How To Correctly Cut The Outside Corner Of A Skirting Board

How to make the inner and outer corner of the ceiling plinth with your own hands?

In general, in order to make a beautiful inner or outer corner from a plinth with your own hands, you need to be patient and building material. Proceeding from the fact that almost all rooms of any house or apartment have internal corners, the description of the course of work should be started on the example of this type of corners.

How to measure and correctly cut the inner or outer corner of a skirting board

There are, however, several options for measuring and cutting the right angle into which the skirting board should fold. The first option is to use in this process a tool that is actively used by locksmiths. this is a construction miter box. With its help, you can quickly and evenly cut angles at an angle, which are folded into the corner of the junction of two walls.

correctly, corner, skirting, board

When trimming skirting boards, special attention should be paid to the edges of the fillet shelves, which can have different thicknesses.

You just need to correctly insert the plinth into the tool and, using a clerical knife, evenly cut the required angle from the correct end of the plinth. But this, at first glance, very easy way of cutting corners, which would seem to consist only in acquiring a miter box and correctly inserting a plinth into it, has its pitfalls. The fact is that an angle, a plinth cut at an angle of 45 degrees, namely, these are cut using a miter box, will be suitable only in those rooms in which the walls, ceiling and floor are located strictly perpendicular to each other. The miter box will help to make the cut extremely smooth and precise.

Tools needed to prepare and glue the skirting board

As you know, no room can boast of ideal evenness in the ratio of the angles between the walls and the ceiling. Therefore, it is necessary to carry out measurements and sawed off the corners of the plinth with your own hands, using the minimum number of tools. Such as:

  • simple pencil;
  • ruler;
  • stationery knife;
  • glue moment, express.

How to cut a plinth into an inner or outer corner?

If you decide to use a clerical knife to cut the skirting boards, make sure that it is well sharpened.

The most popular tool you can use to cut a plastic skirting board is a utility knife. Make sure that the clerical knife with which you plan to make the saw is very well sharpened. Since the structure of the skirting board, which is characterized by a high level of strength and rigidity, requires the application of great forces at the time of sawing. And the porous structure of the skirting board, when cutting it with a blunt blade or a hacksaw with large teeth, you risk making the cut wrinkled and uneven or even completely breaking the skirting board. In the event that a clerical knife is not at hand, you can use a well-sharpened kitchen knife instead. It will allow you to do a good job. In order to smoothly saw off the corner of a wooden plinth, it is recommended to use an electric jigsaw, which, due to its structure, can change the angle of inclination and in no way spoil the baguette. You will not find a single burr on the mowing line.

Ceiling plinth

Ceiling skirting boards are made from different materials. When choosing, the buyer is guided by his requirements.

The plinth is divided into ceiling and floor. From the name it is clear that the ceiling one is used as fillets, serving to decorate the junction between the wall and the ceiling, and the floor one decorates the place where the wall and the floor meet. Both the one and the other type of skirting board is now very popular among those who are under construction, or who are renovating the interior of rooms. The secret of popularity is simple. this is the most convenient way to get rid of shortcomings in the interior decoration of the premises. over, the skirting board is made of a very lightweight material, polystyrene, which has no way of causing any harm to human health. And, what is most important for people who prefer to do everything with their own hands, the ceiling plinth is easy to mount to the ceiling or the upper parts of the walls. At the same time, a small amount of money is spent on the manufacture of polystyrene skirting boards, which affects its very inexpensive market value. Its cost is charged for one running meter, which is on average 30-40 rubles.

As a rule, there are no problems with joining ceiling plinths. Because the skirting boards that are sold in small elements. one meter, one and a half or two meters, have perfectly flat edges that are tightly pressed against each other, and when using glue, the occurrence of gaps between them is completely excluded.

The scheme of joining the ceiling plinth in the corners.

Slowdown mostly happens when it comes to cutting corners. From the first time and by eye, only a highly qualified specialist with many years of experience can cut the correct outer or inner corner. And the amateur who has undertaken such work for the first time will spend more than one hour and cut more than one m of the baseboard before reaching the desired result. When measuring internal or external, you need to act “by eye” tactics, since the attachment of the plinth to the surface of the ceiling or wall is made at an angle of 38 to 45 degrees. Therefore, cut evenly and glued to the joint, inner corner or outer corner, becomes the result of meticulous measurements, calculations and sawing off. Here is how the popular building principle works nowhere. measure seven times, cut once.

Cutting out the inner and outer corners of the skirting board

All complex construction work eventually comes to an end and smoothly flows into the stage of external and internal decorative finishing of the constructed building. Considering the interior decoration of a house or apartment, attention is primarily drawn to the walls, floor and ceiling. With regards to the walls, it should be noted that the most convenient option would be the traditional pasting with wallpaper, which can also be used when decorating the ceiling, now this is very common. If it seems difficult to pick up the wallpaper or there is a desire to build something grandiose, then experts will be able to help you by plastering the inner surface of the walls and ceiling, which is subsequently brought to an exceptionally smooth and even state and subjected to staining, and, if desired, painting. There is the option of installing suspended ceilings, rack or stretch.

After you have installed the floor or ceiling, the final stage is the installation of the skirting boards, which helps to hide the joints.

In any case, with the correct and responsible approach to business, ceilings and walls will look beautiful and neat. And everything seems to be ready, but something is missing. The resulting picture looks unfinished because the joints between the walls and the ceiling are not finished.

It is very important to put the formed gaps and gaps in order.

Fillets are also called decorative skirting boards, which allow you to close the gaps between the ceiling and the wall.

Cut out the inner corner for the skirting board

First, you should decide in which direction the parts of the skirting board will be glued. The most correct is the beginning of work from one of the corners of the room. Choose for the premiere corner one that is not in plain sight. For example, the one that is near, and not opposite the entrance. This will slightly hide the possible shortcomings of the first corner in your life. And from it it will be possible to diverge in different directions, driving the elements of the ceiling plinth, one after another and so on until the next corner.

Scheme for trimming the inner corner of the ceiling plinth.

Having decided on the place to start work, we will organize a comfortable workplace for ourselves. What is determined by the need to move a high chair to the corner or, even more convenient, a table from which it will be comfortable for you to try on and glue the corner, and behind it a flat plinth. Plus, organize a place on the floor where you can conveniently and easily saw off parts of the baseboard and stick express glue on it.

After the preparatory work, you can proceed to directly designing the selected corner. To do this, we take an element of the plinth, which will play the role of the right side of the corner being created, and apply it to the joint, so that its left end part is tightly pressed against the inner corner. On the mowing line where it joins the ceiling, we draw a line with a simple pencil. After that we put this plinth aside, not forgetting that it will stick to this particular wing of the corner.

After trimming the corners, check the fit and alignment accuracy.

We take the second part. the left-sided one, and try on the end side in the same way, pressing it firmly into the inner corner. And along it we also mark out the line of the connection with the ceiling. On which, after removing this plinth, two perpendicularly located to each other and crossed lines should appear. The point of their intersection is the most important for us. It will need to be marked one by one directly on the parts that fold into a corner. On the right, one of them should be drawn, using a ruler and a simple pencil, a fishing line connecting the resulting mark with the extreme angle of the opposite side of the plinth. According to this line, cut off the corner so that the cut is even, that is, both the front and rear walls of the plinth will be cut off.

On the second part of the inner corner, on the left, you also need to draw a fishing line connecting the intersection point of the lines transferred from the ceiling, along which you will need to cut off the corner, which will slightly differ from that on the right side. The difference is that it must be done by slightly tilting the incision angle. That is, the back side of the skirting board should remain in its original volume. After both pieces are cut off according to your marks, do not rush to use the glue. First, it is best to apply the resulting parts to the corner dry. This will allow, on occasion, to eliminate some defects, if any. They can be easily corrected by aligning the sides of the joint on the plinth elements that are combined in the corner.

Outer corner of the skirting board

The outer and outer corners do not differ in the complexity of the installation. The main thing is to learn how to cut the skirting boards correctly.

READ  At What Angle To Cut Skirting Board

Although rare, outside corners in some rooms are still found. In corridors and walk-through rooms, for example, you can find an outer corner. In order to cut it with your own hands, you must again, in turn, mark out along the outer edges of the plinth applied to the outer corner, two mowing lines, intersecting at the point of joining of the baguettes. The intersection point must be transferred to each of the used baguettes. The corners, again, need to be cut in different ways. The left one should be cut evenly, at about a 45 degree angle. And it ran parallel to the front and back of the baguette. On the right side of the corner to be created, cut off only the back wall of the baguette. Before putting the cut out parts of the corner on glue, it is important to re-attach dry baguettes to the joints of the walls and ceiling in order to eliminate unnecessary worries and problems associated with redoing the entire corner.

The work associated with gluing the ceiling plinth, especially when it is done independently, requires a good concentration of attention, perseverance and dedication. Which will not allow you to abandon the realization of your goal, if you spend a whole hour at one corner, or even more than one. If you are not confident in your abilities, do not spare the money and contact the specialists who will quickly and efficiently cope with the task. After all, it is better to pay extra for the service than later to pay for the alteration.

How to properly cut a corner on a skirting board. Instructions for installing the corner of the ceiling plinth

How to cut the corner of a baguette correctly. Using a laser level

In modern conditions, many home craftsmen already have in their instrumental “arsenal”, which are excellent for checking the straightness of the angle, and for marking the baguette when forming both internal and external corners.

How this is done is described step by step in the following instruction table.

Illustration Brief description of the operation to be performed
First, you need to accurately position the laser level itself.
For this, the same distance, for example, 500 mm, is laid from the corner along the lines of the floor and wall joint. The marked points are connected by a diagonal line.
After that, they find and outline its middle.
The laser level is installed on the floor, turned on, and then placed so that the vertical plane it sets (its projection in the form of a line) passes through the middle marked on the diagonal and coincides with the corner of the room. The beam should pass vertically along the mowing line of the corner. this will at the same time show how evenly the corner of the room is formed.
In fact, a plane is set that cuts the corner of the room exactly in the center. It is in this plane that the joint of the skirting boards should be located.
In this case, the level should be located so that the projection of this plane is also displayed on the ceiling.
You can fix the resulting bisecting line with pencil marks. But even better. do not remove the device, as it will help to more accurately display the desired cutting line and on the plinth attached to the place of future fastening.
It is probably clear that the next step is to install one baguette at the installation site. The plank must be resting with the end side against the wall. The beam from the laser builder, passing along the surface of the plinth, and even along all its embossed protrusions, will accurately show the cut line.
After that, along the mowing line of the beam, with the help of a pencil or a thin marker, the cutting line is outlined.
Using a knife, a corner is cut along the intended mowing line. in this case it is impossible to make a mistake.
Then, in the same way, the mowing line of the cut is marked and the second plinth is cut.
Now that both parts for forming the corner are ready, they need to be connected to each other at the place of future fixing.
If the joint is neat, then you can mount the baguette with glue.
If a small gap has formed between the planks, then the ends of the plinth must be corrected with a knife.
When installing the ceiling plinth, the strips that form the corner are first glued, and the flat trim areas are fixed last.
If, when carrying out the approximate alignment of the corner side of the baguette, its other end will find on the already fixed segment of the plinth, you should immediately mark the required length in order to cut off its excess.
In this case, the straight edge is trimmed just at right angles.
To correctly cut the baguette for the outer corner, it is also necessary to start marking from the floor using a laser level.
There is a slight difference in the primary build here.
At first, mowing lines are simply drawn along the ruler, which are a continuation of the walls. Then an equal distance is laid on them from the corner, these points are connected by a diagonal, on which the center is determined.
The beam is directed through this mark to the protruding angle, also with the projection of this plane on the surface of the ceiling.
Further, segments of the baguette are alternately applied to the wall and the protruding corner so that the beam passes through them.
Marking is carried out along the mowing line of the projection, and then the end part of the plinth is cut.
After that, it is necessary to try on both segments at the installation site, aligning the sections. If necessary, the ends of the strips are adjusted.
If everything is fine, proceed to fixing the fillets on the surface.

How to properly cut a corner on a skirting board. Instructions for installing the corner of the ceiling plinth

In the instructions on how to glue the ceiling plinth and cut the corner, there are four important sections.

  • Connection of skirting boards in the inner corner, which has 90 o.
  • Cutting the ends of the fillet for the outer corner.
  • Docking baguette in acute and obtuse corners.
  • Ceiling plinth fixation technology in the corners.

Outside corner cutting

It is not always possible to find an outside corner in an apartment. However, it is still worth knowing how to make a corner on the ceiling plinth with the help of fixtures in such situations.

The step-by-step work algorithm is the same as for the inner corner. The only, and most important, difference is that for the inner corner the bottom of the fillet is longer than the top, for the outer corner, on the contrary, the top is longer.

Ceiling plinth

A ceiling molding, it is a molding, a fillet, a curb or just a plinth, is most often used to finish the joint between the wall and the ceiling. Although sometimes it is used to cover the inner corners, make decorative frames or panels, decorate niches and architectural elements. There are several of the most popular materials for making ceiling moldings:

Plastic (polyvinyl chloride). Wide and rigid moldings are more convenient to cut with a hacksaw for metal. If you need a more gentle tool, use a jigsaw.

Foam (expanded polystyrene). Very lightweight and porous material that is best cut with a sharp utility or utility knife.

Wooden baguettes. Suitable for cutting are helical saws specially designed for baguettes. You can also use hand or jigsaws.

Floor plinth

A modern skirting board is hardly a gap bridging strip. It is a building block that complements the design and enhances the overall look. Skirting boards are made from several materials:

Wooden can be made from solid wood or veneer. For trimming, use flat or circular saws, jigsaws.

Plastic skirting boards are dangerous competitors to traditional wood. Easy to install and cut with an ordinary hacksaw for metal.

Aluminum skirting boards are the latest in interior design. Cut usually with a saw or hand saw for metal.

Only on wooden skirting boards will you have to make a corner trim. The rest are cut evenly and connected using special corners.

How to join a ceiling plinth. Tools for joining the ceiling fillet

Since it is more difficult to arrange the corner joining of the ceiling cornice, you first need to figure out how to join the corners of the ceiling plinth. To do this, prepare the following set of tools: a hacksaw for metal or a stationery knife, a miter box, a protractor, a ruler and a pencil. For trimming the ceiling plinth in non-standard corners (more or less than 90 degrees), a construction knife and replaceable blades are used.

The secret to successfully cutting a ceiling plinth is that it is recommended to cut the plank also from the front side, and not just along the outer edge. If you make the outer corner, then the inner corner. If you want to get joints no worse than venerable repairmen, then tools such as a miter box or an electric miter saw will be useful to you, which allow you to achieve high cutting accuracy.

You can also trim ceiling skirting boards with more economical tools, such as a hand miter box or a hacksaw. A simple saw is cheap, it is extremely easy to work with it, but the disadvantage of such a device is its roughness. There is always a risk of spoiling the material. For example, if you bought poor quality wood or plastic, the product may begin to delaminate or crumble during operation.

A tool called a jigsaw will help to make a corner without burrs on the ceiling plinth. The advantage of this tool, in addition to high efficiency and precision of work. ease of management. You can set the jigsaw in any direction of movement and make the highest quality cuts.

However, a miter box is often not at hand, and right angles are rarely found in our apartments. In this case, you can try to get by only with improvised means. Make a stencil out of thick paper or cardboard, which will clearly repeat the inner or outer corner of the wall.

If the plinth is hollow inside, then it is unrealistic to keep it upright when cutting with your hands. you need to build a corner from the available materials, into which you put the baguette, like in a miter box. It’s okay if the corner is not perfect. You can even put together two boards. It is important that with their help you can securely hold the molding in one position.

Next, place the corner over the stencil in such a way that the end of the corner is exactly above the corner of the stencil. Place the skirting board in a square and cut it using the stencil guide. Unlike the cutting procedure with a miter box, the blade of a knife or saw can only rest against a corner, so you need to be especially careful and attentive.

To work with foam, it makes no sense to use such a complex technique as a miter box. In this case, you will need an ordinary construction knife. The main thing is to make sure that it has a sharply sharpened blade, then it will be possible to make a high-quality cut without delamination and tears of the material.

How to make the outer corner of a skirting board

How to cut the corner of a skirting board evenly

When we evaluate a new renovation, we involuntarily turn our gaze, first of all, at the ceiling. No matter how mind-blowing the interior would be, its score from the curves of the finishing joints will plummet. In this article, we will tell you the instructions on the ceiling plinth. how to make the joint angle perfectly even.

Having completed the decoration of the walls and ceiling, ugly transitions between them will involuntarily remain. For this, fillets are used at the place of transition of two materials. When installing them, it is important to maintain the evenness and accuracy of the joints.
Related article: how to properly glue the ceiling plinth with glue and putty.

The first way is with a miter box

Professional miter box with a rotary hacksaw For a long time already carpenters have come up with such a special box with slots. a miter box. It is easy to recognize it, among the variety of repair equipment, by its characteristic appearance. This is the most convenient and irreplaceable device in solving the problem that has arisen, how to cut the corners of the ceiling plinth.

READ  How to Cut Corner Metal Sanders Correctly

The miter box usually looks like a tray with vertical holes for a hacksaw. It can be made of wood, metal or plastic. This tool represents the oldest and simplest carpenter’s tool for cutting wood pieces at 90 and 45 degrees. There are types of such a device for professional work, with a rotary mechanism, in which the cutting tool can be rotated and fixed in any position.

How to cut a ceiling plinth correctly
Ceiling corners can be divided into internal and external corners, the method of joining them is slightly different.

If necessary, you can make a miter box with your own hands. To do this, you can use 3 scraps from plywood or boards of the same size. First, for this you need to attach them in the form of an inverted letter “P”, and make a marking of the corners. Then, according to the marking, slots are cut out for a hacksaw almost to the very bottom, and the boards are twisted.

  • We make the right measurements.
  • After that, we install the plinth strip in the miter box so that this position exactly coincides with the placement on the ceiling.
  • The plinth should be firmly pressed against the opposite wall of the miter box. Hold and press with your left hand.
  • We put the hacksaw at an angle of 45 degrees in a special hole and cut off the part.
  • The adjacent part must be cut in the same way, only in a mirror image, as shown in the photo.
  • When cutting soft materials (PVC, Styrofoam), use a metal hacksaw or a regular utility knife. Then your work will be neat and with smooth edges. For an accurate cut, you need to start cutting it from the front.

    • Measure the length of the skirting board from the nearest wall to the outer corner, leave the line on the wrong side with a pencil, indicating the desired length. Keep in mind that the edge (its upper part) should extend slightly outward.
    • Move the skirting board to the miter box and cut it.
    • The adjacent bar also needs to be measured with a margin, and cut in a mirror image to the first part.

    How To Do An External Mitre On Skirting Boards | Skirting World Tutorials

    Trying on the ceiling plinth. the joining of the parts should be perfectly flat. If the result is not achieved, and there are protrusions at the joints, you can trim the edges with an ordinary knife until a perfect fit.

    Checking the smooth docking
    In the video in this article, all the nuances are well described:

    Method two. no additional tools

    For the inner corner, you can use the simplest way of perfect joining. by marking on the ceiling. Another example of how to cut a corner nice and even.

  • Attach the fillet to the ceiling, firmly pressing its flat edge into a corner.
  • Draw a line along the long side of the plinth on the ceiling.
  • Do the same with the adjacent part on the other side.

    Mark the point of intersection of the lines.

    The end result is an even 45 degree angle when you draw the line from the point of intersection to the edge of the part. This method of how to cut a skirting board is available to everyone, without the presence of special tools.

    With a good eye and accuracy of hand action, you can use a homemade template that resembles an imitation of a miter box. To do this, take a thin board or thick plywood, and draw the layout in the form of a horizontal rectangle. Use a protractor to mark 45 degrees on the right and left sides of the rectangle. Draw mowing lines connecting opposite edges.

    Outside Corner With Baseboard-EASY Tutorial

    Now you can solve the problem of how to cut the ceiling plinth using this layout. The actions are simple and similar to the description above in the first option. Only the ceiling parts should not be inserted, but superimposed on the drawing and combined with the hacksaw with the layout of the layout.

    Description of methods for gluing ceiling skirting boards (cornices) to the ceiling. Method of gluing with glue, putty and sealant. How to make even corners on the ceiling.

    How to cut ceiling plinth in corners

    The quality of the ceiling finish greatly affects the appearance of the room. Therefore, they try to do everything perfectly, or very close to it. The finishing touch to the design is the ceiling plinth. They give the finish a complete and holistic look. The strips themselves are mounted on flat surfaces simply: on special white glue, but problems arise with the design of the corners. Without knowing how to make the corner of the skirting board correctly, a lot of material deteriorates. How and what to cut it in the corners and tell you.

    What is it made of and what is it called

    The very first skirting boards on the ceiling were made of plaster. They were cast in special molds and then installed on the ceiling with mortar. Such figured ornaments were called fillets. Today you can rarely see them: they are expensive, and outwardly they are almost indistinguishable from the cheaper options. And the name is almost lost.

    The most popular ceiling skirting boards are made of polyurethane or polystyrene. They are inexpensive, look great, easy to install, have a wide range of profiles and patterns. The width can be from 5 mm to 250 mm. They are used in almost any room, decorated in any style. An exception is wooden houses with a corresponding interior. Wooden products are most often used here. the style dictates its conditions.

    There is also a similar plastic finish. It is mainly installed in bathrooms. But even in damp rooms, you can safely mount polyurethane strips. they are not afraid of damp.

    You need to cut the ceiling plinth in the corners of any material in one of the ways described below. The only exception is plastic skirting boards: you can arrange such a corner only using ready-made corners.

    What and how to cut

    Working with skirting boards made from different materials means using different cutting tools. When working with a wooden ceiling plinth, it is more convenient to work with a saw on wood. All others, including plastic ones, made of foam and other polymers, are better cut with a blade for metal. The result is a smoother cut, less burr. Saws are usually used when working with a miter box.

    Corner design looks attractive

    When working with polystyrene skirting boards, they cut them with a good office knife without special devices. Its blade is quite thin and even, the cut is smooth, not wrinkled. If you use a saw with polyurethane or polystyrene, do not press hard: you can wrinkle.

    In general, in order to get used to the tool and material a little, take a piece and practice on it: cut, saw, trim. So there will be fewer problems when working.

    How to get the correct angle

    Most of the problems when working with skirting boards arise in the design of corners. Since the surface of the products is complex, it will not be possible to simply cut off at the desired angle: it is also necessary to cut it so that they dock and, preferably, without large gaps. In reality, there are several ways to make the corner of a ceiling plinth perfect (or almost).

    Using a miter box

    If the corners and walls in the room are even, you can use a special carpentry tool. a miter box. This is an inverted U-shaped chute in which the mowing line is marked for cutting at 90 ° and 45 °. The part in which you need to make a gash is laid inside, a saw is inserted into the guides. The part is held in place, cut at the desired angle.

    This is what the miter box looks like. Can be plastic, wood or metal

    In the case of skirting boards, not everything is so simple: they must simultaneously adhere to two surfaces, therefore they must be pressed against one or the other wall of the miter box. When working with ceilings, they are pressed in the side closest to you.

    The sequence of actions when finishing the outer corner, you need to make a gash at an angle of 45 degrees. Place the miter box in front of you. Trying on how the plinth will be located, determining which part of it will be attached to the ceiling. In order not to get confused and cut off the ceiling plinth correctly, put the strip that will be located on the right on the right, the one on the left on the left.

    How to cut a corner on a ceiling plinth: install it correctly in a miter box

    Press the part that is on the ceiling to the bottom of the miter box. The other side is closer to you and raised. Lean it on the wall of the device so that it does not stagger when cutting. That is, the front of the skirting board turns out to be turned away from you. Do the cutting direction as shown in the photo below. By folding the two cut pieces together, you get a protruding outer or outer corner.

    How to make the outer corner of a skirting board using a chair

    First put the cut-off parts in place “dry”, without applying glue. If the geometry of the corner is not so perfect, you can tweak it a little with a knife. It is easier to cover small errors with a special putty.

    The situation is very similar with the inner corner of the skirting board. First you try on which side will be on the ceiling, press this part to the bottom of the miter box, lean the second part on the wall closest to you and make cuts as shown in the photo below.

    How to make an inner corner of a ceiling plinth using a miter box

    And again, first try on without applying glue, if necessary, slightly adjust. Then apply a thin bead of glue to both surfaces that will adhere to the wall or ceiling.

    Your own version of how to use the miter box correctly is shown in the video.

    How to make a corner of a skirting board without a miter box

    Few people in apartments or houses have angles exactly 90 °. Small deviations are easily corrected after fitting. But not always. Then you have to mark everything “in place”. under the ceiling.

    You will need a finely contoured pencil (hard. it is not so visible on the ceiling, but leaves quite clear marks near), a small piece of plinth, a ruler and a good stationery knife if you work with polyurethane (polystyrene) baguettes or a metal saw for working with other materials.

    Apply the plinth to the corner, draw along the outer edge with a pencil. Apply to the other side of the corner, also mark. You have a cross on the ceiling, the center of which marks the place where the plinths of the ceiling plinth should converge (look at the photo). Having installed a piece of plinth in the corner, which will be glued there and resting it with its end on the wall, transfer the mark to it.

    How to make corners on skirting boards without using special tools

    Now take a ruler and connect the edge of the skirting board with the marked mark. If you just put the plinth on the table and cut along the mowing line, the two parts in the corner will still not fold: the inner part will interfere. It can be trimmed later by trying on the ceiling. The second way is to place the piece to be cut on the table with the piece that will be on the ceiling. And cut along the mowing line, but holding the knife at an angle of about 45 °. It will still be necessary to correct, but much less (and less chance of error).

    Repeat the same operation with the second bar. Put it to the desired wall, rest the butt against the adjacent wall, mark the place where the cross is drawn, draw the line and then cut it off. Correction Carried out “dry” without applying glue.

    You repeat exactly the same steps for the outer (protruding) corner. Now you know another way to make a corner of a ceiling plinth, and without a scissor or other special devices.

    READ  How To Sharpen A Saw Chain Correctly

    With decorative corners

    There is one more, the easiest way. For skirting boards made of polyurethane or polystyrene, use ready-made, factory decorative corners. They are installed in a corner, strips are glued to them closely. Cutting them if necessary is very simple: a few millimeters with an ordinary clerical knife.

    Examples of finished fillet corners

    How to dock in corners

    If the installation of the first corner is completed, we can assume that you have already learned almost everything. “Almost”, because you still need to learn how to join the corners and cut the planks to length. When some part is already glued and there is a small distance to the corner, how not to be mistaken with the length? The answer is simple: leave stock.

    At first, you can cut a piece 10-15 cm longer: it will be possible to redo it several times if something does not work out right away. Then you make a corner in the way described above, try it on dry, adjust everything so that the result suits you. Only then can you attach the already cut strip to the corner and mark the place to which it can be shortened. You need to trim at exactly 90 °. It is not necessary to use a miter box. Just try to put the knife (hacksaw) perpendicular to the surface.

    Ceiling plinth. how to make a corner?

    Ceiling repairs most often end with the installation of decorative ceiling plinths, called fillets by professionals. These interior details are used not only for decorative purposes, but also have a purely practical function: with the help of skirting boards, you can hide uneven joints between the ceiling and the wall. In addition, the appearance of a room without fillets will seem unfinished.

    Any room has internal corners, and also, if the ceiling is of a complex shape, there are also external corners. Therefore, many owners who make repairs on their own have a question: how to make a corner of the ceiling plinth. Let’s find out how to correctly make the inner and outer corners of the ceiling plinth.

    To trim the corners of the ceiling molding, we need the following materials:

    • Miter saw;
    • sharp knife;
    • miter box;
    • ruler, square, pencil.

    How to make the outer corner of a skirting board?

    In an ordinary room without any protrusions, there are four interior corners. Consider how to properly cut the ceiling baguettes for gluing them in such corners.

    Before you start gluing fillets, you need to make a markup: measure the perimeter of the ceiling, determine the joints of the baseboards. In addition, it is necessary to measure the angle between the ceiling and the wall: with flat surfaces, it should be 90 °. In this case, adjacent skirting boards will have to be cut at an angle of 45 °.

  • Typically, you can use a sharp utility knife to corner the PVC skirting board. Baguettes made from denser materials can be cut with a saw or a hacksaw, but it is best to use a special carpentry tool. a miter box, which is a groove with slots. The skirting board is inserted into the miter box and cut at an angle of 45 °. The opposite skirting board is cut in the same way.
  • After that, the cut parts of the baguettes should be tried on by attaching them to the inner corner. We check the evenness of the cut and the tightness of their connection. In the event that the angle between the ceiling and the wall is uneven, markings should be made in place, and then, using a sharp knife, adjust parts of the baseboards. Now you can glue the skirting boards to the ceiling.
  • How to make an inner corner of a ceiling plinth?

  • As practice shows, in order to make an even outer corner of the ceiling plinth, you can also use a miter box. This very handy tool will help you cut baguettes exactly at the desired angle. First, the skirting board must be applied to the corner and the markings made. Then the strip is inserted into the miter box with the side that will be glued to the wall, and the opposite edge should be at the bottom of the tool. Cut off the fillet at an angle of 45 °. In this case, the plinth should be kept as even as possible, otherwise the cut will be uneven and an ugly gap will form in the visible outer corner, which will be quite difficult to seal. In the same way, we cut off the second bar.
  • Now you need to bring both parts together and check the evenness of their cut. With proper cutting, there is no gap between the skirting boards, and their edges are tightly adjacent to each other. If the angle between the ceiling and the wall is uneven, then the first plinth is cut off in the miter box, and the second is adjusted manually until their cuts coincide.
  • The joints on the outer corners of the ceiling skirting boards can be decorated with special plastic corners.
  • This is what the skirting board will look like when glued to the inner and outer corners.

    Before you start trimming the skirting boards, it’s best to practice on small pieces of baguette. When trimming, you can leave 1-2 mm in reserve, and when fitting, these extra millimeters will be sanded.

    How to cut the corner of a ceiling plinth evenly When we evaluate a new renovation, we involuntarily turn our gaze.

    How to cut ceiling plinths in corners The quality of the ceiling finish greatly affects the appearance of the room.

    How to cut the corner of a ceiling plinth evenly When we evaluate a new renovation, we involuntarily turn our gaze.

    Tools for work

    In the process of performing work, you may need the following tools:

    • hacksaw for metal;
    • stationery and construction knife;
    • goniometer;
    • miter box;
    • pencil;
    • ruler.

    The miter box is the main tool that you need to join the plinth in the corners

    Ceiling plinth how to cut corners. Miter box cutting: outside corner

    Most often, when installing ceiling plinths, home craftsmen are interested in how to correctly arrange the interior corners in the room. Cutting outside corners is done less often, but with a certain layout of the walls, it is necessary. Consider how to correctly make an internal fillet using a special tool (miter box).

    First you need to purchase a miter box. This tool is a tray in which the part is fixed and trimmed. In order to measure the length of the required product, you need to attach it to the ceiling. Next, you need to install the plinth in the miter box. Its location should correspond to the position it will occupy on the ceiling.

    Important! During cutting, you must hold the fillet with your left hand. It should fit snugly against the instrument wall. The part of the product that will be fixed to the ceiling should be on top. The other part is firmly pressed against the bottom of the working tool.

    How to properly cut the inner corner of the ceiling plinth is a difficult question, which can be answered by the corresponding photos. Experts recommend studying them, and only after that start work.

    After you have made sure that the product is positioned correctly in the tool, you can start cutting itself. The hacksaw must have a certain angle, namely 45 degrees. During work, it is not recommended to apply strong pressure on the cutting tool, as the surface of the miter box can be damaged. Then the adjacent fillet is trimmed, which is done in a “mirror” way.

    Why dock the skirting board

    When installing ceiling fillets, the question arises of particular difficulties: how to properly fit the ceiling plinth. The joining process involves the connection of strips at the corners of the room and when they are built up along the perimeter of the walls.

    Standard ceiling fillets are made in the form of separate strips, which have different parameters of length and width. The width is chosen based on the size of the room, and the length of the products ranges from one to several meters.

    Most often, fillets are installed using standard strips. For this reason, their docking will be essential. over, it is relevant for any type of material from which the baseboard is made, whether it is gypsum, wood or foam.

    Corner docking

    You need to dock the inner corners of the ceiling plinth as follows.

    • Place the bar in the miter box, pressing its edges a little further than the slot (the right mark should be at 45 degrees).
    • Cut the strip carefully at the pre-marked location.

    The side of the skirting board, pressing against the bottom of the miter box, is attached to the ceiling, and the one that was located on the side, to the wall surface.

    It is recommended to cut the right and left corners at the same time. After that, the cut strips must be attached to the ceiling in order to check the accuracy of their coincidence. If, nevertheless, there are some errors, they are corrected with a construction knife.

    The process of trimming planks with a miter box

    You need to dock the ceiling plinth in the outer corners a little differently.

    • Prepare fillets for gluing by cutting the inner corner.
    • Make marks that show the location of the corner start.
    • Place the product in the miter box with the longest part on the left side.
    • Cut 45 degrees to the left mark.
    • Check that the bottom of the product fits perfectly to the outer corner when gluing.

    How to join a ceiling plinth. Instructions on how to join the ceiling plinth in corners and in straight sections

    Skirting boards are often used in modern interiors. In order for them to become a full-fledged decorative element in the room, you need to responsibly approach the installation of this part. We offer you to figure out how to dock the ceiling plinth yourself.

    Perfectly joined fillets are an important part of the interior design

    Outside corner

    It is most correct to observe the dimensions more precisely, first start to mark the inner corner, and only after that move on to the outer.

    Otherwise, it may happen that the entire length of the bar is not enough.

    The plank is applied to the ceiling, basting is made to size. Holding on with the left hand, the ceiling plinth is pressed against the nearest wall, the hacksaw handle is brought closer to the hand. The workpiece is cut.

    The strike plate is pressed against the nearest wall, while holding it with the right hand. The blade of the hacksaw should be at an angle of 45 °, the handle of the tool comes close to the hand of the master. A piece of the workpiece is cut off, the corner will neatly fit.

    Such processing with the edge of parts with wort is good in cases where the angle between the walls is even and straight (90 °).

    If its performance leaves much to be desired, then it is worth using a different method.

    • Ceiling plinth how to cut corners. Miter box cutting: outside corner
    • How to cut the outside corner of a skirting board with a miter box. Pruning with a miter box
    • How to join a ceiling plinth. Instructions on how to join the ceiling plinth in corners and in straight sections
    • Why dock the skirting board
    • Tools for work
    • How to join a ceiling plinth
    • Training
    • Corner docking
    • Docking on straight sections
    • Video how to make a corner on a ceiling plinth

    How to join a ceiling plinth