How Much Oil To Bred In A Chainsaw

Chainsaw in the view of the townsfolk is a simple tool that is used, and villains from horror films and girls in musics. However, one only has to face the professional use of this tool in practice, myths in the head are dispelled instantly. One of the nuances of its use is gas station. Even in gasoline for Soviet motorcycles, they were diluted with oil, just like for chainsaws. If you are interested in why and how much oil to pour into gasoline for a chainsaw, then you can find the answers in this article.

How is the saw arranged?

In order to properly understand why gasoline for a chainsaw is diluted with oil, you need to understand the device itself.

How Much Oil To Bred In A Chainsaw

Firstly, the chainsaw is powered by a two-stroke engine. That is, in fact, the device is extremely simple in nature. An internal combustion engine and gasoline. However, as a tool, a chainsaw is truly irreplaceable. In addition to the engine, the saw consists of an ignition system, a fuel system, a clutch, a carburetor, an air filtration system, a starter, a chain, a tire, a chain brake, a tension mechanism and a chain lubrication system.

To ensure optimal operation of the device, regular lubrication of its parts is necessary. This will increase both its performance and durability. With chainsaw serviceability, jokes are bad, because this is one of the most dangerous tools.

So, with the device and the need to lubricate the parts of the chainsaw figured out, now you can move to the specifics. For maximum lubrication, use a suitable fluid. We will help you decide.

How to choose oil for a chainsaw?

In order to answer this question, you need to determine the type of your device. For chainsaws that are used in the garden and construction industry, diluting gasoline with oil is an indispensable procedure that increases the efficiency and duration of the device.

So, what factors should be followed when choosing?

Important in the choice of oil for the chainsaw is also the season in which the saw is operated. For example, when operating in sub-zero temperatures, even the highest quality oil may be ineffective due to its crystallization. Therefore, the tool should initially be adapted for use in such weather conditions. For example, the possibility of warming up the carburetor during operation will not be amiss. If the saw is also stored in an unheated room, then it must be warmed up before use.

Many are faced with a dilemma: which oil is better to use. Mineral or synthetic? The synthetic option, as in the case of cars, is more expensive, but does not create carbon deposits inside the device.

We would advise you to choose synthetic oil from the first launch, but if you have been using mineral water for a long time, you cannot change the type of oil. The reason for this is soot, which can fall off and cause damage to the saw.

The amount of oil in gasoline for a chainsaw

After the oil is purchased, it remains to solve the last question: how much oil and in what proportion do you need to add it to gasoline?

First, consider the brand of gasoline, which is used most often. This is unleaded AI-95 or AI-92 gasoline. The specific proportion is most often indicated by the manufacturer of the chainsaw. The most popular proportion is 1 to 50. This ratio is considered optimal for saws with a power of 1.5 kW or more. But besides this, there are proportions of 1:25 and 1:40 for Chinese chainsaws and Panther, respectively.

Keeping the right ratio is very important. With a lack of lubricating fluid, the contacting elements are subject to wear. On the other hand, if you go too far with oil, then the saw will lose in the engine resource.

Do not forget about safety when preparing and filling the mixture. It is extremely flammable. Therefore, preparing the mixture in advance is very unreasonable. All cooked hot is better to immediately send to the tank. The residual mixture in the tank after work should not be stored for more than a few days. Drain them, and work out the remaining gasoline at idle.

We also recommend using a special tank for diluting gasoline, preferably a canister with two necks for oil and gasoline. Plastic bottles, in principle, are acceptable, but have the risk of static electricity, which is fraught with explosion. In addition, plastic bottles can sag in your hands, and you can accidentally spill the mixture on your hands or saw.

Water or small particles must not be allowed into the mixture. Therefore, rinse and dry the canister thoroughly before proceeding with the preparation of the mixture. A mandatory procedure will also be the calibration of your capacity. To maintain a 1 to 50 ratio perfectly, make a note corresponding to volume 51. Observe the proportions. To add small amounts of oil, use a syringe without a needle. Keep the syringe free from dust.

At leading brands you can find special cans and dispensers that make the preparation of the mixture and its storage as safe as possible.

In conclusion, I would like to say that a respectful attitude to work and a working tool is the key to a successful craft. That is why the proper preparation and use of a mixture of gasoline and oil for chainsaws can be considered an indispensable procedure for a responsible worker.

What benefits can a tool take? Firstly, long-term work with the characteristics declared by the manufacturer. Secondly, stability and serviceability. The latter should be especially interesting for the owners, because with the failure of the tool, time and unnecessary means are lost.

What should be a mixture of gasoline and oil? To prepare it, you will need containers, unleaded gasoline with an octane rating of at least 92 and a lubricating fluid. In most cases, a simple motor or transmission oil is suitable, but the saw will show maximum efficiency when using branded oil. Dilute the mixture, and with a special washed canister, avoid the ingress of water and dry particles. Thanks to these rules, a chainsaw will serve you for many years.