How to cut a ball brick in half.

How to cut chamotum brick?

Previously, the question of cutting bricks did not arise, because it was simply cut with the help of a pick. But now there are a lot of construction tools that allows cutting blocks quickly and accurately.

During the cut of this building material, a lot of dust is formed, so you need to always use personal protective equipment: a respirator, fabric gloves, plastic glasses. According to safety regulations, all electrical equipment must have grounding.

To get an accurate and even cut, you need to apply the necessary marking to the processed object. The necessary dimensional lines are applied to the plane of brick with a pencil with a pencil with a ruler and a square.

Cutting with a gas tank

A special circular saw of an independent type equipped with a gasoline engine is called a gas tank. This tool has a large mass and size, so for piece cutting of ceramic brick, it is not very convenient. Cutting tool used in a gas tank can be two types: wheels or chains. Both types of equipment are made with diamond spraying.

The saw, equipped with a disk, resembles a corner grinder (only larger). When installing the circuit, the tool is similar to a chainsaw. Due to its power, such a saw is more suitable for cutting openings and niches in brickwork, as well as in dismantling. Benzorezoresis is able to cope with the walls of almost any thickness. A big plus is the equipment of this equipment for a forced water supply system to the cutting area, which eliminates dust.

Cutting brick corner grinder

When performing a small volume of cutting brick, a corner grinder is a good solution. It is recommended to use angular grinding machines with a capacity of 2 kW. But you should not take too powerful, because they are extremely bulky and heavy.

The most convenient for this are models in which it is possible to use circles with a diameter of 23 cm. The cutting equipment of smaller diameter is also suitable, but using it is not too convenient, t. to. The disk does not pass for the entire thickness of the block. The workpiece will need to be turned over, while the accuracy and quality of processing will suffer, the performance will significantly decrease.

Technically, the method of cutting bricks with a corner grinder does not represent much difficulties. But it is important to hold the tool correctly. It must have a reliable fixation, in which the cutting edge is strictly perpendicular to the processed surface. In an inexperienced person, it is unlikely that you can immediately make an even cut, so you should first practice. It is necessary to take into account the width of the cutting edge and the backlash of the tool.

Experts advise to use a special clamping bed for angular grinder to improve the quality of cutting. In this device, the workpiece is fixed in an individual recess, and the angular grinder is rigidly fixed on the lever. The fixed fastening of the brick block allows you to easily cut it along, across and at any angle. details on

Diamond cutting brick

In order to obtain a flat cut surface without cracks and chips, diamond cutting brick is used. Such work is carried out by corner grinding, but using a special diamond cutting tool. Any work in which such equipment appears are considered a diamond sharp. The difference between these cutting elements is that they have diamond spraying on the working part.

For cutting brick blocks, it is better to use diamond discs, t. to. They ensure the safety of work and have a long service life. Use diamond cutting with a more powerful professional tool is economically impractical.

Manual tile cutter

When there is a need to cut thin pieces of facing brick, you can use a hand tile. It will be convenient when carrying out finishing work, when pieces of brick with non.standard dimensions and angles may be needed.

The use of tile cutters

With forceps you can give a brick an arbitrary figure shape: perform a bevel, rounding, etc. The tool is suitable for thin and painstaking work.

Cutting brick using a special machine

A specialized machine for cutting bricks is effective in case of large.scale work. It allows you to carry out all manipulations as quickly and efficiently as possible. Due to the presence of an irrigation system during processing on such a special machine, a minimum amount of brick dust is thrown into the surrounding air. But this equipment has a fairly high price, so its use for single work is unprofitable.

Some craftsmen make machines with their own hands. To do this, build a structure from a bed (support) and cutting equipment (circular saw, corner grinder). The equipment should be securely fixed and before starting work to control the serviceability.

Features of brick cutting

The working surface of the tool should be very thin and acute

Features of working with blocks at home:

• Fragility and brittle material. The chipper and the peorator for cutting are not suitable.
• The working surface of the tool should be acute and thin to avoid the appearance of chips.
• Before starting work, the subject should be fixed with improvised means.
• To prevent dust from scattering, the element must be wetted with water.
• During operation, it is necessary to use personal protective equipment to avoid dust and brick fragments into the respiratory system and vision.
• The power tool must be reliably grounded.
• For the accuracy of the cut, marking is applied to the surface (using a piece of chalk and a square).

At home, you can always find than to cut a brick. There are two types of cutting tools and sawing: manual and electric.

• corner grinder (angular grinding machine);
• a special machine for cutting building blocks;
• electric hacksaw (jigsaw);
• laser tool (for cutting openings in a brick wall).

If there is no electricity at the facility, you can use a gas tank to solve production problems.

Varieties of brick

Brick has been used in construction since ancient times. It is distinguished by enviable strength and durability. There are a fairly large number of types of bricks depending on the material from which it is made, as well as on what it is planned to be built (walls, furnaces, etc.).

Red brick

Classic brick, made of special varieties of clay and burned in a stove at high temperature, is called red for its color. It is widely used in various areas of construction and in the construction of individual residential buildings. The material can be cut at home with several tools that allow this to do this with the production of products that differ in a high level of accuracy. The cutting tool is more often a diamond circle. The appearance of the final structure largely depends on what to cut.

Hand.shaped facing brick

A distinctive feature of the brick manually is its unusual and attractive appearance. Used for facing work. However, it is quite expensive, therefore, in order to save money, the cutting of a hand.shaped brick is practiced in half along the length of the block. So it will take 2 times less material. Cutting is carried out with a diamond tool.

Facing hollow brick

Hollow brick has inner voids, which can be up to half of its mass. On sale there are products of all kinds of shapes (with ready.made roundings, beards, etc.), so you need to cut it not so often. If necessary, you can cut the material with any diamond device (corner grinder, saw, etc.).

Full-bodied brick of cross-format

The brick cross-format has an unusual shape: it is elongated (more than 29 cm) and narrow (about 4 cm). It is used exclusively for cladding. Cutting is carried out with the same tool.

Clinker brick

In the manufacture of clinker bricks, special refractory clay is used, so it is much stronger and stronger. Thanks to these qualities, as well as a variety of textures and colors, it is used for paving paths and yards, facing facades and basements of buildings. It is necessary to cut such material on special machines using water cooling.

Silicate brick

Silicate brick is made from a mixture of lime and sand (quartz rocks). The material is quite suppressed and therefore easily cut the corner grinding with a diamond circle. In the absence of this tool with work, you can cope with a simple hacksaw for metal.

Shamotny brick

Stone, or chamotnaya, brick is a heat.resistant building material that is used for laying fireplaces and furnaces. Cutting blocks are carried out on a special machine using a segment diamond circle.

Cutting the opening in a brick wall

Diamond cutting is considered a leading technology for organizing openings in a brick structure. The choice of equipment is determined by the complexity and scale of the work performed. The following devices equipped with diamond tools are used:

• angle grinder;
• benzores;
• Schwonarezchik;
• diamond rope;
• laser equipment;
• Asterase car.

Hand tool

Most often, manual tools are used when conducting minor masonry work or repairs. The main devices are a building chisel or a chirus, a regular hammer (not a kiyanka). Mandatory hand protection.

Brick cutting in the sand

To cut the product, you need to scratch a flat fishing line for a cutting trimmer on all faces. Its depth should be up to 5 mm. After that, the chisel or kirochka must be installed in the groove and thoroughly hit the tool. Harsh fixation is not needed. Brick can be put on a soft surface or pick up so that the separated part does not have a support.

How brick cutting is carried out

When processing the data of building materials, a pencil and corner are required, in addition to the main cutting element. It should be noted that this procedure is accompanied by the formation of a significant amount of dust, so it is extremely important to use personal protective equipment. The respiratory tract should be protected by a respiratory mask, eyes with protective glasses, and hands with gloves.

For a more accurate cutting of building materials, it is necessary to first apply the marking to its surface. For this, a construction pencil is used. Now you can start cutting, and you need to do this not along the line itself, but near it, otherwise, a fragment of bricks will not turn out as required as required.

Types of chamotis brick

Fireproof brick in composition is divided into 4 types:

Basic. Consists of 72% of chamotte clay, coke and chamotte powder. Used to release Bessemerovskaya steel.

Decorative fireclay brick

Fireproof brick made of chargen clay is expensive, decorative tiles are released to replace it. It imitates an expressive soft relief of the old manual molding material, has saturated flowers of burned clay. This universal brick is used for external and interior wall decoration, door, window openings, corners, arches, facades. The decorativeness of the masonry is achieved due to the variety of geometric shapes. This brick is thin, during decoration the area of ​​the room does not decrease, and the variety of colors will help create a unique atmosphere.

Why cut, chop brick

So, why in general stab or cut building materials?

Is it really so difficult to choose products of the right size from a wide range?

Different situations may occur at the construction site.

There is not enough half.brick to complete the row, the owner wants to decorate his house with elements of irregular shape.

Just cut it with a hacksaw.

To perform such ideas, an aggregate is necessary that can make a brick of any shape.

You can post building materials without problems at home, if you have the necessary devices at hand.

If in the end you get a product of the desired size and shape, you can easily lay a brick in a place intended for it, embody the original design or architectural idea.

Varieties of brick

Brick has been used in construction since ancient times. It is distinguished by enviable strength and durability. There are a fairly large number of types of bricks depending on the material from which it is made, as well as on what it is planned to be built (walls, furnaces, etc.).

Red brick

Classic brick, made of special varieties of clay and burned in a stove at high temperature, is called red for its color. It is widely used in various areas of construction and in the construction of individual residential buildings. The material can be cut at home with several tools that allow this to do this with the production of products that differ in a high level of accuracy. The cutting tool is more often a diamond circle. The appearance of the final structure largely depends on what to cut.

Hand.shaped facing brick

A distinctive feature of the brick manually is its unusual and attractive appearance. Used for facing work. However, it is quite expensive, therefore, in order to save money, the cutting of a hand.shaped brick is practiced in half along the length of the block. So it will take 2 times less material. Cutting is carried out with a diamond tool.

Facing hollow brick

Hollow brick has inner voids, which can be up to half of its mass. On sale there are products of all kinds of shapes (with ready.made roundings, beards, etc.), so you need to cut it not so often. If necessary, you can cut the material with any diamond device (corner grinder, saw, etc.).

Full-bodied brick of cross-format

The brick cross-format has an unusual shape: it is elongated (more than 29 cm) and narrow (about 4 cm). It is used exclusively for cladding. Cutting is carried out with the same tool.

Clinker brick

In the manufacture of clinker bricks, special refractory clay is used, so it is much stronger and stronger. Thanks to these qualities, as well as a variety of textures and colors, it is used for paving paths and yards, facing facades and basements of buildings. It is necessary to cut such material on special machines using water cooling.

Silicate brick

Silicate brick is made from a mixture of lime and sand (quartz rocks). The material is quite suppressed and therefore easily cut the corner grinding with a diamond circle. In the absence of this tool with work, you can cope with a simple hacksaw for metal.

Shamotny brick

Stone, or chamotnaya, brick is a heat.resistant building material that is used for laying fireplaces and furnaces. Cutting blocks are carried out on a special machine using a segment diamond circle.

Cutting the opening in a brick wall

Diamond cutting is considered a leading technology for organizing openings in a brick structure. The choice of equipment is determined by the complexity and scale of the work performed. The following devices equipped with diamond tools are used:

• angle grinder;
• benzores;
• Schwonarezchik;
• diamond rope;
• laser equipment;
• Asterase car.

Shamotny brick

Theme options

Search

Shamotny brick

Good health and good harvest! Comrades, what (what disk, inexpensive to) saw chamotomed brick. you need to cut 5-6 pieces. Advise.

There are “concrete” wheels, look the same as metal disks.

If metal, then garbage, very. quickly “sit down”, better ordinary stone.

The sweetness of honey is not justified by a bee with a bite

I think you can’t cut it at all. Fireproof brick.Extremely strong thing, say, the drill does not take it at all.

The sweetness of honey is not justified by a bee with a bite

The metallic ones were advised. I took in general Graphite. Cuts aka oil.was pleasantly surprised.

Well then, a way was found. Thanks for the experience. Py.SY. The real problem of fireproof brick to pinch.

I tried like that. decomposed barely starting to saw. So he hit panic. Thanks to all.

We also saw the metal one at first well, he was blown away on the 5th brick, they finished it with Boshevsky.

The sweetness of honey is not justified by a bee with a bite

There are good metal ones. The same Bosch. for example. saws and stone and metal

Features of the choice and area of ​​use of chamotis brick

When erecting structures, the operation of which is associated with high temperature modes, special refractory materials are used. In the segment of fire.resistant materials, not the last place is occupied by a brick from Chamot. What is chamotis brick and what its features will tell in the material below.

Features and scope

Chamotum brick what is it? A visually shame is a product of saturated straw-yellow color, its characteristic feature is a dense porous structure.

Shamotnaya brick. building material for 70% consisting of refractory or so.called chamotis clay. In addition to clay, the block includes special additives, in most cases, an additional component is aluminum oxide. Aluminum oxide has a considerable effect on the technical characteristics of bricks, its strength and resistance to negative chemical influences.

The fireproof properties of chamotte are affected not only by the composition of chamotis bricks, but also by the technology of its production. The technological map includes such stages as a molding of raw material and its further firing at very high temperatures. In the production process, all stages and temperature indicators are controlled by specialists.

The fireproof block of chamotte clay has found its application both in the industrial sphere and in everyday life. This fireproof material is used in the construction of furnaces, fireplaces, a furnace furnace lining, and smoke channels laying.

Types of fireclay refractory brick

Classification of building refractory material is carried out according to several characteristics, in particular:

According to the method of forming raw material material, the following types of chamotis brick are distinguished:

• cast from a slalker or melt;
• molded half.dry method;
• melted;
• hot.propressed;
• Thermoplastic.pressed.

Depending on the shape of the finished product, there is:

The most popular is the shame of a rectangular shape, when erecting arched structures, brick brick is indispensable.

• A particularly dense block. granularity does not exceed 3%;
• High.minded shag. the degree of porosity varies in the range from 3 to 10%;
• dense-granularity is 10-16%;
• Sealing refractory-porosity 16-20%;
• medium.density. the degree of granularity from 20 to 30%;
• Shadow with increased porosity-an indicator of porosity is in the range of 30-45%;
• Gunny brick lightweight. granularity from 45 to 85%;
• ultra.lighting. over 85%.

Specifications

Quality indicators of fireclay refractory building materials controls the state standard. GOST installed:

• the composition of the raw material material for the production of chamotte indicating the percentage of impurities;
• thermal conductivity of chamotis brick;
• porosity;
• the dimensions of chamotis brick;
• geometric parameters and other technical characteristics.

Today in the building materials market you can find chamotis refractory blocks made in accordance with the manufacturer. Indicators of such products may differ from the norms that the state standard establishes. When choosing a building material, it is better to give preference to the GOST product, the GOST mark is a guarantee of the quality of building material.

The main technical characteristics and their chamotte indicators established by the standard:

• fire resistance-1100-1800 0 s;
• Density-1700-1900 kg/m 3;
• thermal conductivity. 0.6 W/m 0 C;
• porosity-3-85%;
• Frost resistance class. from 15 to 50;
• strength class. from 75 to 250.

Advantages and disadvantages of building materials

Based on the technical characteristics, chamotis blocks have the following advantages:

• high fire resistance;
• high strength;
• resistance to atmospheric negative factors;
• resistance to deformation phenomena;
• long service life;
• Good heat capacity.

Chamotis size and weight

The weight of the charged brick presented on the building materials market varies in the range of 2.8-6 kilograms, GOST Standard sets the permissible mass of the product up to 3.7 kilograms. I would like to note that the thermal conductivity of the material depends on how much the shame weighs. The heavier the material, the longer it retains heat.

The size of the chamotum block depends on the brand and shape of the product. Despite the variety of geometric shapes, the most popular chamotis material in household construction is a rectangular chamotis brick. The size of the product, as a rule, complies with unified standards. The most common sizes:

Marking of chamotis brick

Marking on chamotis refractory bricks is applied on one of the faces of the product.

Marking consists of letter and digital designations (from 5 to 47). The letters indicate the physicochemical properties of building materials. The following letter designations are used to mark chamotte:

• Sha, SHB, Shak. General purpose chamotte blocks, characterized by strength and ability to withstand temperatures up to1690 0 C. These brands of refractory bricks are in demand among private developers, thanks to the optimal ratio of quality and cost of building material;
• SHV, noise. shared industrial purpose, differ in high heat capacity, is used to erect gas generators, cladding of the enclosing structures of convective mines;
• ShK. brick is used in the construction of industrial equipment for the production of coke;
• SHL. chamotum fireproof lightweight brick with a high degree of porosity, is widely used for functions of furnaces, withstands the exposure to temperature up to 1300 0 C;
• SHCA. bilateral end fireproof blocks from chamotte, found use in the construction of rotating elements of furnaces;
• PB. everyday shamot of domestic purposes;
• PV. refractory products used for the construction of chimneys, the inside of the fireplaces.

How to cut or cut a brick

The need to adjust the sizes of bricks arises in almost all types of work with this material. In order for the result to be of high quality and minimally time.consuming, it is recommended to use mechanized cutting methods, which will be considered further.

Subtleties of using circular saw

Today, the price is set for a brick, thanks to which it has found wide application in almost all construction industries. A stationary saw is used mainly for working with timber, for cutting bricks it is necessary to replace the usual disc, with a fiberglass reinforcement installed on it. such components are sold in household stores.

• It is recommended to cut bricks in the fresh air in order to be secured from inevitably formed dust;
• The obligatory element of equipment is protective glasses. fragments will fly;
• To protect the respiratory system, it is worth purchasing a respirator or at least a cotton-gauze bandage.

It is necessary to install a brick facing so that it “sits” as tightly as possible. 70 mm is the minimum allowable distance from the edge of the circle to the table, while taking too large discs is also not worth it. it will bend and interfere with work. The size of the pruning is set using a restrictive rail, which is closely pressed to the workpiece.

Overview of the capabilities of the corner grinder (angle grinding machine)

Special circles are used for cutting, the device must be equipped with a protective casing without fail. Experts always conduct a preliminary check. start the machine at idle for a minute. The power cord is assigned as far as possible so that it does not touch the moving elements. The corner grinder is held with both hands and released only after the disk is completely stopped.

Since brick and dry mixes are key building components, the cutting procedure may be needed even when the construction of small structures. Dust is always formed, therefore, as when using a saw, it is worth acquiring a respirator, unprofessional use of water jets is not recommended, since in this case the risk of trauma and equipment breakdown increases.

• The operator should be a little away from the point in the direction of which the device will be shifted if the reverse blow is formed. You need to understand that if you conduct the tool “from yourself”, the reverse blow will provoke a rebound towards a person;
• The machine is a particularly dangerous device, and its use requires maximum attentiveness and caution. You cannot cut brick in a state of intoxication or painful weakness of the body.

A reverse blow is the main risk factor, it occurs as a tool for the instrument due to jamming in the thickness of the brick. That is why the corner grinder involves providing comprehensively thoughtful and precisely coordinated operation.

Tool cutting

It will go much faster, more precisely and better, if you use a tool for cutting brick. His choice is not too extensive: usually used an angle grinding machine (corner grinder), benzores or a special brick cutting machine for this.

Without a construction square and pencil for applying marking, one cannot do in these cases. In addition, you will need personal protective equipment, since the cutting process is accompanied by the formation of a large amount of dust and small fragments. These are gloves, glasses and a respiratory mask.

Corner grinder

Than to cut the brick if you need a small amount of non.standard stones?

For this purpose, an angular grinding machine is best suited, which is popularly called a corner grinder. Unlike equipment, which will be discussed below, almost every home master has such an tool.

Advice. It is recommended to use a corner grinder with a capacity of about 2 kW. A less powerful tool may not cope with the task, but it’s hard to work too powerful.

A disk for cutting brick installed on the machine can be of two types:

Abrasive. inexpensive, but not too practical. It is quickly “erased” and can deform or crack during the saw process, which will affect the quality of the cut and safety of the master.

In any case, the optimal disk diameter is 23 cm. A smaller circle will not break the brick over the entire thickness, so it will have to turn it over in the process. But too big circles are not so convenient to work.

Diamond discs, in turn, differ in the type of edges and are: there are:

• With a solid edge. The cheapest of analogues give an even surface on the cut. But heat up during work and wear out faster.
• With a gear turbocharged edge. The cloves on it are located in a spiral, so the dust and other waste is well diverted from the working area. Such discs can be used for dry and humid cutting, they have the longest service life and the best working characteristics.
• With a segment edge. In such disks, cuts are made along the edge, dividing the working plane into separate sections. The section of the cut during operation with such a disk is constantly ventilated, so it heats up slower. But with wet cutting, there is a risk of waste flipping in slots, so it is used mainly for dry cutting.

How to cut bricks, and which disk is up to you to decide. Now you know about the features of any cutting nozzle.

You just need to remember that it is necessary to cut not exactly along the marking line, but a little retreating from it so that the marking remains “in the body” of the part you need. Otherwise, due to the backlash of the instrument and thickness of the cutting part of the disk, it will turn out less than the required size.

Holding a corner grinder on weight, it is difficult to make a quality cut. It is better to fix it and brick in a clamping bed. With its help, you can make a neat cut not only along or across the brick, but also from any angle.

A special bed for corner grinding faces will facilitate the work

It is very important when performing such work do not forget about safety precautions.

The instruction requires the following points:

The tool must be held with two hands so that when the reverse it does not break out of his hands and does not injure you or to others. This requirement will also ensure a higher cut accuracy.

During work, a stable position and the correct capture of the tool are very important

• An electric supply cable should be at the maximum possible distance from the working area in order to avoid cutting it or wrapping a disk with all the ensuing negative consequences.
• It is possible to release an angular grinder from the hands and put on the ground or other surface only after the disk rotation is completely stopped.
• The cutting circle must be closed with a protective casing. You can’t use a corner grinder without a casing

Brick cutting machine

Special brick cutting machines are expensive, it does not make sense to buy them for one.time work. This complex equipment is intended for those whose activities are related to masonry work.

It consists of the following nodes and elements:

• Metal bed;
• Power unit with an electric motor and a diamond circle;
• Brick or stone fixation system;
• Most models are also equipped with a water supply system to the sawing zone.

Such equipment allows you to quickly and with high accuracy will perform a cut of any complexity. At the same time, the master is always visible to the process of cutting, he can control it.

And the irrigation system minimizes the amount of brick dust thrown into the air, doing the work as comfortable and safe as possible.

How to cut a brick using this machine?

• You need to mark it and install it in the working area, fixing in the right position;
• The cutting part of the tool is lowered to the working area and focused on marking;
• Then turn on the engine and set up the speed of rotation, after which the cutting is carried out. In the photo. the process of cutting brick on the machine

Sometimes there is a need for cutting not individual bricks, but in cutting in brick laying of various niches, door and window openings. In such cases, the most effective tool will be a gas tank with which diamond cutting of brick walls is carried out.

Possessing great weight and considerable dimensions, it is not convenient for piece work, but indispensable for sawing masonry and dismantling work.

Benzorezer is, in fact, a circular saw with a gasoline engine, a cutting tool in which there can be a disk or a chain with diamond spraying. The saw with the disk looks like a large corner grinder, and with a chain. a chainsaw.

Cutting machine brick

Hello everyone, today we will look at a very useful machine that will make life easier for stovers. It will be about a machine that can cut a chamotis brick. Using a machine, you can cut a brick along into two thin halves, you can also cut grooves and so on. Everything was collected on the basis of a corner grinder with a concrete disk. The corner grinder is fixed at the right angle, which allows you to cut all bricks with the same depth. When cutting, it is not an angular grinder, but the brick itself, the broach is made quite simply. If you are interested in the project, I propose to study it in more detail!

Materials and tools used by the author:

List of materials:. node from car cardan gear;. square profile pipes;. leaf steel;. corner;. metal paint.

Step one. We base the basis for the machine, for this, profile pipes, corner or what is at hand is suitable for this. Then we need a hinge, the author used a knot with a cross from a car cardan gear. You can use a simpler hinged in the form of a bolt and nuts, the corner grinder will still be rigidly fixed during operation. Cut the cardan and weld the joint at right angles to the base.

When the bracket is ready, it must be welded to the hinges through a piece of the pipe. It is important to use the square here, you need to monitor that the cutting disk is at right angles relative to the base.

Step third. It is fixed to make a latch, which will fix the corner grinder at the right angle. The author painted the part by the hand with a marker on a sheet of metal and cut out a corner grinder. Well, then the detail was welded to the base using steel plates.

Step fourth. Rails, platform, clamps can be made from a profile pipe, to reduce friction, the author welded them “on the rib”. We make corners that will slide under the rails. Corners of the desired sizes can be welded from sheet steel.

Well, then we collect a sheet steel platform, there should be clamps for fixing bricks on the platform. Clamps should work as a vise, everything can be done on bolts with nuts.

Step fifth. Finishes are ready, it remains to paint everything so as not to rust. Install the corner grinder, adjust the depth and you can cut. The author easily cuts grooves under the grates, and also easily cuts the brick along the two halves.

The machine turned out to be simple and convenient, I hope you liked the project, and you found useful thoughts for yourself. Good luck and creative inspiration, if you decide to repeat this. Do not forget to share your ideas and homemade ones with us!

How can you cut bricks

Hi all. The fact that this is done by corner grinding and so it is clear, but it is painfully a lot of dust. About tile machines are also aware of, but buying a machine because of 15-20 bricks is somehow not hunting than you can saw full-bodied bricks? Maybe someone sawed a saber’s saw? Or a jigsaw

No, you need even saw and then sharpen again than? Bulgarian?

Ferrari wrote: maybe someone sawed a saber’s saw?

Yes, can I saw and sawed.Yes, a co-consumption, consumption.

What does it mean? And how it saws without chips? evenly?

Corner grinder without options. Rearrange the pen, get up in the wind, dust flies from you.

Expensive, in the sense of.Why buy a file on 15-20 bricks »?

Bkvel wrote: rearrange the pen, get up in the wind, dust flies from you.

IMHO. Read the Temko “Death from the Corner Grindow”. TB is written in blood, glory to the gods. Not ours.

Rasimovich wrote: IMHO. Read the Temko “Death from the Corner Grindow”. TB is written in blood, glory to the gods. Not ours.

Temko read. I have been working for many years. When I cut as an abrasive, I make sparks on myself when diamond. from myself. No problem.

Bkvel wrote: Temko read. I have been working for many years. When I cut as an abrasive, I make sparks on myself when diamond. from myself. No problem.

And many. For many years to you further. And you don’t want Darwin’s Prize ?

Rasimovich wrote: and many. For many years to you further. And you don’t want Darwin’s Prize ?

Why is this Yerniche? I have an angular grinder with KBS, about accidents with an open diamond disk has never heard. Want to walk in brick dust from head to toe. your right. I cut bricks for so many years until I got it. Now I saw from myself, I go pure, healthy and satisfied with what I wish you.

Bkvel wrote: Why is this a fucker? I have an angular grinder with KBS, about accidents with an open diamond disk has never heard. Want to walk in brick dust from head to toe. your right. I cut bricks for so many years until I got it. Now I saw from myself, I go pure, healthy and satisfied with what I wish you

The site is not all pros. You personally. You can do anything. But advise deadly stunts. for lovers, at least not professionally.

Rasimovich wrote: Advise deadly tricks. for lovers, at least not professionally.

Maybe I don’t understand anything (I ask seriously), but what’s the danger of cutting a diamond circle from myself? Even if the joshmka without KBSA. hold it tight, fix the brick normally and alga. Not?

bkvel wrote: I cut bricks for so many years until it got. Now the saw from myself, I go clean, healthy and satisfied

Many years. And a few minutes. When Dick’s clip occurs, and this will certainly happen.It’s a question of time. Do not think “just not with me. I’m immortal “. Just think about. children.

Rasimovich wrote: when Dick’s clip will occur, and this will certainly happen.It’s a question of time. Do not think “just not with me. I’m immortal “. Just think about. children.

I will be the campaign for the first dead from the diamond disk

And he cannot happen when sawing himself? Or this option is less dangerous in your opinion? The dispute is niocha.

Bkvel wrote: I will be the first to die from the diamond disk

Spit rather in the demon (through the left shoulder).We will all be there, but there is no need to rush.: yu

Bkvel wrote: And he cannot happen when sawing himself? Or this option is less dangerous in your opinion? The dispute is niocha.

When sawing “on itself,” corner grinder, with a clamping of a disk, flies from the operator. If the largest leg (eggs, etc., to choose from) in the minus. And recommend your work style not to professionals.Trying to get rid of competitors. You can strongly recommend work without a protective casing ? This is not a dispute. just elementary rules of TB.

Bkvel wrote: I will be the first to die from the diamond disk

Rasimovich wrote: On the site not all pros. You personally. You can do anything. But advise deadly stunts. for lovers, at least not professionally.

The question was so good to quarrel: how can you saw bricks without special dust? Yes, I can buy a saber for myself (and Bosch and Makita and Milka) and files to her! then come in handy in the country all this to me! It is important for me to drink all this without swinging dust!

Rasimovich. A lot of information is good, but you need to use it. You did not ask a question, but why this is the side handle to up to five fastening places? And the furrow was seen someday? Read, look and think more.

What a full brick you have? Wash that the canvases of the above for one will not be enough. If you really interfere with dust, but there is no vacuum cleaner and the streets, then soak the bricks in the basin with water for several hours, and saw the corner grinder.

Ferrari. Vacuum.grinding casing, vacuum cleaner and wind from the back.

Taels wrote: Dear, in the sense.Why buy a file more on 15-20 bricks?

So this is a file of 400mm, I don’t cut the walls and so 300-400r saw a brick facing and chamotnaya street and there is a vacuum cleaner too

Ferrari wrote: the question was so good to quarrel: how can someone saw bricks without special dust? Yes, I can buy a saber for myself (and Bosch and Makita and Milka) and files to her! then come in handy in the country all this to me! It is important for me to drink all this without swinging dust!

Buy a saber. The thing is beautiful. the working man does not hurt. Keramic brick canvases need to be used: those that used to be laid out. Debt will not live. They have tiny attacks. and a special canvas is enough for a long time