How to attach the belt to the trimmer

Belts and belts for trimmers

expensive by the package! Price per pack of 6 pcs.: 2 844 р. Price per unit. 474 р. 519 р.

Competitive price! Price per 6 pack.: 2 040 р. Price per piece. goods: 340 р. 386 р.

It is more favorable by packaging! Price per pack of 6 pcs.: 2 160 р. Price per unit. For: 360 р. 408 р.

Price per pack is more favorable! Price per package of 4 units.: 2 620 р. Price per unit. goods: 655 р. 720 р.

It is more advantageous to pack by the package! Price per pack of 6 units.: 4 566 р. Price per unit. goods: 761 р. 810 р.

It is more profitable in packages! Price per unit 6 units.: 1 578 р. Price per unit. goods: 263 р. 298 р.

Bargain Package! Price for a pack of 4 units.: 1 456 р. Price per unit. 204 р. 413 р.

Best in pack! Price per unit 4 units.: 3 208 р. Price per unit. goods: 802 р. 909 р.

Best in bundles! Price per unit 4 units.: 816 р. Price per unit. 204 rubles. 231 р.

Best in bundle! Price per unit 6 units.: 5 394 р. Price per unit. 241 rubles. 1081 р.

expensive by the package! Price per pack of 6 units.: 7 092 р. Price per unit. Item: 1 182 p. 1366 р.

expensive by the package! Price per unit 6 units.: 3 072 р. Price per unit. goods: 512 р. 581 р.

A better bargain by the package! Price for 4 pack.: 1 852 р. Price per unit. goods: 463 p. 574 р.

You need a trimmer strap to trim the grass quickly and without unnecessary stress on your back and arms. With its help it is much easier to hold the equipment and there is no need to make frequent pauses during work.

For light trimmers (3 to 4 kg)

One of the easiest and most budget-friendly options is a belt. For example, the Makita 351509010 unloading belt is attached to the body around the waist or hips, and the grass trimmer is attached to it with a carabiner. Practically all carrying straps can be attached in this way.

Another uncomplicated device. a belt for a grass trimmer. For example, the EFCO 4606 belt is put around your neck or thrown over your back. This is the safest position for the grass trimmer, because the chance of the equipment slipping off is minimized. Belt length can be adjusted.

Advantages of using a grass trimmer

Using a grass trimmer to build a boat motor has a number of advantages:

  • is much cheaper than a ready-made motor for a boat;
  • minimum fuel consumption;
  • low weight;
  • reliability;
  • tightness of design;
  • the presence of ready-made controls;
  • built-in tank, etc.д.

Because of these qualities, the grass trimmer ranks first among other possible options for remodeling.

Principle of operation

Grass trimmer has a higher speed of rotation of the blades, which makes it possible to move through the water with higher speed, which will allow you to start fishing faster than with a motor. Everyone has seen how a grass trimmer works. how it mows the lawn and regular grass, but here, its blades are twisted in another direction and at the same time, serves as the most economical motor.

But if the grass trimmer is lower, the speed will be lower. But the main disadvantage of trimmers compared to ordinary boat motors is that they are very loud, and they should not be used at full volume, if you do not want to scare the fish.

Backpack strap for grass trimmer. purpose

Many trimmer models come equipped with a regular slash belt. For work, however, it is best to buy a backpack strap that is specially designed for brushcutters. Thanks to its ingenious design, it distributes the weight of the device evenly over the entire body. Padded shoulder pads reduce weight and relieve pain in the forearms. Stiff backrest disperses the load between the upper and lower back, eliminating the lower back. Shock-resistant thigh guard prevents the brushcutter from coming into contact with your foot so it doesn’t chafe and transmit vibration. In addition, the belt provides:

  • Comfortable transport of the grass trimmer;
  • Comfort in operation due to ergonomic positioning of the grasshopper in relation to your body
  • Safe operation. the shoulder strap prevents the brushcutter from slipping out of your hands if you get a hard object under the blade.

Belt adjustment

To ensure a comfortable working environment, you need to know how to put on the backpack belt correctly. This process requires a certain amount of skill, but then, after adapting the backpack for the first time, it will be put on much faster and easier.

Balancing the grass scythe by repositioning the lug

After fixing under yourself the desired height, you need to balance the grass trimmer. To do this, the lug, with which the device is suspended from the belt, is moved forward or backward. As a result, you need to attach the strap to the trimmer so that when you release the handlebar, the knife or saw blade does not lie on the ground, but hangs over it without touching the surface. How far away it will be depends on the goals.

Tip! A distance of 20-30 cm above the ground is suitable for cutting tall grass, and 5-10 cm for lawns.

Cuticles

For manicures, this tool is indispensable. It removes protruding skin so that the nail looks neat and well-groomed. Before the procedure, it is recommended to first steam the skin in hot water with a soapy solution, and then disinfect it. After that you can gently remove the cuticle, but not at the base, so that the skin acts as a natural barrier, protecting it from germs. After the procedure you should liberally smear the treated areas with greasy cream.

How to mow grass with a trimmer?

The main thing is to correctly adjust the grass trimmer belt, so the drum with a fishing line on the ground did not roam.

How to make a correct petrol and oil mixture.

Do not use a line that is too thick. it overloads the grass trimmer and creates unnecessary horsepower.

Do not wind too much fishing line on the reel, and do not wind it too tightly.

From time to time stop and clean the basket

Lubricate the shaft of the grass trimmer and the gear (if fitted) with grease.

I mow with the trimmer from the company Varyag according to the instructions:

Action 1. Adjusting the cutting mechanism.

Depending on the type of weeds we choose the cutting tool: for soft grass. a line for the trimmer, for hard-stemmed and small bushes. a knife. Unscrew the nut securing the cutting mechanism and install the cutting tool. How to put the collar on how to put the grass trimmer belt on how to play correctly. Tighten the nut. the machine is ready to work.

Note: some grass trimmers do not have interchangeable cutting tools, so you can start working with them right away.

Step 2. Getting the grass trimmer ready for work.

If the grass trimmer is electric, charge the battery or plug the engine in. If petrol, fill up the tank with fuel. Then, depending on the type of grass trimmer. adjust it on itself (top-motor. hang it with a loop on the shoulder, backpack. by the shoulders, bottom-motor. take hold of the handles). Hold the grass trimmer above the grass, so that the cutting mechanism is parallel to the area to be mowed. Start the engine.

Grass trimmer works with simple movements. It is important to remember that the cutting mechanism of the device rotates counterclockwise, so that the cut grass will fall on the already treated area. First. from right to left in front of us (this is how we cut the top of the grass). Backpack strap for how to get the right shape How to get the right line on the grass trimmer. The second one is from left to right (this is how we remove the rest of the grass).

attach, belt, trimmer

It is better to divide a large work area into squares, and mow the grass on them, moving from one to another on the outside of each square.

When mowing grass on slopes we recommend mowing from the bottom, moving parallel to the sloping area. Once you’ve reached the edge, go back a little higher and repeat the same route right up to the full mowing.

For mowing grass in an area with trees it is better to use a line cutter, and mowing should be done by going around the perimeter of the area, around the tree trunk.

After you have mowed all the grass on the plot, you need to turn off the engine, remove the grass trimmer (for shoulder and backpack devices), clean the cutting mechanism from the grass residue.

What is a backpack

You need to understand this The weight of a worn hand is 6-9 kg on average. And this device must be in the limb at all times. To distribute the load evenly, the harness seems to surround the body on all sides. The main load falls on your shoulders and back, so its top is supplemented with wide foam inserts and fabric straps. The straps then drop down along the body and use a quick-release clip to connect at the chest or abdomen. And so that the strap does not fit into the body when loaded, a wide and sturdy padding is provided. Attached to the belt is a plastic leg protector. Has a carabiner for attaching to the trimmer and a spring cushion. Easy unbolt and brushcutter attachment provides a quick-release latch on top.

Note! Different models of belt may differ in design of locks, carabiners, presence or absence of additional pads and latches. But the design and principle is the same.

Belt adjustment

To ensure a comfortable working environment, you must be able to wear the backpack properly. This process requires some skill, but then, adjusting the bag to fit for the first time will make it much quicker and easier to put on.

Adjusting the height of the hook

The most important thing is to. adjust the strap so that the grass trimmer is at the correct level from the ground To do this, raise or lower the height of the hook, which is done by tightening the straps until the holder is 10-15 cm below the hips (palm width). In this case, the blade of the attached grasshopper must be parallel to the surface, i.e.е. into a strictly horizontal position.

Note! If the grass trimmer is set too high, this will severely limit the grass grip.

attach, belt, trimmer

Balancing the grasshopper by moving the sapling

After setting the correct height for yourself, you need to balance the grass trimmer. To do this, adjust the ear by which the device is suspended from the strap, forward or backward. As a result, you need to attach the strap to the trimmer so that when you release the handlebar, the knife or saw blade does not lie on the ground, but hangs over it without touching the surface. How it is positioned depends on your goals.

Tip! A distance of 20 to 30 cm above the ground is suitable for tall grass, but 5 to 10 cm for lawns.

Adjusting the shoulder strap

To distribute the load evenly over your shoulders and back, the straps should be properly adjusted. Tighten or loosen the straps sufficiently. it should not burrow into the body or hang. You can see how the weight will be distributed by pushing on the hook to hang the harness.

Attach the hedge trimmer to the belt

Depending on the model, a gas band can be installed on the belt. Using the strap or loop. In the latter case it is necessary to move it along the bar for balance to get the desired result. In some cases, cushioning mechanisms are provided to smooth out vibration and cushion sudden jerky movements.

Balancing handle

An important step in adjusting the belt is also adjusting the handles to the optimal level. When the operator holds the bikes, the arms should be relaxed and the shoulders should be parallel to the body. Therefore, after installing the two-shoulder belt, the two-arm mechanism should be adjusted so that moving it up or down. The result should be that the arms only set the direction and not hold the device. If the balance of the grass trimmer gets out of balance again afterwards, you’ll have to repeat all the steps again.

Walking wheels. grass trimmer attachment relieves the operator

The nozzle for the grass trimmer, which is called the running wheels, is one of the cheapest and simplest, but very useful devices. Its main advantage is to lighten the physical workload when working with a petrol-powered brushcutter. The device consists of two wheels that are connected to each other by a plastic frame. There is a hole in the frame for attaching it to the brushcutter bar. The result is a tool that does not need to be suspended when cutting the grass. Photo of the walking wheels for grass trimmer attachment is shown below.

The attachment is installed on the tool quickly and easily enough. The need for its purchase arises in the case of the need to mow the lawn of a large area. It should be noted right away that the device is not suitable for cases where the mower is used to mow grass in the field. You will need a device with wheels of large diameter, which you can make yourself with your own hands from improvised means.

Homemade trimmer attachment on wheels

To make such a design, you will need to use a shortened boom of up to 1 meter. The remaining structural elements are made from the available parts. There is gas on the control knob, which allows you to control the grass trimmer’s speed while cutting the grass. A more detailed description of making a homemade wheel attachment for grass trimmer is presented in the video material.

From the disadvantages of running wheels, it should be noted the possibility of using them for tools with a bent boom. In addition, such wheels are suitable for mowing low grass with a fishing line (mostly lawn).

Special features

Given the capabilities of the grass trimmer and the attachment itself, work with the attachment is carried out before the period when the weeds have not yet particularly grown and strengthened. So, the work of the user will be more effective, because it is easier to cut low grass, rather than deal with coarse and thick stems. Timely loosening of soil with the help of the nozzle-cultivator will contribute to faster growth and strengthening of planted crops and, as a consequence, high yields.

attach, belt, trimmer

It is important to securely fasten the mowing head to the gasoline grass trimmer. It’s important to bear in mind that not every horticulturist will be able to operate a brushcutter with a tiller head, because of the weight of the grass brush and the attachment. If the machine’s engine is not designed for more than 1500 watts, it should only be used as a ripper or a light hoe. It is important to understand that the attachment for cultivating the soil by means of a gasoline mower in no way replaces the unit for weeding, plowing and hoeing. It is a miniature device for small purposes.

Rotating knives during operation are dangerous enough, and therefore you must work with gasoline trimmer very carefully. Do not try to remove the blades of grass when the device is on. Do this only when the engine is at a complete standstill. Never grasp the hedge trimmer with your hands or try to block it. Timely inspection of the device should be carried out, eliminating damage, as well as worn parts.

To refuel the unit must be outdoors. It is important to make sure there is no oil or fuel leakage. Do not allow the engine to overheat. While working, the operator must stay away from the rotating elements, because the cutters can damage their extremities. Before you start the work, you need to inspect the territory of the future treatment and rid it of solid objects. For example, it is advisable to get rid of stones, which can cause the milling machine to stop or even break down.

If this happens, you should immediately stop the machine and inspect it for damage. Do not operate a broken appliance.

Learn more about the attachment-cultivator for gasoline trimmer in the video below.

All owners of homestead plots face the problem of mowing the grass, which literally grows before their eyes, and during the season you need to improve your site several times. Gasoline trimmers and electric trimmers came to replace ordinary hand-held mowers long time ago. But the price for them is not reduced and is quite tangible for many owners of summer cottages and private houses. Folk craftsmen have still found a way out of this situation and learned to do with their own hands trimmers for grass literally from improvised means, using gasoline and electric tools, not intended for this purpose.

Features of brushcutter discs

Blade discs are available in plastic and metal, and in different shapes to perform a variety of tasks.

  • Two-, three- and four-blade blades with distinctive blades are used for mowing grass and brushwood. However, they are not suitable for making hay, because they shred the shoots by chopping them several times.
  • Massive four-blade discs are designed not only for clearing the ground from the grass, but also for mowing hay. They prevent the shoots from being repeatedly cut, thus making them suitable for harvesting for the winter.
  • Discs with cutting edges on the circumference are best for cutting reeds and rushes. These blades are very heavy. a necessary quality for cutting through thick stems.
  • Professional sawtooth blades for brushcutters and brush cutters can cut small trees and bushes.

Plastic blades are used as an alternative to metal discs. They do not need to be firmly fixed in the head, and they rotate as a result of centrifugal force. The durability of plastic blades is high, so they have a long service life.

attach, belt, trimmer

Also for your information! The advantage of plastic discs is that when they hit an insurmountable obstacle, they bounce and there is no re-contact.

How to install the blade on the grass trimmer

The installation of the blade on the grass trimmer is very easy. To do this, use the complete wrench, disconnecting the cutting head, and the pin locking the gearbox. The procedure is as follows.

  • First of all, you should unplug the electric grass trimmer, gasoline trimmer. just turn it off. Remove and set aside the blade guard.
  • Then align the holes on the gearbox and the shaft, to stick a pin in them and block the drive.
  • If you used a bobbin with a fishing line, unscrew it clockwise.
  • Then you need to find the nut to tighten the blade.
  • Next step is to install the blades. Trimmer owners often wonder which side to put the disc. Do this so that the marking with the numbers and letters on top.
  • Then put the dust cap on top, and above it a fixing nut, which should be tightened firmly with a wrench.
  • Install the blade guard as a final step.

As you can see, the procedure is very simple and the same for many brands, whether the equipment is “STIHL” or Husqvarna.

For your information! If the owner of the device wishes to replace the disk back to the line for the trimmer, you can install the spool with it in a similar way.

How to adjust the trimmer mounts

To begin with, some lawn mowers, especially those of Chinese origin, are simply impossible to balance because the boom and handles are too small, there are no adjustments and the support belt. Let us dwell on the last item in more detail.

Usually, the complete set of brushcutters come with oblique belts (sometimes they are absent at all). However, professionals prefer special backpack straps that are designed to distribute the load evenly over the body. That’s why it makes sense to buy a backpack belt. especially if you regularly mow large areas.

In any case, before starting to work with a brushcutter, it is necessary to adjust the belt so that comfortable working conditions are ensured:

  • The hook should be just below. at palm width (10-15 centimeters). your hips in a strictly horizontal position.
  • Hang the chain saw on the belt between the engine and the handles.
  • The device is balanced and secured by means of a bar or a hinge. In the latter case, finer adjustments can be made by moving a loop on the boom.

Ideally, after these adjustments, the chainsaw should hang loosely on the belt without touching the ground or scooting upward. In this case the distance to the ground depends on the task in hand. when mowing lawns 5 to 10 cm is enough, but when working with tall grass it is necessary to leave 20 to 30 cm.

If you use a shoulder harness, you must also adjust the shoulder straps, which should not dig into your body or loosen the slack during work. If you have problems with the adjustment of the backpack belt, it is worth looking in the instruction manual. The boom should also be positioned so that it does not accidentally overlap the engine exhaust system.

Handle adjustment lies in the selection of such a position in which the hands will not hold the tool in weight, but only set the direction. In doing so, you need to let the push bar move freely so that the handle does not strike your leg when mowing.

Attention. If, after adjusting the handles, the balancing of the lawnmower becomes out of balance, then all the steps of setting up the tool will have to be repeated again.

How to hold the brushcutter correctly

Once the tool is fully balanced and the operator is wearing protective gear and an off-duty harness, you can start the tool, attach it to the harness, and begin mowing the grass directly, observing the following guidelines:

  • Hold the filament spool or disc at a constant distance from the ground, depending on the type of work involved (see above);
  • The bar must move slowly in a duck’s pace when mowing;
  • The pushing movement of the boom must be smooth and not too quick;
  • Avoid swinging too much so that the handle does not strike your leg;
  • It is better to mow in the direction in which the trimmer line or disc rotates;
  • if the chainsaw can’t handle tall grass, make two passes. first mow the top and then the bottom;
  • it does not make sense to keep the revolutions at the same level (if we are talking about a disc, not a cord coil), because you can significantly save on fuel when you reset them on the backward motion.

We hope that these simple tips will help users learn how to operate a chainsaw correctly. After all, with this tool, with the right approach, you can quickly improve the household or garden plot so that after this work “nothing hurts”.