How To Cut A Profile At 45 Degrees

Table of Contents:

How to cut a pipe at an angle. marking options for round and profile pipes

When installing the pipeline, it is often necessary to cut the pipe at a certain angle. Accuracy plays an important role in this task. There are several easy ways to cut a pipe at an angle.

An incorrect pipe cut will make it impossible to mount a structure of the form that was originally conceived. For example, if you plan to rotate the system by 45 degrees, then you must cut the pipe at 45 degrees. To complete the task, you will need marking tools and an angle grinder (you can replace it with a hacksaw for metal).

Method of marking using a container with water instead of a template

This method of marking is suitable for small diameter pipes that are planned to be cut at a certain angle close to the edge. First you need to prepare a deep container of water. The planned angle of inclination is marked on it. Now you need to carefully immerse the end of the product in the liquid, tilt it towards the mark, and then pull it out.

As a result of such actions, a clear line of contact with water will appear on it, it must be highlighted. On it, the pipe is cut at an angle. This method is best for jobs that require multiple striping.

Using a computer program

To implement this method of marking pipes for cutting, a computer with special programs is required. First, you need to draw up a drawing, which indicates the transverse dimensions of the product, as well as the planned cut angle. Need to get a virtual template.

Print it out on a printer. And here it should be understood that the larger the pipe diameter, the more sheets will be required for printing it. Then you need to carefully cut out the drawing details from all pages and glue it, it is best to use stationery tape for this. It remains to attach the template to the pipe and apply the markings.

This method of solving the problem is highly accurate. All the necessary programs can be downloaded from the Internet, they are free to download and use. It will also be possible to find a pattern for cutting pipes at an angle. All that remains is to print and cut it. To carry out the marking, the piece is simply wrapped around the pipe.

Marking the corner with a paper sheet

Layout on paper is one of the simplest ways to accomplish a task. A square sheet is required. It folds flat diagonally. The resulting template for cutting pipes must be wrapped around the product so that the long side runs parallel to its section.

Then an angle of 45 degrees is formed on the smaller side. It remains to mark the cut line with a construction pencil or marker on a sheet of paper.

It is recommended to wrap the marking area with narrow tape so as not to accidentally erase it. This method is great for long, large pipes with a cut in the middle of the product.

How to cut a profile pipe at an angle

The marking of the profile pipe differs from the round one. Manual execution can lead to significant errors. The best way to solve the problem is to create a cutting template from the same profile, but with a larger diameter.

A small piece of shaped pipe will be required. On it, using a protractor, mark an angle of 45 degrees. Now, using an angle grinder, you need to cut off a part of the workpiece along the marked mowing line. The cut edges must be sanded and defects removed. All that remains is to insert the original product into the bevel cutting template. Then you need to mark the mowing line for the cut of the larger profile. And already the pipe itself is cut along it.

The text describes how to cut the pipe at an angle of 45 degrees. When the marking has already been completed, it is recommended to use an angle grinder. With its help, it will turn out to make an even cut. You can replace it with a hacksaw for metal. You can also cut the product by welding, but you need experience in handling the tool, otherwise there will be irregularities. Read also: “How to cut a pipe straight. cutting tools and methods”.

Pipe marking and cutting

The very process of marking the cut-off workpiece seems to be quite a simple matter. But it should be noted that the rounding made during the manual marking process will create an irreparable error after cutting, which will lead to inconsistencies and the formation of defective products. In order to eliminate such defects, it is required to make a simple tool for a clear marking of the profile parts. At the same time, cutting products at an angle of 450 is much easier.
A regular 45-degree U-shaped steel section is a reliable tool for accurate pipe cutting. In this case, the size of the profile for the ruler must be selected so that it becomes possible to easily position the cut profile pipe in it.

READ  With What Torque to Choose a Screwdriver

Manual pipe cutting tool

To perform such a tool marking the correct angle, you must also have the following additional tool:

• Protractor;
• Scraper for metal;
• Angle Grinder;
• Cutting disc;
• File.

A device for cutting pipes at an angle How to cut a pipe at an angle

It is not difficult to make a measuring tool for cutting pipes. To do this, it is necessary to cut a segment 20-30 cm long from the profile blank. Using a goniometer, it marks an angle of 45 degrees at any end of the segment. Next, cut off the profile with the angle grinder. The resulting template needs to be tested for accuracy. In case of deviations, file the measuring tool.

Using such a hand-made marking tool, the process of cutting pipes is much easier, especially with a large volume of pipes. To mark, it is only necessary to place the cut profile pipe in the made device and draw the correct angle with a scribe. During the marking process, the length of the products is controlled. Next, you need to cut the pipe clearly along the lines of the marking using an angle grinder. It is worth noting that at first the pipe is notched along the diagonal marks on both sides, then the straight, marked mowing lines are cut. These 45 degree pipe cutting templates will save you a lot of time and money.

How to properly cut a pipe at 45 degrees: tools

In various situations, household-level craftsmen often come to the question of correct marking for accurate cutting of pipe blanks at an angle of 45 degrees. Today, there is a huge selection of tools, both for the domestic and industrial process of cutting pipes at any angle. The cost of such devices can be quite high.

It is proposed to consider methods for marking blanks for cutting at an angle of 45 degrees in a domestic environment without the use of expensive professional equipment.

Marking and cutting circular pipes

When cutting round pipes at a 45 degree angle, the tool made for rectangular pipes is not quite suitable. For a more accurate. streamlined drawing of the mowing line of the cut at an angle, it is recommended to use a paper template, which is wound on the workpiece.

Patterns are developed in the modern world using computer programs.

the cut line changes depending on the angle and pipe diameter set in the program. Common patterns can be found on the Internet or remember about our painted rulers from school.

How to cut a profile pipe at an angle

The marking of the profile pipe differs from the round one. Manual execution can lead to significant errors. The best way to solve the problem is to create a cutting template from the same profile, but with a larger diameter.

A small piece of shaped pipe will be required. On it, using a protractor, mark an angle of 45 degrees. Now, using an angle grinder, you need to cut off a part of the workpiece along the marked mowing line. The cut edges must be sanded and defects removed. All that remains is to insert the original product into the bevel cutting template. Then you need to mark the mowing line for the cut of the larger profile. And already the pipe itself is cut along it.

The text describes how to cut the pipe at an angle of 45 degrees. When the marking has already been completed, it is recommended to use an angle grinder. With its help, it will turn out to make an even cut. You can replace it with a hacksaw for metal. You can also cut the product by welding, but you need experience in handling the tool, otherwise there will be irregularities. Read also: “How to cut a pipe straight. cutting tools and methods”.

When working on the installation of gas or water mains, it is often necessary to change the direction of the mowing line, while the pipeline is cut and then welded at the desired angle. Most often, the direction changes by 90 degrees, and the question arises. how to cut the pipe at 45 degrees in order to accurately connect the joints when welding.

It is possible to cope with the problem with cut edge angles of 45 or 90 degrees with the appropriate knowledge and techniques that will help save not only time, but also materials during work. At other angles of rotation, it is impossible to solve the problem with a ruler and a sheet of paper. you will have to call computer equipment for help.

Techniques for cutting pipes at an angle

Considering the methods of work. cutting straight or at an angle. one should take into account the different material of the products being processed. So, sleeves made of polypropylene or thin copper are easier and easier to cut than thick-walled steel pipes.

Small diameter plastic products are cut at the desired angle using special scissors. At the same time, you can control the angle with an ordinary protractor. Plastic pipes are also cut with a conventional hacksaw with a fine-toothed blade.

READ  How To Properly Cut Glass With A Roller Glass Cutter

The most frequent need for installation is cutting water, sewer and ventilation pipes at an angle of 45º.

Find out which tools can be used to cut at different angles.

The nuances of working with a rectangular section

To perform cutting of products of rectangular cross-section, it is recommended to prepare template cuts of the corners in advance. They are easy to make from a metal corner, having previously marked with the same protractor.

Marking can be done at different angles. To use a template in business, it is enough to attach it to a rectangular pipe in the right place and mark the cutting line. Then, with any suitable tool, cut along the intended mowing line.

Making a template for trimming a metal profile

If you need to cut a large number of pipes, you can make a template from a metal profile of a larger diameter on a paper sheet as described above. The angle of inclination is checked with a protractor or a construction square. in this case, the two edges of the cut template parts are connected.

When working on the part to be cut, a template is put on in the right place and pressed tightly, the markings are applied with a sharpened scribe when tracing the template contour. The part is cut in several passes with a gradual deepening of the groove.

Programs for calculating cutting angles

Curve cutting technology allows obtaining different cutting angles. But to form a piece at angles other than 45º, it will already be necessary to perform mathematical calculations and, according to the calculated data, cut out a template from paper or similar materials.

True, there are computer programs designed to save the foreman from making calculations. Patterns for cutting pipes such programs are printed on a printer.

A simple calculation program created on the basis of the MS Excel application allows you to calculate and create a pattern for almost any values ​​of pipe diameters and required cutting angles.

All the user needs to do is enter the corresponding values ​​into the “Outside diameter” and “Cut angle” cells. According to these parameters, a pattern will be formed that can be sent to print.

DIY pipe miter box

Using the template is not very convenient. you have to cut along the mowing line, keeping the angle grinder suspended, which leads to large errors. If you have a welding machine, you can make a simple miter box. guides for the disc of an angle grinder, preventing it from going to the side.

For this, a previously made template is used, in the side of which a hole is drilled and a nut is welded. When working, a homemade miter box is put on the profile, a bolt is screwed into its nut and the device is pressed against the profile surface. an angle grinder with a disc for metal makes a cut, slightly pressing the disc to the side surface of the device. It is clear that with long-term work, the edges in the miter box are gradually grinded, and although the process occurs simultaneously on all edges, some errors will appear over time. Therefore, it is better to make the device from hard wear-resistant metal in order to increase its service life and get a more accurate tool.

Pipes are a widespread building material. They are used in the installation of various systems. During the installation process, situations occur when the pipes must be joined at an angle. The technology for the production of such works is not standard, but you need to know about it.

To create complex joint configurations, bevel cutting of pipes is required. We will tell you how such operations are performed and what cutting methods exist.

Create an account or log in to comment

You must be a user to post a comment.

Marking the corner with a paper sheet

Layout on paper is one of the simplest ways to accomplish a task. A square sheet is required. It folds flat diagonally. The resulting template for cutting pipes must be wrapped around the product so that the long side runs parallel to its section.

Then an angle of 45 degrees is formed on the smaller side. It remains to mark the cut line with a construction pencil or marker on a sheet of paper.

It is recommended to wrap the marking area with narrow tape so as not to accidentally erase it. This method is great for long, large pipes with a cut in the middle of the product.

Using a computer program

To implement this method of marking pipes for cutting, a computer with special programs is required. First, you need to draw up a drawing, which indicates the transverse dimensions of the product, as well as the planned cut angle. Need to get a virtual template.

Print it out on a printer. And here it should be understood that the larger the pipe diameter, the more sheets will be required for printing it. Then you need to carefully cut out the drawing details from all pages and glue it, it is best to use stationery tape for this. It remains to attach the template to the pipe and apply the markings.

This method of solving the problem is highly accurate. All the necessary programs can be downloaded from the Internet, they are free to download and use. It will also be possible to find a pattern for cutting pipes at an angle. All that remains is to print and cut it. To carry out the marking, the piece is simply wrapped around the pipe.

How to cut 45 degree corners. How to cut at a 45 degree angle

Often during repairs, you can face a situation when it is necessary to saw off a piece from a part, at an angle of strictly 45 degrees. Typically, this is needed to connect two parts at right angles, 90 degrees, such as: door trim, plinth, pieces of furniture and much more. An experienced craftsman, professionally engaged in repair work, can often do without special devices, and practically by eye is able to cut the necessary part smoothly and clearly. But if you are a novice repairman, and you have a desire to do the work as efficiently as possible, without damaging expensive parts, then you just need to purchase a miter box. a special device that allows you to saw off material at a given angle without any special tricks.

READ  Husqvarna 135 Mark 2 Review

To work, you need to have: a miter box, a hacksaw, a protractor with a pencil, a workpiece made of wood, a screwdriver with screws or a clamp.

How to cut a ceiling plinth in the corners. options and methods

Ceiling skirting boards are an integral part of the finishing of the ceiling space. With their help, cracks and wall defects are masked, they can cover irregularities in a suspended ceiling structure or wallpaper. In addition, skirting boards complete the interior. One of the problems in the assembly process of these elements is the perfect joining in the corners. The question of how to cut a plinth to the ceiling in the corners is solved in several ways.

Advice for decorating the corners of the skirting board

For the very lazy, manufacturers have come up with such a method as decorating corner joints with overhead corners. At the same time, it is not at all necessary to measure the edges of the skirting boards for jewelry fit. it is enough to glue the strips, and close the uneven joints with decorative corners of the same color as the fillets themselves.

It will not be so cheap, but it will save a lot of time. especially if the apartment has uneven walls.

In the next article we will tell you how to make a rack ceiling on your own in an apartment or on a balcony.

Cutting “inner” corners

Important! To cut the “inner” corner, the fillet should be placed on the bottom of the miter box with the upper part. the one that will stick to the ceiling. In this case, the lower part of the plank should be firmly pressed against the wall of the tray.

Correct measurement of the length of the plinth according to its markings on the wall, drawing a “notch” with a pencil on the material for the future cut.

Installation of material in the miter box. The correct placement of the plinth in the tray will determine the correct cutting of fillet edges, and, accordingly, the accuracy of their placement on the ceiling.

After the plinth is installed and firmly fixed in the miter box (you can simply press the material firmly with one hand), a hacksaw is put into the groove at 45 °. The material can now be cut. The edges of the second plinth, which will be installed adjacent to the first, are cut in the same way, only as if in a mirror image (the plinth is installed in the opposite direction, the edges are cut in the same way at an angle of 45 °).

Important: when trimming the edges of fillets, jewelry precision is needed. otherwise the material will be damaged, and the appearance of the skirting boards at the joints of the walls will also be damaged. If polystyrene baseboards are used, then the edges can be cut off with an ordinary sharp knife without a miter box. However, remember that the corners must be cut from the front.

Using a ready-made miter box. Using a container with water

What if we are dealing with a small-diameter pipe, and we need to cut the pipe at an angle somewhere near the edge? A deep container filled with water will come to the rescue. Before starting work, you need to calculate the angle of inclination and make a mark on the container. Then we just have to carefully lower the edge of the pipe into the water and tilt it towards the mark on the container. We remove the pipe, mark the line of contact with the water, and boldly cut it along the markings. This method is optimal when marking a huge number of pipes. A ready-made template from a container of water will speed up the process of our work.

How to cut a pipe at 45 degrees

When installing the pipeline, it is quite often necessary to cut the pipe at an angle. over, the angle should have just the degree that is needed for the structure. If the corner is made incorrectly, it is unrealistic to make exactly the dimensions of the pipeline that were supposed to be made. For example, the pipe will rotate 45 degrees during installation, therefore, you need to know how to cut the pipe at 45 degrees. To do this, we need marking tools, an angle grinder or a hacksaw for metal.

Making a miter box with your own hands

Unfortunately, not everyone at home has the entire arsenal of carpentry tools, however, a semblance of a miter box can be made independently. For this, a rectangular tray of planks is knocked together, then grooves are sawn in the walls. at an angle of 45 °.

To measure the angle, you can use 2 knocked down boards and a protractor or an ordinary right-angled triangle. that’s the miter box and you’re done!