. After each use of the mower, you need to empty the fuel tank.

When refueling the mowal with gasoline, special caution must be observed, since gasoline is easily ignited, as well as its pairs are toxic, they cannot be inhaled. It is necessary to operate a trimmer for the grass, observing all the above rules.