How to Change Fishing Line On Champion Petrol Trimmer

A type of lawn engine, such as a trimmer, It is divided into several main categories: gasoline, battery, mechanical and electric. Each of them has a unique structure.

In gasoline ICE the fuel mixes with air until it enters the cylinder and then ignites from the spark of the spark plug. Power is controlled by the amount of mixture supplied, using the knob or gas pedal. A gasoline engine has a high speed and specific power with relatively low noise. Differs in simplicity of design. The main disadvantage. Fuel consumption.

Electrical engine It is issued not only by environmentally friendly work, but also by significantly lower noise level. For the electric motor to work, it is necessary to connect it to a power source, for example, a voltage of 220-380 volts to the mains.

The advantage of the battery type engine The fact is that you do not need a permanent connection to the mains. The tool allows you to carry out intensive work until the battery runs out.

Engine capacity (working volume) trimmers. This is one of the most important characteristics of an internal combustion engine (ICE). Ice converts the energy received from the combustion of fuel into mechanical. This process takes place in the combustion chamber (cylinder) of the engine. Further, mechanical energy is transmitted through various units and assemblies to the wheels of lawn equipment (lawn mowers, aerators, verticutters, etc.). The cylinder volume or the sum of the cylinder volumes determines the engine size. Its power largely depends on the volume of the engine, since when a larger volume of the fuel mixture is burned, much more energy is released. With a larger engine capacity, the engine resource is higher, since it does not have to work to the limit.

Trimmer Fuel Tank Volume. An important characteristic for the engine, which is responsible for the duration of work. A fuel tank is a tank for storing and returning fuel (gasoline, diesel fuel) to an internal combustion engine. In the manufacture of fuel tanks are mainly used steel, plastic or aluminum.

If the tank volume is too small, then there is a need for frequent stops of work for refueling. The more powerful the engine, the greater the consumption of the combustible mixture, respectively, the larger the tank must be in order to continuously process the necessary territory. Tank capacity is measured in liters.

Trimmers are gasoline, electric or even rechargeable. They are equipped with engines that have different location. Most petrol trimmer models have top engine. Top engine trimmers are more practical, properly balanced and have high power, which is great for intensive lawn processing. Such engines have good cooling and are equipped to the maximum against mechanical damage and moisture.

With engine bottom, As a rule, electric trimmer models are available. They are characterized by low power and small overall dimensions. They are also poorly cooled and have some limitations on the duration of work. They have no protection against moisture and mechanical damage.

For ease of understanding, power internal combustion engines is usually measured in horsepower (l.With.) The more powerful the lawn engine, the greater the amount of hard work in less time it will be able to perform. But for heavy work, it is worth considering the torque achieved at certain engine speeds, since the pulling force depends on it and the higher the torque (measured in Newton meters), the easier it will be for your machine to cope with hard work.When choosing lawn equipment (lawn mowers, lawn mowers, aerators) with a certain power, you need to take into account: the type and number of work performed, the size of the plot, soil properties.

READ  Tuning The Carburetor Of The Champion 137 Chainsaw

Trimmer motor power, adjustable by pressing the pedal or throttle. The more you press, the more fuel is supplied. The air mixture into the combustion chamber, accordingly, the power grows. The effectiveness of the internal combustion engine trimmer, measured fuel consumption in grams to produce kilowatts per hour.

Modern trimmers designed to care the lawn, depending on the model can be equipped with various cutting elements, which can be used for mowing a variety of vegetation.The most common nozzle is considered fishing line or, as it is also called cord. The main purpose: mowing grass, in not very neglected areas (it is convenient to bypass fences, trees, buildings). It is wound on a special head, with the release of a pair of ends that serve as a cutting tool. They can be from 0.8 to 5 mm thick. Thick fishing lines are used on powerful gas trimmers and can cut large weeds, thick stems of dried grass and soft young growth of small shrubs. Fishing line up to 2 millimeters is mainly used on electric trimmers, as they have a less powerful engine and design.According to the method of release, fishing lines are divided into: manual, semi-automatic (the cord is extended from the head when the operator presses it to the ground) and automatic (the fishing line is extended to the desired length when gaining speed). In the latter case, there is a large consumption of fishing line, so the most popular are semi-automatic models.In the case when it is necessary to cut thicker grass or shrubs, a knife or disk is used. The knife can be made of plastic or metal and have a different number of blades. For the most difficult work (shrubs, small young trees), metal discs with a large number of teeth are used. Some models of trimmers can be equipped with a nozzle with a saw (height cutter), which is designed to cut tree branches.The ability to use knives and a blade depends on the engine power and the design of the trimmer, you must strictly follow the instructions. On models with a curved bar, fishing lines and small plastic knives can be used.Metal knives and discs are used on straight-bar trimmers. Since this design is safer for the operator (the greater the distance from the cutting head, a special handle, a stop). When a knife or disk collides with a hard surface, it is often thrown back. In addition, a heavier tool creates a greater load on the nodes and components of the trimmer.

READ  How to Pull Fishing Line Out of Patriot Trimmer Coil

Trimmer Cutting Width. The width of the mowed grass of the cutting element in one revolution. The larger the cutting element, the correspondingly, the more the treated area it captures during operation. The large mowing width is great for processing large open areas, in just a few passes you will finish the job.

Trimmer handle Designed for convenient trimmer control. It can be equipped with additional buttons that are responsible for the operation of the tool. The handle can be of various shapes: D-shaped, J-shaped, U-shaped, Y-shaped.

For instance, D-shaped handle great for handling small areas, but at the same time it requires high maneuverability from the operator. J-handle prevents approaching the bevel gear. This handle is ideal for working with a grass knife. The combination of these elements will make your work more productive and convenient.

Y and U shaped handles. The most popular trimmer handles, which are great for mowing in open space, while the mowing movements will be similar to the mowing movement of an ordinary scythe.

Thickness used fishing line on the trimmer, mainly depends on the type and power of the engine. So, fishing lines with a thickness of 1.2. 2 mm are used on trimmers, and on trimmers equipped with more powerful and unpretentious gasoline engines, powerful and strong fishing lines with a thickness of 2.4-3.5 mm are installed, which can cope with thick stems, weeds and dead wood. If you use a fishing line with a thickness greater or lesser than specified in the technical specifications of the trimmer, then rapid wear of the components and components of the power plant is possible.

Weight. This is the mass of the machine in the assembled state (measured in kilograms). Despite the apparent insignificance of this parameter, it is worth paying attention to this important property of garden equipment. Weight affects mobility and quality. Lawn machinery. Too much weight can cause difficulties when unloading and loading into a car. A more heavy-duty vehicle may be required. Larger weight requires a more powerful engine with high fuel consumption. However, with a small mass, problems may arise, for example, with the quality of mowing the lawn.

Trimmers equipped with internal combustion engines (ICE) during garden work they make a certain noise, which has an adverse effect on the human body. Noise level measured in decibels (dB). Noise above 85 dB can cause discomfort in a person, and prolonged exposure to this level of noise can lead to hearing loss. Therefore, the operator working with this technique is recommended to use special anti-noise headphones. Diesel and gasoline engines make a lot more noise than electric engines, but they do a better job of hard work.

Champion T374FS gasoline trimmer is a modern model that will help to tidy up your garden and improve the area near the house. The trimmer is equipped with a reliable gasoline engine, which does not require special attention. A fuel tank with a volume of 0.95 liters allows you to use the trimmer during intensive work, without stopping to refuel. Ergonomic handles sit securely in the hand, providing convenient control of the device, eliminating slipping. Having bought this model, you will get a reliable tool that will delight you with its quality and high performance.

READ  How to Lubricate a Stihl Gasoline Trimmer Rod Shaft

Reliable gas engine
All controls on hand
Ergonomic handles
Capacious fuel tank.

How to Change Fishing Line On Champion Petrol Trimmer


October 26, 2018

No need to mix gasoline with oil
It’s good for hot
Noise vibration when working quieter than from a two-stroke trimmer
price / quality ratio
The knife in the kit is good, only you need to sharpen
Not large branches cuts down well.
Purchased on 09.09.2012.

The standard belt is not comfortable
It takes a little time to break in (change oil more often)
Weak for thick grass (old and new), begins to stop. Where I already mowed in the spring, then in the autumn everything mows well without problems.
Slightly heavy, get tired quickly
Established reel is not very good (fishing line from hitting the ground is not fed, the grass is badly mowed). I set the HUSQVARNA 128R to mow the start much better and the fishing line does not break after 5 minutes of operation.

I am satisfied with the purchase. Time will tell how long the trimmer lasts.
Before work, immediately added grease to the lower gear.
For a small plot, the best option.

1. Easy to start2. No need to add gasoline and oil.3. Powerful. Mows tall, thick grass with a bang.
4. Build quality is good. Nothing hangs anywhere. The design is comfortable.5. 4-stroke engine. An exact copy of the HONDA GX35.

Slightly heavy, 8.5 kg when equipped. But you get used to it and it’s normal.

The mower has already served 2 years, a plot of 18 acres with dense grass. Power is more than enough. On the hot start with one pull starter. It is pulling, not a jerk. On the cold with two. Over, the cold shutter can not be closed. And so it works. Noise and vibration are much less than 2-stroke. Very pleased with the scythe.
Before that, there were 3 Chinese 2 tactics, heaven and earth. They were not enough for 2 seasons, the piston was erased and did not start on a hot one.

October 4, 2017

I really love Champion gardening manufacturer. The technique is done for people, as for themselves. And with pleasure I have been buying here 2 times already. This time, the trimmer: a new successful model, it looks decent, there is an anti-vibration system, which is cool. And generally mow the plot quickly)From small flaws: one-piece bar. If a small car is necessary to transport it, then there will be inconvenience.In general, I think this model is optimal in terms of price / quality ratio, of course, taking into account my personal preferences.



Delivery in Novosibirsk. 500 rubles.

The cost of delivery to the transport company is 300 rubles. Specify the cost of delivery to your city from managers.