How many teeth on a STIHL 180 chain

Sequence of operations when sharpening

Quality teeth sharpness involves strict adherence to the following rules:

  • The file for chain saw sharpening must be perfectly perpendicular to the direction of travel of the saw teeth in the vertical direction and at an angle of 15. 20 0. horizontally. The latter is controlled by the holder.
  • The round file in the throat of the tooth must necessarily be positioned slightly above its edge (for the file it is about 1. 1.5 mm).
  • There is a holder on the tooth whose lines show the exact direction of the file moving horizontally.
  • After several file movements, the grinding surface is covered with magnetized swarf, which must be immediately removed by crocheting.
  • The sharpening begins in the direction from yourself, without applying excessive force: the notches should enter the metal of the tooth gently. It is recommended to make several movements, then rotate the file by 20. 30 0, so that the wear of the cuts occurs more evenly.
  • Sharpening is recommended “through the tooth”: first sharpen the teeth in one direction, and then. in the other.
  • The pressure on the file during grinding should be constant, as well as the number of reciprocating movements along the sharpened tooth.

Read also: What to drill for a screwdriver

Proceed as follows when sharpening the depth gauge. A guide bar is fitted on the limiter. When the stop slot enters the slot of the template, set the height of the worn area, which is removed using a flat file. The arbor is fitted on both sides. Hard or soft, which corresponds to hard or soft wood.

Sharpening will be easier if the chainsaw bar is clamped with metal powder. The sharpening interval can be extended if the chain tension is checked in good time, the condition of the limiter is monitored, all moving parts are regularly lubricated and the drive sprocket is replaced periodically.

Choosing the right saw chain is essential for effective operation. STIHL supplies the optimum saw chain for every application, every power class and every saw manufacturer. All chains are of high quality. STIHL saw chains are made in Switzerland at the STIHL facility in Ville. Chains are manufactured on specially designed and manufactured equipment by STIHL.

You can get professional advice and assistance with your choice of machine from your local STIHL Approved STIHL Dealer.

Manufacturer’s recommended price as of 01.07.2019. The manufacturer’s recommended price within the promotions is not taken into account.

The product range and data may differ depending on the export version. Structural and technological modifications of tools and equipment are possible, as well as price changes.

Key Features

STIHL-180″ chain saws, the reviews of which you should investigate even before buying the tool, have a motor power, which is equal to 1500 watts. It is quite common for craftsmen to ask about the cylinder volume, which is 31.8 cc. see. Fuel tank volume in liters is equivalent to 0.27. The length of the bar can be from 300 to 350 mm. It is very comfortable to work with the tools, because it has a negligible weight, limited to 3.9 kilograms. You might be intrigued by the chain pitch, which is 3/8 inch.

Among the additional functionality can be allocated automatic chain lubrication, lock the trigger, and the presence of the tank for lubrication, the capacity of which is 0.26 liters. Choosing a chainsaw, you should definitely pay attention to additional features, namely: compensator, chain lubrication system, as well as the anti-vibration system. All of these additions are available in the described model.

External signs of blunt-toothed saws

The most popular chainsaws are the tools of the Austrian company STIHL, in particular Shtil-180 (to be exact, STIHL MS-180-14 “). This chainsaw can cut a branch, and branches of average diameter. cope with the power of 1500 watts. Despite the quality steel, which is a trademark (we do not consider Chinese fakes!) Used to make teeth, self-sharpening will require skill and time.

Read also: Brazing solder for copper melting point

Attention should be paid to the following external signs of dulling of the cutting chain:

  • A tapered section appears at the working angle of the tooth.
  • When moving from the working angle to the top surface, the radial rounding differs visually.
  • During the initial feed, even at relatively low intensities, the introduction of the working edge of the tooth into the thickness of the wood is carried out with great resistance.
  • During the steady cutting phase, the chain starts to vibrate and the noise level of the chainsaw increases noticeably.
  • When sawing longitudinally, the cut surface has rough cuttings and wood chips. The chips themselves become much smaller in size.
See also  How much oil to put in your gasoline for your chainsaw

Tested on dry, and in any case not on wood with high humidity. Frequency of sharpening depends on main sawing direction. If it is running mainly in the axial direction, it must be sharpened much more often.

STIHL STIHL 180 chain saw How many links in the chain?

STIHL-180″ chain saws: reviews. STIHL chain saw MS 180 14: costs, reviews, features, description

STIHL-180″ chain saws, which reviews are helpful for you to find out before buying the product, are power tools that are designed for cutting down trees in the home. The tool is powered by an internal combustion engine, and fuel with an octane rating of not less than 90. The STIHL STIHL 180 chain saw frequently has a damaged oil system. STIHL ms 250 chainsaw in the base number of links at such ms 250 chain STIHL (STIHL). You can determine such a malfunction by the dryness of the working chain or the presence of leakage. To work the tool will need oil, which is added to the fuel consistency in the proportion of 1 to 50.

Design features

STIHL-180 chain saws, whose reviews have been reviewed

How to use the table?

The left column shows the most common models of chain saws, in the next. the leading criteria. Find the right modification of the tool, you can within a few seconds know the necessary data on its sawing part, and quickly resolve any disputes.

Parts for chain saws not trimmers with delivery Russian postal service in all regions cash on delivery. SDEC, PEC, Business Line on prepayment

  • Chainsaw parts
  • Cylinder-piston chainsaw groups
  • Other chainsaw carburetors
  • Starters for chain saws
  • Ignition coils chain saws
  • Chain brake covers chain saws
  • Chain tensioners
  • Chain saw clutch
  • Oil Pumps
  • Crankshafts chain saws
  • Saw chainwheels flywheels
  • Chainsaw Bearings
  • Glands not gaskets chain saws
  • Chainsaw Shock Absorbers
  • Other chainsaw parts
  • Chainsaw tank lids
  • Chainsaw mufflers
  • Parts for trimmers
  • Cylinder and piston groups of trimmers
  • Carburetors for trimmers (бензокосторы)
  • Starters for trimmers (бензокоскос)
  • Trimmer ignition coils (chain saws)
  • Trimmer (chain saw) clutch
  • Trimmer (chain saw) flywheels
  • Gearboxes of trimmers (chain saws)
  • Trimmer (Basefitters) Crankshafts
  • Bar ends not handles
  • Oil seals not gaskets of trimmers
  • Mufflers for trimmers (chain saws)

Appearance

Original saw is twisted with asterisk screws. Fakes in 90% either under the flat, or a Phillips screwdriver.

There is a logo on the tank lid. No logo on the fake. Also look at the logo on the screws on the back of the tank.

On the side of the muffler/tyre, the original must necessarily have an identification plate with a serial number that must match the number on the box. A fake has no or poor quality decal and shows signs that the decal will fade over time.

On the body of the muffler on the original saw is engraved product part number.

many, teeth, stihl, chain

Differences in filter elements. Remove the filter cap and compare it with the photo:

Original STIHL Ms saws have a part number on every part, every part is perfect. Counterfeit STIHL Ms saws have mold remnants, imperfections in plastic molding and missing part numbers.

In addition to the differences of the original saw, the following video shows the distinctive features of the chain and bar:

How many teeth are on a STIHL 180 chain saw chain?

Chain saw chain sharpening file. We choose the right one

When actively working on pruning or expanding the area of a homestead plot, a chainsaw should be in the home workshop. Chainsaw teeth, even those of a trusted brand (like STIHL) wear out from time to time and therefore need quality sharpening. In the absence of special devices, a correctly selected chainsaw file can help with this problem.

External signs of blunt-toothed saws

The most popular chain saws are the tools of the Austrian company STIHL, in particular, Shtil-180 (to be precise, STIHL MS-180-14 “). This chainsaw can cut a branch, and branches of average diameter. cope with the power of 1500 watts. Despite the quality steel, which is a trademark (we do not consider Chinese fakes!) Used for making teeth, self-sharpening requires skill and time.

You should pay attention to the following external signs of dulling of the cutting chain:

  • A tapered section appears on the working angle of the tooth.
  • When moving from the working angle to the top surface, the radial curvature is visually different.
  • During the initial feed, even at a relatively low intensity, the introduction of the working edge of the tooth into the thickness of the wood is carried out with great resistance.
  • In the stable cutting phase, the chain starts to vibrate and the noise level of the chain saw increases noticeably.
  • When sawing longitudinally, the cut surface has rough cuttings and wood chips. The chips themselves become much smaller in size.

The test is performed on dry, and in any case not on wood with high humidity. The sharpening frequency depends on the main sawing direction. If it is performed mainly in the axial direction, sharpening must be performed much more frequently.

many, teeth, stihl, chain

What is included in the sharpening kit?

In the absence of a special machine, you will need to use a chain sharpening file (more precisely, not one, but two). You also need a special template with which you can check the current value of the sharpening angle. Thus, the basic set of grinding tools includes:

  • Round file with a diameter of 4.5. 5 mm.
  • Holder with special positioning lines, by means of which the tool can be positioned with the necessary precision on the top edge. The holder has a part that rests on the surface of the cut-off depth limiter.
  • Flat file, which sharpens the limiter itself.
  • Hook, which removes sawdust, is formed during sharpening.
See also  How to Dress a Chain on a Makita Saw

READ Husqvarna 365 chainsaw Adjustment

It should be noted that manual sharpening is effective only when blunt chainsaw marks are set very quickly, and the wear. is relatively small. Otherwise, more complex and expensive specialized machines will be needed. FUG series manual machines are also suitable for the Shtil-180. Their advantage is that you can qualitatively sharpen the teeth, whose wear has been sharply uneven.

Chains for chainsaws, their types and sizes

for chainsaws, their types and sizes. In this video we’ll talk and look at the nailers, find out their types, sizes, so.

STIHL chain saw chain for MS 180

How to correctly count chainsaw chain links

Experts advise to buy a set of these files at the same time as you buy the saw itself, or, as a last resort, in the same store. For a universal file for sharpening chainsaws from different manufacturers does not exist.

How to choose the right file sizes for chain sharpening?

The main difficulty is to determine the size of the round file, because the work performed by the flat tool is much easier. For STIHL saw teeth, the top end of the file must protrude 20% of its working angle surface. Remember, however, that the pitch of the saw chain is usually taken at 0.325.

The next step in choosing is to specify the length of the round file. It depends on its size. GOST 1465 specifies five numbers for this tool, but only number 4 or 5 is suitable as a file for sharpening chain saws. Files have a working length of 200 mm, and 250 mm and 300 mm. As the length increases, the amplitude of movement of the working arms increases, consequently, the quality of the file direction along the tooth increases accordingly. Therefore, a longer file for sharpening is better.

In addition to length, it is important to properly determine the type of cuts available. They can be with sliced or cut teeth. For sharpening better than insulated, because otherwise the cutting angle varies over a wider range of values (70 ± 10 0), which is unacceptable for machining chainsaw teeth.

As a material for the file you need to take the tool steel U13 or U13A in accordance with GOST 1435. Other options for sharpening saw teeth are not suitable.

The domestic tool industry produces a special size line of “Zubr” metal files, which are designed specifically for manual sharpening of chainsaw teeth.

Sequence of operations during sharpening

A quality dental incision involves strict adherence to the following rules:

  • The file for chain saw sharpening must be perfectly perpendicular to the direction of travel of the saw teeth in the vertical direction and at an angle of 15. 20 0. horizontally. The last one is controlled by the holder.
  • The round file in the throat of the tooth must necessarily be positioned slightly above its edge (for the file this is about 1. 1.5 mm).
  • There is a holder on the tooth whose lines show the exact direction of the file moving in the horizontal plane.
  • After several movements of the files, the grinding surface is covered with magnetized chips, which must be immediately removed by crocheting.
  • Sharpening begins in the direction from yourself, without exerting excessive force: the notches should enter the tooth metal gently. It is advisable to make a few movements, then rotate the file by 20. 30 0, so that the wear of the cuts is more uniform.
  • Sharpening is recommended “through the tooth”: first sharpen the teeth in one direction and then. in the other.
  • The pressure on the file during grinding must be constant, as well as the amount of reciprocating motion along the sharpened tooth.

Read also: Pomegranate plant description for 2nd grade

What kind of chain to use for longitudinal sawing

Chain saw users often ask what chain is suitable for longitudinal sawing and if there are chains that are specially designed for this purpose.

At the moment there are no chains especially designed for longitudinal sawing, and most likely there will never be any. к. any saw chain can be used for this purpose. The difference between conventional and longitudinal chainsaws is the sharpening angle.

A dressing machine can be used to turn a conventional chain into a special chain to facilitate rip-cutting. You can find information on exactly how to do this on our website.

ABOUT THE DESIGN OF A CHAINSAW’S CUTTING ATTACHMENTS

First. a few words about the design of the saw chain. All modern saw chains are three-link chains and are designed in the same way. They consist of drive links, connecting links, and left and right cutting teeth (set alternately).

Even though STIHL only makes them out of hard-wearing chrome-nickel steel the cutting links wear out over time. The chain is slid on the bar with a guide groove along which the drive links run. Note that STIHL chains are manufactured with an induction hardened support surface adjacent to the bar to increase wear resistance. The tires have perfect symmetry, so they can be flipped, reversing the bottom and top, allowing the load to be distributed evenly on both sides.

See also  Stihl Won'T Turn On Hot

EVERYTHING YOU NEED FOR THIS ARTICLE IS HERE

The chain is driven by a sprocket wheel, onto which the chain is slipped. every chain is made sure to be pre-stretched during manufacturing, which reduces elongation during initial use to a minimum, increases its service life and reduces wear.

What kind of chain to use for rip sawing

chain saw users often ask which chain is suitable for longitudinal sawing and if there are any chains that are specially designed for longitudinal sawing.

At the moment there are no chains specifically designed for longitudinal sawing, and most likely there won’t be any. к. any saw chain can be used for this purpose. The difference between a regular headset and a longitudinal headset is the sharpening angle.

With a straightening machine, you can make a special chain easier to cut lengthways. For information on exactly how to do this, please visit our website.

Which chain is better than STIHL or Oregon?

Choosing which chain is better, STIHL or Oregon, is difficult because. к. they are of almost the same quality. Oregon as well as STIHL are specialized and invested in the development, continuous further development and production of new models.

If you compare at the user level, Oregon is a little softer, they blunt faster, but they are easier to sharpen with a file. Stihl‘s. almost all are hardened, the metal is hard to sharpen, but holds the edge a little longer.

Interesting. According to experts, the issue of headset quality is relative. many users first lubricate with used engine oil and then say that a particular model and brand of chain is of poor quality, although the cause of premature wear lies in the metal chips that are found in any used oil, even one that has had time to age before pouring.

Scope of application

Carbide chain is well suited, and sometimes even indispensable, for sawing hard and extra hard wood. For example:

  • stained oak;
  • steamed wood, similar in density to bone;
  • Hardwood of the first cut (from the stump), the butt, especially dry and twisted (with twisted fibers);
  • dry wood with strong knots;
  • wood with ice on the surface or contaminated by sand or soil.

Chainsaws with tungsten carbide chains are used for cutting ice for any purpose, including making ice sculptures.

EMERCOM rescue teams routinely use only such cutting equipment, even when they have to remove debris made of ordinary wood. In extreme situations there is no time to keep the chain in good condition. The cutting edge often touches stone, the ground or metal in the wood. An ordinary chain will fail in a moment and needs to be replaced, but in an emergency there is no time for that.

Causes of chain breakage

Sometimes, while working with a chainsaw, the headset can break. It is not a very frequent occurrence, but it does occasionally happen. There are several possible causes for this. The first and most common cause is heavy wear and tear on the chain. While working, the edges rub against the guide bar, causing the metal to gradually wear off and the chain, unable to withstand the load, tears.

Important! The use of quality adhesive oils can significantly extend the life of the saw headset.

The second reason is that the drive sprocket and guide bar are not replaced on time or are replaced separately. According to the recommendations given by the manufacturers, the saw headset, guide bar and drive sprocket should be changed as a set. This will prevent wear, stretching, and breaks due to excessive loads.

Third, it is a sharpening defect when sharpening with a special sharpening machine. The machine disc rotates at high speed, and if the depth of recess is set incorrectly or the machine stroke is increased for some reason, a split second is enough to undercut the edges of the connecting link. If after sharpening it is not checked for quality and cut links, the cut link can break when working under load.

Fourth and last, a rivet defect. A common cause of chain breaks is incorrectly connecting or reusing the connecting links. If you have a torn cutting headset, information on how to connect the chain will be very useful.

many, teeth, stihl, chain

Scope of application

Carbide chain is well suited, and sometimes even indispensable, for sawing hard and extra hard wood. For example:

  • stained oak;
  • hardened wood that is similar in density to bone;
  • Hardwood of the first cut (from the stump), the butt, especially dry and twisted wood (with twisted fibers);
  • dry wood with strong knots;
  • wood with ice on the surface or contaminated by sand or soil.

Chainsaws with carbide chains are used for cutting ice for any purpose, including making ice sculptures.

Rescue crews of the Ministry of Emergency Situations routinely use only such cutting headsets, even when they have to dismantle debris made of ordinary wood. In extreme situations, there’s no time to keep an eye on the chain. The cutting edge often touches stone, the ground, metal in wood. A conventional chain will break down in a flash and need to be replaced, but in an emergency there is no time for this.