How To Assemble A Chanterelle Rotary Mower
Homemade devices
If necessary, you can make a rotary mower for a tiller and a mini tractor with your own hands. To make equipment for a tiller, you will need a welding machine, fittings, tape measure, metal corners.
The frame of a homemade rotary mower for a tiller is made of metal corners (4×4 cm). Then the bearings are installed. The next step is to manufacture the working part of the apparatus.
The resulting structure will chop small grass and mow tall weeds. Do-it-yourself Neva rotary mower for a tiller is made of 2 discs taken from a seeder, a gearbox and a chain from a chainsaw.
Each disc will require 4 knives. Cutting elements are made of hardened metal. To install them, drill holes with a diameter of 6 mm. The cutting elements are fixed to the tiller with a shank. At the same time, the gap between these elements is maintained (1-2 mm).
This design ensures fast mowing of grass.
In the photo Simple rotary mower for a tractor with your own hands
During the operation of the tiller with a rotary mower, it is possible to rotate the knives by 360 degrees.
The axis of the apparatus is made of carbon steel with a diameter of more than 8 mm. To make the knives move freely, the axle is tightened with a disc. The discs are mounted on the frame, linking them to the drive. The discs must rotate opposite each other (to ensure that they are folded into rows of cut grass).
Rotary Mower Specifications
Experts classify the units under consideration into the following types:
- devices that mow and lay grass in swaths;
- devices that mow and lay grass in windrows;
- rotary mowers for tiller, which mow and chop the grass.
Some models submerge, flatten the grass while mowing and laying in the swath. Taking into account the installation method, experts distinguish such devices as trailed, semi-mounted and rotary mounted mower.
The device in question consists of a rear, front and side cutting system. Apparatus with 1, 2, 3 or 5 bars are installed on the tractor. The rotor scythe is launched by the action of the shaft or the wheels of the tractor.
In the photo Rotary mower for a mini tractor
The considered units are installed on the tractor and the trailer in a horizontal position. The knife and connecting rod must move in the same plane. For work on a small plot of land, a Polish tractor mower is used. Front mounted model divides the land into corrals.
Before buying a rotary mower for a tiller, the principle of its operation is studied. If it is necessary to mow sown high-yielding and lodged grasses, weeds, then a rotary apparatus is used. Such a mower fixes itself to the tiller or tractor. The equipment consists of a bar to which the knives are attached.
The device with a grinder consists of a rotor, frame, drive mechanism, pipeline. The principle of operation of a rotary mower on a tiller: when the machinery moves, the vegetation is tilted with a shield, then mowed with a knife. The grass rises, is crushed, falling into the container.
If it is necessary to quickly cultivate the land, then a Polish mower for a tractor or tiller with several cutting elements is used. Experts recommend buying such devices taking into account the following criteria:
- cutting height of the grass;
- performance;
- knife speed.
Plus a rotary mower for a mini tractor. the presence of a damping device that protects the knife from various obstacles. Experts refer to the additional advantages of the device:
- easy to operate;
- high security;
- saving time.
How to make a rotary mower with your own hands
The rotary mower is selected taking into account the characteristics of the cultivated land. Models for tiller and mini-tractor differ in transportation methods, dimensions, functionality. Any rotary lawn mower is designed for mowing grass.
Model range of units
The rotary tiller mower can be presented in the following models:
- Zarya. installed using a gearbox and additional brackets. The device is used for mowing grass, small bushes and grain. The width of the structure is 70-80 cm. If necessary, the device is used when processing stony soil;
- “Dawn 1”. used for soil cultivation in a hard-to-reach place;
- “KNS-0.8 Strizh”. allows you to mow grass 2 m high;
- “KM-0.5”. compact model with a cutting width of 50 cm.
Models of rotary mowers for mini tractors:
- Z083 MINI. designed for mowing grass in a large area. This model is not used on mountainous terrain;
- DM 135. Mows and mows the grass. The model is equipped with 8 knives;
- “KP-2.1M”. a mounted rotary mower for mini tractors allows you to work the land with solid objects;
- Z-069 Wirax. Polish model, with which you can process a large area. The grass is mowed and laid in swaths;
- KRN-2.1B. mows the grass in a difficult area;
- SB-1200. semi-mounted model of Czech production. With this mobile structure, you can repeat the topography of the soil.
Pictured Mower for tractor Z-069 Wirax
Additional work
To improve the tiller, you can make an adapter yourself. This small trailer functions as a cab with the option to mount a mounted rotary mower. the tiller is controlled by turning the knobs. The handlebar length is taken into account before making the adapter. The axle of the trailer is made of suspension elements of a sidecar from a motorcycle. Experts recommend making an axle from a steel angle 40x40x2. Square pipes are welded to reinforce the adapter.
A homemade rotary mower for a mini tractor is made by hand using old iron batteries and a barrel. The device consists of cutting elements, a casing and a frame. The rotary mower slides on the ground with the lower discs.
In the photo, a mower for a tiller with your own hands
To make a frame, 40 cm corners are used. The unit is equipped with knives from an old rotary mower. If a Polish model is used, then it is necessary to shorten it by 3 cm.Otherwise, there will not be enough traction for the mini tractor.
2 disks with a diameter of 39 cm are cut from a metal sheet 4 mm thick. Knives are fixed to them (they must rotate freely). In the process of movement, under the influence of centrifugal force, the cutting elements will mow the grass.
For the manufacture of the lower supports, discs from a cultivator (diameter 45 cm) are used. The shafts can be made from a metal tube with a diameter of 30 mm. The device is equipped with 2 bearings:
- the first is installed in the pipe;
- second. in welded pulley.
A disc and knives are put on the shaft. The pulleys are welded to the pipe. The resulting structure allows you to capture an area 110-115 cm wide. The shaft turnover is 1400. A casing is mounted on the apparatus. At the junction of the mower with a mini tractor, it is recommended to install a bearing to extend the life of the belt.
To simplify the design, experts advise welding the lower disc to the frame. Unit speed. 10 km / h. At the same time, the grass is cut with a height of 5 cm.The resulting rotary mower is used for harvesting corn.
Tools
Unfortunately, most owners of trailers and mini tractors do not always use them to their full extent, and in order to mow the lawn or field they hire other equipment. Although, it is quite possible to do this with a rotary mower. The cost of such a tool is prohibitively high, so it is much more profitable to build it yourself. How to make a rotary mower from improvised means, we will consider further.
Rotary mower do it yourself
The design of a home-made rotary mower for a mini tractor includes knives that ensure mowing of grass. The knives are fixed on a special disk device. A power shaft is used to provide movement. Sliding the mower on the surface of the ground is carried out using the lower discs.
For the manufacture of a welded frame, use corners, it is possible to use old scrap metal. To save time on making knives, use an old rotor from a tractor. But, in this case, in order to improve traction and make the mower more efficient, the tractor rotor should be shortened by a few centimeters from 2 to 4, depending on the power of the mini tractor. This mower model has a cant height of no more than 350 mm.
For self-construction of the rotor, you should take a metal sheet and cut out two circles from it in the form of disks, each with a diameter of 390 mm. To save on the purchase of a metal sheet, it is possible to use the bottom from an old barrel. Legs are welded to the discs in the center, ensuring their rotation. Due to the influence of centrifugal force, the process of mowing the grass will be carried out.
Carefully monitor the strength of the fastening, during the process of welding the legs, since the connections must be as reliable as possible.
A disc taken from a peeling device is suitable as a lower support; its diameter should not exceed forty-five centimeters. An old metal pipe with a cross section of no more than three centimeters is suitable as an axial shaft. To manufacture the structure, the presence of bearings 80 106 is also required. A hole should be provided in the pipe section for the installation of the lower bearing, a second bearing is installed on the surface of the pulleys. This requires a welded pulley.
On the previously prepared shaft, put on the disc, which already has knives. Then, using a welder, weld the pulley to the pipe. The structure will be rotated by two bearings.
This model of a rotary mower is characterized by the presence of a grip of 1.10-1.15 cm, while the number of shaft revolutions reaches 1500 pieces. The mower should be installed and then welded onto a welded frame made of metal corners. To ensure safe operation, care must be taken to install the cover. It is recommended to install an additional bearing at the junction of the tractor and the mower, directly at the point where the belt is connected to the figure eight, which will make this connection more durable and provide softness in the operation of the mower, in addition, the friction of the belt will be reduced.
To simplify this model of a rotary mower, the lower disc should be welded directly to the metal structure from the corner.
Tip: In the absence of skills in working with a welding machine, it is better to entrust this procedure to an experienced welder to avoid damage to the device and make it more durable in operation.
This model of a rotary mower allows mowing at a speed of 8-12 km per hour. A fast mowing process will crumble the grass, a slower one. holistic. Such a mower is able to cut vegetation by 6-8 cm.It is used for mowing grass or removing weeds from backyards.
- The principle of operation of a rotary mower
- Features of rotary mowers
- Rotary mower do it yourself
- Homemade rotary mower from scrap materials
- The cost of purchased rotary mowers
Features of rotary mowers
In general, there are several types of mowers for mini tractors or tillers that you can build yourself. Since it is in this way that it will be possible to achieve the greatest savings in money, and at the same time get a high-quality tool.
Mowers that are made at home are:
- rotary;
- trailed;
- segmental.
The basis for a rotary mower is a metal welded structure in the form of a frame. For its manufacture, the presence of metal corners with a standard size of 40×40 mm is required. Body sections are installed on the structure to fix the wheels. After that, you should independently choose the type of the working part, which depends on the place of work of this tool.
Rotary mower
- chainsaw gear chains;
- two discs removed from the seed drill.
Use only hardened steel for making knives. Each disc must have four knives.
On each of the discs, holes must be drilled for the knives, their diameter should not exceed six millimeters. The knives are fixed with a shank. In this case, it is necessary to leave a small gap between the knife and the mount, its thickness should be two millimeters greater than the thickness of the blade. In addition, you should take care of installing a protective case.
Homemade rotary mower from scrap materials
Materials for making:
- four wheels of the same size, up to 45 cm in diameter;
- two axles for mounting wheels;
- a metal sheet;
- the bottom of an old metal barrel;
- four knives;
- nuts and screws for fixing knives;
- welding machine;
- chainsaw;
- handle for control or pipe for making it.
Instead of wheels, it is possible to use an old baby carriage with metal wheels. A chainsaw is fixed on it, which will rotate the so-called rotor.
A temporary transfer from the pulleys will help to replace the tire. A metal sheet is installed on the lower part of the stroller, which must be cut out with an angle grinder, in accordance with the dimensions of the stroller. In addition, it is necessary to cut the bottom in the form of a disc from a metal barrel. From another barrel or improvised means, cut out a casing that will have a diameter slightly larger than the disc. It is possible to manufacture an aluminum canopy that will help to lay the cut grass. A handle is used to control the mower, if available from a stroller, use it, otherwise, build a handle yourself. Attach knives to the disk, make sure the connections are tight. Further, all parts are assembled by welding. First, a metal sheet is attached to the stroller, then a casing is fixed on its surface and a disc is inserted into it. During the start of the chainsaw, this mechanic rotates and mows the grass.
The principle of operation of a rotary mower
There are a wide variety of mowers on the market for agricultural tools today. It is the rotary devices that are most popular. Thanks to their design, they have high productivity and are easy to use both on a large tractor and on a trailer.
The principle of operation of a rotary mower is to produce rotary movements in a rotor that has a round shape.
The rotary mower has the form of a rectangular bar, to which rotors with knives are attached. It is they who are responsible for the correct cutting of plants.
Rotary mowers have become very popular due to their economy. The fact is that these devices use direct energy that comes from the tractor. Therefore, they do not need to generate a certain type of energy for their work. At the same time, productivity increases several times. These mowers are used in the process of mowing grass, weeds, lodged plants, they are called not only rotary, but also rotary.
If we compare a rotary mower with alternative options, then the first one. Efficiency is more than 70%, while others have up to 40%.
The rotary mower is attached to a transport device, which is a tractor, mini tractor or tiller.
There are three types of such mowers, these are devices:
- trailed type;
- semi-mounted type;
- mounted type.
Rotary mowers of the first type are attached to the transport using a three-point scheme, so there is a possibility of adjusting the angle of inclination of the device.
Mounted mowers are ideal for working on small plots of land. The use of semi-mounted devices is recommended on huge areas, and trailed rotary mowers are used to work on uneven ground.
The rotary mower has a fairly wide range of applications. She perfectly mows the grass for its further laying in the rollers. In addition, rotary mowers are distinguished, which not only mow the grass, but also chop and collect it. The principle of operation of such a device consists in cutting plants, feeding them to special knives, which carry out grinding, transportation in a container.
The cost of a rotary mower primarily depends on its working width. In addition, the price is influenced by:
- number of rotors;
- the quality of the material used in the manufacturing process;
- manufacturing firm;
- appointment;
- availability of additional functions;
- mower type;
- rotational speed;
- the height of the grass she mows;
- weight, etc.
The average cost of a rotary mower for a tiller is from 100. At the same time, it is equipped with two rotors, has a capacity of 3500 rpm. The working width of such a mower is 80 cm.
The cost of a rotary mower for a minitractor is from 300 At the same time, it has a slightly large grip and dimensions. Also, such mowers have higher productivity and are suitable for processing medium-sized areas.
A rotary mower for a tractor is much more expensive, its average price is 1,500. At the same time, the working width is doubled or even tripled. This equipment is designed to work on large areas of land.
Characteristic
If we take into account a mower with 3 knives, then its operation comes exclusively from the BOT (power take-off shaft) of the vehicle / tractor.
Often, the operation of this type of mower is widely applicable in works with large areas in order to minimize the time for mowing.
It is worth considering the main characteristics and parameters of the rotary mower, among which the main ones are:
- the ability of the equipment to vary the cutting height of greenery and vegetation depending on the model of the mower;
- maximum mower speed setting and standard mower operating speed;
- maximum productivity achieved by the mower. The indicator is cumulative and is determined as the calculation of the area processed by the mower to the indicator spent on the time spent on processing this area.
Not the least indicator is the rotational speed of the cutting element. This will also affect the performance of the mower, and therefore the time required for processing. However, here it is worth emphasizing that there may be differences in speed depending on the configuration of the equipment.
Perhaps, for one reason or another, you are not satisfied with the rotary unit, but this is not a reason to give up a well-groomed area, this is an occasion to get acquainted with manual mechanical lawn mowers, which are also quite easy to use.
Creature
If there is no possibility of buying a factory-type rotary mower, or if you want to create it on your own, you need to focus on the basic points, without which your efforts to create a mower from the rear axle with your own hands will be zero.
A homemade rotary mower, as already described above, is used for mowing grass, while a lower fit of the blades will allow you to mow the lawn. It should be borne in mind that a mower of this type will mow tall vegetation and literally chop up small-type grass.
As a prototype, we will consider the model required for the tiller. As the main parts, it is worth using 2 discs from a grain seeder, as well as a chain and a gearbox from a chainsaw. The best material for knives would be 65g hardened steel.
The video shows one of the options for creating a rotary mower with your own hands.
A total of 4 knives must be placed on each disc. This is due to the holes previously drilled on the disc with a 6mm diameter solid drill. The fastening of knives to discs is carried out using a tire.
Leave the space between the blade and the knife a millimeter or two more than the width of the knife. The axle is fully tightened with the disc. Do not forget to install a protective housing on the drive.
The above actions will allow centrifugal force, when rotating, to straighten the circular knives, which will cope with their main task. mowing. In addition, it remains possible to rotate the knives for a full revolution (360 degrees), which will make it possible to secure the knives in a situation where they collide with hard earth layers.
In order to make an axle for attaching knives, they resort to strong carbon steel. The axle diameter must be at least 8mm. To preserve the free space in which the knives will move, use the method of tightening the axis until it stops with a disk.
The disks are attached to a welded frame with the subsequent establishment of communication with the drive from the PTO (power take-off shaft). Disc rotation should occur towards each other, which will group the cut grass in rows. But, if you intend to build a rotary mower with your own hands for a mini tractor, then first read this article.
Rotary Mower Specifications
Experts classify the units under consideration into the following types:
- devices that mow and lay grass in swaths;
- devices that mow and lay grass in windrows;
- rotary mowers for tiller, which mow and chop the grass.
Some models submerge, flatten the grass while mowing and laying in the swath. Taking into account the installation method, experts distinguish such devices as trailed, semi-mounted and rotary mounted mower.
The device in question consists of a rear, front and side cutting system. Apparatus with 1, 2, 3 or 5 bars are installed on the tractor. The rotor scythe is launched by the action of the shaft or the wheels of the tractor.
In the photo Rotary mower for a mini tractor
The considered units are installed on the tractor and the trailer in a horizontal position. The knife and connecting rod must move in the same plane. For work on a small plot of land, a Polish tractor mower is used. Front mounted model divides the land into corrals.
Before buying a rotary mower for a tiller, the principle of its operation is studied. If it is necessary to mow sown high-yielding and lodged grasses, weeds, then a rotary apparatus is used. Such a mower fixes itself to the tiller or tractor. The equipment consists of a bar to which the knives are attached.
The device with a grinder consists of a rotor, frame, drive mechanism, pipeline. The principle of operation of a rotary mower on a tiller: when the machinery moves, the vegetation is tilted with a shield, then mowed with a knife. The grass rises, is crushed, falling into the container.
If it is necessary to quickly cultivate the land, then a Polish mower for a tractor or tiller with several cutting elements is used. Experts recommend buying such devices taking into account the following criteria:
- cutting height of the grass;
- performance;
- knife speed.
The plus of a rotary mower for a mini tractor is the presence of a damping device that protects the knife from various obstacles. Experts refer to the additional advantages of the device:
- easy to operate;
- high security;
- saving time.
Training
A self-made mower from the rear axle with your own hands is useless without mowing knives, which are fixed on a disk-type device. The movement is carried out by the power shaft. Bottom discs allow the device to glide on grass.
According to the technical characteristics of Kamaz 4310, it is able to overcome even uneven areas that are beyond the power of some all-terrain vehicles.
The machine for sharpening chainsaw chains is a necessary thing that will come in handy on the farm and therefore it is worth approaching the choice of this unit with all responsibility. This article will help you in this difficult matter.
Few know that you can assemble chainsaw attachments with your own hands, are you interested? Follow the link //machinspec.com/lesozagotovitelnaya/benzopila/nasadki.html and find out more.
Frame production can be carried out with corners from old scrap. It is better to make knives from an old rotary machine from a tractor, which will significantly save money. However, to improve traction and performance, it is worth shortening the rotor by two to four centimeters, based on the power of the vehicle.
Self-creation of the rotor will require a sheet of metal and two disc-shaped circles cut from it, with a diameter of 390 mm. In the middle of the discs, it is worth weld the legs to allow them to rotate. In turn, the centrifugal force to cope with the mowing.
For the lower support. a disc from a peeling device 45 cm in diameter. The axial shaft will be an old pipe up to 3mm in diameter. The design requires bearing 80 106. The tube must be pre-drilled to accommodate the bearing mechanism. You will also need a welded pulley.
A disc with knives should be put on the previously prepared shaft. Next, the pulley is welded to the tube with a welding machine. 2 typical bearings will be responsible for the rotation of this design.
The current model of this mower will grip 1.1-1.15 cm, and the number of revolutions will be 1500 pcs. If weeds prevail on your site, then we advise you not to save money and purchase a special lawn mower for tall grass.
First, the mower is installed and welded onto the welded frame. Work can be secured by installing a casing.
The model can also be simplified by welding the lower disc to the metal structure from the corner.
Materials (edit)
- 4 wheels, up to 45cm in diameter;
- 2 mounting axles;
- Metal sheet;
- 4 knives;
- screws with nuts for fixing;
- metal barrel with a bottom;
- welding machine;
- handle or control tube.
Wheels can always be replaced with elements of an old stroller if it has metal wheels. The chainsaw will be fixed there, performing the rotation of the rotor.
The transfer from the pulleys (temporary) cope with the replacement of the tire. At the bottom of the stroller, we install a sheet of metal, a pre-cut angle grinder, according to the appropriate dimensions. In addition, it is worth taking care of the bottom, which is cut in the shape of a circle from a metal barrel. Another barrel will become or improvised means will become the basis for the casing, with a diameter slightly larger than the disc.
It will not be superfluous to make a visor from aluminum sheets. It will allow you to stack the cut grass. The mower is controlled on the basis of the handle, if it is on the wheelchair, you can use it, if not, build it by your own efforts.
Next is the attachment of knives to the disk, here it is worth monitoring the reliability of all connections. I would like to note that assembling a lawn mower knife with your own hands is as easy as shelling pears and will not require any additional financial costs from you. The next step is to assemble all the parts. In this case, welding is the best solution. First, a sheet of metal is fixed and the casing is fixed to the surface, and a disc is inserted inside. When you start the chainsaw, it rotates and, accordingly, the grass is mowed.
How to assemble a rotary mower
The rotary mower is selected taking into account the characteristics of the cultivated land. Models for tiller and mini-tractor differ in transportation methods, dimensions, functionality. Any rotary lawn mower is designed for mowing grass.
Features of operation of rotary Polish mowers
Polish rotary mowers, as mentioned earlier, do an excellent job with their main job. mowing the grass surface over large areas of the area. But in order for this to last as long as possible and the operation of the mower was stable, it is necessary to follow some rules that can significantly increase the service life of a single unit.
Initially, after the very purchase of the unit, the mower is disassembled. The package includes detailed instructions with drawings that allow you to clearly see the entire assembly process. It is extremely important, at this stage, to carefully study the entire instructions, paying attention to all the assembly points, and only after that proceed to collecting the finished unit.
It is clear that the Russian person is not used to relying on pieces of paper, and he himself knows everything and knows how, but this is still not the case where one can treat the matter so naively. After all, not only the quality of the work performed, but also the safety of you and the people around you will depend on whether you assemble the Polish rotary mower correctly.
CHANTERELLE MUSHROOM HUNTING IDENTIFICATION HOW TO FIND LOCATE HARVEST COOK
After the product is assembled and ready for use, you need to study all safety precautions from start to finish. This is no less important stage than the assembly of the unit, because the design of the Polish rotary mower contains cutting elements, from which almost anyone who is in close proximity to the operating unit can suffer.
Next, you need to install the assembled unit in the correct position, i.e. so that the discs with cutting elements are parallel to the ground. Then, the main frame of the device is installed strictly perpendicular to the axis of the tractor.
We put on the end of the propeller shaft on the PTO of the tractor, i.e. to a unit that transfers rotation from the engine to various attachments and trailers. The unit brought in this way into the working position will perform its main work on mowing the grass with high quality.
In operation, the Polish rotary mower, the device of which we described earlier, does not present any special difficulties. You just need to follow certain measures and manipulations, including:
Regularly check the cutting system consisting of knives for wear and tear. If necessary, they can either be sharpened on the machine, or replaced with new ones.
It is important to monitor the condition of the belts for punctures or cuts, and whether they are properly tensioned. If you are still not familiar with lawn mower belts, please click here.
Periodically, you need to check the level of the transmission oil, which is located in the gearbox on the unit frame. To do this, you just need to unscrew the cap and check the condition, as well as the presence of oil.
By observing these simple steps, you can significantly extend the service life of Polish rotary mowers, and also avoid possible breakdowns, which may be completely inappropriate, especially in the midst of the summer season.
Specifications
If you nevertheless decided to give preference to rotary mowers of Polish production, then you need to know the basic models and the approximate for them. If you decide to give your preference to cheaper models, then you should familiarize yourself with a homemade rotary mower for a mini tractor.
Among the most popular models there are two: “Wirax”. 1.65m and “Wirax”. 1.85m. Let’s dwell on the characteristics of each model.
Wirax. 1.65m
“Wirax”. 1.65m is an excellent option for farms and individual farmers who value reliability and efficiency in the unit above all. Thanks to high-quality parts and a durable body, the mounted rotary mower Polish 1.65, will serve its owner for more than one year, regularly performing its main tasks.
Characteristics of “Wirax”. 1.65m:
- weight. 300 kg;
- width of the mowed surface. 1.65 m;
- height of the mowed grass (min). 3.2 cm;
- height of the mowed grass (max). 4 cm;
- rotation speed. 540 rpm;
- number of disks. 2;
- the total number of knives. 6;
- drive type. BOM.
Mower Wirax and Lisicki, Polish mounted. how to put the cylinder for lifting yourself
Agricultural machinery has long and firmly entered the usual life of a villager. over, it does not matter at all whether he is engaged in agriculture at a professional level or not. One way or another, everyone is faced with the need to acquire such equipment, because the work of a farmer in itself is very difficult, and it is not always possible to cope with it with his own hand.
And if we take into account the large agricultural holdings and farms, then there simply cannot be done without such equipment. Therefore, in recent decades, there has been an extraordinary demand for various sowing, tractor, tillage and other types of equipment.
Various tractor-mounted mowers have gained considerable popularity, allowing you to process large areas, mowing grass and various crops. Large agricultural companies promptly reacted to this trend, deploying the vector of their development to the production of similar units and devices.
At the moment, there are three categories of the main manufacturers of rotary mowers for tractors: European companies, domestic manufacturers and Chinese equipment. Each category has its pros and cons, for example, Chinese manufacturers provide their equipment at very competitive prices, significantly different from European ones.
Modern production technologies and advanced technological enterprises located in Europe allow this quality to be fully demonstrated. One of the most famous manufacturers, popular among farmers, is the Polish company Wirax, which produces various agricultural machinery, including rotary mowers for tractors. You can find out about the segment tractor mower, which is an excellent alternative to Wirax mowers, in this article.
Wirax device. 1.85m
Wirax. 1.85m is designed for mowing various crops, grass and much more. In addition, the Polish rotary mower 1.85 is an effective method of controlling weeds and weeds that sprout abundantly in the fields.
Due to its design, the mower can handle large areas, which is very beneficial for large agricultural enterprises. Rotary mower Polish, will become an indispensable assistant in rural life.
Characteristics of “Wirax”. 1.85m:
- weight. 380 kg;
- dimensions (l / w / h). 320cm / 105cm / 100cm;
- width of the treated surface. 1.85 m;
- speed. 10 km / h;
- the total number of knives. 6;
- tractor requirements. at least 40 hp;
- number of disks. 2.
Features of the mower in the photo.
So, we examined the technical characteristics of the main models of Polish rotary mowers. The indicators are largely identical, but there are still a couple of differences that affect the total difference in price. Which one to purchase is up to you, it all depends on what area you have at your disposal and what specific requirements for the unit are important for you.
Principle of operation
Rotary mowers are based on the principle of mowing grass, by starting the machine on which the mower is installed. The description is very schematic, but the principle of operation of a rotary mower is not very complicated. But this simplicity is false, because the results it shows are truly amazing in the quality and scale of execution.
This type of technique is very popular with farmers, because it allows you to process many hectares of the area, mowing various grass surfaces. Here I would like to mention a mower for tall grass and uneven areas, which will delight you with a quality lawn mow.
Depending on the configuration, the rotary mower can be mounted, semi-mounted or trailed. Each design option has its own advantages and disadvantages, depending on the purpose for which you are going to use it and what area to process.
The complete set of a rotary mower includes:
- cardan shaft;
- cutting knives;
- multiple disks;
- a frame consisting of metal bars;
- wheel system;
- key for changing knives.
The correct proportion of gasoline and chainsaw oil is the determining factor in the life of the tool.
For those who are confident in their abilities, we suggest following the link //machinspec.com/lesozagotovitelnaya/benzopila/kak-natochit-cep.html and learn how to sharpen a chainsaw chain with your own hands.
The KamAZ 4308 operating manual, which you can find here, can significantly reduce the risk of unit breakdown.
The Polish rotary mower, like similar models from other manufacturers, is designed for a wide range of agricultural activities. Mowing grass for livestock feed, harvesting various crops. all this is part of the scope of rotary mowers. However, as in any other technique, there are also several nuances that you need to pay attention to first of all when purchasing such a mower.
Among the main points and characteristics to which attention should be paid are the following:
- minimum and maximum cutting height of the cut grass;
- the area that the unit processes;
- rotation frequency of knives;
- the width of the strip of the processed surface, produced by the mower in one pass.
Paying attention to these points, you can buy yourself a reliable unit that will last for many years. However, there are already quite popular models in which all these characteristics are combined in optimal proportions.
For a general view of the mower, see the video.
Brand history
The company began its formation in 1994, when the first serial models of various agricultural equipment began to be produced. It was precisely this vector of development aimed at farms and their provision that was approved, which was the right decision at that time.
With the passage of time and the growth of production rates, the company began to open its factories in other locations in Europe. This decision allowed not only to increase the production of equipment, but also gave a considerable number of jobs where these factories were located.
Thus, the company, in addition to its main activity, also performs a certain social function, which is extremely important in these difficult times.
In 2012, Wirax merged its two branches, located in Turkey and Romania, into one large corporation. The company cooperates with many Turkish manufacturers of machinery and related components to them, which allows it to respond in a timely manner to constant changes and new trends in this market segment.
Segment mower for tiller Zarya or rotary Neva. which is the best mower and lawn mower
lawnmower how to assemble 1600W Spear & Jackson, Assembly instructions are not very clear
Makita Electric Lawn Mower, Makita Electric Lawn Mower. Lawn Mower
Do-it-yourself mower: chain and disc for MTZ. do-it-yourself rotary home-made mowing machine
What is mulching in a lawn mower. gasoline and self-propelled on wheels with a function