How to charge a trimmer for grass with fishing line STIHL. Two working antennae

STIHL Electriccations: characteristics, customs and operation tips

STIHL garden technique has long established itself in the agricultural market. Electric trimmers for the grass of this company are characterized by quality, reliability, stable work even at high load. The STIHL electric power line is convenient to operate and easy to maintain. This gives a great opportunity to use the technique even to a beginner.

The assortment of the company’s braids is diverse. The company constantly increases the efficiency of using its products. Consider the main features of the popular options for mowers of the presented company.

Battery lawn mower

The ideal option for someone who does not want to breathe gasoline exhausts, and also depend on electricity. The unit consists of a durable polymer case and a compact grass collector. The volume of the grass collector depends on the model.

Such devices are silent, reliable and safe to use and.

Electric version of braids for grass

Self.propelled type of these units can be used anywhere, but only next to the power supply. Silent, they are often used near schools, kindergartens, as well as hospitals and clinics. They are quite actively used in private territory.

The models are easy to manage, have a low noise level, high reliability, as well as an acceptable price.

Popular models of electrocos

One of the popular options is the STIHL FSE-81 Elekhil. This is one of the most powerful trimmers for the lawn. This device includes Autocut C5-2. intended for work in small areas. It is convenient to mow it next to the flower beds, borders. She clears the territory near shrubs and trees well, and also carefully processes paths.

This braid for grass has a number of advantages that are that it regulates the revolutions using electronics. The design allows you to save the trees from damage. The circular handle allows you to perform efficient work, maneuver, and also mow in hard.to.reach places. It is easy to transport.

There are other options that have established themselves in work in horticultural plots.

FSE 60

Mowing grass up to 36 cm. Speed ​​up to 7400 rpmers per minute. Power is 540 watts. The case is plastic. Telescopic pen. Inexpensive, but practical tool.

FSE 31

Light and cheap unit. Ideal for processing a small territory. It is better for them to collect, mow grass after a lawn mower.

FSE 52

The mechanism of the hinge type, so that the device leans in different directions. A reel coil can be placed perpendicular to the ground. There are no ventilation slots, which protects the device from water, so the grass can be mowed in the early morning (when dew) or immediately after rain.

What need to do:

Before disassembling a trimmer head, it is necessary to drown out the engine of a gasoline trimmer for grass or disconnected from the network if an electric trimmer for grass. Turn the trimmer for the grass, putting it on the steering wheel so that the trimmer head “looked” up for the convenience of disassembling it. Press on the sides of the trimmer head and remove the lid.

Remove the drum (coil) from the trimmer head and remove the remaining fishing line from it (there may remain a piece of fishing line) and clean the lid, body and reel from the soil and grass.

Buy a fishing line for a trimmer for a trimmer head in a service center at your dealer, in a store or on the market. The diameter of the fishing line, the shape of its cross section and the recommended brand see. In the user guide of his trimmer for grass and in price level.

To measure and cut off the desired length of the fishing line from the purchased bay (see. User manual in his trimmer, usually 15 m). Find the middle of the fishing line, folding it in half.

The formed loop to hook the fishing line for the neckline on the inside of the drum and first wind one half of the fishing line on one side of the drum, and then the second half of the fishing line on the second side of the drum. The ends of the wound fishing line, so that they do not unwind, fix it, inserting them into the cuts on the edges of the drum of the trimmer head.

The drum is inserted into the previously removed cover of the trimmer head and remove the ends of the fishing line through the holes provided in the lid (usually these holes have a metal edging, since they experience strong shock and abrasion effects from chopping grass and constantly moving fishing line). Insert a cover with a wound drum on the base of the trimmer head and snap.

Pull with both hands by the ends of the fishing line until it stops. If the working ends of the fishing line are longer than normal, then at the first turns they will part on the cutting knife, which are usually on the plastic protection of the trimmer for the grass.

Preliminary preparation

First, for winding the fishing line, it is necessary to remove the coil (bobbin, spool) from the trimmer for the grass. certain acts will depend on the difficulty of configuration and the type of product itself:

• Small electronic trimmers for grass with a working location of the motor and coils at the bottom, usually have side buttons on both sides of the bobbin. With the simultaneous press on their highest part of the coil, coupled with the internal contents for winding the fishing line is disconnected, while the lower one remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring does not jump out and not be lost;
• Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, usually have coils with a special lamb: in similar structures, you should with one hand with one hand to hold the rogue in a motionless position, and the other counterclockwise twist the fixing bobbin on the staging barack. How to refuel a fishing line for a trimmer trimmer for grass? How to refuel a fishing line for a trimmer to a trimmer coil for grass. It is clear how to charge a fishing line for a trimmer for a trimmer for grass. After disconnecting the nut, the whole bobin is removed.
• Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and with unhurried rotation, such mutual placement is achieved when the screwdriver enters the holes and the bobin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third options of coil, depending on the design, are versed in different methods. In the bobbins with a lamb, lamb is twisted, in the reels with the latches, the fixers are pressed and one part of the coil is freed from the other. How to refuel a fishing line for a trimmer in how it is a correct cheap fishing line for a trimmer. 2. On your site. If the halves of the spool are connected by thread, then they are quite turned with their hands in the back sides until they are completely developed.

Master class: weaving from wire pendant “Tree of life

Spring fully entered into its legal rights and we considered that today’s master class on weaving the wonderful pendant “Tree of Life” from the wire would have to be just in the topic. After all, what is spring, if not a revival of life after a long sleep? The ancients unsusually imagined the annual cycle of the seasons precisely as a consistent movement of nature from birth to death, and spring quite naturally symbolized its birth.

The very symbol of the “Tree of Life” is found in almost all world cultures.

Be that as it may, the image of the tree has a unambiguously positive meaning, symbolizing the unity of nature and the eternal cycle of life.

In our master class, we will use the Celtic version of this symbol, which in the modern world is most widely used and is often used in the production of decorative products, jewelry and cult attributes.

We wish you a pleasant and, most importantly, successful creativity!

Sketches “Tree of Life”, they are quite easy to find on the Internet.

The first way

The prepared segment (in this case, it is 4 meters) is bent approximately in half-one segment should be 15-20 cm longer, and inserted into a special gap located on the dividing partition.

A fishing line for a trimmer is wound in a particular direction. This is done in an interference, the fishing line for the trimmer is neatly distributed. In this case, you need to wind the segment, which is longer into the section, which is closer to the button.

There are designs in which there is no division of the coil into two sections. This does not change anything, the fishing line for the trimmer is wound in a similar way. It is only necessary to ensure that the segments do not overlap among themselves.

The first should end the segment that is located at the bottom of the coil, t.e. closer to the fixing holes.

This tip is placed in the corresponding diameter hole. Trimmer fishing line is reliably fixed.

A long segment wraps another half turn. There it is similarly fixed. At the same time, the segment crosses another coil section.

A long segment wraps another half turn

The fixed ends of the wound fishing line are inserted into the holes of the trimmer’s corps of the grass.

The fixed ends of the wound fishing line are inserted into the holes of the trimmer’s corps of the grass

The coil is attached to the body. The ends of the fishing line are pulled with force so that the fishing line previously recorded in the holes of the coil of the fishing. This is easily determined by the characteristic sound (click).

The coil with the button is snapped in the corps of the trimmer’s trammer for the grass.

The coil with the button is snapped in the corps of the trimmer’s trammer for the grass

The replacement of the fishing line was successfully made. In this case, you need to install it back on a trimmer for grass and you can proceed to the span of grass.

It should be repeated, you do not need to remove the spool from the trimmer for the grass. this was done to clarify the process of replacing fishing line. You can disassemble the rogue in place, wind it up and put it back.

The tips so that they do not beat the trimmer casing for the grass, you can and should be cut.

Removing and disassembling the coil

The braid trimmer head consists of a casing, a spring (not in every model), bobbins with a cord, cover. Before proceeding to disassemble the coil of the electric unit, be sure to turn off the trimmer for the grass from the network. The disassembly method depends on the mounting of the mowing head. First option:

• To remove the lid covering the inside of the head, click on the latches (latches), which are located on its two sides.
• Remove the lid under which you will see the spool. remove it from the body. Some trimmers have a spring under the bobbin coils, which should also be carefully pulled out.
• Removing the bobbin, you will see the screw in the center of the case. Unscrew it with a screwdriver.
• After extracting the fasteners, take the case body and, shaking it in different directions, remove the gearbox from the shaft.

In the second version, the head of the trimmer for the grass is twisted onto the shaft of the gearbox. To remove it, you need to fix the shaft. To do this, in such devices there is a hole through which a thin screwdriver or metal rod is inserted. Brief Instruction:

• Insert a screwdriver into a special hole, then stall the shaft.
• Get the body of the head and start twist it. This should be done clockwise, t. to. Larva shaft thread.

Popular models of electrocos

One of the popular options is the STIHL FSE-81 Elekhil. This is one of the most powerful trimmers for the lawn. This device includes the Autocut C5-2 coser, designed to work in small areas. It is convenient to mow it next to the flower beds, borders. She clears the territory near shrubs and trees well, and also carefully processes paths.

This braid for grass has a number of advantages that are that it regulates the revolutions using electronics. The design allows you to save the trees from damage. The circular handle allows you to perform efficient work, maneuver, and also mow in hard.to.reach places. It is easy to transport.

There are other options that have established themselves in work in horticultural plots.

The main malfunctions of the coil

Users of the electrimmer and lawn mower often face a problem associated with a semi.automatic braid head. Coil malfunctions can be as follows:

The assortment of the company’s braids is diverse. The company constantly increases the efficiency of using its products. Consider the main features of the popular options for mowers of the presented company.

The cord spontaneously lengthens

There are situations when a user of a trimmer for grass notices a very fast fishing line consumption. At the same time, he never hit the ground with a button to lengthen the fishing line. The reason that the fishing line for a trimmer spontaneously lengthens, cutting off a special knife on the casing of the device, may be the absence of a spring in a mowing head. Often beginner users of mowers, trying to charge a fishing line for a trimmer into a coil, forget to install a clamping spring in the head, or completely lose it when opening the lid, and in the future, they do not even suspect its existence.

Also, a fishing line for a trimmer can lengthen without using a button if the spring is weakened. If the spring check confirmed this fact, then it is necessary to put several goals under it to strengthen its clamping properties.

The choice of fishing line

In order for the dressing of the fishing line to the trimmer head to be successful, it is important not to fail to choose the consumer material. The thicker the cord you refuel, the more thick and hard grass it can cut. A universal fishing line for a trimmer is often used, the diameter of which is 2 mm

You can choose the diameter suitable for the mower in the following ways:

A universal fishing line for a trimmer is often used, the diameter of which is 2 mm. You can choose the diameter suitable for the mower in the following ways:

See the information about the thickness of the fishing line in the instructions attached to the trimmer

Pay attention to the squash itself. Sometimes information is applied on it about possible fishing line diameters

Another option is to try to insert the cord into the output

If it easily passes into it, then the selected fishing diameter is suitable for use.

You can choose a cord thread by type of engine. If the fishing line for the trimmer is too thick, then the resistance to rotation will increase. the engine in this case will overheat and will soon fail. Useful recommendations:

• For an electric device with an engine of less than 500 in, a thread of 1.3 mm thick is suitable. If this was not found, then you can use a fishing line for a trimmer by 1.6 mm. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
• The gasoline trimmer for grass has a shaft mower. For the bent version, the cord for 2 mm is often used. If the shaft is straight, then set the thread 2.4–2.5 or 3 mm. The thickest fishing line for a trimmer is installed on powerful devices. from 1.3 kW.

Read how to put a carburetor on a trimmer for grass

Pay attention to the type of cross section of the cordry thread. Some popular options:

• The most common fishing lines with a round section. They mow fresh herbs well, but they cope worse with shrubs, drows.
• Twisted (spiral) cord does not differ in high strength, but well suitable for thin young grass.
• The jagged thread with sharp edges is ideal for a large weeds in a neglected area.
• You can mow the lawn in a rectangular, starry or square fishing line for a trimmer for grass, but they are not very durable.
• The most durable is a two.component cord with an internal core and a round section.

Keep in mind that it is impossible to use wire, metal strings and cables, as well as an ordinary fishing thread. The device will be dangerous for both the user and for others. So the cable or similar products will gradually begin to shut down, as a result, their ends will be reacted, and small pieces will scatter at high speed.

Publications

Device and adjustment of the carburetor on benzocos and trimmers

Sapun on a gas station what is and where it is

What is the difference between a two.stroke engine and what is 4MIX and 2MIX

Do.it.yourself pylorama from a chainsaw how to make it quickly and easy

The power of the model

Light and compact household devices to combat grass on a section of less than 15 acres have a power up to 1 liter.With. Such an indicator is enough for a cottage, a small lawn.

Power within 1. 3 l.With. necessary to combat shrubs, thin branches. This is an indicator of industrial and universal units. They have a greater resource of work, weight, some models can create a high level of noise.

If you need to get rid of the young shoots of trees, the thick branches of the shrub use lawn mowers with a capacity of more than 3 liters.With. These are heavy devices for working with which large physical efforts are required. The advantages of such mowers are a large supply of fuel, separate gas station and oil, high productivity.

Model with a shoulder belt for ease of use

Choosing a cord

There are general rules for choosing a fishing line for a trimmer for grass.

• If a trimmer for grass for grass is a gasoline engine with a power of less than 500 V, choose a working thread with a thickness of 1.3 mm.
• For a motor for more than 1,000 in, use a cord with a diameter of 2 mm.
• If the working shaft is curved, a 2 mm thick thread is suitable. For direct. 2.4. 3 mm.
• When choosing a fishing line for a trimmer, take into account the section. For young and thin grass, use a cord in the shape of a spiral. If you cut the thickets of weeds, install a fishing line for a trimmer with a jagged section. Use a rectangular thread to give the lawn a flat surface, but such a thread is not strong. To eliminate complex thickets, use a fishing line for a round section with an internal wire.

It is better not to change the fishing line for a trimmer for a metal wire. This can disable a tool, as well as injure in the event of a break.

How the head with a fishing line on a motorcycle works why you need to know the principle of work

Depending on the manufacturer, the heads differ structurally not only externally, but also inside. Most drums have a clamping spring inside (semi.automatic and automatic). The instruction is presented above how to disassemble the head of the trimmer for grass without a spring, t.e. on a manual.type head. The principle of dismantling a semi.automatic head with a spring inside almost identical above described instructions.

The principle of operation of the semi.automatic coil of the trimmer for the grass is as follows:

• Inside the head is a coil, which is planted on slots that prevent its free movement
• The coil is affected by a spring that presses it to the slots located in the design of the cover
• A fishing line for a trimmer is wound for a tip, the length of which depends on the tool itself. Usually this length is from 1 to 4 meters
• During the work, if it is necessary to increase the length of the fishing line, the protruding part of the drum occurs, through which it comes out of the hook with the slots. In this case, the fishing line for the trimmer is wound from the drum, increasing in the length
• Having released the required amount of fishing line, you should release the pressing, and continue to perform work on the injection of the grass

The advantage of the tool with a fishing line is that this consumable does not require sharpening compared to metal disks. In addition, if a stone or tree comes across the way, then the fishing line for a trimmer simply breaks off, without having a negative effect on the gearbox and the engine engine, as is the case with metal cutting discs.

Knowing the design and device of the types of mowing or trimmer heads, it is necessary to proceed to the consideration of the process of refueling the fishing line into the coil of the trimmer for the grass. After all, it is precisely this moment that most owners of the Special Instruction causes difficulties.

Preparation. remove and disassemble the rogue

In most models of electroly and benzotrimmers, to replace the fishing line, you will need to remove the coil. Fubag tool allows you to skip this stage. For the instruction to be universal, we will still consider it in detail:

Fix the shaft. Insert a stop element into the corresponding hole. They may be a thin screwdriver or a metal rod.

Unscrew the spool body. In our example. strictly in the direction clockwise.

Unscrew the lid in accordance with the direction indicated on the case.

The preparatory stage has been passed. You can go to the winding of the fishing line.

Types of trimmer heads for coils

The main elements of the trigger is a mowing spike, which is a cylindrical case with a coil inserted inside (bobbin). A fishing line for a trimmer (cord) is refueling into it. The heads differ from each other in the method of supply and refueling of the cord. There are three types of heads in total:

• Automatic.The fishing line is submitted after that, as the user reduces engine speed. Automatic supply of the cord is very convenient when you need to do a large amount of work. The minus of such a head is a large thread consumption.
• Semi.automatic.The use of such a head does not require the user to perform any complex manipulations. The principle of its operation is arranged so that the fishing line for a trimmer begins to automatically lengthen at a time when a trimmer for grass works at full speed. It is only necessary to slightly hit the apparatus with the head on the ground (this will remove the locking of the fishing line), and the cord due to centrifugal force will move out of the bobbin. Then the fishing line for the trimmer is cut to the required length with a knife, which is located on a protective casing.
• Manual.To lengthen the cord, it is necessary to stop the device. After that, the fishing line for the trimmer will need to be pulled manually.

How to remove and disassemble a coil

Before proceeding to the process of replacing the cord, users of trimmers need to remove and disassemble the coil. Consider how to do it.

The mowing head of a trimmer for grass consists of several parts: a casing, springs (not in all models), bobbins with a cord and cover.

Attention! Before proceeding with any actions to maintain an electric unit, it must be disconnected from the network.

Trimmers most often use 2 options for fastening a mowing head.

Option

To remove the head of the trimmer for the grass, it will require its complete disassembly.

• To remove the lid covering the inside of the head, it is necessary to press on the latch (latches) located on its two sides.
• Removing the lid, you will see the spool that must be removed from the body. In some coils, a spring is installed under the bobbin, which must be carefully pulled out so as not to lose it in the grass.
• Removing the bobbin, in the center of the case you will see a screw with a slot under a cross.shaped or flat screwdriver. It is possible that there may be a bolt under the hexagon or nozzle “Asterisk”.
• Using a screwdriver, choosing the necessary bat (nozzle), you need to unscrew the bolt (counterclockwise).
• After extracting the fasteners, take up the part of the part and, shaking it in different directions, remove the gearbox from the shaft.

Option

In this version, the head is twisted onto the gear shaft. To remove it, you need to fix this shaft. To do this, in such trimmers, for example, in the Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.

So, to remove the bobbin, take 2 simple steps.

• Insert the screwdriver into the hole and stall the shaft.
• Take the head of the head and start twist it clockwise. It should be twisted in this direction for the reason that the thread cut on the shaft is left.

Field winding algorithm

Depending on which model of the trimmer for grass is used, the type, thickness and length of the fishing line is selected. The diameter of the cord can be from 1.2 to 4 mm. It is not difficult to guess that the thicker you will refuel the cord, the more rigid and thick grass it is able to cut off.

In most cases, a universal fishing line for a trimmer with a diameter of 2 mm is used.

In order to find out which line diameter can be used on your mower, there are 3 ways.

• View information about the thickness of the cord in the instructions for the apparatus.
• Look at the squash itself. It can be given information about possible fishing line diameters.
• Insert a fishing line for a trimmer into the output. If it passes into it without difficulty, then the cord of such a diameter can be used.

The fishing line for a trimmer is wound on a coil in a mowing head. Therefore, first it needs to be opened (this was mentioned above). There are 2 methods of winding the cord.

The first way

To correctly determine how many meters of the fishing line are required for a specific coil, it is necessary to wind it on the bobbin so that the skein does not exceed the diameter of the sides. If the fishing line for the trimmer will look out beyond the edges of the coil, you cannot insert it into the casing. After you have decided on the length of the material, it must be tucked in a bastard, so do the following.

• It is necessary to fold the fishing line for double so that one end is 10-15 cm longer from the other.
• Please note that the bobbin is divided into 2 parts by the central side, from which charging begins. Find a groove on it and insert a cord into it, bent twice, putting a slight effort.
• It is very important to determine in which direction the fishing line for a trimmer is wound on the reel. If you look closely, you can find an arrow on the bobbin or an inscription with an arrow indicating which direction the winding should be carried out. There are times when there is no arrow on the coil. In such a situation, you can look at the arrow drawn on a mowing head, and wind the cord in the opposite direction.
• Winding should be carried out carefully, a turn to the turn, with maximum thread tension.
• After laying the cord is completed, you will need to fix it first the short end of the fishing line, inserting it into the groove suitable in diameter on the side of the coil.
• The second end, the one that is more authentic, is attached into the groove on the opposite side of the squash.
• After fixing the fishing line, cut its ends, leaving the allowances about 10 cm.
• Next, it is necessary to install a refueling coil in a mowing head. To do this, alternately inserting and pulling the thread into the weekends of the head, place the bobbin in the casing, after which, by applying the required force, pull the fishing line for a trimmer from the fixing grooves and tighten it.
• Now you can put on the lid and fix it with the help of latches.

The second method

Some coils provide a second method of fixing the cord: you can charge 2 sections of the thread, instead of one folded in half. Fishing line replacement occurs according to the following algorithm.

• Before changing or charging a new thread to the coil, determine how many meters it will be required by the way discussed above.
• Bend one end of the cord in the form of a hook.
• Find a hole intended for fixing the fishing line at the bottom of the bobbin, and insert the end of the thread bent by a loop into it.
• Wrapping the cord is required according to the direction of the arrow to the required level not exceeding the diameter of the coil.
• Do the same actions for the second cell of the bobbin.
• The assembly of the head is no different from the method that was given when the refueling of the bobbin was considered folded by half a piece of fishing line.

There is a very simple and quick way to replace the fishing line for motor.cuts without disassembling the mowing head, which you can see this video.

The ends of the cord sticking out of the holes in the casing can be cut to the required length, already when the part is installed in the trimmer. You can do this in two ways:

• By turning on the trimmer for the grass (when rotating, the ends of the fishing line will part on the knife, fixed for these purposes on the protective casing);
• Cutting the extra ends with scissors so that they do not touch the casing body.

The second method is used if I had to put a large diameter cord, and a trimmed knife cannot shorten it.

If the thread was charged into a mowing head, but the length of the protruding ends of the cord is insufficient, then before starting the device they must be lengthened. this applies to the head with manual adjustment. However, there are cases when using a semi-automatic mowing head, when, due to the insufficient length of the protruding ends of the cord, they do not automatically lengthen. In this case, it is necessary to turn off the unit (on the electric device you need to pull the fork out of the outlet), manually press the button located at the bottom of the part, and stretch a little fishing line. After this procedure, the cord will be able to advance again thanks to centrifugal strength, if you put the maximum spindle speed.

No matter how thick the fishing line for the trimmer you should remember: in order not to constantly interrupt the work and do not change the cord, you should avoid areas where a working tool can touch hard surfaces (stones, borders, thick dry branches, etc.D.).

How to remove the coil and replace the fishing line for the trimmer

The owners of the trimmers, mainly beginners, confuse, bordering on panic, when it becomes necessary to change the cutting tool or fishing line for a trimmer in a reel. Very often, when trying to unscrew the mowing head, users simply make it unusable, not suspecting that it is unscrewed in the opposite direction. So that this does not happen, if you need to replace the tool, it is recommended to familiarize yourself with the step.by.step instructions given below.

• Before refueling the fishing line for the trimmer to the coil, drown out the engine of motorcycles or de.energize the ethletric trimmer for the grass to avoid injuries that may occur in case of accidental rotation of the cutting tool.
• Unscrew the nozzle mounted on the gearbox shaft. To do this, the shaft must be fixed by combining holes on the puck and on the axis, and inserting a metal rod or screwdriver into them.
• Unscrew the nozzle. You should know that the thread on the shaft is left. Therefore, to twist the coil of the trimmer for the grass should be right, that is, clockwise.
• Disassemble the mowing head. Most often, the head cover is attached to the fixers. To remove it, you need to drown these latches into the case, pressing the edges of the lid. If your trimmer has a semi.automatic mowing head, which has a button from below, then disassembling the nozzle should be done carefully, since you can lose a spring that sometimes flies away when removing the cover.
• Cut the required amount of fishing line. Usually its length is 5 meters. Use the cord of the diameter that is indicated in the instructions for the tool. It is not recommended to exceed the maximum diameter of the fishing line, since this will lead to increased load on the engine and greater consumption of gasoline.
• Find the middle of the segment of the cord, folding it in half. You will get a loop.
• Special grooves are cut out inside the coil (there may be holes). Insert the loop from the fishing line into this groove.
• Wind a fishing line for a trimmer to a coil, turning it counterclockwise. You need to refuel the cord as evenly as possible, the turns should be laid without ceiling and with good tension. When the winding is finished, leave the free ends of the fishing line about 20 cm long and fix them in the grooves located on the sides of the coil.
• Collect the braid head. Before you finally collect the nozzle, do not forget to insert a spring and washer (if it is available). Install the coil in the case, and prone the ends of the cord through the holes or eye.
• Dress the lid and fix it with latches.
• Screw the nozzle back to the gear shaft, also fixing it with a screwdriver. Tighten the coil of the trimmer for the grass will need to go to the left (against h. Arrows).

Is it possible to make a coil for a trimmer for the grass with your own hands

On sale there are a large number of trimmer heads (not automatic), which have a low price and good quality. But sometimes situations arise, for example, in the country, when the trimmer coil broke, and its repair is impossible, the store is far away, and you need to mow. In this case, you can quickly, literally in a few minutes, make a simple trimmer nozzle to fix the fishing line from ordinary plywood 10-12 mm thick.

• Take a piece of plywood or textolite and draw a circle with a diameter of about 14 cm on it.
• Cut the disk with a jigsaw or hacksaw for metal.
• Drill a hole in the center of the disk, suitable in diameter to the gear shaft. Do not forget before installing a disk on the shaft, put a puck on it.
• You can fasten small corners along the edges of the disk or make 1-2 holes on the opposite sides. They will serve for refueling fishing lines in them.
• To fix the fishing line for a trimmer, you can screw several screws into the plywood.

Such a homemade mowing nozzle is fixed on the shaft with a nut. Twist or unscrew the nut without fixing the shaft will not work. To replace the cord, it will be enough to release the screws, insert a segment of the fishing line of the required length and press it again.

Also, a mowing nozzle for fixing the fishing line on it can be made from a metal sheet. How to do this can be understood from the next video.