How To Cut Plastic Skirting Boards On The Ceiling

How to glue skirting boards to the ceiling in the corners. A step by step guide How to glue skirting boards to the ceiling in the corners: how to glue fillets, how to glue the ceiling skirting board correctly, how to cut

How to glue skirting boards to the ceiling in the corners. Step by step guide

When performing repair and finishing work, each stage should be treated responsibly. The final stage, when additional and decorative elements are mounted, requires special care. Most often they are in plain sight, so any mistake can spoil the appearance of the entire interior. Therefore, it is necessary to strive for the perfect execution of the final stages of repair and decoration.

The completion of any work on finishing the ceiling is the installation of ceiling skirting boards, which are called friezes or fillets. Thanks to this element, the transition between the ceiling and the wall becomes smooth, and the renovation takes on a complete look.

how to cut plastic skirting boards on the ceiling

Preparatory process

Before gluing the skirting boards to the ceiling in the corners, you need to prepare the tools that will be needed when gluing the ceiling skirting board:

  • To calculate the required amount of materials, you need a tape measure.
  • It is recommended to fix the ceiling skirting boards with quick-drying glue or putty.
  • You can mix the adhesive in a previously prepared container; it is best to apply the putty with a spatula.
  • Remove excess glue or putty with a dry, clean cloth.
  • It is best to use a miter box to cut skirting boards at a certain angle.
  • Direct cutting of products is performed with a sharp construction knife or file.

It is recommended to glue the ceiling plinth on a pre-filled and leveled wall. As for the wallpaper, they are glued after the fillets are installed. In this case, the fastening of the elements will be more durable. In addition, when gluing new wallpaper, there is no need to change the ceiling plinth, since wallpaper strips are glued along the lower edge of the fillet. Fixing over wallpaper reduces the fixing strength of the skirting board and requires its dismantling when changing the finishing material for the walls.

The problem of how to properly glue the ceiling plinth in the corners is recommended to be solved with the help of acrylic or silicone glue, characterized by fast drying, or on a construction putty. With the help of a putty, the skirting board is glued directly to the wall, the frieze is glued to the wallpaper with the help of quick-drying glue. When using these materials for fixing products, there is no need to hold the elements for a long time to set the adhesive backing. In addition, the putty can simultaneously repair wall defects in the form of irregularities and cracks.

Main stages

Installation of a ceiling plinth cannot be called a difficult and time-consuming process; even a novice master can do it. However, for a quality work, you need to know all the details of installing ceiling plinths. When solving this issue, you should be especially careful about the design of the corners. Errors and shortcomings at this stage cause the formation of cracks and mismatches, which to a greater extent spoil the appearance of the entire ceiling. Therefore, the problem of how to stick the ceiling plinth in the corners can be called actual.

READ  How To Cut Corners Of Skirting Boards

How to trim a ceiling plinth using a miter box template

Something resembling a miter box can be done by applying the required cut angles to paper, cardboard or wood. Draw two parallel mowing lines, locate the center, and then set the required angles using a protractor. The advantage of this method is that you can postpone any angle, including more than 90 degrees. Of course, before cutting the corners of the ceiling plinth, you must first check the angle between the walls with a corner and measure it with a protractor.

The technique for cutting a ceiling plinth using a painted miter box is exactly the same as using the miter box itself. We press the plinth plank to one of the parallel lines, then set the hacksaw at the desired angle, which is already outlined, and cut it off.

Ceilings

The ceiling plinth performs not only a decorative function, visually separating the walls from the ceiling, but can also hide the joints of various finishing materials of the ceiling and walls. Not every interior design involves the use of a skirting board, but more often than not, the overall appearance of the room seems incomplete without it. There is nothing difficult in attaching this element. Fillets. Almost all types of skirting boards are attached with glue. But the question of how to properly cut the ceiling plinth in the corners of the premises can confuse many. Indeed, even in the simplest room there are internal corners, where the plinths of the ceiling plinth must be precisely and beautifully docked. And in a more complex configuration of the room, you will also have to dock the skirting boards, performing the outer corner. In this article, we will look at various options for how to cut a ceiling plinth with and without tools at hand.

First, you need to figure out how to cut the ceiling plinth, the answer to it depends on the material from which the fillet is made. At the moment, we sell ceiling skirting boards made of polyvinyl chloride (PVC), expanded polystyrene (foam), polyurethane and wood.

Pvc ceiling skirting boards are the cheapest. They are easily dents and creases that cannot be repaired, so the product must be thrown away. Also their disadvantage is electrostaticity. The ability to attract dust. You can cut them with a sharp construction knife or a hacksaw.

Styrofoam ceiling skirting boards are also cheap. This material is very fragile, it crumbles easily during processing, therefore, it is necessary to cut the expanded polystyrene with a sharp knife or a hacksaw on metal, without making too strong pressing forces.

Extruded polystyrene foam ceiling skirting boards slightly more expensive than expanded polystyrene, denser and more difficult to cut. However, they crumble less, making them easier and more comfortable to work with. They are cut with a construction knife and a hacksaw for metal.

Polyurethane ceiling skirting boards are the most expensive at the moment. They are durable, elastic and moisture resistant, easily cut with a construction knife and do not crumble. The disadvantage of polyurethane skirting boards is their dependence on temperature changes. For example, over a gas stove, a polyurethane skirting board will permanently deform and begin to crackle slightly. If you try to process or cut such a plinth, it may bend or deform in other ways.

READ  How To Cut The Outer Corner Of A Ceiling Plinth

Wooden ceiling plinths are dense, heavy products that can only be cut with a hacksaw, preferably with small, frequent teeth. You can also use a cloth for metal.

Before proceeding to the enumeration of the ways of how to properly cut the ceiling plinth, I would like to note that there is a possibility not to cut the plinth with great precision. Available for sale special corner pieces, into which the edges of the skirting board are inserted. In this case, it is enough to cut the plinth strip at an angle of 90 °, and the corner element will hide all the flaws. But this method is not always used, since the dimensions of the corner elements are slightly larger than the baseboards themselves, so the corners in the room will stand out against the general background. Sometimes it can look bulky. However, if the design of the room allows the use of corner pieces for ceiling skirting boards, it makes sense to use them. Further instructions will come in handy for those who nevertheless decided to accurately cut the skirting boards at a given angle.

How to cut a corner of a ceiling plinth using a miter box

The miter box is a simple carpentry tool that allows you to cut the workpiece at the desired angle. Most often it is a tray made of plastic, wood or metal with vertical slots for cutting at an angle of 90 ° and 45 °. There are also more complex miter box designs. For cutting at angles of 90, 60 and 45 degrees. For more professional work, a miter box with a swivel mechanism is used, where the hacksaw can be fixed at any angle to the workpiece.

How to cut a skirting board with a miter box. Inner corner:

  • We apply the plinth to the ceiling, measure the required length.
  • Then we install the plinth plinth in the miter box so that the position coincides with the position of the plinth on the ceiling.
  • The plinth strip should be pressed against the far wall of the miter box.
  • We hold the plinth with your left hand.
  • We choose such a position of the hacksaw when the angle is 45 degrees and the handle of the hacksaw is as close as possible to the left hand.
  • We cut the workpiece without making excessive pressure on the saw.
  • The next step is to trim the plinth striker. We also install it to the far wall of the miter box.
  • Press and hold with your right hand.
  • We choose such a position for the hacksaw when the angle is 45 degrees and the handle of the hacksaw approaches the right hand.
  • Cut off the skirting board.

Next, we join the trimmed plinths and check the cutting accuracy. For a more accurate orientation, they also say that to complete the inner corner, it is necessary to start cutting from the front of the skirting board. Wooden skirting boards will most likely need to be filed after trimming.

How to cut a ceiling plinth with a miter box. Outside corner:

  • In order not to be mistaken with the dimensions, it is better to start by marking the inner corner, and then cut out the outer corner. Otherwise, a situation is possible when the planks may not be enough in length.
  • It is necessary to attach the plank to the ceiling and outline the dimensions.
  • Install the plinth strip and press it against the nearest wall.
  • Hold it with your left hand and choose a position for the hacksaw at an angle of 45 degrees, when the handle approaches the left hand.
  • We cut off the workpiece.
  • We install the striker to the nearest wall, hold it with the right hand.
  • We set the hacksaw at a 45 degree angle when the handle approaches the right hand.
  • We cut off the workpiece and join the corner.
READ  How to Make a Hole In a Wall Puncher

Trimming the workpiece with a miter box is only suitable if the angle between the walls is even. 90 degrees. If the accuracy is poor, you will have to use other methods.

What is it made of and what is it called

The very first skirting boards on the ceiling were made of plaster. They were cast in special molds and then installed on the ceiling with mortar. Such figured decorations were called fillets. Today you can rarely see them: they are expensive, and outwardly they are almost indistinguishable from the cheaper options. And the name is almost lost.

The most popular ceiling skirting boards are made of polyurethane or polystyrene. They are inexpensive, look great, easy to install, have a wide range of profiles and patterns. The width can be from 5 mm to 250 mm. They are used in almost any room, decorated in any style. The exception is wooden houses with a corresponding interior. Wooden products are most often used here. The style dictates its own conditions.

There is also a similar plastic finish. It is mainly installed in bathrooms. But even in damp rooms, you can safely mount polyurethane strips. They are not afraid of dampness.

You need to cut the ceiling plinth in the corners of any material in one of the ways described below. The only exception is plastic skirting boards: you can arrange such a corner only using ready-made corners.

What and how to cut

Working with skirting boards made from different materials means using different cutting tools. When working with a wooden skirting board, it is more convenient to work with a saw on wood. All others, including plastic ones, made of polystyrene and other polymers, are better cut with a blade for metal. The result is a smoother cut, less burr. Saws are usually used when working with a miter box.

Corner design looks attractive

When working with polystyrene skirting boards, they cut them with a good stationery knife without special devices. Its blade is quite thin and even, the cut is smooth, not wrinkled. If you work with a saw with polyurethane or polystyrene, do not press hard: you can wrinkle.

In general, to get used to the tool and material a little, take a piece and practice on it: cut, saw, trim. So there will be fewer problems when working.

With decorative corners

There is one more, simpler way. For skirting boards made of polyurethane or polystyrene, use ready-made, factory decorative corners. They are installed in a corner, strips are glued to them closely. It is very simple to cut them if necessary: ​​by a few millimeters with an ordinary clerical knife.

Examples of finished fillet corners