How to correctly assemble a lawn mower belt

Grass trimmer belt for your hands

The operation of the trimmer is much more comfortable and easier with a special belt. It allows you to mow large areas of grass for hours on end without sore joints and muscles. The two-shoulder belt is designed so that the lawnmower is held in place by its own clamps. without the help of your hands. She will only need to set the direction, and she will do the rest herself. This article is about how to correctly attach a belt to the trimmer and adjust it for you to lighten the load.

Many models of trimmers are equipped with an ordinary oblique belt. But for work, it’s best to buy a backpack strap, which is specially designed for brushcutters. Thanks to its clever design, it distributes the weight of the device evenly on the entire body. Padded shoulder straps help relieve the strain and pain in the forearms. A rigid backrest disperses the load between the upper and lower back, eliminating the lower back. Shock-resistant thigh guard prevents the brushcutter from coming into contact with your leg so it doesn’t rub or vibrate. In addition, the strap provides:

• The grass trimmer can be easily transported;
• Operating comfort due to the ergonomic position of the grasshopper in relation to the body;
• Safe handling. the shoulder strap prevents the brushcutter from slipping out of your hands when hard objects get under the blade.

What a backpack strap is

You need to know that a charged brushcutter weighs on average 6-9kg. And this device needs to be kept suspended at all times. To distribute the load evenly, the harness strap wraps around your body from all sides. The shoulders and back are the main strain, so the upper part is equipped with wide foam inserts and fabric shoulder straps. The straps are then lowered along the body and connected to each other in the chest or abdomen area with a quick-release clip. And a wide, sturdy padding keeps the belt from digging into your body. Attached to the belt is a plastic foot protection. It has a carabiner for attaching to the trimmer and cushioning in the form of a spring. A quick-release latch on top of the brushcutter makes it easy to open and close it.

For your information! Different models of backpack straps may differ from one another by the design of locks, carabiners and the presence or absence of additional pads and latches. But the principle of their construction and operation is the same.

How to Properly Put on a Grass Trimmer Belt

Working with a trimmer is much more comfortable and easier with a special belt. It allows you to mow large areas of grass for hours at a time without soreness or muscle pain. The double shoulder belt is designed to hold the hedge trimmer by itself. without the use of your hands. It only needs to set the direction, and it does the rest by itself. About how to properly attach the belt to the trimmer and adjust it to lighten the load, and will be discussed in this material.

Height adjustment of the hook

The most important thing is to adjust the belt so that the grass trimmer is at the right level from the ground. To do this, raise or lower the height of the hook, which is carried out by pulling the shoulder straps until the holder will not be below the hips at 10-15 cm (palm width). The blade of the attached grass trimmer must be parallel to the surface, that is, in a strictly horizontal position.

Just a side note! If the grass trimmer is attached too high, it will severely limit the grasp of the grass.

Backpack strap for grass trimmer. purpose

Many trimmer models come with a conventional slash belt. However, the best way to get the job done is to buy a backpack strap that is designed specifically for brushcutters. Thanks to its clever design, it distributes the weight of the device evenly over the entire body. Padded shoulder straps help relieve the strain and pain in the forearms. Stiff backrest diffuses the load between the upper and lower back, eliminating the lower back. Shock-resistant thigh guard prevents the brushcutter from coming into contact with your foot, so it doesn’t rub or vibrate. The belt also ensures

• comfortable transportation of the grass trimmer;
• Operating comfort due to the ergonomic position of the grasshopper in relation to the body;
• Safe handling. the belt prevents the brushcutter from slipping out of your hands when hard objects get under the blade.

Backpack mower belt with plastic protection

Belt for this model is used on the lawnmower. Thanks to the backpack design, it distributes the weight very well over the whole body. Plastic protection avoids any discomfort while working with the tool. You can always buy cheap backpack belt for brushcutter at the online store

The belt of this model is used for lawnmowers. Thanks to the backpack design very well distributes the load on the entire body. Plastic protection will avoid discomfort when working with the tool. You can always buy cheap backpack strap for brushcutter at “spetsinstrument” online store.

Shipping costs for delivery of goods paid by the buyer. Delivery is by Nova Post. Payment for goods. cash on delivery or bank transfer. Save money on delivery. you can make an advance payment for goods by bank transfer. The return of the goods is possible within 14 days from the date of purchase if the product is unused, unopened, in good condition, packaging is preserved. For companies and organizations we provide invoices, delivery notes, tax invoices, VAT certificates. Buy a product with VAT in the store Spetsinstrument you can provide registration documents of your company.

Backpack mower belt with plastic protection

38 (050) 336 88 83 38 (067) 326 45 96 38 (073) 169 79 55

Type a new password

Approximate lead time of 3 to 7 days for product availability

Enter your email.Please check your email or phone number and we will notify you when the item arrives:

Adjust the height of the grass trimmer backpack strap hook by tightening the shoulder straps so that the grass trimmer blade lowered to the ground is parallel to the site surface (strictly horizontal). When working with the grass trimmer saw blade, adjust the hook height (by tightening the shoulder straps) so that the grass trimmer saw blade is tilted slightly forward relative to the ground surface.

By moving the grass trimmer’s hanging ear to the grass trimmer strap forward or backward, balance the grass trimmer so that when you release the handlebar, the grass trimmer blade is near the very surface of the area, but not resting on the grass. For sawing shrubs and young trees with the brush cutter blade, the grass trimmer needs to be balanced so that when you release the handlebar, the machine hangs horizontally on the hook of the ground.

Adjust the shoulder straps of the grass trimmer (harness straps) so that the load is distributed evenly over the shoulders (check by pushing the grass trimmer suspension hook by hand).

Husqvarna grass trimmer backpack belt video. About the design features of Husqvarna belt harness that make mowing easier and safer with a brushcutter, trimmer, chain saw, brushcutter. wide shoulder straps and elastic waist belt, quick-release catches (carabiners) in case of fire or any other situation requiring quick release from the grass trimmer. On the versatility of belts for men and women.

These Husqvarna knapsack grass trimmer belts (Balance 35/55, Balance X, Balance XT) can be used on any trimmers, gasoline mowers, brushcutters, power mowers, brush cutters.

A lawn mower is a handy tool for mowing the lawn or tall grass, if properly balanced. It’s not about balancing the cutting line or the blades. You need to balance the working handle as well as the position of the petrol mower on the belt. Many gardeners don’t use a belt when working with a petrol mower, so their arms and back get tired. To work comfortably, it is necessary to use a support belt. Such belts come with professional petrol mowers. You have to buy an extra belt for Chinese petrol lawn mowers.

Position of the lawnmower in relation to the belt

The mower needs to be correctly secured on the belt. So that the lawnmower does not lift up when working and can mow comfortably, the strap is fastened behind the handle. If you fasten the belt too close to the filled up fuel tank the petrol grasshopper will go deeper into the ground and the cutting elements will hit the ground. None of the cutting attachments are designed to be in contact with the ground. Incorrectly positioned, the lawnmower’s cutting elements dull quickly. To extend the life of the cutting elements, gardeners raise the mower. Working like this makes my back get tired quickly.

A petrol-powered lawnmower should hang loosely from the belt. For proper balancing, fasten the belt so that the filled fuel tank and the working organ of the lawnmower are balanced. It is also important to find such a position of the gasoline grass mower, when working in which, you will not cover the exhaust port of the engine, otherwise the engine will overheat during long-term work.

How to properly mow grass with a trimmer?

The main thing is to adjust the grass trimmer belt, so the drum with a fishing line on the ground not to gallop.

Properly make a gasoline-oil mixture.

Do not use a too thick line for the trimmer. it takes up the speed and overloads the grass trimmer.

Do not coil the brushcutter with too much line.

From time to time to stop and clean the basket

Lubricate the grass trimmer cable and the gear (if it has one) with solide.

Trimmer from the company Varyag mow according to the instructions:

Action 1. Setting up the cutting attachment.

Depending on the type of weeds we choose the cutting tool: for soft-stemmed grass. a line for the trimmer, for hard-stemmed and small bushes. a knife. We unscrew the nut fixing the cutting mechanism and install the cutting tool. How to put the collar on how to correctly put the trimmer belt for grass how to correctly play. Tighten the nut. the machine is ready to work.

Note: Some grass trimmers do not have interchangeable cutting tools, so you can start working with them right away.

Action 2. Grass trimmer getting ready for work.

If the grass trimmer is electric. charge the battery or plug in the motor. If petrol, fill the tank with fuel. Then, depending on the type of grass trimmer. adjust it on itself (top-mounted trimmer. hinge on the shoulder, backpack trimmer. by the shoulders, bottom-mounted trimmer. take hold of the handles). Hold the grass trimmer over the grass so that its cutting mechanism is parallel to the area to be cut. Starting the engine.

Grass trimmer mowing is carried out with simple movements. It is important to remember that the cutting mechanism of the device rotates counterclockwise, so that the cut grass will fall on the treated area. First one. from right to left in front of us (this is how we cut the grass tops). Backpack strap for how to properly put the form how to properly put the line on the grass trimmer. The second one is from left to right (that’s how we remove the rest of the grass).

It is better to divide a large workable area into squares, and mow the grass on them, moving from one to another on the outside of each square.

When mowing grass on slopes, it is recommended to mow from below, moving parallel to the sloping area. Came to the edge, went back, went a little higher. and repeat the same route. until a complete mowing of the area.

To mow the grass on an area where there are trees, it is better to use a line cutter, and you need to mow the area along the perimeter, bypassing the tree around the trunk.

After you finish mowing all the grass on the plot, you need to turn off the engine, remove the grass trimmer (for shoulder and knapsack devices), clean the cutting mechanism from the grass residue.

The right grass trimmer belt

There are grass trimmers that do not require any extra attachments. for example, lightweight battery-operated electric trimmers. Even a child could carry them, and they are easy to hold, won’t pull out. But in most cases, grass trimmers weigh 6 to 9 pounds, and a belt is needed so you don’t get tired of carrying them from place to place.

What else is a trimmer belt for??

1) To transport the grass trimmer. Transporting a grass trimmer to the country house when you don’t have a car is difficult. If the equipment does not have a strap, you should at least sew a pouch with a shoulder strap. How to properly put on a grass trimmer belt video. How to put on the grass trimmer belt correctly. What’s the right way to put it on? How to properly. This will ease the burden of transporting the grass trimmer.

2) For comfortable grass mowing. After all, if your hands get tired, you don’t want to mow weeds and overgrown lawns. And if you do want to, trembling with sluggishness is a dangerous option.

3) For an ergonomic positioning of the grass trimmer in relation to your body. A correctly adjusted and correctly fastened belt protects against lumbar injuries and strain on the muscles of the back.

4) For safety. Grass trimmers are much safer if there’s less chance of them slipping out of your hands if you get twigs or tough vegetation in the cutter head. When this happens, the grass trimmer, whether it’s a gasoline or electric mower, makes a sharp jerk, and the grass trimmer is literally “ripped” out of your hands.

It is for these reasons, many models of garden trimmers are equipped with belts. They are threaded through the shaft of the grass trimmer and attached over the operator’s shoulder. The belt helps balance the total weight of the grass trimmer and the operator, and you don’t have to compensate for the balance by extending your arms or pulling one leg back.

How to put on a brushcutter correctly

REDVERG 5014460 shoulder strap for hanging grass trimmer. With hip protection. I bought a Champion grass trimmer belt.

How to put on a belt, how to balance a trimmer or a grass trimmer by example.

1) Find the place where the belt attaches to the shaft of the grass trimmer. How to put on the grass trimmer belt correctly. How to Properly. On many models designed for amateur gardeners, the hook, screw, or slot is located next to the ignition handle or toggle switch.

2) Squeeze the belt carabiner and hook it to the lug on the grass trimmer handle. Find a second strap hole and do the same thing.

3) Place the grass trimmer with the belt on your back so that the upper part of the belt is over your left shoulder (over the right shoulder for left handers).

4) Adjust the strap length so that the lever, which is responsible for cutting power and continuous mowing, is at a comfortable height with your arm slightly bent at the elbow. The width must be at least 10-15 cm from your body to the grass trimmer.

5) Place your right hand on the lever and your left hand on top of the bar. Move the grass trimmer head, feel where the grass trimmer’s center of gravity is. If the weight is still unbalanced and you have to bend over or use excessive force to hold the machine, try pulling the strap up or down 1 to 2 cm. After you have finally sorted out the strap, you will feel which position with the trimmer is the most convenient

6) Stop mowing if you get pain in your lower back and arms. Once again, adjust the belt.

What should be a belt for a grass trimmer?

It’s no secret that grass trimmer belts are often just a sling with two carabiners, not adapted to the convenience and comfort of the operator. Review on lawn mower shoulder strap bought for Champion grass trimmer how to properly put on. Therefore, the belt can be purchased in specialized stores of gardening equipment, purchase online, or simply order it at the nearest studio that works with leather products.

A leather strap is best for grass trimmers: it doesn’t slip and fixes the equipment quite firmly, and the leather is pleasant to the touch.

In the shoulder area, you can make a special quilted overlay, which will make the load on the shoulder less noticeable and reduce friction.

Remember that a properly fitting grass trimmer belt will significantly increase comfort and speed in working with this garden equipment. Which means your health, your mood, and your lawn will be just fine.

How to start and adjust the engine of a gasoline grass trimmer?

Let’s take the Dolmar MS3340 as an example to start the engine of a lawnmower (gasoline trimmer)

To start a cold engine you must:

Turn the ignition switch on the crank

2.Move the air damper in the rear of the air filter housing to the closed position

Pump up the fuel with 5-8 presses on the silicone button at the bottom of the carburetor

Pull the starter cord slightly (about 10 centimeters) until it begins to resist

Then crank the engine for 1-4 times until the engine fires

6.Approximately 10 seconds after starting the engine, move the choke shutter to its original position

Attention! Do not put your knee into the air cleaner housing when starting the engine.

There are two adjustment screws on the carburetor body. Originally in the trimmer they are adjusted by the manufacturer to the optimal position for the engine. The first one (see photo below) adjusts the fuel rate. It is strongly not recommended to touch it by yourself.

The second screw (photo below) is for adjusting the idle speed. You can experiment with it in case of urgent need

PS Photos on how to put the two-shoulder belt for Dolmar and Kawashima lawnmowers

EUROTEC RX27 gasoline grass trimmer

Engine capacity: 51,7 cm3 Power: 2,7 kW Fuel tank capacity: 1 l Fuel type: AI 92/95 Speed of rotation: up to 9000 rpm Boom length: 155 cm Weight: 7,5 kg Professional balancing: yes

Lawnmower backpack belt with plastic protection

The belt of this model is used for the lawnmower. Thanks to its backpack design it distributes the weight very well over the entire body. Plastic protection avoids inconvenience when working with the tool. You can always buy cheap backpack belt for brushcutter in our online store

The belt of this model is used for lawnmower. Thanks to the backpack design distributes the load very well over the entire body. The plastic protection will allow to avoid inconveniences at work with the tool. You can always buy cheap backpack belt for brushcutter at our online store.

Delivery charges are paid by the customer. Delivery is by Nova Post. Payment. cash on delivery or cashless payment. Save money on delivery. you can make prepayment for the goods by bank transfer. You may return the item within 14 days after purchase if the item is unused and unopened, preserving its original packaging and appearance. invoice, delivery note, tax invoice, VAT certificate. You can buy products with VAT in Spetsinstrument store by submitting registration documents of your company.

Backpack mower belt with plastic protection

38 (050) 336 88 83 38 (067) 326 45 96 38 (073) 169 79 55

Enter new password

Approximate terms of appearance of the goods from 3 to 7 days

Enter your email address or telephone number so we can.Your email address or phone number and we’ll let you know when the product becomes available:

Adjust the height of the grass trimmer backpack belt hook by tightening the shoulder straps so that the grass trimmer blade lowered to the ground is parallel to the plot surface (strictly horizontal). When working with the grass trimmer saw blade, adjust the height of the hook (by tightening the shoulder straps) so that the grass trimmer saw blade is tilted slightly forward relative to the ground surface.

By moving the grass trimmer’s suspension eye to the grass trimmer belt forward or backward, balance the grass trimmer so that when you release the handlebar, the grass trimmer blade is near the very surface of the area, but does not rest on the grass. For sawing bushes and young trees with the brushcutter saw blade, the grass trimmer should be balanced so that when you release the handlebar the machine hangs on the hook horizontally to the ground.

Adjust the grass trimmer’s shoulder straps (harness straps) so that the load is distributed evenly over the shoulders (check by pressing the grass trimmer suspension hook with your hand).

Husqvarna Grass Trimmer Belt Video. About the design features of the harness that make mowing with Husqvarna brushcutter, trimmer, chain saw, brush cutter easier and safer. wide shoulder straps and elastic waist belt, quick release latches (carabiners) in case of fire or any other situation that requires quick release from the grass trimmer. On the versatility of belts for men and women.

These Husqvarna grass trimmer belts (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, brushcutters, power tillers, brush cutters and lawn trimmers.

A lawn mower is a handy tool for mowing lawns or tall grass, if properly balanced. It’s not about balancing the cutting line or blades. You need to balance the working handle as well as the position of the gasoline grasshopper on the belt. Many gardeners don’t use a belt when working with a petrol mower, so their arms and back get tired. Comfortable operation requires a support belt. Such straps are included with professional petrol lawnmowers. You need to buy an extra belt for your Chinese petrol mower.

Belt for grass trimmer with my own hands

Working with a trimmer is much more convenient and easier with a special belt. Thanks to it, the operator can mow large areas of grass for hours on end without joint and muscle pain. The design of the two-shoulder belt is designed so that the lawnmower is held by the fasteners by itself. without the help of your hands. You only need to set the direction, and it will do the rest by itself. On how to properly attach the belt to the trimmer and adjust it to lighten the load, and will be discussed in this material.

Adjusting the shoulder straps

In order to distribute the load evenly on your shoulders and back, you need to adjust the shoulder straps well. Just adjust the shoulder straps taut or loose. they must not cut into the body or hang loose. To understand how the weight will be dispersed, you can press with your hands on the hook to hang the grass trimmer.

Engine

Electric trimmers (electric scythes) power is measured in watts (W) and the maximum motor power reaches 1200W. Compared to petrol mowers, they are somewhat weaker, but they have their advantages.

• Weight, t.к. Electric grass trimmers are much lighter.
• Ease of use. you don’t have to worry about buying gasoline and oil or mixing them.
• Electric grass trimmers are much quieter, t.е. The noise emitted by an electric motor is much less than that of a gasoline engine.

And now for the disadvantages

Bottom-mounted lawn mowers have very little power. No more than 650 watts. Also, they are never equipped with a blade (!).

There are considerably more trimmers with the top-mounted engine. They are much more powerful. up to 1200 watts

Most often, electric grass trimmers are equipped with a cutting attachment, but there are models that can be fitted with a cutting disk, or in other words. a cutting knife. As a rule, it is powerful (from 1000 watts) models. Power grass trimmer with the top of the engine allows you to install a thicker line for the trimmer, which allows you to mow thick tall grass. An example is: STURM!, Energomash, Champion

Lockout against overheating

Very rare on electric trimmers. The essence of its work is the following: if the engine overheats, a special thermal switch will not let the engine burn and will shut down the mower. Of course, unlike petrol mowers, an electric mower has to be watched, t.е. after 15-20 minutes of work turn it off and let it cool down for about 15 minutes. The EFCO 8060 and 8100 have an overheat protection feature.

Engine

Electric trimmers (electric scythes) have an output measured in watts, and the maximum motor power is up to 1200 watts. Compared to gasoline mowers, they are somewhat weaker, but they also have their advantages.

• Weight, t.к. Electric grass trimmers are much lighter.
• Easy to use. you don’t have to worry about buying gasoline and oil and how to mix them.
• Electric grass trimmers are much quieter, t.е. The noise emitted by the electric motor is much lower than that of the gasoline engine.

And now about the disadvantages

Grass trimmers with a bottom-mounted motor have very little power. No more than 650 watts. Also it is never completed with a knife (!).

There are considerably more trimmers with the top-mounted motor. They are considerably more powerful. up to 1,200 watts

Most often on electric grass trimmers as a cutting attachment is put a line for the trimmer, but there are models on which you can put a cutting disk, or in another way. a cutting knife. As a rule, these are powerful (from 1000 watts) models. The power of the grass trimmer with the top-mounted engine allows you to install a thicker trimmer line, which allows you to mow thick, tall grass. Example: STURM!, Energomash, Champion

Locking against overheating

Very rare on electric trimmers. The essence of its work is this: if the engine overheats, a special thermal switch will not let the engine burn and will shut down the lawnmower. Of course, unlike gasoline lawn trimmers, an electric lawn trimmer must be supervised.е. after working for 15-20 minutes you need to turn it off and let it cool down for about 15 minutes. The overheat protection is available in EFCO 8060 and 8100 grass trimmers.

Electric grass trimmers: how to make the right choice?

Grass trimmer is the only right solution for mowing grass in places that are hard to reach for a wheel mower, in particular around bushes, trees, along paths, fences and walls.

Grass trimmer electrical schematic diagram.

Grass trimmers come in 2 types: gasoline and electric. In this article, we will try to describe the main points that need to be known when choosing an electric trimmer for the grass.

Grass trimmers with an electric motor are almost silent, start at the touch of a button, and do not pollute the environment. But thicker weed stems and even thicker grass are harder to be cut with a lawn trimmer. In addition, its motor needs power, which is most often supplied through a long power cord, restricting the freedom of action of the cutter and threatening to get under the knife. Trimmers with built-in battery do not need constant communication with the outside world, but they can cut the grass for a maximum of 20-30 minutes in a day. The rest of the time will be spent recharging their low-power, heavy, and very capricious in operation and storage batteries.

Handle type of electric trimmers

Electric grass trimmer handle design.

When choosing a grass trimmer bush trimmer, you should consider that they come with:

The D-handle is convenient if the amount of work is small, but requires a lot of maneuverability (e.g. for the treatment of bushes, trees, paths and hedges). A line trimmer is best suited for this. If you have to tame long-abandoned lush thickets, pay close attention to models with a D-shaped handle, an additional J-shaped handle and the ability to install a knife. J-shaped handle prevents the operator from getting too close to the bevel gear. A J-shaped handle should be attached when the grass trimmer is equipped with a grass knife. To make your work easier, you’ll need a shoulder strap.

The T-handle is great for working outdoors, making your movement similar to using a scythe. These grass trimmers are designed for big jobs in large open spaces. powerful grass trimmers can be equipped with a three-blade blade that can handle branches up to 15 mm in diameter. When working with such a trimmer, it is important that it be equipped with a harness for a tight fit to the body. Remember: the more powerful the grass trimmer is, the more work it can do.