How to convert a single-axle tractor to 4 wheels

Snowmobile and swamp buggy from a power tiller

There is no fundamental difference between these self-made machines, because the snowmobile from a power tiller, as well as the marshmobile on its basis, e fundamental requirement: minimum pressure on the ground. Remaking a single-axle tractor for a new 4-wheeled chassis, special attention should be paid to the quality of making wide snow and swamp buggy wheels.

It is best to make the trailing arms in such a way that they can accommodate the standard wheels of a power tiller.

Owners of heavy power tillers with a trailed cart can make a self-made snowmobile without changing the construction at all. To do this, it is enough to re-shoe your hand tractor into new off-road “boots”. Tires should be deflated before doing this, then jack up the frame, put the wheels into the shoes and inflate them again. After this simple work you can easily travel over wetlands or deep, loose snow.

Practice confirms that such a homemade marshmobile even with a not very powerful 6-horsepower gasoline motor is quite frisky rides on the plain and confidently overcomes small slopes.

Kadvi OKA MB-1D1M10 power tillage

These means of small mechanization are widely used for:

• Conducting all kinds of field work:
  plowing the soil;
  
• planting (sowing) of plants;
• plant tucking;
• haymaking;
• Harvesting, etc. д.
• Cleaning of territories (utility work):
  clearing areas of snow;
• sweeping.
• gardening works.
• Greenhouse works.

To expand the functionality of the OKA MB-1d1m10 power tiller, the following attachments are used:

• Soil cutters (active and goosefoot);
• plough (one- and two-circuit);
• oculator;
• groomers;
• mowers (rotary, segmental, frontal);
• snowplow attachments (dozer blade, brush, auger rotor);
• potato planters;
• potato hoeing;
• trailed cart;
• pump;
• weights;
• harrows;
• tedders;
• hitch;
• branch shredders and wood chippers and t. д.

The classic definition of a motorized vehicle states that it is a vehicle or other form of transportation for riding off-road and on trails with any pavement. All-terrain vehicle on the basis of light and medium agricultural machinery, refers to the category of mini rovers, which have small size and reduced weight.

Before you start making a mini all-terrain vehicle with your own hands you need:

تبدیل تراکتور تک به جفت دیفرانسیل (Renovation and Reconstruction #MF 295 / Convert 2 WD to 4 WD)

• Find a serviceable diesel or gasoline engine, the traction potential of which will allow not only to move, but also to transport the driver;
• Decide on the type of undercarriage. It can be tracked and wheeled. Tracked mini all-terrain vehicle more passable. However, its performance is always an order of magnitude more complicated, and the process of management may not be under the power of a person with primitive technical knowledge.

Wheels from the car “Zhiguli” on a single-axle tractor

Before putting on car wheels, analyze the topography, type of soil on the garden plot, type of work. If clay substrates are prevalent, use studded wheel elements. For uneven and rocky terrain, buy rubber with a large textured tread pattern.

For most models of small tractors for dacha as a substitute perfectly suitable any wheel from the car brand “Zhiguli. Use the recommendations when replacing the factory wheels on your power tiller:

• Prepare replacement blanks;
• on the inner surface of the disk weld a metal plate, which will act as a hub;
• drill holes in it for fasteners;
• Weld the thick-walled tube to the plate;
• Drill holes in the tube for the fixing cotter pin;
• place the fabricated axle with the wheel on the power tiller;
• secure it with a cotter pin;
• Repeat the steps for other similar items.

Use winter tires for comfortable work on any type of ground. To make the unit heavier, weld thick metal elements to the hub plates.

Conversion kit

The above-mentioned differences somewhat complicate the conversion of power tillers into mini-tractors. A special conversion module comes to the rescue. You don’t have to hunt for individual parts. you don’t have to figure out how to make individual tractor parts.

Using the “KIT” kit, you can get three benefits such as:

The peculiarity of “KIT” is the connection of the steering wheel through a worm-type reducer. And also steering rods with standard tips are used for steering.

Includes drum-format braking system powered by hydraulic fluid. Gas pedal is controlled manually and the brake/clutch complex is coordinated by pedals. Developers of the conversion module provided the orientation of the gearbox to the driver’s side, it is placed on the frame.

Hitch-mounted and trailed machines are attached by a detachable device. The kit “KIT” includes a mount that allows you to install the lawnmower and shovel (snow blade). And it also includes the front Gigul wheels.

It is also necessary to mention such parts as:

• frame;
• seat base;

• the seat itself;
• driver’s protection;
• backrest;
• mini-tractor fenders;
• levers to lock and unlock one of the half axles;
• brake cylinder;
• hydraulic tank;
• drum and support disc.

Rear axle and auxiliary attachments as well as front wheels are not included in the “KIT” set. As for tools, they are selected individually.

But in all cases the following are needed:

• hammers;
• electric drills;
• wrenches;
• welding machine and electrodes for it;
• angle grinder;
• fasteners;
• clamps;
• angle grinder;
• drills for machining steel;
• metal discs.

Selection of wheels is at one’s discretion. It is possible to use both automobile wheels and wheels mounted on a similar-sized power tiller.

Of course, additionally purchased hardware can significantly increase this amount. Varying the set of auxiliary components, it is possible to change the total cost.

Iron wheels on a single axle tractor with their own hands

In addition to coupled versions, you can also independently produce and iron gruntozatepy.

In fact, these are metal wheels with welded-on spikes that work the soil layer and provide traction with it. First of all you should determine the diameter and size of the cleats, make a drawing of the future wheels. In addition, you need to determine the weight of the future wheels, given that for traction with the soil, it must be large, and the motocultivator may simply not have enough.

Homemade grousers

The minimum weight of the wheel should not be less than 20kg.

As a basis, you can take the wheels from the car wheels. A half axle is welded to it, and the bearings are put on it. Square-shaped metal plates are attached to the discs by welding. It is necessary that they touch the edges of the rim. Then the plates are bolted to the rim. Then the tines are made. the hooks, which will enter into the soil. They can be made from corners. They are welded on to the rim of the wheel about 15 cm from each other.

What homemade things for the power tiller can be made with our own hands, we will learn in all the details

Such a variety of small tractors, as a single-axle tractor, is a universal means of small-scale mechanization, which facilitates its owner the solution of most issues related to the care of the land plot. A rich set of attachments allows you to significantly expand the functionality of such equipment.

Another advantage obtained by the owners of power tillers is the creation of new machines based on them. Let’s see what can be made of a power tiller and how.

Mini-transport 4×4 from a power tiller with our own hands

Dear visitors to the site samodelkin a friend from the material you learn how to make a mini-tractor with the 4×4 wheel formula. This cross-country vehicle has small dimensions and weight, as well as equipped with an engine from a power tiller with 7 hp, low-pressure wheels are installed from an imported quad bike. The engine torque is transmitted to front and rear axle with the help of motorcycle chains of Izh. The steering tube and the wheel were taken from the VAZ 2108, as well as the CVT. Rectangular profiled pipes welded to the frame of a mini-rover. The machine body is clad with 4 mm plastic with rivets. ATV has two seats for driver-mechanic and navigator)) The author had another 6×6 layout, where the torque is transmitted by chains. But the engine was not strong enough and I had to renounce this idea. A so the mini-car turned out fast, you can go on a fishing trip or a hunt, in the back there is a small trunk where you can put the backpacks, fishing rods, guns. It is also easy to drive on a cross-country vehicle off-road.

Let’s look at how this all-terrain vehicle was assembled?

• Profiled pipe of rectangular cross section
• engine from power tiller 7 hp
• wheels from a quad bike
• VAZ 2108 steering column
• chain from IZh motorcycle
• JOINT GEAR
• 21 tooth sprocket

Step by step instructions for making a mini rover with your own hands.

Front axle Frame Weight of wheel is exactly 7 kg Engine Mounted on all-terrain vehicle frame. The hull is lined with 4 mm plastic. Version with a cabin. Trial version 6×6 Rear bogie Tests. Thank you all very much for listening!

What kind of homemade things can be assembled by remaking a normal single-axle tractor

The variants of interesting handmade articles from a power tiller are different. It all depends on the needs and imagination of its owner. Some homemade tools are used for improving tillage, others for hunting and fishing, and still others just for fun. There are several typical designs that are the most common:

• Practical and handy mini-tractor.
• Snowmobile for winter fishing and hunting enthusiasts.
• A cross-country vehicle that doesn’t fear off-roading.
• Swamp buggy for cranberry picking.
• Motorized sled transport.
• A rough-terrain carriage.
• Similar to an ATV.

You will need a basic knowledge of mechanics to build any of these units.