How to cut cornices on a stretch ceiling correctly. The choice of parameters

How to Install Crown Moulding

How to cut the ceiling skirting board with your own hands correctly

Ceiling cornices with decorative plastic blend and rotary elements is a modern and practical model that will fit into any interior. Plastic cornice is very easily versed, because when it is technological assembly in production, no special tools such as adhesives or screws are used. All the details of the cornice are made with special locks for its assembly.

For example, a ceiling cornice can be transformed on your own at home into an integral cornice of two parts or make it shorter according to the sizes you need, without prejudice to its appearance. The main thing is, by mistake, do not cut the front decorative plastic blend, otherwise your cornice will lose its attractiveness and visual integrity.

In order to shorten a two.row ceiling cornice with rotary elements, it needs to be carefully, holding the decorative blend, disassemble the side of the side, remove the rotary element and sawn off the extra piece of the profile. Then attach the rotary element back, stretch the decorative blend by profile and attach it to the rotary element, measure the decorative blend and sawn down. The assembly of the cornice is carried out carefully and slowly in the reverse order, holding a decorative blend when fixing it on rotary elements. If, for example, you need to cut a plastic cornice, then it is advisable to completely disassemble it, free the cornice profile from decorative blends and rotary elements. this will be more convenient for you to sprinkle the profile of the cornice. With a direct cornice without turns, the process is even easier.

We draw your attention once again to the fact that no matter how you cut the plastic profile of the ceiling cornice. do not cut the front decorative blend. Decorative plastic blend should always be whole along the entire length of the ceiling cornice. You can trim the decorative blend after final fitting. The advantage of ceiling plastic cornice is the simplicity of installation.

The length of the cornice is selected respectively, so before buying, carefully measure the window width.Shops usually offer different lengths of cornice, and in some stores you can order a product of a certain length. But what if we have problems finding a suitable length of the cornice? Solution. buy a long cornice, and then cut it in size, or purchase cornices to order.

How to shorten a plastic cornice

Ceiling cornices with decorative plastic blend and rotary elements is a modern and practical model that will fit into any interior. Plastic cornice is very easily versed, because when it is technological assembly in production, no special tools such as adhesives or screws are used. All the details of the cornice are made with special locks for its assembly. For example, a ceiling cornice can be transformed on your own at home into an integral cornice of two parts or make it shorter according to the sizes you need, without prejudice to its appearance. The main thing is, by mistake, do not cut the front decorative plastic blend, otherwise your cornice will lose its attractiveness and visual integrity.

In order to shorten a two.row ceiling cornice with rotary elements, it needs to be carefully, holding the decorative blend, disassemble the side of the side, remove the rotary element and sawn off the extra piece of the profile. Then attach the rotary element back, stretch the decorative blend by profile and attach it to the rotary element, measure the decorative blend and sawn down. The assembly of the cornice is carried out carefully and slowly in the reverse order, holding a decorative blend when fixing it on rotary elements. If, for example, you need to cut a plastic cornice, then it is advisable to completely disassemble it, free the cornice profile from decorative blends and rotary elements. this will be more convenient for you to sprinkle the profile of the cornice. With a direct cornice without turns, the process is even easier.

We draw your attention once again to the fact that no matter how you cut the plastic profile of the ceiling cornice. do not saw the front decorative blend. Decorative plastic blend should always be whole along the entire length of the ceiling cornice. You can trim the decorative blend after final fitting. The advantage of ceiling plastic cornice is the simplicity of installation.

Recommendations for choosing a cornice

Before buying, it is advisable to determine the approximate design of the curtains. For light curtains, a plastic crossbar is enough, and for heavy curtains you will need a strong aluminum or metal cornice.

We will immediately make a reservation that both ceiling and wall models can be installed in the niche, but it is better to give preference to the first option. Such cornices are much more compact, it is easier to hide behind a stretch sheet. Otherwise, you need to lower the ceiling below, and this will reduce the height of the room.

Curtains are hung in several rows: just tulle, with curtains or additionally decorated with lambrequins. Depending on the number of curtains, you need to purchase one, two, three or four.year.old cornice. This moment is also better to think in advance.

Advice! If you hang the ceiling tire on the entire width of the room, the curtains can be spread on both sides of the window. So more light will penetrate the room.

Basic installation guide

Please note that for the correct calculation of length, you need to measure the length of the window opening, and then add 40 centimeters. When you have to work with the windows located in a row, you will need to add another thirty centimeters to the width of the opening.

The pros and cons of the stretch ceiling with a niche for curtains

Before starting the installation of a stretch ceiling and a niche under the cornice, you should weigh the pros and cons of. Like any other design, a stretch ceiling with a niche for curtains has a number of its features, which you need to know.

  • Hidden cornice in a stretch ceiling can be mounted in any room. in the kitchen, bedroom or in the living room;
  • The hidden recess closes the aesthetic details of the curtains and curtains (fasteners, rings, clamps, hooks, electric drive, drapery braid);
  • As a material for the design, any types of stretch fabric (film or fabric), various types of curtain profile and fasteners can be used;
  • For design, you can use ceiling or wall cornices;
  • Using a stretch ceiling with a recess for curtains in the room, it becomes much lighter, the space visually increases in height, especially if a canvas with a glossy or mirror surface is used;
  • If a diode ribbon is used in the design as a backlight, then the room creates an original and unusual effect of a “soaring” ceiling;
  • When changing the general design of the room, you do not need to re.select the cornice, after the repair you can simply replace the curtain canvas.

Options for decorating deepening under a hidden cornice

The stretch ceiling with a recess under the cornice has practically no minuses, except for the fact that the installation of the upper level and the arrangement of the window space under the curtains should be carried out simultaneously. After installing and final finishing the PVC ceiling with a film or drywall, it will be almost impossible to make a deepening under the cornice without dismantling the entire structure.

General installation rules

Much depends on the quality of installation. The inept installation of the structure will nullify all the advantages of the last. Therefore, it is impossible to relate to the process of fixing the cornice irresponsible.

First of all, in many respects, the high quality of the installation is required by the presence of preliminary marking. it should be applied with maximum accuracy, especially in cornices, the main guides of which are composite.

The second important point is that in most cases, errors made when working with stretch ceilings are difficult to fix. Therefore, you need to try to do everything carefully the first time.

The third rule: almost all cornices are attached to the edges, and then the fastening points go at least after a meter one and a half meters. It doesn’t matter whether they attract the cornice directly to the surface, or installation is carried out using remote brackets.

How to choose the right bar for curtains?

Many are wondering which cornices are better to choose for suspended ceilings? In fact, it all depends on the taste and what you want to see in the room. The main thing is that stretch ceilings and cornice are combined and comply with the standards.

Before proceeding to fastening the rails under the curtains to the ceiling, you should think about the curtains themselves. The material of the device used largely depends on the type and weight of the curtains. It is worth paying special attention to this, then the curtains will show off on the windows for a long time.

There are such designs for curtains:

cornices, stretch, ceiling, correctly
  • profile. This is a design made of plastic or metal. It has from one to several paths for placing curtains. There are also baguette species. Their peculiarity lies in the presence of the attached baguette from the outside;
  • “Strings”. For their fastening, brackets are used, which are placed on the ceiling. They are connected, the so.called “strings”. These elements hold curtains. Such strips on suspended ceilings do not provide for the weight of heavy fabrics;
  • stick. Attaching a cornice of this type is not difficult. In its design, it looks like a “string”. The main difference is the presence of pipes instead of wire.

The most popular among the above devices is the profile design. The last two are less popular due to the presence between the ceiling and curtains of free space.

Methods of fastening

There are many methods on how to attach the bar.

The choice depends on what the weight of future curtains will be. If the curtains are planned to hang the lungs, then you can install the embedded design and yourself. To do this, it is enough to install the rails on the surface of the ceiling.

It will be a little more difficult to cope with the plaster base. Such work will require skills. It is worth considering that such a design can withstand only some types of planks and fabric.

In order to establish a visible ceiling cornice, it is worth first to prepare special supporting bars.

They are installed under the cornice in the stretch ceiling. These details are necessary so that the mount is well held and can withstand curtains of different weights. In the process of installation, the bars are hidden under the material itself, so they, in general, are not visible on the surface.

Stretch ceiling with hidden cornice requires a special approach to installing. The built.in design must be fixed only on concrete slabs in a niche under the cornice, and the material of the ceiling will be pulled in front of the curtains.

A correctly made niche to install a cornice in a stretch ceiling plays a huge role.

Visible devices must be fixed after accurate marking on the ceiling.

Suspended rails are also hung on wood bars. They need to be pulled on top with the material, and after a full drying of the canvas, you can proceed to fix the racks. You need to install a cornice of this type immediately on the surface of the canvas, but extremely neatly so as not to damage the material.

Any work on suspended ceilings should be carried out extremely delicately. The canvas is very tender, so it can be easily damaged.

To say exactly which cornices for curtains for suspended ceilings is better, you can’t. Someone wants to see a built-in cornice, and in someone there is a desire to choose an external. In any case, work with a cornice of any kind is best trusted to a professional master.

The design of living space often provides for the decoration of the ceiling. Very many have recently installed a vinyl canvas on the ceiling surface, but later they are faced with the fact that they do not know how to install a ceiling cornice on a stretch ceiling. The question is really important, requiring detailed consideration, because the aesthetic appearance of the entire room will depend on this.

What is the main problem

Difficulties with the installation of such parts arise due to their weight. Polyurethane is much denser than polystyrene and, accordingly, has a large mass. At the same time, some varieties of such details can simply be glued to the wall. they are still light enough to hold well, but difficulties arise with flexible polyurethane moldings.

In their structure, such jewelry resembles rubber, almost possessing the same mass with it. This is the main complexity of the installation. heavy decorative elements simply can not resist, if they are glued with only one side, as everything happens with stretch coatings. They do not hold too well and can fall off at any moment. To avoid this, you need to look for an alternative option for installing and such methods exist at least two.

cornices, stretch, ceiling, correctly

Installation of heavy products

So that even flexible details are well fixed, they are attached not on glue, but on screws, nails or with dowels. The installation process in this case is quite complicated, since it is necessary to drill holes in the wall and achieve an accurate coincidence of holes on the details with the place of its fastening. After installation, you will need to plunge the points where the screws are screwed. If this installation method is not suitable for some reason, you can use another approach.

This method will allow the installation of polyurethane cornices to the stretch ceiling without using dowels or screws. Everything will be much easier. it is enough to cut long details into shorter segments and each of them glue separately. At the same time, the joints of the fragments will not be visible. Since after gluing they are processed with putty.

It is worth considering that all parts from polyurethane should stick directly to the walls of the walls, and not on the wallpaper. If you glue such a heavy decor on a wallpaper, it will inevitably move away from the walls under its oar. Therefore, the procedure for the work when performing the decoration of the premises will be determined by the installation of cornices. first they, and only then the wallpaper.

Features of fixation of the cornice to the stretch ceiling

Contrary to the widespread opinion that the ceiling cornice is not installed on the tension material, the possibilities of using structures are still. You just need to think through this moment before installing the ceilings.

A beam is attached to the ceiling base plate with dowels, equal in length to the dimensions of the future cornice. On the material you need to install rings, which then will help to fix the structure using self.tapping screws. Then the ceilings are pulled, and the cornice is installed in the desired place.

With stretch ceilings, you can attach the structure to a horizontal surface with a hidden way. In this case, the material of the ceilings will not be departed from the wall, but from a special beam, and the panels of the curtains will fall directly “from the ceiling”.

If the stretch ceiling in the room is already installed, then the latch will have to use a wall.

Is it possible to fix the ceiling cornice using glue?

Thanks to modern technologies, you can do without making holes in the ceiling and attach the structure with liquid nails. Innovative developments guarantee long.term and reliable fixation.

High.quality adhesion is possible only in preparing the base, cleansing it from old paint, leveling roughnesses.

The surface is primed, the base of the product is checked for dryness. Liquid nails are applied to the “snake” base, then the cornice is crushed with force to the ceiling. If you need to adjust the position of the tire a little, it is shifted without tearing it away from the ceiling.

Glue sets after 15-20 minutes, and completely dries in a couple of days. All this time, you do not need to believe the strength of the structure, trying to move it out of place, this will only lead to air entering the product and reducing the degree of fixation.

Types of cornices for stretch ceiling

Depending on the functional purpose, two types of these products are distinguished:

    For curtains. The canvas is not carried out directly to the PVC, since the thin material is afraid of mechanical damage and does not withstand the weight of the structure. When installing on the wall, you need to be extremely careful so that the hook does not damage the ceiling. Fabric canvases are more durable. It is more difficult to damage them, but still you need to monitor the location of sharp elements.

    Wood. Such models are of environmental friendliness, massiveness and heavy weight. They look very presentable, but they will cost a lot.

    Visible. Easily installed, made from different materials and are suitable for fastening any curtains.

    Cornice-stang. The most common model. It is presented in the form of a round rod, which is fixed with special brackets to the wall or ceiling coating. The rings on which the curtain holds are moved along this rod.

Installation technology of ceiling cornice for stretch ceiling

The desired model is chosen, it remains to figure out how to fix the cornices to the stretch ceiling. First you should decide how the fixation will be carried out. open or closed. Please note, in any case, a wooden block will be needed for fastening.

Visible fixation of the ceiling cornice to the stretch ceiling

Installing cornices for a stretch ceiling with an open method using a embedded beam begins even before the mounting of the canvas.

    Before the installation of the baguettes for the stretch ceiling, we measure and mark the future place of fastening of the cornice.

Invisible fastening of the ceiling cornice on a stretch ceiling

Installation on the stretch ceilings of the cornice in the niche differs significantly from the open method. The model needs to be purchased in advance, because the canvas is made in size and the canvas is made.

In the process of fastening, we adhere to the next algorithm of actions:

    On the base coating, we make a marking of the cornice fixation.

The string ceiling for suspended ceilings is more often used for hidden installation, but remember that it is not intended for heavy curtains and can sag, creating an ugly effect. Give preference to reliable constructions.

Cornices for curtains

Most often, with such products it becomes necessary to cut them down along the length. At the same time, it is necessary to make the most even possible cut so that the end of the curtains looks beautiful and neat. In this situation, a knock will help. you only need to put the bar inside the device with a hacksaw inserted into the corresponding groove gently saw off it.

If you have the question of how to correct the corners in a plastic cornice to connect it with a neighboring fragment at a certain angle, then it is better to use special connecting modules, already curved as you need. If the module with a bend of the desired value is not on sale, you can purchase special rotary elements that have a marking for cutting. Choose the desired value and saw off the model with a hacksaw.

cornices, stretch, ceiling, correctly

Decorative cornice

With such products, everything is both simpler and more complicated. The need to saw them off, most often occurs when two parts are connected at the joints of the neighboring walls of the room. It is very important to do it on the cut line very importantly here. To achieve this, as a rule, one was not enough. Will have to tinker with marking and cutting.

Attach one of the parts to the ceiling as it will be attached. Dish with a pencil at the floor of an even fishing line for a trimmer on the outer side of the part. Repeat the procedure by applying the cornice from the other side. Crossing from drawn lines is formed at the overlap.

Further, applying the details alternately, each for its part, transfer the point formed by the crosshair to them.

Draw a fishing line for a trimmer to each detail connecting this point and its opposite angle. On the intended line and carefully cut or drink the part, and then repeat the data of the operation with the second element. After such pruning, they will coincide almost perfectly, even if the joint of the walls is uneven.

If all the walls in your house or apartment are not even and special fitting elements are not required, then you can use the already familiar tool. stupid. By inserting the cornice with the side that will be facing the flooring, place it so that the long side remains to the left of you. Press it to the near lateral wall of the device and drink it with a hacksaw inserted into the groove with a mark of forty.five degrees.

This is how the left side will turn out. To make a cut for the right segment, it is necessary to repeat all the operations described above, but the cut element must be placed in a long part to the right of you.

Installation of the cornice on a stretch ceiling

Ceiling cornice under the stretch ceiling is mounted in an open or hidden way. The first method is considered light and universal, but the second looks more aesthetically aesthetically aesthetically pleased.

Open way

Hanging a cornice with an open method is considered a task that is not difficult even for an unprepared master. The ceiling film itself is not intended for attaching heavy elements to it, since the material is easily torn and damaged. Therefore, the base on which the console needs to be hung is placed on the ceiling (then it will be blocked by a film).

It is important to start the installation of an open cornice before fastening the ceiling canvas.

  • To do this, it is important to determine the installation site of the structure and fix the fixing profile for fastening the canvas in this place.
  • Then it is necessary to mark the fishing line for the trimmer under the window and lay the wooden bars. It is important to process wood with special antiseptics before installing the structure.

This will protect from the rotting of wood caused by lack of air due to the density of the ceiling cloth. It is best to treat the bars at least 2 times with liquids intended for deep penetration into the surface.

  • The most important point in the installation process is the consolidation of bars made of wood along the lines marked under the window. At this stage, it is advisable to apply a hydraulic level that does not allow the attachment base to shift.
  • After that, they begin the direct mounting of the cornice. If the base is made of wood, in order to attach the cornice to the ceiling, there will be enough screws. If the cornice is mounted on a brick or concrete, you need dowels. Tip: The connection acquires the necessary rigidity if it consists of a plastic dummy and a self.tapping screw with a slightly smaller section.
  • After that, the polyvinyl chloride film is fixed. This is done through the canvas using self.tapping screws. When performing work, it is important not to damage the moody and thin material, and the edges of the film are strengthened with a ring made of polymer material.

Installation recommendation: The beam for fastening should ideally be located close to the canvas, for this, special mounting wedges are used. This is done if the thickness of the beam is not enough, since it should be equal to the gap between the stretch ceiling and the base.

After all the stages are performed, the ceiling cornice is directed on the stretch ceiling.

Hidden way

Fasten the ceiling cornice to the stretch ceiling in hidden grooves is difficult, but it is quite possible. This installation method creates the illusion of flowing tissue, gives an atmosphere of airiness.The work is considered complex and requiring attention and skills, but in the end the customer receives a harmonious textile composition in which the fabric seems to be smoothly “draining” from the ceiling.

The stages of installation are necessarily performed before the ceiling cornice for suspended ceilings is finally fixed.

The work begins with the installation of the ceiling bar to the ceiling using dowels (with metal or plastic sleeves). Near it (at a distance of several millimeters), a base of metal or wooden beams is mounted, which serves as the basis for fastening the ceiling profile. In no case should you lose sight of the moment with pre.treatment of the tree with an antiseptic.

In other words, in order to hang the curtains on the ceiling cornice with a hidden method, you need to fix the product directly in the capital ceiling, and fix the film in a special niche in front of the console.Important: the profile is fixed from the console. This allows you to make it invisible, since the ceiling cloth overlaps the bar.

Designers say that it is advisable to hang a cornice for curtains in the case of a glossy ceiling canvas: a light and aesthetic composition is obtained.

Light Weight DIY Crown Molding YOU Can Install Alone!

Cautions

If it is decided to hang the cornice yourself, it is recommended to take into account all the risks. Stretch ceilings and cornices are normally adjacent, complementing each other, but the film is a delicate and moody material, and consoles often have sharp edges or notch, especially if made of aluminum or plastic.

Tip: In order not to hook the ceiling fabric in the process and not spoil the expensive stretch material, it is recommended to close the edges of the tire with a soft cloth or plugs.

Ideally, so that in the technological holes made in the film, dangerous tears are not obtained, they are strengthened with the help of a thermokoles made of plastic. If this is not possible, the holes are not cut, but burned, as if stolding the edges.

It is better that the same company is engaged in the installation of the console and ceilings: this will protect from the troubles associated with the possible damage to the canvas.

You can install a cornice on the ceiling yourself or using the services of specialized workshops. The main thing that should not be forgotten about is caution in the process!