How to cut a tire with metal cord

What can be used to cut a truck tire? What kind of flowerbeds can be made from old tires: photo and video

Modern industry produces a wide variety of rubber, used in the most unexpected industries. Quite simply and quickly you can find the right rubber pad or the necessary rubber blanks at the nearest bazaar. However, if you still need to make a rubber product with their own hands, then you will need a couple of simple tips on how you can easily and accurately cut the rubber.

Rubber, there are quite a variety of properties, ranging from a very flexible and quite pliable material and ending with resilient strong rubber plates. Rubber can be used in many ways, for example, to cut a plumbing gasket of a suitable size, a heel for boots, or a non-slip base for a glass surface. Many people cut all sorts of animals out of car tires, swings, or make interior objects. You can make flowerbeds from car tires, but to do this you need to know how and what to cut a car tire.

The secret is very simple, in order to neatly and simply cut a piece of rubber, you will need a sharp knife, of course, and ordinary water.

A piece of elastic rubber, a sharp knife and water.

To begin you need to mark the line for the trimmer of the cut (it was enough for me just set the blade of the knife straight).

Start cutting the rubber with the knife.

Cutting thick rubber with a knife becomes quite difficult as the blade deepens into the thickness. Rubber begins to become ductile, and if you overdo it, it may even melt. To avoid this, and the knife through the rubber passed like oil, it should be moistened with water (not oil, in any case do not moisten with oil).

Wet the rubber with water and cut with a knife.

Rubber gets slippery when wet and the knife blade will not get stuck or melt the rubber, so you get an even and high-quality cut without much effort.

A rubber bar cut with water.

How to make a round hole in the rubber:

Sometimes you need to cut circles from the rubber, for example, for non-slip legs for stools, heels, or for gaskets between two panes of glass. In order to cut a circle out of rubber with an even shape you need to pick up a metal tube of suitable diameter, you will also need a matching diameter of the tube piston.

A is a metal tube, B is a piston

You need to sharpen the edge of the iron tube with a sharp file or file.

Sharpened iron tube

After you sharpen the tube, you need to insert it into the chuck of the drill, moisten the rubber with water and just start drilling holes, pre-lined with wood.

Drill the round rubber pads

With this unpretentious device and water you can drill out as much as you want flat, accurate rubber kruglyagovyh (I use them for what would make non-slip legs for devices). Sharpened tube acts like a drill, but as you drill the circles it is filled with them, and in order to get them out and need a special plunger. You then just squeeze the rubber circles out of the sharpened tube.

Push the rubber bands out of the tube with the piston

The main thing is not to forget to wet the rubber with water when drilling or cutting. It should be noted that to cut a circle, with a sharpened tube is much easier and more convenient than the classic way. with a drill. However, if you need to drill through the rubber with a drill bit, it is also quite simple to do it pre-sharpened, and periodically dipping the drill bit in water.

It is necessary to drill the rubber at low speed and periodically wetting the cutting edge. However, if you need to drill a large rubber bar at high revolutions, you should preferably immerse it completely in water.

Drilling rubber in water with a drill bit.

As a last resort, holes in thin rubber, like in plastic, can be melted by heating a drill bit shank or an iron tube with a lighter flame.

Drilled holes in rubber

The main thing is to be careful when working with red-hot metal. Also remember that rubber can release toxic substances when overheated, so melt the holes under a hood or in a well-ventilated room. Follow all safety rules even when drilling rubber.

I think from the photo it will be clear why to cut the tire. Indeed, they do not rot, and from the sun-frost they do not sprawl. Accidental shocks, unlike asbestos cement sheet is not harmful to them. After all, there are many uses for rubber strips. Even if not edging, as I did, the beds. Even if you do not cut the tire into strips, the hoops obtained from it can be used as a compost box or a vertical bed. Yes, I hear a lot of, that, they say, harmful, terrible and all that. I don’t know. But my ants make their summer clutches and incubators near the rubber where they keep their pupae. If the rubber is bad for you. I don’t think they’d work that way. And if they’re not afraid, it’s not good for me either. Okay Everyone decides this question for himself. But who decides to cut up a tire for their own needs? A few tips:

Start cutting the tire with a shoemaker knife. We go over the same cut several times, pressing on the board to make the cut go away and cut through. Now we put into the cut a good knife with sharpening edge towards ourselves (I made a special cutter from the blade of industrial hacksaw) and we cut with “up-on” motion, simultaneously bending aside the cut. Cutting a tire like cutting a loaf. ♪ don’t ♪. Blow up the rubber. And it is not necessary for the knife to be razor sharp: a slight burr sawing. only for the good.

I recommend that you unscrew the tire for the winter and let it sit out. Otherwise, when cut, it will become a wave. We need to remove the trough, which will give a long curing of the hoop. Or you could do something else. Make a bunch of notches on the turned out tire.

See also  How to make a hole in metal without a drill

You can cut the hoops into ribbons with a regular, small angle grinder. Only take care that the wind is not on your neighbor’s side, otherwise you won’t avoid the untranslatable play on words (in one of the local dialects), because this case. stinky. BUT! The rubber is nicely cut with an angle grinder, the metal cord is also cut with an angle grinder, and. Basically, cut the tire. It’s a quick thing to do if you see how to do it once in a while. And just to be clear. Here’s a video where the cutting of the tire is done in real time.

The pitfalls of the tire

When processing and making products from old tires, there are pitfalls that are hidden from view, and appear only directly in the process. These stones are the subject of this article.

The catch Material. rubber.

The tire has to be permanently fixed or at least the part of it that is being cultivated has to be fixed. In our case, we have developed an original method of cutting a tire. For this reason it is necessary to cut the tread first of all while the tire has the maximum hardness. In case you need to cut the tire tread and you can’t see anything, you can use a glass jar, but after sawing 5-6 cm you should move the jar.

tire, metal, cord

The threads of old and new tires are different, and the results t.е. The properties of the cutting elements are different. To illustrate, if you make a swan from a bald tire, the swan’s head is bent forward, but if you make it from almost new tire, the head is bent backward.

How to cut rubber with a knife:

Rubber, there is quite a variety of properties, ranging from very flexible and fairly malleable material and ending with a resilient solid rubber plate. Rubber has a variety of uses, such as cutting a proper-sized water gasket, a heel for boots, or a non-slip base for a glass surface. Many people carve all sorts of animals out of car tires, swings, or make interior decorations. You can make flowerbeds from car tires, but for this you need to know how and what to cut a car tire.

The secret is very simple, in order to neatly and simply cut a piece of rubber, you need a sharp knife, of course. and ordinary water.

A piece of elastic rubber, a sharp knife and water.

To begin with you need to mark a line for the trimmer of the cut (it was enough for me just to set the blade of the knife straight).

Cutting thick rubber with a knife becomes quite difficult as the blade deepens into the thickness. Rubber begins to become viscous, and if you overdo it, it can even melt. To prevent this from happening and the knife going through the rubber like butter, it should be moistened with water (not with oil, never with oil).

tire, metal, cord

Rubber gets slippery when wet, so the knife blade won’t get stuck and melt the rubber, and you get a straight, quality cut without much effort.

A rubber block cut with water.

How to make a round hole in rubber:

Sometimes you need to cut circles out of rubber, for example, for non-slip legs under stools, heels, or for gaskets between two panes of glass. In order to cut an even shape mug out of rubber you need to find a metal tube of suitable diameter, you also need a matching diameter of the tube piston.

You need to use a sharp file or file to sharpen the edge of the iron tube.

After you sharpen the tube, you need to insert it into the chuck of the drill, moisten the rubber with water and just start drilling holes, pre-drying a piece of wood.

Drilling out round rubber gaskets

With this unpretentious device and water you can drill out as much as you want flat, neat rubber kruglyashki (I use them for what would make non-slip legs for appliances). A sharpened tube operates on the principle of a drill, but as you drill the circles it is filled with them, and in order to get them out and need a special piston.

Cutting rubber

Collecting rubber is similar to collecting birch sap Source com The word “rubber” comes from the Latin “resina”, which translates to “resin”. Seemingly nothing in common, but it’s only at first glance. To obtain the finished product, the resin extracted from the rubber trees is mixed with a vulcanizing agent (usually sulfur) and after the vulcanization process, an elastic material known as rubber is obtained. Despite the fact that such substance does not have a high density, it is viscous, so the question of how and with what to cut the tire, never loses its relevance.

Stationery knife

The box cutter is also good for cutting plastic sheets. And, even beginners can cope with it. The main thing is that the knife was of good quality, and the work was not performed in a hurry. the blade of such tools is very sharp and you can not only make the wrong cut, but also hurt yourself. A clerical knife is suitable for honeycomb sheets 4-6 mm thick, but it is already quite difficult to work with 8 mm sheets. On thicker sheets of polycarbonate cutting is almost impossible, so the experts recommend using a knife only where it is necessary to trim the material, and even then, on sheets up to 10 mm.

See also  Which wrench is better electric or pneumatic?

Electric jigsaw

If you have a jigsaw, you may consider that you have won the lottery. This option of trimming is the most optimal. Thanks to the high RPM of the jigsaw, you will not damage the upper surface of the laminate, you will not have to exert any special physical effort, a powerful motor will do everything for you.

Masters recommend using special files for trimming laminate boards that are designed for this job. Unlike standard saws, they have a smaller spacing between the teeth, which guarantees the safety of the coating.

How to make a round hole in rubber:

Sometimes you need to cut rounds out of rubber, for example, for non-slip legs under a stool, heels, or for gaskets between two panes of glass. In order to cut a mug out of rubber with an even shape you need to find a metal tube of suitable diameter, you also need a piston that fits the diameter of the tube.

You need to sharpen the edge of the iron tube with a sharp file or file.

After you sharpen the tube, you need to insert it into the chuck of the drill, moisten the rubber with water and just start drilling holes, pre-lined with wood.

Drilling round rubber spacers

With such unpretentious device and water it is possible to drill many flat, neat rubber kruglovolshki (I use them in order to make non-slip legs for devices). Sharpened tube operates on the principle of a drill, but as you drill circles, it is filled with them, and in order to get them out and need a special piston.

How to cut a truck tire into pieces.

You then simply push the rubber rounds out of the sharpened tube.

The main thing is to remember to wet the rubber with water when drilling or cutting. It should be noted that it is much easier and more convenient to cut a circle with a sharpened tube than in the classical way. with a drill. However, if you need to drill through the rubber with a drill bit, it’s also pretty easy to do by pre-sharpening it, and periodically dipping the drill bit in water.

It is necessary to drill rubber at low speed and periodically wetting the cutting edge. However, if you need to drill a large block of rubber at high speed, it is advisable to immerse it completely in water.

Drilling rubber in water with a drill bit.

In the most extreme case, the holes in the thin rubber, as well as in plastic, can be melted by heating with a lighter shank drill or iron tube.

The main thing is be careful when working with red-hot metal. Also remember that rubber when overheated can release toxic substances, so melt the holes under a hood or in a well-ventilated room. Follow all safety rules even when drilling rubber.

How to cut a truck tire into pieces.

You then just push the rubber circles out of the sharpened tube.

The main thing is to remember to moisten the rubber with water when drilling or cutting. It should be noted that it is much easier and more convenient to cut the circle, using a sharpened tube, than the classic way. with a drill. However, if you need to drill through the rubber with a drill bit it is also quite easy to do after sharpening it, and periodically dipping the bit in water.

Use low speed and periodically wetting the cutting edge to drill through the rubber. But if you have to drill a large block of rubber at high rpm you should immerse it in water completely.

Drilling rubber in water with a drill bit.

In the last resort, holes in thin rubber, as well as in plastic, can be melted by heating a drill bit shank or an iron tube with a lighter flame.

The main thing is to be careful when working with red-hot metal. Also remember that rubber can release toxic substances when overheated, so melt the holes under a hood or in a well-ventilated room. Follow all safety regulations even when drilling rubber.

What to cut a car tire with?

When you need to cut a car tire (tire) with your own hands, it is better to know some tricks that will not only help make this process more enjoyable and less time consuming, but will also help protect you from injury and make the cut better.

Because the surface where the tire touches the ground is harder to cut, because there is metal cord.

For this you can use, as well as a hand saw, lubricating it with oil or soap solution, or an angle grinder with a disk on metal.

I must warn you if you have never used an angle grinder before, it is better to use a hand hacksaw, because the clamping of the disk when cutting tires is not difficult to catch. This procedure requires a firm grip on the tool and the ability to saw correctly.

Since the cutting is done with a sharp knife, which is constantly moistened with a soapy solution, oil or at least water.

When cutting, it is best to pull away the piece to be cut to reduce resistance for the blade.

Such a procedure is indispensable for making various self-made items out of tires, from variously designed flowerbeds to original garden figures and sculptures.

Car Features: Car dimensions are as follows, length. 3826, width. 1100, height. 1323 mm. Wheelbase is 2382 mm. Ground clearance 211 mm. The vehicle is equipped with a hybrid power unit. The 2-cylinder engine is equipped with a system that provides power output to the motor. Four valves per cylinder.

From all of the above we conclude.

To process, cutting up an old tire is necessary:

  • working table on which to cut the old tire (see Trick 1) or at least just a table;
  • Jigsaw for metal, jigsaw, drill, angle grinder (see Trick 2.3). in a word may need everything;
  • Hand protection (gloves), eye protection (mask, goggles) all the necessary means of protection when working with power tools.
  • Persistence and patience, and what is not unimportant physical strength (try the wheel to turn several times)
  • It is easy and simple to cut even the rubber of BelAZ. I bought a RAGE disk and put it on a simple handheld circular saw. You can buy the original RAGE circular saw, but it is cheaper to buy a disk, as I did.
  • if you want to cut across. then an angle grinder and a disk on metal. I have cut more than once. discs didn’t burn out, but there’s a lot of black stuff flying around, and that’s if it’s fast. If you don’t have an angle grinder, you just need a regular metal saw. You need a t for metal.к. when cutting across the tire, you need to cut the metal cord.
See also  Metal wheels for your own hands

If you cut ONE side (around the circumference) then. I don’t know. Perhaps a sharp knife and soap as above, or a jigsaw. That’s if you don’t run into cord.

Videos of how to cut the tire can be seen here.

Home, garden, horticulture, household: questions and answers!

How and what to cut tires for crafts?

The smell, the fouling. it should be so, in any other way angle grinder tire can not cut.Diameter of the disc on the angle grinder is smaller, 1.2 mm. Metal discs, t.к. there reinforcement is better. Work with gloves, wipe off dirt with gasoline. it is better to cut tires with an angle grinder with grease: graphite grease, oil, waste, soap solution or soap itself (your choice). No grease is suitable, the angle grinder is even more sticky. the cutting process in steps:- outline the sawing strip with a sharp nail Use an angle grinder with a small disc and go all along the cut line without pressure Do this operation several times, deepening the cut Work without pressure.

This method is the most trouble-free, cleanest and effective. Work with soapy water and wetting. At maximum speed, with metal saw. The cut is straight, smooth, there is no smell or burning.

Vibroblade works great, use with grease, better to use silicon grease. But to cut metal cord, a vibrating knife is not suitable; it only cuts rubber, and for cord, use an angle grinder.

A fine-toothed metal file can also cut through the metal cord, but it takes too long. It is more effective to use a saw with coarse teeth. The wire tears and the process is faster. In my experience, it takes two coarse-toothed saws and 20 minutes to cut one bar. The cut is sloppy and the rags should be cut with an emery (thick) wheel.

This method is for physically strong people, and for those who do not have electrical appliances for some reason. You need two axes, one as a chisel, and the second to hit it from above. Instead of the second axe, you can use a sledgehammer or something similar.

The knife should be well sharpened, strong.The process is quicker and easier if you lubricate: soapy water, solidol, lithol, glycerin (your choice). To cut the metal cord, the same metal hacksaw.

Soldering iron Handyman adapts a soldering iron by perfecting a sting for a soldering iron with a sharpened steel tip.

How to cut the tires for the flower bed?

To cut the rubber take a blade with a reverse tooth of good steel. If you have to cut the tread, it is useless to do it with a jigsaw or a knife. At any rate, you can use an ordinary knife. Blades of special steel can cut even iron cord, but it is unlikely that anyone would want to damage such a tool on an old tire.

To disassemble the disks of the car with a homemade machine is possible with this sequence:

  • Remove the wheel and place it on the flange of the tire changer, secure it using a clamp;
  • use the narrow end of the tire iron to push the edge of the rubber outside of the rim;
  • Complete the removal of the tire by completely removing it from the rim;

Can you use an angle grinder to cut rubber??

Rubber is cut with a knife with a good blade. You can’t cut rubber with an angle grinder. For if the disk will fly off in the head, when it breaks up, and it can break up. you won’t be able to create new topics.

Cut with a utility knife and a heavy, sharp knife, starting at the side walls. The side walls have no metal reinforcement, only heavy reinforcing nylon or composite cords, so they can be cut with a knife or a heavy utility knife. insert the tip of the blade into the cut along the side walls.

What to paint the tires for the flower bed?

Usually oil, enamel or nitro paints are used for this purpose, spray auto paint is good for clean rubber. The aerosol can allows you to handle the painting very quickly and well. So that the bed does not overheat in the sun, tires are covered with light paint, complemented by some kind of pattern.

Rubber is cut with a knife with a good blade. Do not cut rubber with an angle grinder. For if the disk will fly off in the head when it crumbles, and it can crumble. you will not be able to create new threads.

What you can make from old tires?

Take two tires: one slightly larger, the other slightly smaller. Use the smaller one as a base and the larger one.put it on top. Cut off the top of the large tire so that it has a circle shape on top, not a ring. This way the tire will look more like a cup.