How to Bred Circular Saws

• 1 Why make a saw
• 2 Wiring Methods
• 3 sharpening
• 4 Saw care
• 5 Types of Band Saws

Band saws are often sold in unfinished condition. A professional tool must first be diluted and then sharpened. Once every two to three years, the wiring process is repeated. An improperly diluted and poorly sharpened saw can ruin all the work.

How to sharpen and breed the saw correctly? First you need to understand the essence of these processes. After all, the preparation of a hand tool is different from the preparation of an electric one. Hand saws have a completely different tooth shape and working technique.

Why make a saw

Saw layout

Wiring is such a process, as a result of which the teeth of the band saw are bent in different directions. Even teeth bend in one direction, odd. In the other.

Before you breed a band saw, you need to understand why this is necessary. Meaningless processes usually do not bring a good result. It is known that during sawing, the width of the cut should be twice as large as the thickness of the saw blade. If there is already a cut, then the saw will start to get stuck in it. If the wiring is incorrect, the web may bend. As a result, the saw will go crooked, and a smooth cut will not work.

Wiring Methods

Ways One of the easiest ways to breed saw teeth is with pliers. You just need to take each clove and bend alternately in different directions.

The tooth must be clamped by two-thirds, then the bias will be correct.

As a result of this work, half of the teeth will be bent to the right, and half to the left. Another wiring method is carried out using a special tool.

Sharpening

After breeding, the saw must be sharpened. This is done using a special set of simple tools. You can sharpen a band saw using a regular trihedral file. During sharpening, moving the file away from you, it is pressed to the teeth. Moving in the opposite direction, it should be slightly rejected.

If you can sharpen a circular saw only with the help of a whole set of tools, the band saw can be brought into working condition with just one simple trihedral file.

The teeth of the band saw should be pointed from two vertices.

In the working process, you can also grind the teeth using a bar. When the saw is constantly sharpened, the wiring gradually disappears, the cloves are aligned. In order to return the instrument to its working form, the dilution is repeated again. Major wiring and sharpening is not required very often.

Saw Care

Care It is important for a saw to be able to not only breed and sharpen. You must also be able to store it. When the tool is not in use, it should be placed in a warm and dry place. If moisture gets on the saw, it will rust.

Even processed with special compounds, the saw will not be able to withstand all aggressive factors.

You need to be careful about the tool, and then it will serve for a very long time. A saw usually wrapped in material is stored. You can also provide a case for her. Leaving the tool for winter at BAL-KO is not recommended.

Types of Band Saws

Two-handed saw

Band saws vary in tooth size. You should also highlight:

Two-handed saws are sharpened and bred in the same way as ordinary single saws. The whole difference of such an instrument is that two people work with it at once.

Using band saws, wood and varieties of this material are most often sawn. The tree does not require too much impact, it is a soft material that is easily sawn and drilled. However, in the process, it is desirable to still secure the logs and boards. During sawing, be careful not to keep your hand too close to the groove of the saw. This could result in serious injury.