How Many Fishing Lines Are Threaded Into The Trimmer

I want to devote today’s article to the sore topic of summer residents and gardeners of the entire post-Soviet space “How to refill a fishing line into a trimmer.” Not many trimmer manufacturers answer this question in their operating instructions. Therefore, it is difficult for ordinary gardeners to figure out how to do this correctly.

I want to start with a brief description of the technical characteristics of the trimmers.

So, trimmers are electric and gasoline. The cutting element of the trimmers can be a fishing line and a knife. The fishing line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and four blade blades. Knives are also plastic and metal.

The feed system of the fishing line from the trimmer is manual, semi-automatic and automatic.

Development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the fishing line and the number of knife blades according to the power of the trimmers. Otherwise, the engine is overloaded, which as a result leads to its breakdown. And this is an additional and significant cost.

Today on the market are trimmers:

With one nozzle. Only fishing line. With two nozzles. Fishing line and three-four-blade knife. With one nozzle. Only a three-four-blade knife.

Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacing the fishing line with a metal cable, or fishing line. But at the same time they do not think about the safety of their and their loved ones, because, as a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave it crippled for life. Using fishing line can and gives a better effect, I have never personally tried it than fishing line for trimmer, but this work has a number of inconveniences: when it comes into contact with solid objects it dissolves or can simply be pulled out of the reel without limit.

So what is called closer to the topic. I give an example of how to fill a fishing line into a trimmer (BOSCH Art 30 trimmer). Everything is very simple. We started.

After you have chosen the fishing line for refueling, you need to cut off the necessary amount of fishing line, because all the fishing line in the skein is not wound into a reel.

Cut off and start winding.

Remove the coil and the protective cover from the coil.

They took off. We fix one end of the fishing line into the gap and carefully and evenly wind the fishing line.

The amount of fishing line should be such that the protective cover of the reel closes and the line on the reel unwinds itself a little.

The second end of the fishing line is planted in the hole on the protective cover.

Next, take the coil and the protective cover of the coil. We sink the end of the fishing line from the reel into the metal hole on the protective cover of the reel. Tighten the fishing line a little.

We put it all on the trimmer. Turn the coil clockwise until it clicks.

Secured. Now connect the trimmer to the network. We put the trimmer in the starting position for the job. Turn on the trimmer. The excess length of the fishing line will be cut off on the cutting blade.

READ  How to Reel Fishing Line Lawn Mowers Reel

Trimmer Coil

That’s all starting work.

You can watch the

A little tip. Make sure that the fishing line does not come into contact with solid objects when cutting. With this contact, the fishing line will be cut. And since, in this trimmer, the fishing line is not fed automatically, then you have to stop the work each time, remove the reel and re-release the fishing line.

In my trimmer, in addition to the standard line for mowing the lawn, there is still provided a thick fishing line for mowing coarse weeds. It has the shape of a pigtail, i.E. Three fishing lines are tightly intertwined. Such a fishing line has its own reel.

Thick fishing line

It is stored at the top of the trimmer body.

Spare coil storage space

Installing such a fishing line into the reel is very simple. According to the internal circuit inside the reel. We insert the center of the fishing line with a metal mount at the top of the reel, and draw the ends of the fishing line along the grooves and bring it out.

Reinforced Fishing Line

Such a coil is attached to the trimmer as well as a reel with ordinary fishing line.

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that you can use this technique in places where a regular lawn mower will simply not be able to get because of its massiveness. It is necessary to understand in more detail what kind of trimmers are, and how to choose the best option for a particular summer cottage.

What is a trimmer?

The basis of this equipment is the following elements:

  • An engine whose main function is the rotation of the cutting head at the end of the rod;
  • Directly the head, consisting of a coil on which either a fishing line or a knife can be wound;
  • Knives or fishing line rotating at high speed, which are the main cutting part of the device, about how to charge the fishing line into the trimmer, we will go a little further.

How Many Fishing Lines Are Threaded Into The Trimmer

An electric apparatus is inferior in power to a gasoline one, so it is ideal for working on a standard plot of land that adjoins a house with an electric energy source. The main positive aspects of this technique are the absence of noise during operation, light weight, ease of operation and, of course, environmental friendliness.

As for gas trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. It is not necessary to use electric energy at all, which has a positive effect on the functionality of such an apparatus. The cutting nozzles can be changed while working with the most diverse weeds of their type.

One of the most common attachments is fishing line, so you should dwell on this element in more detail.

READ  Trimmer Does Not Work Under Load

Types of fishing line for trimmers

As a rule, the separation of fishing line is based on a different diameter of the samples, which can vary from 1.2 to 4 mm. The most commonly used material is with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

Here there is one main rule: the more power the device has, the thicker the fishing line should be.

This element can also differ in the type of its section. So, it can have a round (suitable for cutting simple grass) or square (for mowing a soft green cover) shape, sharp edges (tall grass) or it can be equipped with notches that are ideal for thin-diameter grass.

Do not forget that with the help of a fishing line it is allowed to mow exclusively grass, and for other, rougher vegetation, knives must be used.

Next, you should consider in more detail the process of how to insert the fishing line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

How to fill the line in the trimmer?

Any machine for mowing vegetation is necessarily equipped with a coil, which, in turn, may already differ for different models with a filing system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to fill the line into the trimmer.

In order to fill the fishing line into the trimmer, it is necessary to take at least 5 meters of material, which is then folded in half. The center of the cutting element must be inserted in a place specially designed for this, and then, using the visual tips on the reel that indicate the direction, the cutting device should be wound. At the end of all work, the cover, of course, will need to be tightened.

Fishing line adjustment

One of the main rules when replacing and adjusting equipment is that any manipulations with the mechanism should be carried out exclusively with the engine turned off and the plug of the device disconnected from the network.

Perhaps these tips will tell you how to fill the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the type of cutting material necessary for the type and, of course, determine the category of the most used trimmer.

To ensure that the area near the house always looks neat and tidy, you need to cut it regularly. Fortunately, modern technology allows us to solve this problem without excessive physical effort. Electric trimmers are so easy to control and care that even a teenager can mow the grass with their help. The main thing is to figure out first how to refill the fishing line in the trimmer.

How to charge a fishing line into a trimmer?

So, we are faced with the task of properly charging the fishing line into the trimmer. Let’s understand in more detail where to start its implementation and what pitfalls can await us in the process.

Step 1. Choose a fishing line

Step 2. Remove the coil from the trimmer

READ  How To Sharpen The Trimmer Nozzle

To perform this operation, the trimmer must be disconnected from the network and turned upside down with the working head. The further course of action depends on the trimmer model and the design of the coil itself:

  • For small trimmers with a lower engine arrangement, press the keys located on the sides of the coil and remove its upper part from the head;
  • On trimmers with a bent rod, hold the coil housing with one hand, while simultaneously turning the lamb on the housing;
  • For trimmers with a direct boom and gearbox, insert a screwdriver into the hole located under the coil, and then turn the body of the coil counterclockwise.

Step 3. Disassemble the coil

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mowed plot, since there may be a spring inside the coil, which will be difficult to find in tall grass. After disassembly, we will have three parts on hand: a body (top cover), a protective casing and the coil itself.

Step 4. Measure the required amount of fishing line

Novice mowers are usually interested in how many meters of fishing line to wind onto the trimmer reel? There are two ways to resolve this issue:

  1. Unwind a skein of fishing line on a flat, dry place and separate half from it.
  2. Measure 3-4 meters of fishing line from the skein.

In any case, after the end of the winding, the turns of the fishing line should be on the body of the reel without sliding off it. No need to try to wind as much as possible, since the fishing line will be badly unwound and more often torn.

Step 5. Reel the line onto the reel

How to install the fishing line on the trimmer depends on the design of the coil. Consider the option when in the coil body there is one outlet under the fishing line. In this case, the end of the fishing line is clamped in the crevice of the reel, and then we wind the fishing line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After winding up on the reel, it is necessary to put on a protective casing and bring the end of the fishing line into it

If the reel is designed to work with two tails, then the fishing line must be folded in half and laid in a groove in the central part of the reel. Further winding will be carried out in one or two grooves, depending on the design of the coil. The winding direction should also be opposite to the direction of rotation of the coil. At the end of the ponytails, the fishing line will also need to be pulled into the holes on the top of the reel.