How Much To Pump Wheels On A Tiller

Choosing wheels for Neva tillers

much, pump, wheels, tiller

  • Features:
  • Views
  • Will other wheels fit?
  • Installation
  • Tips for choosing
  • Recommendations for use

To power the Neva tiller, you cannot do without good wheels. They come in different types, are made independently or purchased from the manufacturer. The efficiency of the technique largely depends on the quality of such a working unit, so the user should learn in more detail about the types and purpose of wheels.

Installation

Installing homemade wheels on the tiller is a snap. First, a weighting agent is placed, which gives the necessary grip to the ground. The chassis of the “Zhiguli” is taken as a basis. The whole process can be represented in the form of the following stages:

  • work with a semi-axle that needs to be installed;
  • remove the tire;
  • weld on spikes, the distance between which should be from 150 mm;
  • fasten everything to the rim using bolts;
  • disc change.

They screw everything to their native hubs on the tiller, for this you can use a cotter pin.

Features:

On the market, wheels from Tiller “Neva” are presented in two large groups:

  • made of metal;
  • pneumo.

The user should select wheels based on the model and the work that will have to be done. Pneumatic wheels are very reminiscent of the usual ones, which are used to seeing on vehicles, while metal ones have received a different name in professional circles. “lugs”.

Lugs are necessary when it is very important that the vehicle has good grip on the ground. Extension cords are often used with them, which help to find out the track width.

There should be hubs on the lugs, thanks to them, you can create equipment with excellent cross-country ability, regardless of the type of soil. First, a metal wheel is mounted on the axle shaft, then a conventional wheel is mounted on the hub.

Pneumatic wheels for tillers “Neva” have 4 elements in the design:

  • tire or tire;
  • camera;
  • disk;
  • hub.

They are placed on the gearbox shaft, the spikes should be directed in the direction of travel. In our country, such wheels are represented by four models.

  • “Kama-421” can withstand a possible load of 160 kilograms, while the width is 15.5 centimeters. The weight of one wheel is almost 7 kilograms.
  • The L-360 model is lighter, although it looks almost the same. 4.6 kg. From the outside, the diameter is 47.5 centimeters, and the maximum load that the product can withstand is 180 kg.
  • The support wheel “L-355” weighs the same as the previous model, the maximum load is also the same as the outer diameter.
  • “L-365” is capable of withstanding 185 kilograms, while the outer diameter of the wheel is only 42.5 centimeters, and the weight of the structure is 3.6 kg.

Metal wheels or lugs are used when it becomes necessary to increase tractive effort. They are also supplied for sale in several types:

  • wide;
  • narrow.

If the work is carried out with a plow, then wide ones are the best option. They are also used when vehicles have to drive on wet dirt tracks. Each wheel is advised to be loaded with an additional weight of 20 kg.

Narrow wheels are necessary for hilling when plants are 25 centimeters or less.

Traction wheels “Neva” 166, 50-8 are necessary if the tiller is used as a tractor. There is no chamber inside, so there is no fear that the wheel may burst due to a heavy load or because it has been pumped over. Inside, the pressure is close to two atmospheres.

There are restrictions on the load that can act on one wheel, and this is 280 kilograms. The total weight of the whole set is 13 kilograms.

Wheels 48 are characterized by a small diameter and low pressure inside, so they are best mounted on a trailer. They are short, but wider than some other types, so they are great for transportation.

Metal “KUM 680” are used during hilling. Among the features, one can distinguish a rim with a solid surface and spikes, the length of which is 7 centimeters. They are located at an angle, so they lift and turn the ground while moving. If we take the diameter along the rim, then it is 35 centimeters.

“KUM 540” have a significant difference from the previous model. a non-continuous rim. The spikes are V-shaped, so not only they sink into the soil, but also the rim. On the hoop, the wheel diameter is 460 mm. The only drawback of such lugs can be considered the absence of an extension cord, since they are not sold in the standard version.

The “H” wheels can be praised for their impressive height and width. They are best used when plowing frozen soil. The track width is 200 mm, there are spikes on the surface that perfectly enter the ground and lift it with ease. Their height is 80 mm.

The same lugs, but designed for plowing the field, are equipped with a long sleeve. Track remains 650 mm wide.

There is an iron model mini “N”, which has a lot in common with the “KUM”. Wheel diameter 320 mm, width 160 mm.

There is a mini “N” for hilling. Such metal wheels differ in diameter, which is 240 mm, if we take into account the hoop. Spikes only 40 mm.

Tips for choosing

  • Not all wheels can be put on the Neva Tiller. Large ones will not fit well, it is very important to observe the diameter. Homemade ones are suitable only if they were taken from Moskvich or Zhiguli and adapted well.
  • When buying, the user should know that when using a trailer or in the case when the tiller is used as a traction technique, metal wheels will not work, they will ruin the asphalt surface, so they put pneumatic.
  • You should always consider what the main purpose of using a tiller is. If you plan to plow virgin soil, then wide models will help, which will also be indispensable when digging up potatoes.

Will other wheels fit?

Other wheels can be put on the tiller. Zhigulevskie sketches from Moskvichs are also perfect. The user doesn’t even need to change anything. If we take into account the diameter, then it repeats the original wheels exactly. You will need to use welding to bring the element to perfection. The advantage of using such pneumatic wheels is their cost, since the original ones are much more expensive.

But the wheels from the Niva car should not be used, since they are too large.

The first thing that will be required is to make the structure heavier. To do this, a semi-axle is placed inside, metal plates with holes are placed on it. A cap is installed on the outside, which will protect against damage from the outside. The camera is removed as it is unnecessary. To improve the traction of the wheels, you can put a chain on them.

READ  DIY snow removal nozzle for tiller

Recommendations for use

Experts advise not to treat the technique carelessly, because then one should not expect stable work from it. And a few more useful recommendations from professionals.

  • Weights are an integral part of the design, since without them it is difficult to provide the necessary adhesion to the surface. The load exerts additional pressure, it is important when using metal wheels.
  • It is worth regularly inspecting the equipment, checking the tire pressure so as not to encounter a breakdown during transportation.
  • If nails, stones and other foreign objects get stuck in the lugs, they must be removed manually, like plants, dirt.
  • When one wheel is spinning and the other is in place, the equipment cannot be operated in the hope that after a few meters it will work as expected, this will lead to more serious damage.
  • When you need to estimate the track distance, you need to install an extension on the right and left wheels.
  • You can also unlock the wheels yourself using bearings, but it’s better to just monitor its condition.
  • If an unpleasant odor appears, if the wheel becomes noticeably jammed, then the technician urgently needs to be sent to the service center, and do not use the tiller.
  • To correct the position of the plow, the technique must first be set on the lugs.
  • It is recommended to regularly lubricate the moving parts of the wheels to keep them intact.
  • The type of wheels used should not be loaded more than that recommended by the manufacturer.
  • If foreign elements get stuck in the lugs, they need to be cleaned, but the tiller’s engine must be turned off.
  • You need to store the wheels in a dry room, so they will last much longer.

How to install wheels from a Muscovite on the Tiller “Neva”, see the next video.

mini tractor me Pani wala pump fitting kayse karte he vo dekheye

Diesel tiller Proton MB-80 / D
4.5l.s, 2 forward / 1 back, grip-90 cm, depth-15-30 cm, 75 kg

  • Description
  • Reviews
  • Delivery

Description Diesel tiller Proton MB-80 / D

Features Proton MB-80 / D

  • The diesel tiller Proton MB-80 / D is capable of fully cultivating the land. from cultivation and planting to inter-row works, hilling, harvesting of various crops;
  • Tillery Proton can be operated throughout the year. in spring and summer to carry out earthworks, pump water, mow thick grass, move loads all year round, clear snow in winter;
  • a tiller with a diesel engine has a large tractive effort compared to gasoline engines, it works much better at low speeds;
  • Cutter blades with a speed of 150 rpm, allow for fast and high-quality soil cultivation;
  • The processing width is up to 90 cm in one pass;
  • Rubber wheels, rigid frame in combination with a gearbox when using a special trailer, make it possible to move loads at speeds up to 10 km / h;
  • Large-capacity fuel tank allows you to work without interruption for about 4 hours;
  • The steering column with the cultivator controls placed on it is adjustable in height, which makes operation more comfortable;
  • Adjustable steering column;
  • Reliable diesel engine with high tractive effort;
  • Gearbox: two speeds forward and one reverse;
  • Rubber wheels for transporting and using trailed equipment;
  • Hitch and hiller as standard;
  • Cast iron lithium gear housing with easy access for service equipment

Delivery set Proton MB-80 / D

  • tiller;
  • Cutters;
  • Rubber wheels;
  • Hiller;
  • Coupling for the installation of additional attachments;
  • User’s manual;
  • Cardboard box.

You will receive additional information about the Proton MB-80 / D tiller by phone (044) 223-52-67, after consulting with our managers.

Delivery throughout Ukraine: Kiev, Dnepropetrovsk, Kharkov, Lvov, Odessa, Donetsk, Simferopol, Poltava, Sumy, Ternopil, Rovno, Zhitomir, Zaporozhye, Ivano-Frankovsk, Kirovograd, Lugansk, Lutsk, Vinnitsa, Cherkassy, ​​Chernigov, Chernivtsi, Nikolaev. Uzhgorod, Kherson, Khmelnitsky and other cities of Ukraine.

Recommended pressure in the wheels of the trailer and the rules for its control

Remember, the recommended pressure in a tire of a heavy or light trailed structure is determined only by the manufacturer. Therefore, the admissible head values ​​are displayed in the technical data sheet of the trailed structure. There are two numbers in this document: the head in the tires for single and double placement on the axle.

In most cases, the car wheel is inflated to 2-2.1 atmospheres. The same applies to the tires of a light trailer. However, the pressure in the wheels of the tiller trailer can be significantly less. For example, a cargo trailer for a car or a tiller model UAZ-8109 (Ishimmashzavod) allows only 1.1 atmospheres. The Skif-500 and Skif-700 models are designed for the same indicator.

The pressure in the tires of the boat trailer does not drop below 2 atmospheres. However, the boat trailer model 81771A of the Moscow plant of special vehicles allows a pressure of up to 2.1-2.4 atmospheres.

Trailer model classification

According to the generally accepted classification, a trailed structure for a passenger car (tiller, mini-tractor) can be:

  • light. this class includes universal models designed for the carriage of goods weighing up to 750 kg;
  • heavy. this category includes special trailers for trailers of mini-tractors and cars that carry loads weighing 750 kg and more.

In addition, trailed structures are universal or special. On universal models, you can carry anything. Special options are designed for a specific type of cargo, so they include:

  • boat trailers;
  • models for transporting large animals;
  • dump trucks;
  • residential modules on wheels;
  • platforms for transporting cars, beehives, motorcycles;
  • mobile retail outlets.

The pressure in the trailer tires depends on the load capacity and the design format. In addition, it is influenced by the ambient temperature, the type of suspension, the design features of the drawbar.

What pressure should be in tires for a trailer

The safety of all road users and tire life depend on the correct answer. After all, over-pumped wheels can burst on the move, provoking an accident, and flat tires are erased around the edges in a couple of seasons. And if you have a passenger car (mini-tractor or tiller), you should read this article and find out the control rules, as well as the permissible tire pressures of a single-axle or two-axle trailed structure.

How to measure pressure and other tips for using wheels

The tire pressure can be checked at any service station. In addition, this can be done with a pressure gauge by connecting the device to the tire nipple. If you do not want to check tire pressure for money or fiddle with a pressure gauge. buy a simple display system (caps with labels) or a full-fledged controller connected to the car computer wirelessly. Using these devices, you will be able to control the amount of atmospheres in the tire with any frequency.

READ  Remake Ant Engine From Tiller

Why do this? Primarily to extend the life of the tread. If you pump a tire, the tread will wear off in the central part of the contact patch. If you carry loads on a flat tire, the tread will wear off along the edges of the contact patch. In any case, the wheel will last no more than three years (and not 4-5, as stated in the passport).

In addition, to extend the life of the wheels, you need to think about the appearance of the trailed structure and the speed of the hitch. If the operation of trailers for a trailer does not allow a load of more than 500 kg and a speed of more than 80 km / h, do not try to carry a heavier load in the box. And under no circumstances should you accelerate above the speed limit. Otherwise, the structure will fall apart on the move or push the car into a ditch, using the force of inertia when passing a sharp turn.

Please check with the respective dealer for the terms of each valid promotion. The materials presented on this site are for informational purposes only and are not a public offer in accordance with Article 437 of the Civil Code of the Russian Federation

How much to swing the wheels in winter

The quality of your bike ride does not depend on what kind of bike you have and the experience of riding it, but primarily on the tire pressure. It is this factor that determines how easy it will be for you to move on asphalt, mud, mountainous terrain, or on loose snow or ice when it comes to skiing in winter.

There are several main features to consider when pumping air into the wheels of a bicycle. Among them are the following factors:

  • The higher the atmosphere of the tire, the greater the roll-off: it is relevant for road and road bikes, on which they travel long distances on the asphalt at a good speed;
  • Too high tire pressure can cause breakdown in the rubber;
  • Too low can also cause tire breakdown;
  • Moderately low pressure will prevent tire punctures on bumpy terrain, great for rough terrain.

That is, the fact how much to swing the wheels depends entirely on what type of riding you practice. Remember that there should always be a pump at hand. it will help to adjust the tire atmospheres as much as required if the terrain under the wheels has changed dramatically and for a long time.

How much to pump the tires also depends on the parameters indicated on the tires. On the rubber, you can find the marking of the permissible tire pressure range in bars, pascals or Psi.

How many times a week should the wheels be pumped? Experienced cyclists say that up to 23 times, because the air is constantly poisoning both through the nipple and through the rubber itself, so the tire pressure must always be maintained at the desired value. You can find out how much your rubber has drained using a pressure gauge. it is often built into the pump. The device will show how much current pressure in the wheels.

There are certain standard values ​​for how much to inflate the wheels of a mountain bike, depending on the weight of the driver:

  • If you have a road bike, then the tire atmospheres should be slightly higher, but only if it is not too hot outside.
  • If your weight is higher than shown in the table, add 1% pressure for each kg.

How much to swing the wheels in winter? It is very important to adjust the tire pressure according to the season and temperature fluctuations. And if in the summer it is better not to pump the rubber with too much air, then in winter, when the temperature drops below zero, on the contrary, it is recommended to raise the level of Pascals or tire bars above the maximum. this will have a positive effect on the functionality of the rubber tread, especially studded tires.

This is a rough answer to the question of how much to pump air in the tires of the bike. Always consider the operating conditions, what is the air temperature, your weight and the type of tire installed, and do not forget to occasionally pump air into the wheels. Once air has been pumped in, move the bike forward and backward to distribute it evenly inside the tire.

How to calculate the correct tire pressure?

Calculation: (3.5 / 475kg) multiplied by “Economy load” (for VAZ = 350kg.) (Specific “AUTO”). 2.6 kgf / cm 2 = “working pressure” (rear wheel). It is necessary to take into account the weight distribution of the car along the axles (for VAZ-2101): (47% 53%), it follows that the pressure in the front wheel will be: (350 kg.

How much to pump tire pressure r15 in winter?

How many atmospheres should there be in the wheels in winter?

When “re-shoeing” the car into winter tires, the wheels must always be pumped at least 0.2 atmospheres higher than the recommended one. So we compensate for the pressure drop in them due to cold. But this level should not be greatly exceeded either.

How many PSI are in tires?

Pressure can be measured in bars or PSI. One bar equals 1 atmosphere (1 Bar = 1 Atm) and PSI equals 0.068 atmospheres (1Psi = 0.068 Atm). Thus, in order to convert the value from Psi to bars (atmospheres), the figure must be multiplied by 0.068.

How much to pump tire pressure?

Recommendations from car and tire manufacturers

To summarize, for most passenger cars the recommended constant tire pressure ranges from 2-2.5 atmospheres. This is the norm not only for a comfortable and safe ride, but also for fuel economy.

How much should the pressure in the wheels be at 14?

It is generally accepted that the pressure in tires r14 or tires of any other radius should be within 2-2.2 atmospheres. And at full load up to 2.4.

What pressure should be in the tires of an electric scooter?

Recommended tire pressure Load, kg Recommended pressure, PSI Recommended pressure, atm Front wheel Rear wheel 50-7035-402.72-3.4070-9040-453.06-3.7490-10045-503.5-4.0 One more line

READ  What Can Be Done From A Tiller

How many atmospheres are in the wheels for 15?

So, for example, in a 195 / R15 tire in summer or winter, the air density on the front and rear axles should be 2.3. 2.6 atmospheres. In winter, you can swing the wheel to the upper reading. Recommended pressure before, atm.

What pressure should be in tires 225 65 r17?

atm. The pressure in tires 225/65 / R17, 225/60, 235/65, 215/55 in winter should not differ from the pressure suggested in the instructions by the car manufacturer. For example, for a Kia Sportage car with 225/60 / R17 tires, the air density in the wheels, on the front and rear axles, should be 2.3 atmospheres.

How much should the pressure in the wheels be at 14?

It is generally accepted that the pressure in tires r14 or tires of any other radius should be within 2-2.2 atmospheres. And at full load up to 2.4.

What tire pressure should be on a gazelle?

According to statistical surveys, experienced owners of a Gazelle car set the tire pressure at around 3-4 atm. The indicator is selected based on the conditions. For loaded vehicles, a pressure of 3.5-4 atm is considered normal. For a Gazelle with a half-empty cabin, a pressure of 3 atm is sufficient.

What pressure should the tires on the car?

The amount of pressure depends on the size of the tires, on some cars the recommended pressure for the rear and front wheels differs. To summarize, for most passenger cars, the recommended constant tire pressure ranges from 2-2.5 atmospheres.

What is the maximum tire pressure?

The maximum pressure in the tires of the car is allowed up to 3.2 atmospheres.

How many PSI are in tires?

Pressure can be measured in bars or PSI. One bar equals 1 atmosphere (1 Bar = 1 Atm) and PSI equals 0.068 atmospheres (1Psi = 0.068 Atm). Thus, in order to convert the value from Psi to bars (atmospheres), the figure must be multiplied by 0.068.

How to calculate the correct tire pressure?

Calculation: (3.5 / 475kg) multiplied by “Economy load” (for VAZ = 350kg.) (Specific “AUTO”). 2.6 kgf / cm 2 = “working pressure” (rear wheel). It is necessary to take into account the weight distribution of the car along the axles (for VAZ-2101): (47% 53%), it follows that the pressure in the front wheel will be: (350 kg.

How much do you need to inflate wheels on a car in winter?

When “re-shoeing” the car into winter tires, the wheels must always be pumped at least 0.2 atmospheres higher than the recommended one. So we compensate for the pressure drop in them due to cold. But this level should not be greatly exceeded either.

TOP 10 tillers. Rating for 2019

The tiller is such a convenient and versatile unit that recently more and more Ukrainian farmers prefer it. It is functional and versatile. Not only will he complete the entire list of unthinkably difficult field work, but he will also transport the cargo to the right place. At the same time, you can load on a grand scale. 2-3 times more than the weight of the machine itself. And for rural roads, such a mini-tractor is just that. Spends a little gasoline or diesel fuel, travels quite quickly, is unpretentious in maintenance.

Among the huge variety of such equipment, every farmer thinks about which tiller to choose. He must:

  • be functional and comfortable at work;
  • work with all kinds of attachments;
  • have a reliable and economical engine.

It is these models that always occupy the first places in the sales ranking. Choosing them, we carefully analyzed:

We offer you an excellent ten tillers that sell better than others, and you yourself decide which one is better to choose for solving your problems.

Hyundai T 1050

The powerful cultivator is designed for processing various soils, cultivating plots, vegetable gardens, lawns, sowing, fertilizing, as well as for transporting goods. Productive, economical. The gearbox has two forward speeds and one reverse, which makes it easy to maneuver and quickly work on large areas with difficult terrain. The transmission is chain, reliably protected from dust and moisture and possible breaks. The motor is original from the manufacturer, a special industrial series, the need for maintenance is reduced due to technological innovations. Power. 7 hp, resource increased to 3500 hours. Steel cutters, curved, penetrate into the hardest soil, including unplowed soil. Protective discs are installed on the sides, thanks to which the plants are not damaged by the sharp cutter. Control handles are raised and locked at the desired height.

  • Installed a proprietary engine of the latest generation from the Hyundai brand with an OHV overhead valve system, economical in fuel consumption and stable under loads;
  • The chain transmission has an efficiency of 95%, so the losses in the transmission of torque to the cutters are minimal;
  • Reversing increases the flexibility to maneuver. Forged steel cutters are suitable for cutting virgin virgin lands;
  • Ergonomic handles, adjustable in the vertical plane;
  • There is a possibility of installing hinges and lugs.