How to attach PVC panels to drywall

How to attach PVC panels to drywall

Plastic panels are increasingly used for finishing rooms. In particular, they are ideal for rooms where humidity is high. on the loggia, on balconies, in the bathroom. It is also important that these designs can be used to decorate both walls and ceilings. The surface to which you will attach them must be prepared in advance.

Facing the premises with plastic panels is a very variant of finishing the house, the least labor-intensive. Mounting the boards on gypsum board is a high-tech process, which is the main advantage of the material for finishing.

  • Fastening plastic panels to the plasterboard
  • Fastening boards to plasterboard
  • General rules of fixing plastic constructions
  • Basic rules for fixing the panels Wood-fiber board on gypsum board
  • The advantageous features of the GKL panels
  • Decorative wall panels
  • Performing assembling of PVC panels on plasterboard
  • The first method. metal purlins
  • The second method. wooden lath
  • Fixing the battens to the battens
  • Method three. adhesive fastening
  • Metal crate
  • Wooden batten
  • Fastening of the battens to the purlins
  • Glue compound
  • A little bit about the panels Wood-fiber board
  • Materials required for installation
  • General instructions for fixing the frame profiles made of metal
  • General fastening rules
  • How to fix the PVC panel to the wall without purlins
  • When it is possible to install with your own hands without purlins
  • When fixing without a framework is not possible
  • How to fix plastic wall panels simply to the wall without a framework: options
  • Is it possible to install PVC panels without a crate on the ceiling

Assembly of the wall is carried out on the principle of a child’s constructor, it is clear that such work is easy to perform even a non-professional. During installation work, you will not have to deal with dirt, dust, any other waste. This, of course, is another argument in favor of plastic panels.

You decide how you want to cut the panel. lengthwise or crosswise. During the installation of structures you should not have any problems with the fitting of dimensions.

Mounting the boards on plasterboard

First, using self-tapping screws. Using this tool, the plastic panels are attached to the frame.

To effectively implement this method, you need to calculate how to position the metal frame and plasterboard sheet.

Fix structures on the surface of drywall should be in a direction that is perpendicular to the way the profiles are located.

Accordingly, if the bearing profiles are arranged vertically, the plastic panels themselves must be placed horizontally.

Also, you need to take into account where the starter rails will be fixed, with which the edges of the panels can be hidden.

Fastening the plastic on the wall or ceiling is carried out through in those places where the supporting profile is located.

Secondly, attach the construction to drywall with glue.

The method is convenient in that the number of options for mounting plastic panels is not limited. To work the experts use liquid nails.

Cover the surface of the back of the panel with a strip of adhesive in the center of the design and around the perimeter, then press it firmly to the drywall. Each new board is inserted into the previous one.

General rules for fixing plastic structures

If the preparations have been made correctly, you can move on to the stage of mounting the panels on the wall or ceiling, using glue or liquid nails. To do the job properly, use a self-tapping screw, which is used to place the bars of purlins on the surface.

In the case when the panels are fixed horizontally, the skirting boards must be placed vertically. For the boards to be precisely connected to each other, mount the joists with the help of a level.

The installation should be performed from the corner, where the finish strip is fastened in advance. You will need a skirting board if the panels will cover the wall up to the ceiling.

All the work that follows requires maximum precision, accuracy and great attention from you. Mount the construction to the plasterboard so that its small shelf can exactly enter the corner.

Then you will need to mount the plastic board to the purlin side of the mounting shelf. The following structure is attached in the same way. Installation should continue until you reach a corner or doorway. These places should be pre-marked with finishing elements.

Insert the last board into the finishing element, applying certain conditions for this.

How to use wall panels of plasterboard

The new generation of finishing material is gaining popularity and demand. Today wall panels are used with great success for cladding various surfaces. The material is environmentally safe for humans, and has high technical characteristics. This and fire resistance, moisture resistance, as well as sound and heat insulation, high quality plastic with a wine coating and other source material. The main purpose of gypsum board panels is to create partitions in the living room or office. And also, the lining of walls, supporting structure or other interior elements.

Basic rules of fixing the panels Wood-fiber board on gypsum board

Experts know that there are two main methods of fixing the panels. But each of them, despite the differences, provides general requirements that should be observed in the finishing process. As a rule, fasten the Fiberboard panel to the gypsum board can be by frame method or with the help of special glue.

  • First, you can not bend the fiberboard panels, they can only be trimmed. This applies to installing the product in a corner. A special tool is used. After trimming, a special corner is installed on the edge. This method of installing the panels can be used inside or outside the room.
  • Secondly, in the case of frame fastening of the panels, the lowest slat must lie on the floor. This will allow you to securely fasten the skirting boards.
  • Third, to prevent the first pane from twisting, use a spirit level to secure it. After all measurements, it is good to fix it with self-tapping screws. They will be closed at the bottom with skirting boards, at the top with the ceiling, and in the corner with a decorative overlay.

Install the structures in offices, sports and health facilities. Also, in cultural and leisure facilities, medical and therapeutic organizations, administrative and industrial premises. In educational institutions, residential apartments and houses, stores and shopping centers.

To control all work with a construction level is not necessary, but every fifth slat is recommended.

For the production of shockproof and environmentally safe material is used. Therefore, the panels are resistant to light, do not require careful maintenance, can withstand all kinds of impacts.

Advantageous features of GKL panels

The demand for the products is constantly growing. And this is not surprising, because the products are of high quality and durability, helps in the repair process to finish any surface. The most stylish and practical solution for room decoration. That is why it is worth noting their advantages and positive qualities.

The advantages of GKL panels:

  • Before installing them does not require prior preparation of the surface,
  • The room can be used immediately after finishing,
  • The panels allow you to save access to communication systems, without damaging the decorative coating,
  • Panels optimise interior construction costs,

Plasterboard panels are not only used as cladding material. They are also used for structural purposes. Or as a lightweight room divider. They are easy to install and do not require too much space.

The basis is plasterboard, and from above the panels are covered with a strong film, it protects the products from mechanical impact.

Panels can be used to imitate natural materials. For example, wood or stone, or decorate the interior of the room with original ideas in the classic style. Modern monochrome wall panels allow you to decorate any interior in the room.

Decorative wall panels

Products based on plasterboard sheets are used as a budget option to level or decorate walls. Also, to install soundproof partitions in the room. They are made with a hot press of plaster and construction paper, so they are used mainly for interior decoration rooms.

Due to their positive qualities and features of the production of GPB panels facilitate the finishing of the room. Now there’s no need to level, plaster or paint the walls to decorate your home.

Thanks to a special coating the panels retain their appearance for a long time. They simplify maintenance. To install them does not require special knowledge or skills. It’s easy and simple. Not only that, due to the environmentally friendly material used for the production, GKL panels are used in kindergartens and schools.

To create an interior will not have to paint the walls or glue wallpaper. It will be enough to install gypsum plasterboard decorative panels. They are very popular in construction as cladding material. The installation of cladding decorative panels is fast, thanks to the automation of the process.

Performing the installation of PVC panels on plasterboard

When the choice falls on plastic drywall panels, not many people know how to properly perform the installation. If you follow the recommendations of qualified professionals, the work can be done independently. As a rule, for the installation of PVC panels on drywall using two main methods, which should be considered in more detail.

  • Self-tapping to a special wooden frame. In this case it is necessary to take into account how the supporting profiles are fixed. If they are positioned horizontally, it means the panel is mounted vertically. And vice versa. Fix the panel on the support profile. If the products are laid horizontally, then they are fixed, starting from the floor in the upward direction. In the case of vertical mounting work is carried out towards the door or window.
  • Special adhesive composition. This method of fixing the panels can be in any direction, it is not so important. Not only that, and level such a surface is not required, as it itself is even. Experts recommend using liquid nails. Apply the product on the back side all around the perimeter. Wait a certain amount of time for the glue to absorb, then put the panel and press it down.

If you use both methods of fixing the panels, they will hold even stronger. First attach the panel to the adhesive and then screw it on with self-tapping screws. But in this case you must remember the rules of installation for each method separately.

Cladding technology

Every kitchen contains more than one decorative element. Finishing with plastic, for example, can be done only over the stove and over the sink. Or the plastic layer will be completely over the countertop. In any case, in addition to plastic, wallpaper, tile, decorative stone, etc.д. You can make it so that one wall is wallpapered, the other is tiled, the third is made of stone, and the fourth will be shelves with dishes. Either way will work. But from what is already planned for the kitchen will vary the ways of mounting plastic strips.

Installation of plastic windows: rules, sequence

  • The first method is a horizontal stripe finish. This method can only be used if the entire kitchen will not be finished with plastic. For example, the PVC will be laid only above the countertop and up to the hanging shelves. In this case, 2 to 5 strips of plastic will be laid and they can be installed horizontally.
  • The second way is a vertical finish. This method can be used to decorate any room. A full wall can be vertically sheathed with PVC and the result will be just fine. The kitchen is no exception, it can also use this method.

Mounting laminate should be on the existing framework. As in other cases with a frame, you must prepare the wall to make a wooden frame (first we beat the top and bottom strips, and then adjust the vertical strips around the perimeter and horizontal strips inside the frame). When the frame is ready you can put some thermal insulation to insulate the room. Finishing laminate is made with minimal effort and loss from the corner of the room. If you start in the center of the wall. then you will have to cut twice a strip of plastic.

The wall version of PVC is laid with the help of rails. There are types of them: F (for the beginning of laying, ending or corners), L (only for the beginning and ending walls), H (universal for joints, joints). There are also exterior profiles, corners and skirting boards. Depending on the plane to be processed, the guides are also chosen.

To install the plastic do not need screws or nails. Each subsequent strip of plastic goes into the grooves of the previous one. For a tight joint, some parts can be docked with liquid nails, but this option is resorted to in extreme cases. The wall type of processing is very simple, much more difficult processing plastic ceiling. But this is only because the installation of the panels on the ceiling requires the involvement of several people.

I would also like to give a few tips for those who still decided to make a room in plastic on their own:

  • When choosing trim in the store, pay close attention to the quality of the strips themselves and their integrity;
  • if faced with the issue of plastic for the first time, it is recommended to buy liquid nails at once, which will help to improve the docking in difficult places a little;

As a result of the article, I would like to wish each master great patience in working with such material. Make a detailed schedule and plan of what you will do and only then proceed to work. For a perfect look, the walls should be as even as possible. If the room has beveled corners, it is better to choose another option for finishing, or initially level all the walls. Good luck in your endeavors!

Glue for PVC panels: what is the best

Household stores offer a wide range of adhesives. Some of them can not be used for fixing the panels, as they can cause deformation and have a bad impact on their appearance.

But there are a number of compositions that are well suited for fixing plastic panels:

How to fix PVC panels to the wall 75 photo How to fix PVC panels to the wall 75 photo How to fix PVC panels to the wall 75 photo How to fix PVC panels to the wall 75 photo.

  • Kleiberit 636. It is not afraid of water, when applied, you need to treat only one side. Made from synthetic resins. A big advantage is its safety for health.
  • Emfikol 34012A. This glue with a viscous consistency is designed specifically for attaching PVC panels. It has a good adhesion to this material. It is very strong, but colorless.
  • Moment Crystal. This is a fairly expensive compound, but it will glue the boards to any surface very well. At the same time it is colorless, so this adhesive can safely be used to attach PVC finishing materials.
  • Liquid nails. About this adhesive will be described below.

There are other types of adhesives on the market. Some praise Moment Montazh and Titan. When buying, it is important to understand that the high price of the composition will not yet be a guarantee that it is suitable for finishing PVC paneling walls. You should carefully read the marking and instructions of the adhesive, consult with the seller. If even after the purchase there are any doubts, or means were bought earlier, given as a gift, left over from the last repair. it is better not to risk. How does the adhesive affects the polyvinyl chloride, you can learn from experience. It is enough to apply the compound to a small surface of the board and see how the plastic reacts to the glue.

Mounting the panels on drywall

Plasterboard finishing walls and ceiling is done for their quick and easy leveling for painting or wallpaper. But this option of cladding does not suit everyone, and this is quite normal. it is possible to decorate flat surfaces with panels and for this there are at least three ways.

Method one. metal battens

As a rule, fiberboard and PVC is mounted on the grid and the same method can be applied in this case. Gypsum plasterboard is attached to a galvanized metal frame, where the profiles are arranged vertically, with a spacing of 30 cm or 4 pieces per panel. It can be either CD (for wall cladding) or CW (for a partition), but both in one and the other case there is a base for fixing the brackets.

As the brackets is very convenient to use peorized galvanized profiles in the form of tape. in working condition they bend and resemble the letter “U”. The width of the metal profile, which fastens the drywall sheet is 60 mm, that is, just the length of the rung of the letter “U”, but the mounting holes are offset to the center there. It turns out that for the installation of the console, it is an ideal base, in addition, it is not installed transversely, and along.

For purlins under the panels need a step not more than 40-50 cm, therefore, for the room height of 250 cm will need 6 rows of horizontal profiles. Exactly 6, not 5. at the bottom of the floor and at the top of the ceiling there must be a base for attaching the battens. For each profile of the lower frame you will need one hanger, therefore, you can easily calculate the amount of material for purlins.

If the length of the rad is greater than the length of the CD, they will have to join and use connectors for this, although this is not necessary. Instead of connectors, the profile is simply trimmed and docked, secured with small self-tapping screws. But here it is very important that the junction was just on the bracket, therefore, the profile may have to be cut to correctly calculate the attachment of the two parts.

The distance of CD rows from the wall depends on whether you are going to mount insulation, which also serves as soundproofing. U-type hangers allow for the adjustment of such a gap. Cantilever to the base are fixed with screws 35-50 mm long, and the CD is fixed to them with small screws 9-11 mm long.

Method two. wooden battens

It is much easier to install wooden battens, but here you should take care that all the laths have the same thickness. The number of rows here is calculated on the same principle as for metal, based on a pitch of no more than 40-50 cm. But the cross-section of the bars can be chosen arbitrarily. depending on whether you need to mount the bottom of the insulation, and how thick it will be.

Fastening the wooden battens is also done with screws, the length of which depends directly on the thickness of the bar. Here it is important that the screw reaches the metal under the drywall and is held in it by the threaded part. For example, for a bar with a cross section of 50 mm is enough screws 75 mm. 15 mm screws will remain for screwing.

The joints of the laths must necessarily converge on the profiles of the main frame and each side must be screwed to the base. Keep in mind that the edge of the laths will split when a screw is screwed into it, that’s why you should drill a hole there before fastening. If you cannot make the connection above the profile of the main frame, then the laths are joined by overlapping the rail from below and/or above (scrap of the same lath).

Please note! In bathrooms and other rooms with high humidity mounting panels on a wooden frame on the staples is highly undesirable. The wood will let go of the brackets when swelling, and they will simply come out of the laths.

Attaching the battens to the battens

For installation Fibreboard panel on a metal or wooden crate used klyaymerov. special devices that are put on the bottom chamfer of the tongue and screwed (nailed) to the crate. It should be noted that fixing screws to klyaymerov to implement a much easier, and it will hold better. You need either one screw or two nails per claymer.

The first batten is installed with an emphasis on the adjacent wall, but if the tongue side it is held in place by claymores, then the bevel side it can only be secured through the panel. To do this, as close as possible to the edge, it is screwed with self-tapping screws, which at the end of the cladding is closed with a decorative bar.

PVC boards do without claymores. at the bottom of the tongue there is an apron, which is either nailed to the base with a stapler, or screwed with a self-tapping screw. But while both options (staples or screws) are possible for wooden purlins, only self-tapping screws should be used for CDs.

In addition, for plastic veneer there is no need to screw through the panel on the chamfer side when installing the first board, but there are two options here. The first method is when the herringbone-type guide (external or internal) is installed in the corner, where the edge of the board is inserted. The second method involves overlapping the last panel on an already tiled wall with an L-shaped profile. the guide simply presses it to the base.

If it is an outside corner, then instead of “herringbone” use F-shaped guide, only the outermost batten on the adjacent wall is screwed through the body. Then the edge of the “herringbone” overlaps the heads of the screws, and by turning the panel is inserted into the tongue. By the way, if desired, the same method with the guides can be used for MDF.

The third method is adhesive fastening

In some cases there is a need to save space, that is, the batten in any case will take a few centimeters of the room, but if it is not fixed, it can be a deciding factor in the placement of furniture or bathrooms. If there is a need to save space, you do not need insulation, and you want to get rid of the additional frame, then use the adhesive method of attachment.

On the construction market there are so many varieties of polymer adhesive, and each of them is good, although made by a different manufacturer. But most finishers prefer two options, these are “liquid nails” or PVA. it is not only cheaper, but also more convenient. And it’s the same for MDF and vinyl.

But if a rigid fixation (claymores, staples, nails, screws) immediately you can start installing the next panel, the fixation on the glue requires a certain ageing, so that the battens do not “float”. Nevertheless, the method itself is quite practical and reliable.

How to use gypsum board wall panels

A new generation of finishing material is gaining popularity and demand. Today wall panels are used with great success for cladding various surfaces. Material is environmentally safe for humans, and has high technical characteristics. This and fire resistance, moisture resistance, as well as sound and heat insulation, high quality plastic with a wine coating and other source material. The main purpose of gypsum board panels is to create partitions in the living room or office. As well as, cladding of walls, supporting structures or other interior elements.

Basic rules for fixing wood-fiber board on gypsum board

Experts know that there are two main methods of fixing panels. But each of these, while different, provides general requirements that must be followed in the finishing process. As a rule, fasten the Fiberboard panel to the plasterboard can be frame method or by using a special glue.

  • First, bend the fiberboard panels can not, they can only be trimmed. This applies to installing the product in a corner. A special tool is used. After trimming, a special corner is installed on the edge. This method of installing the panels can be used inside or outside the room.
  • Secondly, in the case of frame fastening of the panels, the lowest slat must lie on the floor. This will allow the skirting boards to be securely fastened.
  • Thirdly, to prevent the warping of the structure, the first panel should be fixed using a construction level. After all the measurements, it is good to fix it with self-tapping screws. They will be closed at the bottom with skirting boards, at the top with the ceiling, and in the corner with a decorative overlay.

The constructions are installed in office premises, sports and health-improving establishments. Also, in cultural and entertainment venues, medical and health care organizations, in administrative and industrial premises. In schools, apartments and houses, stores and shopping malls.

It is not necessary to control all work with a construction level, but it is recommended to control every fifth slat.

Shockproof and environmentally safe material is used for production. Therefore, the panels are resistant to light, do not require careful maintenance, can withstand all kinds of impacts.

The advantageous features of GKL panels

The demand for products is constantly growing. And this is not surprising, because the products are of high quality and durable, helps in the process of repair to finish any surface. The most stylish and practical solution for decorating the room. Therefore, it is worth noting their advantages and positive qualities.

Advantages of GKL panels:

  • No surface preparation is required before their installation,
  • The room can be used immediately after finishing,
  • A panelled finish keeps utilities systems accessible without damaging the decorative surface,
  • Panels optimize the cost of finishing work,

Plasterboard panels are used not only as a cladding material. They are also used for the creation of supporting structures. Or in the form of lightweight interior partitions. They are easy to install and do not require too much space.

The panels are based on plasterboard, and are covered with a strong film on top, which protects the product from mechanical stress.

Panels can be used to imitate natural materials. For example, wood or stone, or decorate the interior of the room with original ideas in the classic style. Modern monochrome wall panels allow you to decorate any interior in the room.

Wall decorative gypsum plasterboard

Products based on plasterboard sheets are used as a budget option to level or decorate the walls. And also to install soundproof partitions in the room. They are made with a hot press of gypsum and construction paper, so they are mainly used for interior decoration of the room.

Due to its positive qualities and characteristics of production GPB panels ease the finishing of the room. Now there is no need to level or plaster, paint the walls to finish the house.

Thanks to a special coating panel retain their appearance for a long time. They simplify maintenance. To install them does not require special knowledge or skills. Everything is easy and simple. Not only that, due to the environmentally friendly material used for production, gypsum plasterboard panels are used in kindergartens and schools.

To create an interior do not have to paint the walls or glue wallpaper. It will be enough to install plasterboard decorative panels. They are highly popular in the field of construction as a cladding material. Thanks to the automation of the process, the installation of facing decorative panels is carried out quickly.

Performing assembling of PVC panels on the plasterboard

When the choice falls on plastic drywall panels, not many people know how to perform the installation correctly. If you follow the recommendations of qualified professionals, you can do the work yourself. As a rule, to install PVC panels on drywall using two main methods, which should be considered in detail.

  • Self-tapping to a special wooden frame. In this case, you should consider how the supporting profiles are fixed. If they are laid horizontally, then the panel is installed vertically. And vice versa. Fasten the panels to the supporting profile. If the product is laid horizontally, then they are attached starting from the floor in the upward direction. In the case of vertical installation, the work is carried out towards the door or window.
  • With a special adhesive. This method of fixing the panels can be in any direction, it is not so important. Not only that, and level such a surface is not required, as it itself is even. Specialists recommend using liquid nails. The product should be applied from the back side along the entire perimeter. Wait a certain amount of time for the glue to soak in, put the panel and press it.

If you use both methods of fastening the panels, they will hold even tighter. First plant the product on the glue, and then screw with self-tapping screws. But in this case, it is necessary to remember about the rules of installation for each method separately.

How to attach the fiberboard panels to the plasterboard Tips Builders On DomoStr0y.ru

In this case, the plasterboard is attached to the galvanized metal frame. Profiles here are placed vertically, with a distance of 30 cm or 4 pieces per panel. It is convenient to use galvanized profiles as consoles. They are made by tape and resemble the letter U. The panel is installed along, not across, so it is an ideal base.

If you make a crate for the panels, you need a step not more than 50 cm. Thus, for a room with a height of about 250 cm will require about 6 rows of profiles. But it is not necessary to take less and more, as at the top and bottom it is necessary to have a distance for fastening the cladding boards.

The amount of material for purlins is calculated simply. for the profile of the lower frame one hanger is required.

Decorative wall panels of gypsum plasterboard

Products based on plasterboard sheets are used as a budget option to level or decorate the walls. Also, install soundproofing partitions in the room. They are made with a hot press of plaster and construction paper, so they are used mainly for interior decoration of the room.

Due to its positive qualities and features of the production of gypsum plasterboard makes it easy to finish the room. Now there is no need to level or plaster or paint the walls in order to finish the house.

Thanks to a special coating the panels retain their appearance for a long time. They make maintenance easier. To install them does not require special knowledge or skills. Everything is easy and uncomplicated. over, due to the environmentally friendly material used for production, gypsum plasterboard panels are used in kindergartens and schools.

To create an interior would not have to paint the walls or wallpaper. It will be enough to install plasterboard decorative panels. They are very popular in the construction industry as a cladding material. The installation of cladding decorative panels is quick, thanks to the automation of the process.

Advantageous features of gypsum plasterboard panels

The demand for the product is constantly growing. And it is not surprising, because the products are of high quality and durable, helps in the process of repair to finish any surface. The most stylish and practical solution for decorating the room. Therefore, it is worth noting their advantages and positive qualities.

The advantages of GKL panels:

  • Prior to their installation does not require prior preparation of the surface;
  • The room can be used immediately after finishing;
  • Finishing with panels allows you to maintain access to communication systems, without damaging the decorative coating;
  • The panels optimize the cost of finishing work;

Fixing the battens to the purlins

To plant Fibreboard panel on the crate (wood or metal), you must use claymores. They are put on the bottom chamfer of the tongue and fastened to the batten. Fasten the claymores easier with screws, and the construction will hold much stronger. For each claymer you need to prepare one screw, or take two nails.

Panels are mounted with an emphasis on the adjacent wall. On the chamfered side the panel is fixed through. To do this, closer to the edge, it is screwed with self-tapping screws. In order not to spoil the view, they can be covered with decorative elements after installation.

Plastic ceiling in the bathroom. fixing and installation

Bathroom finishing is subjected to severe tests by high humidity, temperature fluctuations, insufficient air circulation, and therefore deteriorates faster than in other rooms.

In order not to perform repairs every 5-7 years, wear-resistant and water-repellent finishing materials are used in the bathroom, in particular plastic ceiling panels. They allow you to quickly, inexpensively and beautifully cover the ceiling without leveling the surface and dismantling the old coating. In this article we will tell you how to make a plastic ceiling in the bathroom correctly and qualitatively.

Glue compound

Fiberboard and PVC panels can be attached to drywall with adhesive. This method is much easier, because the panels can be attached in any direction. You do not have to level the walls, because the drywall is initially flat. The easiest way to do the gluing is with liquid nails.

Glue is applied to the back of the panels around the perimeter and center. Then you have to wait a little so that the composition was absorbed, and then the product is attached to the drywall and pressed firmly to the surface. Panels are attached in turn, each of them must be inserted into the previous one. Thus finish the entire substrate, until all the elements are fixed.

Liquid nails are not always of good quality, so for extra durability you can also use self-tapping screws.

How to attach plastic panels to plasterboard

Plastic panels are the perfect material, with which you can quickly and easily breathe new life into any surface. They are lightweight and insensitive to moisture. Thanks to these properties, their scope of application is not limited to internal work. The material has been successfully used to decorate summer showers, garages, outbuildings and many other objects. At the same time in the interior decoration of the house it is used quite widely.

Example of finishing the ceiling with plastic panels

Installation of plastic panels on drywall is one of the many options for decorative finishes, which can be done with their own hands in a matter of hours.

Mounting panels on drywall

Plasterboard finishing walls and ceiling is done for their quick and easy leveling for painting or wallpaper. But this option of facing does not suit everyone, and this is quite normal. it is possible to decorate flat surfaces with panels, and for this there are at least three ways.

What to replace drywall. Alternative to gypsum board

Wood chipboard or particle board. this material is ideal for the construction of interior partitions and finishing work, the material is easy to work with and is perfect as an alternative to gypsum board. Its advantage is also that it is fairly inexpensive, easy to install and their strength.

Particleboard can also be replaced by OSB or Fibreboard, which have similar properties, but we must remember that they are very susceptible to moisture (so this material should not be used in bathrooms), and the boards require a well-prepared surface before installation.

Analog to moisture-resistant drywall

LSB or glass magnesite sheets are an excellent analogue of moisture-resistant gypsum plasterboard, as these sheets are good for aligning walls and are suitable for creating partition walls. Excellent for wallpapering, painting, tiling, etc.д.

This material is also quite simple to install, and most importantly, it is not afraid of water, fire and frost, is fairly environmentally friendly and durable. The disadvantages are the possible thermal expansion.

GGP or groove-and-groove boards are very similar in their structure to gypsum board, so they are the most common substitute. They can be solid and hollow. Their positive characteristics are strength and reliability, fast assembly due to the presence of special grooves, the ability to keep heat and not let sound through.

It is because of these qualities, the GPB is recognized as the best material, as an analogue of plasterboard, able to fully replace gypsum board. However, these boards have a small disadvantage. They are too sensitive to high humidity.

However, there are two types of GGP. ordinary and with enhanced resistance to moisture.

Thus, it can be seen that the question of what to replace drywall, is quite realistic in implementation, and for its solution there are many different building materials. There are materials with very similar properties and even better characteristics than GPB.

Features of mounting plastic panels on the walls

If the room is dry and the walls are flat, you can mount the panels directly on the wall without using the crate.

Fixing the panels on the adhesive directly on the wall without using a crate.

In a room with high humidity, as a crate should be used plastic or metal mounting profile. In this case, the panels are attached to the rails with special clips, which greatly facilitates the installation and dismantling of construction.

Fixing the panels using plastic profiles with special clips.

You should take into account the expansion of the material when the temperature changes, so when fitting the height of the panels, leave a small gap. If you use a wide beam for crates, then in the resulting space between the wall and the panels you can put insulation or soundproofing material.

Installing the finishing material

After installing the sheathing, you can begin to mount the cladding. Installation begins with the starter strip profile, it requires 2 types of corners. the starting and finishing.

After fixing the starting corner, the groove of the first panel is inserted into it. After that the installation of the product to the crate.

Installation of panels to the crate is carried out with screws or nails.

After installing the first element, its groove is inserted into the narrow side of the next product, and the wider side in the groove of the corner of the final type. All other elements are installed according to the same principle.

The connection between the elements should be tight, without gaps and gaps, with barely visible joints.

Around the doorway, window and bathroom fixtures installation panels are installed with starter corners.

At the final stage is the installation of ceiling and floor skirting boards, which will hide the joints.

Features of the installation of plastic panels on the walls

If the room is dry and the walls are flat, you can mount the panels directly on the wall without using a crate.

Fixing the panels on the adhesive directly on the wall without using a crate.

In a room with high humidity, as crates should be used plastic or metal mounting profile. In this case, the panel is attached to the rails with special clips, which greatly facilitates the installation and dismantling of construction.

Fixing the panels with plastic profiles using special clips.

Take into account the expansion of the material with temperature changes, so when fitting the panels on the height, leave a small gap. If you use a wide beam for the crate, you can put insulation or soundproofing material in the space between the wall and the panel.

How to fasten the plastic panels to the plasterboard

Plastic wall panels. a low-cost way to decorate and improve residential, office and public buildings.

Maintenance of the coating is not complicated: the coating can be cleaned with water and powders, it is chemically resistant, belongs to the group of materials of average fire hazard, do not create an environment for the development of mold fungi, bedbugs, cockroaches and bark beetles. High moisture resistance allows the use of panels in showers, bathrooms, kitchens and public places.

The main advantage of plastic wall panels is that they are mounted even on curved walls. Covering with this material changes the room, adds aesthetics and meets modern fashion influences.

Fabrication and installation of stiffeners

Additional stiffening ribs, on which wall panels are installed, are cut as the work is done and on the site. Installation begins from the wall. The first vertical strut has a groove, while the second strut does not, due to the orientation of all the struts in one direction. According to the classical technology requires to install two vertical struts so that the cut looked like two connected and turned opposite the letter “U”. Two profile units significantly increase the cost of the crate and have no significant impact on increasing the rigidity of the structure. With one profile a stable and optimally rigid purlin is formed.

As an alternative to the second guide will act corner or section of the profile of 70-100 mm.

  • Screw a corner or a piece to the back side of the vertical strut. The mating part goes under the stiffener.
  • Perform a similar procedure for all elements of the crate.

The method has been tested and proven to be effective in creating low-cost strong purlins.

Horizontal guide segments are installed visually, without a level. The main thing is to set the rails vertically correctly. The position of the stiffeners does not play any particular role.

Installation of wall panels on the profile

Calculate the wall plastic panels. The size of a standard sheet of 122×244 cm. The dimensions of the set panels are more suitable for the described example. Choose a sheet with a width of 300 mm and a length of 3000 mm. Cut the extra length with a fine-toothed hacksaw. Length measurement is performed for each area to correct unevenness and height differences in the room.

  • Install the panel from the wall.
  • The first panel is set with pedantic precision on the level. If the initial plate is mounted carelessly to the end of the wall, a huge gap is formed, forcing to dismantle the entire area and redo.
  • Fix the exposed panel to the stiffener or vertical bar with self-drilling screws.
  • Insert the second panel into the groove of the starting plate. Fix.
  • Further steps are repeated according to the scheme described above.
  • Near the end of the wall is usually formed a narrow gap for a whole sheet. Measure the width of the strip near the ceiling, floor and in the middle of the height. Cut out a template from a thick cardboard. Place the sheet against the gap and check if it is the right size. Cut the panel in half and insert it into the gap.
  • After completing the installation of one wall, make installation of panels on the following surfaces.

Unattractive narrow gaps at the junction of panels with the ceiling, corners and floor are masked by plastic decorative strips, skirting boards and corners. Installation and fastening is performed with special latches. This method allows you to quickly and easily dismantle the elements.

Plastic wall panels, the photo of the premises with an interesting solution of interior decoration, will be a guide when choosing your own project.

Glue for PVC: variety, what is better to choose, the technology of use

PVC panels are a popular material for cosmetic repairs. This fact can be explained by their low cost, ease of installation and a variety of colors. With this material, you can quickly and inexpensively repair a small office, utility room, decorate the walls in the store and the like. However, such panels are very often used for quick and practical repair of the bathroom. This can be done with your own hands, but it is better to gather complete information before the work, than and how to glue plastic to the wall.

PVC stands for “polyvinyl chloride”. In fact, it is an ordinary plastic, which has been given the desired shape during production. PVC panels have been used as a finishing material for many years. This was made possible thanks to the obvious advantages possessed by the panel. Among them are:

  • Durability, service life up to 10 years.
  • Easy to care for.
  • Eco-friendly.
  • Moisture resistance.
  • Fire safety.
  • Resistance to low and high temperatures.
  • Good sound insulation.
  • Can be attached to different surfaces and the like.

Many customers also like the fact that in stores there is a huge number of colors, the panels are applied a variety of drawings. If you want to make an inexpensive but beautiful repair, this material will be a good choice. The main thing is to choose a good manufacturer and pay attention to the presence of possible defects in the goods. Panels are easy to buy and, importantly, is not difficult to install.

There are two main ways by which you can attach plastic panels to the wall:

  • Attaching the panels to the frame. This can be done mechanically, that is, using self-tapping screws, nails or staples. Trim itself can be metal, wood or plastic. You can also glue the panels to the framework, which in this case will play the role of a wall leveler. This method of attachment. to the crate. has its own advantages and disadvantages. Those who do not want to take too long to install the frame and lose precious square centimeters in the bathroom, you can choose another way.
  • Gluing it to the wall. This method has almost no impact on the area of the premises to be renovated. But it has its own limitations. The walls must be even, dry, and the adhesive composition. well chosen, then the repair work will give the right result.

It should be understood that not every glue is suitable for attaching this finishing material. Some of the formulations may damage the plastic, or may not be able to withstand moisture. Therefore, it is better to know in advance than to glue PVC panels to the wall.

Glue for PVC panels: what is the best

Household stores offer a wide range of adhesives. Some of them can not be used for fixing the boards, as they can cause deformation and have a bad impact on their appearance.

But there are a number of compositions that are well suited for attaching plastic panels:

  • Kleiberit 636. It is not afraid of water, when applied, it is necessary to treat only one side. Made of synthetic resins. A big advantage is its health safety.
  • Emfikol 34012A. This glue with a viscous consistency is designed specifically for fixing PVC panels. It has a good adhesion to the material. It is very durable, yet colorless.
  • Moment Crystal. This is a fairly expensive composition, but it will glue the boards to any surface very well. At the same time it is colorless, so this adhesive can safely be used to attach PVC finishing materials.
  • Liquid nails. About this adhesive composition will be described below.

There are other types of adhesives on the market. Some praise Moment Montazh and Titan. When buying it is important to understand that the high price of the compound is not a guarantee that it is suitable for finishing walls with PVC panels. You should carefully read the labeling and instructions of the adhesive, consult with the seller. If even after the purchase there are any doubts, or the product has been purchased before, given as a gift, left over from the last repair, it is better not to take the risk. How the adhesive affects the PVC, you can learn from experience. It is enough to apply the compound to a small surface of the board and see how the plastic reacts to the adhesive.

Liquid nails

Without this fastening compound, probably no repair can do. This agent has also proven itself in finishing works with plastic panels. The use of liquid nails is very simple, and they perfectly attach PVC to the wall or batten. But you have to be careful to choose the right compound when buying. Some means are too strong, and their use can lead to bloating of the plastic surface.

Among the liquid nails, which are usually used to glue finishing materials from PVC, you can name the following:

  • Liquid nails 601. They can be used when working with different types of materials, including PVC. Means dries within 10 minutes, which gives time to correct errors if the board was attached unevenly. However, some masters are not advised to use this compound in the repair of the bathroom and toilet, because it has insufficient resistance to moisture.
  • Liquid Nails 901. This product can be used for both interior and exterior work. Its main advantages are versatility, durability and strength. This composition is capable of holding even heavy coatings.
  • Liquid Nails 915. This substance is ideal for repairs in bathrooms or other rooms where there is high humidity. The composition does not allow water to penetrate to the wall surface, which protects the room from mold and other troubles.

In general, the use of such funds is justified. Perhaps when installing PVC boards and there will be some subtleties. It is better to read the instructions beforehand, so that the PVC will be firmly attached to the wall surface.

How to attach plastic panels to plasterboard

Plastic panels are an excellent material with which you can quickly and easily breathe new life into any surface. They have a small weight and are not sensitive to moisture. Thanks to such properties, the scope of their application is not limited to internal works. The material has been successfully used to decorate summer showers, garages, outbuildings and many other objects. At the same time in the internal finishing of the house it is used quite widely.

Example of finishing the ceiling with plastic panels

Installation of plastic panels on gypsum board is one of the many options for decorative finishing of the premises, which can be done with their own hands in a matter of hours.

Wooden crate

Wooden purlins are easier to install than metal ones. You only need to take care that the laths have an equal thickness. The number of rows is also calculated on the basis of the step (no more than 50 cm). The cross-section of the bars can be arbitrary: it depends on whether it is necessary to mount insulation.

Wooden purlins fasten with screws. The length of the latter depends on the thickness of the bar. It is important to observe the condition. the screw must reach the metal under the drywall, and it can hold there with a thread. The joints of the laths must necessarily converge on the profiles.

It is undesirable to mount in rooms with high humidity panels on a wooden frame. The latter can swell and quickly fall into disrepair. High humidity leads to swelling of the wood, which will cause the brackets to fall out of the slats and will not be able to hold the panels.

How to attach the PVC panels to drywall

If you decide to use plastic as a finishing material for walls, it is useful to understand how to mount the PVC panels on drywall. When installing should adhere to a clear plan of work, because fixing the PVC panels to the drywall must be as strong and durable.

How to Glue Plastic Panels to Plasterboard

To fix the plastic panels on the drywall, use two options for fasteners:

  • Applied panels can be fixed using self-tapping screws;
  • special glue, with the help of which you can fasten the panels on the smooth surface of the walls.

Fastening on screws

The first method requires fixing the overlay panels on the walls of drywall with self-tapping screws. Here you need to find the right support profiles, to which the plasterboard will be attached. it is to them that the plastic will be attached. Plastic panels are attached perpendicular to the profiles. If the profiles are installed vertically, then fasten the PVC panels to the drywall horizontally, using self-tapping screws.

Start the fastening process from the bottom. If the panels are fastened vertically, they should be fastened starting from the left end towards the window or door opening. Both in the first and in the second case the combs of the panels must follow each other in the direction of movement.

Fastening on glue

The second way to solve the problem of “how to fix the PVC panel on drywall” provides for mounting with adhesive. Here you can fix the PVC panels on the drywall in any direction. This method is usually glued PVC panels on drywall in the bathroom. And since plasterboard is a material with a flat surface, then additional alignment of the walls in the room is not required. In the same way the panels are glued to the ceiling.

You can attach the plastic panels to the drywall with liquid nails. The glue must be applied to the back side of the panels in the middle, as well as around the perimeter. When the mixture is well absorbed, the cloth should be glued to the base, pressing down firmly.

As it is possible to fasten the PVC panels to the plasterboard with a staple gun, use it for added strength, if you fasten it with liquid nails. But the panels must be thick, otherwise they can split.

By gluing plastic sheets in this way, you get a flat surface and give the room an attractive look.

Properties of the material and possible options for its installation on drywall

PVC panels were enormously popular at the beginning of the XXI century, when they were used almost everywhere. Kitchens, bathrooms, living rooms, trade halls and corridors were finished with plastic. Today the popularity of this material has significantly diminished and it is used for decoration of technical premises, sanitary rooms and balconies.

Its use provides several advantages, allowing not only to give the room an attractive appearance, but also provide excellent protection of the walls from the effects of moisture. It is fairly simple to install and easily mounted on a finished drywall surface.

Example of fixing PVC on gypsum boardPVC panels are available in different colors and can have a variety of shapes and sizes. The peculiarity of the material is a hollow structure with many ribs and the presence of a special lock that allows the panels to be firmly connected to each other. As a result, the coating becomes monolithic and well resists moisture. Everyone can perform the installation of panels on gypsum board, the main thing is to follow the instructions clearly and responsibly to perform the task.

Each of these methods has its own characteristics, but their effectiveness is at a high level.

Scheme fixing PVC panels on the glueThe first of these methods is preferable, since you can, if necessary, remove the PVC coating, while the second fixes it firmly without the possibility of dismantling. As a result, they can only be broken and torn to pieces.

Mounting of PVC panels on the adhesive: step by step instructions and peculiarities of work

It is quite simple to install PVC panels without purlins directly on drywall. To work with plastic panels can be used polymer or special glue.

In this case the first option is more economical and is not inferior in quality gluing any type of special compositions. The procedure for mounting PVC panels on the adhesive is as follows:

    First, the surface of the drywall should be primed, removing from it the excess dust and dirt. In addition, treatment with special solutions increases the adhesive properties of drywall sheets, so that the adhesive will adhere better to the wall.