How to clean an electric trimmer for grass from grass. Types and arrangement of trimmers

Is it possible to wash a trimmer for grass with water after mowing

Hand braids will help to cope with any vegetation without overstrain, but a careless attitude can quickly disable any tool, including the highest quality. The proper care of the trimmer will extend its service life and save the money of the owner, who will not need to pay for maintenance and repair of the apparatus. Such simple actions are possible even for people with minimal technical knowledge. How to care for this garden tool. in all details in the material further.

Half.cutters are divided into two main groups: gasoline and electric. The first type works on liquid fuel (pure gasoline or its mixture with lubricants), the second. on electricity, from the network or battery.

clean, electric, trimmer, grass, types, trimmers

Hand braids of gasoline group

The principle of action of motorcycles. a fuel is poured into its fuel tank before starting work, which enters the engine in small portions, where it burns out, and the resulting hot gas pushes the pistons in the cylinders. As a result, the motor crankshaft rotates, this movement is transmitted to the spindle of the working head, where there is a coil with a fishing line or a nozzle (a knife with two or several blades).

Externally, the lawn mower looks like this. the engine and cutting part are located at the opposite ends of the long rod and are connected using a hard or flexible shaft. Above the mount for the coil/nozzle is a gearbox, the task of which is to transfer the spindle less revolutions per unit of time than the crankshaft of the motor performs. Buttons and control levers are located on a handle associated with a flexible cable engine.

Features of control-a starter is used to launch in the gas troops, for adjusting the revolutions-a gas trigger that opens or covers the carburetor damper, which is why more or less fuel enters the motor. You can stop the work by pressing the “stop” button, which opens the chain.

On a note! Most often, a trimmer head, on which there are a fishing line for a trimmer, knives or wheels, is attached to the rifle rifle. From the side, from the side of the mower, the cutting element is fenced with a protective casing.

Hand braids of an electric group

Electric trimmers for the grass are arranged similarly, only they do not require a fuel tank, and the control buttons on the handle are much less. The engine can be on top, like a lawn mower, or from below right above the head. In the latter version, there is no gearbox. here the drive and cutting nozzle are directly connected. The rods of electrimmers are solid or collapsible, and in some models, telescopic for convenient and quick adjustment of the length.

When powering from the mains, the mitch is included in the outlet or extension cord (cable leaves from the engine). Battery models work from batteries that are inserted into special nests.

How to care for trimmers

Each type of device has its own features that must be taken into account when working and storing. But some rules are applicable in all cases.

General recommendations

These tips should be followed by users of any travo.shirts. gasoline and electric.

  • Store the device in a dry room.
  • It is better to hang it on the wall, on a special mount.
  • After each use, the device needs to be cleaned from dirt and beveled grass, examined for damage and wipe the surface with a soft rag.
  • Before the work, you need to check whether the bolts fastening parts of the unit are well twisted, especially the fasteners of the working head.
  • It is better to wash herbal juice from the coil immediately after the mowing.
  • It is necessary to monitor the amount of fishing line and the condition of the nozzles of metal or plastic. The fishing line for the trimmer should be suitable for the diameter (for the bastard used and the type of thicket). The blades of the discs and knives must be sharpened, and two.way nozzles should be turned over for uniform grinding of the teeth.

On a note! The grass is often wound on the coil, bar and gearbox. this slows down the rotation of the spindle and creates an excessive load on the engine. Long stems and leaves should be removed from a trimmer for grass immediately after a mowing or during breaks.

The boots of the cord on the bobin should be uniform, without overflows. The fishing line for the trimmer must be wrapped in the right direction and in the recommended number. There are tags on the coil: arrows for indicating the direction and risks to indicate the border.

Large shrubs, trees, fences and other solid obstacles should be pushed around the perimeter, while the trimmer for the grass should be rotated with a casing to the barrier. Otherwise, fishing line consumption will increase, and the blades will dull very quickly.

Features of the care of a gasoline trimmer

Powerful, designed for long.term continuous work, motorcycles require special attention. DIY trimmer maintenance may first seem to be a difficult task, but most buyers quickly get used to following the recommendations listed below and addresses service specialists very rarely. Care requirements are such.

  • Gasoline for the engine should be clean, with an octane number not lower than 92. Fuel density-750-770 kg per cubic meter.
  • Two.stroke engines are filled with a mixture of fuel and high.quality oil in the proportions, which are indicated in the instructions for the operation of a trimmer for grass. Most often, one liter of gasoline accounts for 20, 25 or 40 ml of lubrication. The best oils are produced by the manufacturers of garden equipment. “Stihl”, “Husqvarna” and other brands.
  • When working with a four.stroke engine, fuel and oil are poured into different tanks. Both containers should be filled to the upper mark.
  • Swing gasoline filter must be cleaned about every 10 hours of work: dirt, particles of mowed grass and bark of shrubs gets into it. It is necessary to ensure that it is saturated with oil. If cleaning does not bring results, the filter should be replaced with new.
  • From the spark plugs and muffler of the motor, you need to periodically remove the carpet

Are Battery Lawn Mowers and Grass Trimmers Worth It?

Reducer gears need lubrication, especially after replacing them, when slowing the spindle rotation, as well as when extraneous sounds appear during the work of the trimmer for grass. Lubricants for their products are produced by the manufacturers of motorcycle, but you can use universal, for example, lithol. How and how to process a specific model of a mower, it is better to know from the documentation to the device. Most often, manufacturers advise lubricating the gearbox once a year/season, oil in many models is poured into technological holes on the node.

Attention! Before lubrication, the gearbox should be cleaned of pollution.

Playing the lawn mower

The new trimmer for the grass is rolled up to make sure of its serviceability. The engine of the device must work for fuel and clock, details. be worn to each other, and fasteners. pass the test for the strength. This process is carried out as follows. it is necessary to start the tool and smoothly increase the speed, warming the motor, but at first it must be protected from overheating. Then you should open the throttle of no more than 2/3 of the possible stroke, and let the motor work idol for the first few minutes, and then try out on the soft grass. It is best to mow the lawn.

Attention! After test inclusion, the oil must be drained.

Preparation of a benzotrimmer for the working season

Before starting regular use of the lawn mower, you need:

  • collect the device according to the instructions;
  • prepare a new portion of the fuel mixture. for a two.stroke engine;
  • pour fresh gasoline and oil to the desired level. for a four.stroke motor;
  • change the spark plugs, clean or replace air and gasoline filters;
  • adjust the carburetor (according to the instructions for the device);
  • check the condition of the fasteners and, if necessary, tighten them;
  • Lubricate the gearbox.
  • Check the fishing line for the trimmer and nozzle.

Preparation for wintering

So that the benzotrimer does not lose performance for the period of inaction, you need:

  • inspect the device for the presence of cracks, chips, bent parts;
  • disconnect the casing and cutting head;
  • Drain the fuel from the tank and turn on the device to develop the rest of the gasoline;
  • Wipe/rinse the bar, handle, casing thoroughly;
  • Remove the coil or knife;
  • clean the gearbox and add oil into it;
  • inspect and rinse filters.

Then remove the light of the ignition, pour a little (20 ml) of motor oil into the hole and smooth the engine shaft several times using the starter to distribute the lubricant along the cylinders. After these manipulations, you need to insert the candle back, but do not twist until the end. This procedure (except for the grade of oil) must be carried out once a month, until the device is used.

You bought yourself a new gasoline trimmer for grass and difficulties immediately arose with it. It starts very badly. If you rush a little, and then turn it off, then get it “on a hot” even bigger problem than “for cold”. What to do with it, I won’t know how to start it right?

Instructions for the Motokos plant sounds like this:

Switch fuel with a silicone button (primer) located below the carburetor. Presses must be done as much (or a little more) as it is written in the instructions, usually about 8-10.

Fix the gas lever with a button at high speeds.

Twer the label handle 2-3 times. The engine must “grasp”.

If the engine “grabbed” and stalled, then you need to transfer the air damper to 1/2 and try again. If the motor has started, then drop the gas and transfer the air damper to the “open” position. We start work.

Performing manipulations for pumping fuel, no need to be afraid to shift it. If this happened, and, as they say, “flooded the candle”, then you do not need to unscrew it, it is enough to transfer the air damper to the “open” position and, holding the full gas, simultaneously scroll through the engine with a starter 2-4 times. After that, you can start the engine and start work.

Many problems with motorcycles arise due to improperly prepared fuel mixture. In two.stroke engines, lubrication is produced by special oil (not ordinary motor!) mixed with gasoline. If the oil is not mixed with gasoline, then the lawn mower will quickly fail. Oil/gasoline is mixed in the proportion indicated in the instructions of the trimmer for grass. This is usually 1:40 or 1:50.

The question often arises: 1:50 proportion is how much oil and gasoline?

Instructions for maintenance

In the process of maintenance, attention is paid to several parts of the tool. First of all, an audit of the docking places, mounting units and the general physical condition of the structure are made. Then you can proceed to the inspection of the functional components. Especially in this regard, it is important to assess the condition of the coil with the fishing line. If there are signs of its wear, then a new cutting material is refueling suitable for characteristics.

It has its own specifics in maintenance and a trimmer for grass for mowing grass on the battery, since the battery block can be sensitive to external influences. Manufacturers recommend taking out an element of power with long.term storage and leave it in a dry room in which the temperature regime is in the range from 10 to 30 ° C.

https: // Stroy-podskazka.ru/trimmery/kosit-mokruyu-travu/https: // Bestmarka.RU/Top-15-Luchshih-Benzinovyh-Trimmerov-dlja-travy/https: // fb.ru/article/275932/Trimmeryi-dlya-Pokosa-travyi-Instruktsiya-Otzyivyi

Types and features of trimmers for grass

Half.cutters are divided into two main groups: gasoline and electric. The first type works on liquid fuel (pure gasoline or its mixture with lubricants), the second. on electricity, from the network or battery.

Hand braids of gasoline group

The principle of action of motorcycles. a fuel is poured into its fuel tank before starting work, which enters the engine in small portions, where it burns out, and the resulting hot gas pushes the pistons in the cylinders. As a result, the motor crankshaft rotates, this movement is transmitted to the spindle of the working head, where there is a coil with a fishing line or a nozzle (a knife with two or several blades).

Externally, the lawn mower looks like this. the engine and cutting part are located at the opposite ends of the long rod and are connected using a hard or flexible shaft. Above the mount for the coil/nozzle is a gearbox, the task of which is to transfer the spindle less revolutions per unit of time than the crankshaft of the motor performs. Buttons and control levers are located on a handle associated with a flexible cable engine.

Features of control-a starter is used to launch in the gas troops, for adjusting the revolutions-a gas trigger that opens or covers the carburetor damper, which is why more or less fuel enters the motor. You can stop the work by pressing the “stop” button, which opens the chain.

On a note! Most often, a trimmer head, on which there are a fishing line for a trimmer, knives or wheels, is attached to the rifle rifle. From the side, from the side of the mower, the cutting element is fenced with a protective casing.

Hand braids of an electric group

Electric trimmers for the grass are arranged similarly, only they do not require a fuel tank, and the control buttons on the handle are much less. The engine can be on top, like a lawn mower, or from below right above the head. In the latter version, there is no gearbox. here the drive and cutting nozzle are directly connected. The rods of electrimmers are solid or collapsible, and in some models, telescopic for convenient and quick adjustment of the length.

Several techniques for working with a trimmer

Using a trimmer for grass for haircuts of grass on the territory adjacent to the house, you need to use such a technique of work that best corresponds to the existing features. For example, it can be:

  • Edge. As a rule, this technique is used along the edge of some towering surface. For example, sidewalk or access road. To decorate the edge, the tool is kept as with vertical kosbe. That is, a simple tilt of the head of the trimmer for grass in this case is clearly insufficient.
  • Cutting. If we are talking about the edge of the lawn, for example, then a trimmer for grass is better to turn at an angle. So that the mowing is carried out under a slight slope. If you do in this way, then you can cut less fate and clearly highlight what you really need to dig. The smaller the area to be careful, the greater the angle of inclination of the tool.
  • A braid for grass. That is, a trimmer for grass in this case is used like a traditional spit. Turning the case, the tool is swinging to the right and left. Gradually moving forward. As a result of using such equipment, a very even and neat pruning of grass is provided.

How to work with an electric trimmer for grass correctly

Choosing equipment for a summer cottage, you should not always chase powerful and overall devices. The power of the tool is undoubtedly an important parameter, but it obviously pulls the increased weight of the device, its large size, as well as a high price and increased fuel costs. But that’s not the point.

If you have a small garden in which fruit trees or a small lawn with flower beds and shrubs are tightly planted. then cleanse it of weeds and mow neatly grass. this is an obviously overwhelming task for any lawn mower. In such cases, even a hand tool is an ordinary braid for grass and then it will not help: you simply cannot swing it, bumping into the trunks of trees.

The perfect output in this case is a good and inexpensive electric trimmer for grass. He is so light, convenient and easy to manage that it always becomes a favorite in women and elderly people. Small, quietly buzzing electric motor, handle with comfortable handles and a nylon fishing line for a trimmer, tucked in a spool. these are the main components of an electric trimmer for grass.

Rules for the care and maintenance of a trimmer for grass for grass

Hand braids will help to cope with any vegetation without overstrain, but a careless attitude can quickly disable any tool, including the highest quality. The proper care of the trimmer will extend its service life and save the money of the owner, who will not need to pay for maintenance and repair of the apparatus. Such simple actions are possible even for people with minimal technical knowledge. How to care for this garden tool. in all details in the material further.

Types and features of trimmers for grass

Half.cutters are divided into two main groups: gasoline and electric. The first type works on liquid fuel (pure gasoline or its mixture with lubricants), the second. on electricity, from the network or battery.

Hand braids of gasoline group

The principle of action of motorcycles. a fuel is poured into its fuel tank before starting work, which enters the engine in small portions, where it burns out, and the resulting hot gas pushes the pistons in the cylinders. As a result, the motor crankshaft rotates, this movement is transmitted to the spindle of the working head, where there is a coil with a fishing line or a nozzle (a knife with two or several blades).

Externally, the lawn mower looks like this. the engine and cutting part are located at the opposite ends of the long rod and are connected using a hard or flexible shaft. Above the mount for the coil/nozzle is a gearbox, the task of which is to transfer the spindle less revolutions per unit of time than the crankshaft of the motor performs. Buttons and control levers are located on a handle associated with a flexible cable engine.

Features of control-a starter is used to launch in the gas troops, for adjusting the revolutions-a gas trigger that opens or covers the carburetor damper, which is why more or less fuel enters the motor. You can stop the work by pressing the “stop” button, which opens the chain.

On a note! Most often, a trimmer head, on which there are a fishing line for a trimmer, knives or wheels, is attached to the rifle rifle. From the side, from the side of the mower, the cutting element is fenced with a protective casing.

Hand braids of an electric group

Electric trimmers for the grass are arranged similarly, only they do not require a fuel tank, and the control buttons on the handle are much less. The engine can be on top, like a lawn mower, or from below right above the head. In the latter version, there is no gearbox. here the drive and cutting nozzle are directly connected. The rods of electrimmers are solid or collapsible, and in some models, telescopic for convenient and quick adjustment of the length.

When powering from the mains, the mitch is included in the outlet or extension cord (cable leaves from the engine). Battery models work from batteries that are inserted into special nests.

How to care for trimmers

Each type of device has its own features that must be taken into account when working and storing. But some rules are applicable in all cases.

General recommendations

These tips should be followed by users of any travo.shirts. gasoline and electric.

  • Store the device in a dry room.
  • It is better to hang it on the wall, on a special mount.
  • After each use, the device needs to be cleaned from dirt and beveled grass, examined for damage and wipe the surface with a soft rag.
  • Before the work, you need to check whether the bolts fastening parts of the unit are well twisted, especially the fasteners of the working head.
  • It is better to wash herbal juice from the coil immediately after the mowing.
  • It is necessary to monitor the amount of fishing line and the condition of the nozzles of metal or plastic. The fishing line for the trimmer should be suitable for the diameter (for the bastard used and the type of thicket). The blades of the discs and knives must be sharpened, and two.way nozzles should be turned over for uniform grinding of the teeth.

On a note! The grass is often wound on the coil, bar and gearbox. this slows down the rotation of the spindle and creates an excessive load on the engine. Long stems and leaves should be removed from a trimmer for grass immediately after a mowing or during breaks.

clean, electric, trimmer, grass, types, trimmers

The boots of the cord on the bobin should be uniform, without overflows. The fishing line for the trimmer must be wrapped in the right direction and in the recommended number. There are tags on the coil: arrows for indicating the direction and risks to indicate the border.

Large shrubs, trees, fences and other solid obstacles should be pushed around the perimeter, while the trimmer for the grass should be rotated with a casing to the barrier. Otherwise, fishing line consumption will increase, and the blades will dull very quickly.

Features of the care of a gasoline trimmer

Powerful, designed for long.term continuous work, motorcycles require special attention. DIY trimmer maintenance may initially seem like a difficult task, but most buyers quickly get used to following the recommendations listed below and addresses service specialists very rarely. Care requirements are such.

  • Gasoline for the engine should be clean, with an octane number not lower than 92. Fuel density-750-770 kg per cubic meter.
  • Two.stroke engines are filled with a mixture of fuel and high.quality oil in the proportions, which are indicated in the instructions for the operation of a trimmer for grass. Most often, one liter of gasoline accounts for 20, 25 or 40 ml of lubrication. The best oils are produced by the manufacturers of garden equipment. “Stihl”, “Husqvarna” and other brands.
  • When working with a four.stroke engine, fuel and oil are poured into different tanks. Both containers should be filled to the upper mark.
  • Swing gasoline filter must be cleaned about every 10 hours of work: dirt, particles of mowed grass and bark of shrubs gets into it. It is necessary to ensure that it is saturated with oil. If cleaning does not bring results, the filter should be replaced with new.
  • From the spark plugs and muffler of the motor, you need to periodically remove the carpet

What care does the benzotrimer need

Regular mowing of herbs in their own site is the task of each owner of his home. And the benzotrimer will become a reliable assistant in this matter. You can buy a benzotrimmer today a variety of models and with different features. However, care for this type of agricultural machinery must be mandatory and regular. Because the quality of his work and durability directly depend on this.

Consider what the process of caring for any benzotrimer model consists of. The given algorithm of actions will prevent its breakdowns and expensive repairs.

Why is prophylactic care for a benzotrimer

Thanks to the simplicity of its design, the benzotrimer is simple in operation. As well as in care. After all, modern manufacturers offer customers more and more advanced options. Their device allows regular care for technology and independently. With your own hands, each owner and user will be able to perform a gas station.

The goals of caring for this type of technique should be considered:

  • Maintaining the ignition of a benzotrimer in good condition. After all, the process of working tools largely depends on his work. As well as its functionality and performance;
  • prevention of damage to the chassis;
  • preservation of the integrity of all components of gasoline braid for grass;
  • the possibility of the longest operation of the tool.

Since the benzotrimer will need to be used every summer season, you should immediately choose the right model. And sometimes it’s not easy to make a competent choice! After all, a large number of different models are offered on sale. About how to choose a trimmer for grass for your site, read in the next article of our site.

On the features of the care of a benzotrimer

Since the gasoline braid for grass is usually simple in the device, the care process is not difficult. Using the further recommendations, you can avoid serious breakdowns of the mechanism and the failure of the motorcycle.

Proper filling and fuel composition for benzotrimer

For gasoline models (for example, Krüger benzotrimmer, the Patriot Pt benzotrimer are especially sensitive to the point in question) must be poured out the correctly composed mixture. Gasoline 92 (for more expensive options for the 95th gasoline) and oil for a two-stroke engine-such a mixture must be prepared for filling a trimmer for grass in a tank.

The ratio of oil and fuel is 1:50. Such parts provide better lubrication of internal mechanisms and complete combustion of gasoline in the engine of braids for grass.

Experts consider the preparation of the fuel mixture an important recommendation immediately before starting work. It is not recommended to store a pre.prepared composition. And if he remained in the tank of the benzotrimmer after the end of the mowing, then it is better to drain it into a polymer tightly closed container.

Gearal care

Checking the level of lithola in the gearbox is also an important moment in the balanced work of motorcycles. The moment will save the engine and quality of the mowing.

It will also be necessary to periodically clean the angular gearbox itself.

Correct choice: a fishing line for a trimmer or a disk?

Almost everyone who has the experience of mowing grass using any model of a trimmer for grass understands that the fishing line for a trimmer is used for mowing low and not too hard herbs. And the iron disk is for higher, hard grass and even young shrubs. Compliance with that rule will prevent engine overheating. And also allow you to get high quality mowing.

Sharpening of the disk and knife

Since all cutting tools need regular sharpening, and the knives in the benzotrimer will need to sharpen. Such a simple action will make it possible to get high quality mowing.

For sharpening, a file or rashpil is used. It is necessary to clearly observe the corners of the cutting parts of the knife or disk. This angle depends on the brand of the trimmer for the grass. Bilateral options for knives should be turned over 180 ° when sharpening. And in the process of work it is necessary to try to wear a disk or knife as evenly as possible.

Lack of sharpening of knives or irregularity will lead to the rapid wear of the tool. This is due to the overload of the engine. After all, the knife will not be able to “defeat” complex grass or shrubs, and for their mowing a large engine power will be required. And this largely reduces the Benzotrommer motorcycle resource.

Spool for fishing line: What you should know

Prerequisite: use only fishing line for nobility. The use of metal cables and wires is strictly prohibited. This spoils the mechanism and can ruin the engine.

The diameter of the fishing line should be in strict accordance with the instructions that are prescribed by the manufacturer. Excessively thick fishing line for a trimmer is more effective. However, it overloads the engine largely, increasing the load on it. Especially if such a diameter is not provided by the manufacturer. The process of winding on the bobbin of the fishing line is carried out as tightly as possible, in the direction indicated in the instructions.

Cleaning from garbage and dirt

The mowing head in the process is polluted in the most. It should be regularly cleaned of grass and garbage. Ideally, clean all motorcycles after each time for the mowing. This will retain its appearance and the working part.

To cleanse, you can use a stream from a hose. Sufficient pressure will allow you to bring down most of the contaminants, make it possible when the subsequent use of the benzotrimer does not get dirty during preparatory work. After the washing work of the body, the motorcycles are recommended to dry. Such actions are important to preserve the engine, the full operation of the candles and the carburetor. And also warn the risk of rust on the metal parts of a trimmer for grass.

Why is the care of a benzotrimer is so important

Thanks to regular care, the functionality of motorcycles is maintained at a high level. And also the risk of breakdowns is warned. Repairs of benzotrimmers, as well as their cost, are sometimes high. And in order to prevent the need to buy expensive spare parts or a new trimmer for grass, it is better to allocate time to care for the existing.

How to properly drain the fuel from the lawn mower

It is necessary to prepare a trimmer for the grass for a long simple. In order for the technique to withstand a break without unnecessary difficulties, easily restores work, drain fuel. This is a multi.stage process, performed on the eve of the winter period

In order not to spoil the mechanism, it is important to perform actions step by step

Remove the remnants of grass and dirt from a trimmer for grass

Motokos begin preparation immediately after all the work is completed in the local area or cottage. The tool is cleaned of traces of grass, if drops of water are left, a trimmer for the grass should be dryed out. It is impossible to allow organic pollution to remain on the case. Check the slightest leaks, cracks where the grass could get.

To remove the remains of the grass, you should make movement to another string. from left to right

Remove the remains of gasoline

As a rule, such a technique works on a mixture of gasoline and fuel. After it is removed from the mechanism, it will no longer be able to re.be used to refuel equipment. The reason is not that the fuel is mixed with oil, the main negative factor is a gradual change in the structure of the substance.

Press pumping pump to remove fuel from it

When the engine starts, difficulties may occur. So that the transport does not spend wasted fuel, gasoline pumping is used. When preparing the technique for downtime, it is necessary to follow the instructions according to which, again, the fuel pumping system is used. It is connected when it is necessary to completely remove all gasoline from the mechanism of technology. If you press on the pump, there will be a drain of gasoline residues.

It is not recommended to leave fuel in a trimmer tank for grass

Start the engine for verification

Check if the device works. To do this, turn on the ignition to see what will happen later. If the system has a little fuel (the remnants of the mixture), it is helped to retire. the engine works at idle, it lasts a while until it stalls. The ignition switch must be installed in the Stop position.

Basic rules for storing a trimmer for grass in winter

To find garden equipment in a suitable condition for use next summer, it is necessary to more carefully take the preparation of its storage:

Do not leave equipment in a room with high humidity, metal surfaces are subject to negative effects of moisture, which over time will lead to the development of rust; You can’t keep a trimmer for grass in the sun, even if the unit is left in the room (shed, garage), straight rays penetrating through the window and falling on the body of the device contribute to constant heating, as well as the surface of the surfaces, the appearance of the trimmer for the grass will significantly worsen; It is not recommended to throw the device on the floor or among other things, the cable and soft materials may suffer if mice appear in the basement/garage, in addition, careless storage of the unit can cause damage to things; It is important to avoid the temperature difference, for this the device is protected by a towel or an old blanket; The cutting edge provides additional care,which will support her in working condition until the summer.

Storage place for garden equipment

Proper care of benzocouses. What tips will be?

They bought the new Echo SRM-350ES lawnapers. To extend the service life, I would like to hear tips on how to care for them to properly.

We do not use it so often: per season 2-3 times, on weekends to mow grass on a garden plot. Interested in how to wash it correctly? That part where the knife can be washed abundantly with water, or prevent water from getting inside.

How often you need to rinse air filters? What other tips will be?

Once a season. download a lilest to the lower gearbox (if possible). Follow the cleanliness of the engine. Wash with a rag without pressure, after washing. wipe the gearbox dry, grease. Air filter. wash once a season, impregnate with oil (I don’t remember what, look on the phrase “oil for air filters”). I do not give it like that, I have a pure filter for 5th season. The area is not dusty. Do not go into adjustments with your hands, good gasoline 92 (BP, TNK), special oil for 2 layers (if the braid for the grass is two.stroke), prepare the mixture half a liter no more, work out the half liters. half an hour break. Calculate the proportion, I usually add 12 ml of 2.stroke oil by half a liter of 92. I measure the syringe with a syringe.

After work, be sure to wash. Monitor the cleanliness of the engine, do not pollute the rods of cooling, otherwise you can melt the casing.Follow the cleanliness of the air filter, as if you if you if you if you if you if you with soap. Do not lose spare parts, and generally treat.

Well, yes: wipe it 2 times with a cloth, blow all the dust. Well, then get used to it, you will treat the spit easier and so

Z-ALEXEY wrote: that part of the knife can be washed abundantly with water

I think what is possible, since the manufacturer allows you to mow wet grass after rain. I will say from my own experience that the grass sticks tightly, I wipe it with a rag. There is no sense in soaking a mowing in a bucket

It is one thing to mow moist grass, another drive water under pressure in the gearbox. But in general it is very simple if there is an oil seal on the gearbox from the side of the knife, then the underwater version, if you are driving a closed bearing, just “dirty” execution and wash from the hose and you can’t soak.

In fact, they usually write that the mixture cannot be stored for more than a month, that is, with a weekly mowing, as for me, for example, you can take care of 4 mowing immediately, once a month. Shake and flooded in front of mowing. But what can not be washed the bobbin and casing by Kerher did not know. Maybe you can, if you do not direct the stream towards the gearbox, but simply knock down the sticky grass from the casing?

Air filters on average brands are recommended to clean every 10 hours. I don’t know about the washing of high pressure, and to soak and wash the grass from the gearbox with a brush will never be superfluous, since it heats up during operation and an extra fur coat on it is not good. Yes, liletor in the gearbox is still not worth. Serious manufacturers have high.speed lubrication and most often with molybdenum disulfide. I don’t know how much the lip of the gearbox will reduce the lip. they did not set experiments, but on professional devices the use of lithola is not beneficial to the gearbox to the gearbox. Unfortunately, there are no photographs of the gearbox after the use of not recommended lubrication, but take a word. better than native.

Ed_dream wrote: The mixture is prepared half a liter no more, work out a half liter. half an hour break.

Well, it’s probably very little. It is written that 30 days you can store the mixture. But I decided to follow the rules of 2 liters divorced. spent.

String Trimmer Buying Guide | Consumer Reports

And wash at the expense: naturally do not pressure. Just the grass sticks well. I took a bucket of water, a rag and washed a wet rag. But in the lower part, the water still got with a wet rag. I thought it could make out and let it dry like that. But too lazy to disassemble her. And the oil took naturally special for 2 layers.

By the way, they advised to fill in oils in (gearbox or as the right thing is called, where the knife is). An ordinary machine will go there?

Z-ALEXEY wrote: By the way, they advised to fill the oils in (gearbox or as the right thing is called, where the knife). An ordinary machine will go there?

Not. A thick special lubricant is placed in the gearbox. T.to. The hole in the gearbox is small. the lubricant is stuffed using a special syringe.

Olegych wrote: Yes, lilet in the gearbox is still not worth. Serious manufacturers have high.speed lubrication and most often with molybdenum disulfide. I don’t know how much the lip of the gearbox will reduce the lip. they did not set experiments, but on professional devices the use of lithola is not beneficial to the gearbox to the gearbox. Unfortunately, there are no photographs of the gearbox after the use of not recommended lubrication, but take a word. better than native.

To the gearbox, only special.Lubricant-high-speed.The gearbox will be heated from the lithol.In winter, start a thaw once a month, otherwise the rings can lie down.

Olegych wrote: Yes, lilet in the gearbox is still not worth. Serious manufacturers have high.speed lubrication and most often with molybdenum disulfide.

My Hitachi in the instructions says to use a lithium.based lubricant, I thought it was litol, or this is not so? What is the name of lubricants with disulfide molybdenum, otherwise I’m afraid if I ask in the store they will not understand me.

Aminazin wrote: what is the name of lubricants with disulfide molybdenum, otherwise I’m afraid if I ask in the store they won’t understand me.

Well, you ask in a simple way. Like like this: I need a good lubricant in the spit gearbox, and I need to ask this lubricant for sellers of mowers, and not in the Jamshuts in the construction market.

Solovey, even in specialized stores, sellers are not always Copenhagen. When I bought a braid, it was recommended to interfere with 1:50 mixture, and in the instructions 1:25, although the look was not jamshuta in the look.

Aminazin wrote: use lithium.based lubricant,

Most lubricants are now on a lithium basis. And those recommended for gearboxes too. They are just somewhat different in parameters. And Litol, as the name of its own, universal industrial lubrication (enough, by the way, good), which in physical properties is several wrong. They saw how all the lubricant on the sides when opening the gearbox was opened in the angle. And the gears are dry? Here on industrial lubricants the same effect.

Benzotrimmer care

At the height of summer, when the season of the grass is not finished yet, and your tool no longer looks new. it’s time to provide him with some maintenance. Proper care of a benzotrimer is the condition that will ensure the trouble.free operation of your mechanical assistant.

Greenline specialists, which has been producing garden equipment for more than 15 years, and at the same time, is present on the market, it is recommended to start monitoring the state of a trimmer for the grass since the end of summer. This is necessary because even with the first rains the travic season does not end, only the mower was used contrary to the recommendations, most likely, under more stringent conditions, which is provided for. Typical examples of such incorrect use can be: mowing of lawns flooded with water, cutting shrubs (and not only young), some strive to use a knife to break the earthen lumps on a dug bed. This application can be found all the time, but if the braid for the grass is not made “on the knee”, then this will suffer this, the main thing is not to crush the brick.

After such operation, as a rule, lubrication from the gearbox is washed out, its fastening is spent, as well as the fastening of the protective casing, an air filter will certainly be clogged, especially if you like to leave a mowing with a working motor on the ground. If you want the rest of the season and the next season to pass without problems, it is desirable that several simple manipulations are produced over the benzotrimer.

Firstly, it is necessary to drain the gasoline from the tank, then dry it and blow it, since during the time it is a lot of unnecessary garbage engine accumulates in it. Then, you need to turn out the candle and use the starter to blow the piston.

Further, it is necessary to remove dried grass from the gearbox, it very often twists around the axis, and in combination with soil and water stages, forming a kind of “washcloth”, which collects grass with greater intensity.

Practically, each gearbox has a screw for an audit, it must be turned and soaked in a lubricant. Greenline engineers recommend Azmol 158. This lubricant is well suited for bearings and gear gear. No need to regret lubrication, the superfluous will come out anyway. Tales about a special “super.masis” is a loaf of super.service offering it, we will leave it on their conscience.

Then, it is necessary to remove the air filter. It, as a rule, is foam and it can be washed and dried, or you can simply blow it, depending on the degree of pollution.

If the transmitting shaft is easy accessibility, then in some models, after disconnecting the engine or gearbox, it simply falls out of the bar. It is also advisable to lubricate it with lubricant azmol 158. It has sufficient adhesion, penetrates well under the guide bushings and lingers in the pores of a flexible shaft, as well as on the surface of a hard shaft. You can notice this when you wash your hands if you do not work in gloves.

It is recommended to check the muffler, especially if the neighbor used your mower, since it is not known what quality the mixture was filled, maybe instead of two.stroke oil, he used vegetable oil or olifa. It may seem funny, but this occurs quite often.

clean, electric, trimmer, grass, types, trimmers

In some models, the muffler can be of collapsible. In this case, it can be easily disassembled and washed. But if the muffler is holistic, then there is only one way out of this situation. to remove it, as a rule, it holds on stilettos with nuts. and then try to launch the motor. If the launch is confident and the work is more stable than with a muffler, and the reaction to gas is instantaneous, then most likely the muffler must be washed. Some craftsmen manage to soak it in kerosene, but, as a rule, if the car is strong, then the muffler is better to replace.

And lastly, preparing a benzotrimer for winter storage, it is recommended after conducting the above operations, wrap the motor and gear with a dense fabric, but in no case as cellophane, since condensation accumulates under it, and this leads to the oxidation of contacts and the appearance of corrosion. It is also advisable to store a trimmer for grass in a dry room, not necessarily warm.

When fulfilling all these simple recommendations, your benzotrimmer will work stably at least until the middle of the next season, then again it will be possible to do the same operations.

Several techniques for working with a trimmer

Using a trimmer for grass for haircuts of grass on the territory adjacent to the house, you need to use such a technique of work that best corresponds to the existing features. For example, it can be:

  • Edge. As a rule, this technique is used along the edge of some towering surface. For example, sidewalk or access road. To decorate the edge, the tool is kept as with vertical kosbe. That is, a simple tilt of the head of the trimmer for grass in this case is clearly insufficient.
  • Cutting. If we are talking about the edge of the lawn, for example, then a trimmer for grass is better to turn at an angle. So that the mowing is carried out under a slight slope. If you do in this way, then you can cut less fate and clearly highlight what you really need to dig. The smaller the area to be careful, the greater the angle of inclination of the tool.
  • A braid for grass. That is, a trimmer for grass in this case is used like a traditional spit. Turning the case, the tool is swinging to the right and left. Gradually moving forward. As a result of using such equipment, a very even and neat pruning of grass is provided.

Rules of mowing

In order to cut the lawn with high quality and quickly, you need to observe the equipment and know some features that will save your time and effort. You can work faster, now we will tell you how.

Divide your site into zones. This will help you understand how much you will need to complete. Also, you will have no misconceptions in whether you have already worked here and do you go through the second again. For the first time, the lawn is mowed at a level of 4-5 cm, gradually reducing to 3-4. Install the norms of mowing yourself. You can leave more, smaller. It all depends only on you.

clean, electric, trimmer, grass, types, trimmers

The disadvantage of electric trimmers is that if you mow vegetation during dew, then water can enter the motor of your technique.

If the motor is located below, then the probability of moisture will be even higher. It is also not recommended to work with a trimmer during the rain all due to the same reasons. Entering water can cause a short circuit, which in the future can develop into a malfunction of the unit. Therefore, it is better to wait for the weather more favorable for work.

It is recommended to work clockwise. It is this direction that will leave the grass you mowed by the outside of the entire mowing site. While hold the coil at least 5 centimeters. This is a safe option for a mowing that is good for those who have recently started using such an inventory. If it comes to work at the fence or other places where only a small part is required to mow, then use the edge of the fishing line. This will contribute to the fact that the engine will not overload and wear out.

How to clean the air mowing air filter

A trimmer for grass is an inconspicuous thing on a garden plot. If you want to support the beauty of lawns in the country, a trimmer for grass will help to quickly cut the grass with the least efforts.

As well as no matter what other equipment, it needs saving operation. First of all, you need to create a substitution of the fuel and air filter in time.

It is not necessary to give equipment to the service here. to cope with the task will be able to at least.

Types and principle of the filters for a trimmer for grass

In modern motorcycles, two types of filters are used. fuel and air.

Even the most high.quality fuel has different additives that are rapidly accumulating and disables the technique.

Outside it is completely small. Make it from felt material. A compactly folded felt manufacturer placed in an iron tip and has a fuel tank on a fuel tank clipping tube.

Placement option. in the highway between the carburetor and the tank. Probably the owners of the trimmers note even extremely painstaking cleaning, because the material is rapidly clogged so much that it asks for working substitutions.

Unique consumables can always be bought in specialized stores. Average apiece.

Its main purpose is to detain mud and dust entering a trimmer for grass from the outside at the time.

With mowing, not only dust, and a small sor of the crushed grass, which of course, rapidly clog the equipment, often rises into the air. A good filter will warn the engine breakdown, even if the air is very contaminated.

How to clean an air filter motorcycles ?

How to rinse or clean an air filter on a benzotrimer, benzos, experimental: Izhmash Industrial Line GT 4350.

The place of its location can change depending on the model of the trimmer for the grass, but usually is on the side of the device body under the protective casing.

The casing is fixed differently on the bolt, or with latches, which are not at all difficult to open to pull out the contents. You will like the filter itself made in the appearance of ring or records made of foam, felt, fleece.

If you mow approximately several times within a week, then it will be enough to create a substitution at least once a year. With more saturated use, the check and substitution are made to be carried out more often.

How to clean filter On the trimmer

There is a moment of the need to wash the air filter for the Husqvarna grass for another of any other manufacturer. There are no obstacles, and you can remove pollution from it without the help of others a couple of hours before the mowing.

  • Unscrew the bolt on the protective casing or squeeze the latches.
  • We take out the filter and inspect. To delete what remains to make our client accumulated oil and other pollution, there will be gasoline.
  • We water the gasoline from the canister to the dirty filter and wash off what remains to make our client oil. Squeeze and leave to dry in a minimum for 4 hours.
  • We wipe the installation site with a cloth moistened in gasoline.
  • We install what remains to make our client in the area and close the casing.

Lapal water is used instead of gasoline, but it removes the mud by no less excellent.

For a candidate, flushing can be recommended by blowing, as it is also called just shaking of the tale. These cleaning options are suitable in this case if there are no oil pollution.

Replacement of the fuel filter of a trimmer for grass

Make it completely possible for everyone. You can adhere to the subsequent method.

The 1st that you need to do this to extract Fear tube (Watch the video), because the filter itself is the snut of the fuel tank. For this purpose, we pull your hands for the pipeline only on ourselves. In the process of removing the seal, the fence tube should jump off and stay in the tank. Pinzet will help to pull it out of there. You can also drain gasoline from the tank and remove the fence tube through the hole.

We take a new filter, put on this address a fence tube and a spring ring.

We install the sealing ring back on the pipeline, fasten the fence tube with a new filter to it and season in the tank, coupled with the tube.

Install the sealing ring to the place. Slightly turn around our own axis, so that the connection is fixed.

Garden Trimmer

A light and convenient trimmer for grass for removing grass, and even without a odorous fuel or an annoying electric cord clinging to everything that can be for which. You can mow vegetation even in the most inaccessible places, for example, near the fence, border or around the trees.

Powerful electric motor

Cope with dry grass and large weeds

Telescopic pen

will reach the most uncomfortable places

Protective shield

protect the face and eyes from flying garbage

Trimmer equipment for grass

Power: 6 AA batteries (not included)

Garden Trimmer Effective and economical

Compare a trimmer for grass for Garden Trimmer grass with more expensive and uncomfortable benzotrimers

Garden Trimmer

  • Price: 1590 rub
  • Compact and light
  • Does not require skills in circulation
  • Small
  • Safe
  • Works from cheap batteries aa

Benzotrimmer

  • Price: from 8000r
  • Heavy and inconvenient
  • Requires skills in circulation
  • Very noisy
  • Traumatic
  • Additional expenses for gasoline and oil

“Great thing for pumping grass”

Powerful enough with its slight weight. What is important to me. a motor in a very durable case; You can work on wet grass and are not afraid that the trimmer for the grass will burn. A great thing for pumping grass along the fence on the site and between the trees. Dry grass and dandelions pumps out quickly and efficiently. You can safely work with a fishing line in a vertical plane.

“There were no breakdowns for two seasons of operation”

Powerful trimmer for grass. I have been using it in the village for 2 years, until I failed. The grass is also out of the overgrown, but the trimmer for the grass does perfectly, the grass does not wound on a fishing line for a trimmer. For two seasons of operation there were no breakdowns. A trimmer for grass is perfect where it is necessary to mow grass not only in the country, small areas, but also in the adjacent territories.

“For maintaining in a neat condition of 6-7 acres just right”

This trimmer for the grass is not the first, before that there was another manufacturer, after which the hands were shaking for another hour from vibration. There are no problems with Garden Trimmer with vibration. work comfortably. No backlash is not yet observed. There is a shield for a trimmer and a shield. I use the fishing line for my site, its consumption is small. For a neat state of 6-7 acres just right.