How to distinguish a Bosch punch from Chinese.

How to distinguish a fake Bosch peorator from the original

The user convinced about reliability in the work of Bosch peorators. Various construction forums give users’ opinions about the high characteristics of Bosch peorators, their operational reliability and amenities.

Bosch peorators are equipped with a dust removal system, a stabilizer of rotation of the shaft, a rail restriction on the drilling depth, a “smooth start” system, a rotation speed regulator, anti.vibrational devices, and protection devices from overheating. This all applies to the original structures of the Bosch 2-20, 2-24, 2-26 peorators.

But not everyone knows that, along with the originals, I exist and fakes. This fully applies to Bosch peorators. And how to distinguish a real peorator from a fake or instrument of Chinese.made?

A few words about Chinese peorators of famous brands at once. Chinese peorators produced under the license or at China factories belonging to Bosch (Dremel, Rotozip, Skil) are no different in quality from Bosch peorators produced in Germany.

Real Bosch

Recently, Western manufacturers have been trying to place their production in China. Differences in the Chinese and corporate peorator consists in the system for acceptance of the finished product. For Bosch peorators made in China for Western Europe, there are two stages of control: factory acceptance and acceptance already in the country-buyer. Chinese peorators sent to Western Europe undergo factory acceptance, and upon arrival in the customer country, are also checked there using input control. The remaining pedorators who have not passed the factory control at China factories are sent to third countries. But they are made of the same details, on the same lines, the hands of the same workers. And cost 4-5 times cheaper. The quality is no different.

Professional Bosch

When buying any tool, first of all, pay your attention to the appearance.

Remember the golden rule: if the appearance of the case or the Bosch peorator differs from the original, there cannot be a corporate instrument inside.

Classification of Bosch oorators

Bosch peorators are conditionally divided into professional and household. Household peorators weigh much less professional at a power up to 900 watts. Of the shortcomings of household peorators, we highlight the poor cooling of the electric motor and high return when hit.

The advantages of Bosch professional peorators include:

• high power;
• engine cooling efficiency;
• the presence of vibration damping devices;
• Long operation.

Of the shortcomings, two main ones should be noted: high and large weight.

Additional handle

On the original additional handle on both sides there is Bosch casting.

There is no Bosch inscription on the additional handle on an additional handle.

Removable cartridge

As a rule, fakes are equipped with ordinary plastic, Chinese removable cartridges. However, if you saw a metal cartridge, this is not a sign that the original is before you. Metal cartridges are sometimes found in fakes. The main thing is to pay attention to which company ammunition.

The cartridge in the original Bosch GBH 2-26 should be Röhm.

How much does a screwdriver cost Dewalt?

What products cannot eat with kidney inflammation? What products can not eat at all? What products do you need to eat to establish a chair? What products do you need to eat to cleanse the skin of the face? What products should be eaten for skin elasticity? What programs are there to move to Canada? What straits are there in the oceans? What industries are? What industrial enterprises are there in which avenues are there in St. Petersburg St?

Manufacturers of counterfeit products want to earn as much as possible, so they try to fake the tools of world famous brands, such as Milwaukee, Makita, Bosch, Hitachi, Husqvarna.

But recently, the handicraftsmen began to fake and not very expensive tools and Interskol. Dewalt tools are for some reason fake less often. From the fakes of the Makita tool, you can run into the grinding of 9069 and the HR2450 grind.

From the “Fiolent” “craftsmen” liked the electric jigsaw MP4-700E, and from the lineup “Intercy”-the D-350er drill. There are many examples of falsification of existing original samples. But the artisanal workshops went further and began to produce tools that have no analogues in the model range of respected manufacturers. The marking of such models is also invented, so the vigilant buyer can check the model code on the manufacturer’s website and avoid buying counterfeit products.

In addition to the tool itself, consumables are often faked, for example, saw canvases and grinding circles.

It is clear that poor.quality grinding circle or saw disk can cause injuries.

What is the difference between DMRV 037 and 116?

The service life is at least 3 thousand hours; Unlike model 116, the new DMRV 037 during calculations can issue an error, which is 2.5 percent (both in the smaller and in the larger direction).

Where to turn on the macros? Where to enable SMTP? Where is the Lacedra fish? Where Kolchak fought in the civil war? Where Vlasov fought? Where to restore the registration of public services? Where graphic designers are in demand? Where the polarized light occurs? Where landslides arise? Where the concept of philosophy arose?

How to avoid fakes

In order not to fall for a fake, you must adhere to several recommendations: do not buy a power tool from your hands, in online stores, in the markets; Blue for a low price, a high.quality tool cannot be cheap; Buy only in specialized stores of power tools with the execution of all warranty documents

Do not be gullible, do not give in to simple tricks, do not chase cheapness.

How to distinguish the Bosch Poosch Original from a fake

Hello, dear friends! Today I’ll talk about how to distinguish the Bosch peorator original from a fake, and also not to become a victim of scammers.

The number of counterfeit tools is growing rapidly. There are more and more on the market. Bosch cannot close underground production. But there is an opportunity to teach customers to distinguish genuine devices from copies.

There is no need to talk about the problems of fake peorators. This is low quality, poor reliability, as well as a short service life.

How to not buy a fake when choosing a Bosch peorator

The user convinced about reliability in the work of Bosch peorators. Various construction forums give users’ opinions about the high characteristics of Bosch peorators, their operational reliability and amenities.

Bosch peorators are equipped with a dust removal system, a stabilizer of rotation of the shaft, a rail restriction on the drilling depth, a “smooth start” system, a rotation speed regulator, anti.vibrational devices, and protection devices from overheating. This all applies to the original structures of the Bosch 2-20, 2-24, 2-26 peorators.

But not everyone knows that, along with the originals, I exist and fakes. This fully applies to Bosch peorators. And how to distinguish a real peorator from a fake or instrument of Chinese.made?

A few words about Chinese peorators of famous brands at once. Chinese peorators produced under the license or at China factories belonging to Bosch (Dremel, Rotozip, Skil) are no different in quality from Bosch peorators produced in Germany.

Real Bosch

Recently, Western manufacturers have been trying to place their production in China. Differences in the Chinese and corporate peorator consists in the system for acceptance of the finished product. For Bosch peorators made in China for Western Europe, there are two stages of control: factory acceptance and acceptance already in the country-buyer. Chinese peorators sent to Western Europe undergo factory acceptance, and upon arrival in the customer country, are also checked there using input control. The remaining pedorators who have not passed the factory control at China factories are sent to third countries. But they are made of the same details, on the same lines, the hands of the same workers. And cost 4-5 times cheaper. The quality is no different.

Professional Bosch

When buying any tool, first of all, pay your attention to the appearance.

Remember the golden rule: if the appearance of the case or the Bosch peorator differs from the original, there cannot be a corporate instrument inside.

Classification of Bosch oorators

Bosch peorators are conditionally divided into professional and household. Household peorators weigh much less professional at a power up to 900 watts. Of the shortcomings of household peorators, we highlight the poor cooling of the electric motor and high return when hit.

The advantages of Bosch professional peorators include:

• high power;
• engine cooling efficiency;
• the presence of vibration damping devices;
• Long operation.

Of the shortcomings, two main ones should be noted: high and large weight.

How to distinguish Makita Peorator from a fake

You can determine the fake of the Makita infantry by a simple external inspection. In this case, you need to pay attention to the following points:

• The factory suitcase has wound inscriptions on the top cover and fasteners. The side of the marking is glued to the side. The fake case has no inscriptions on the latches, and on the lid you can see a glued logo that easily ripens off with a fingernail.
• The letters are clear, all these models are indicated.
• The original tool has a lace of at least 3 meters long, the kit includes a spare cartridge.
• The inscription is convex on the starter cover, and on the rotor. pressed.
• The Makita logo was squeezed out at the gearbox.

Pay attention to the color of the stator. In the original tool, it is severely blue, and in linden ones it is more green.

How to distinguish the Hitachi Peorator from a fake

The original Hitachi Peotor has the following distinctive characteristics:

• The surface of the case is smooth, the lid is high and tightly adjacent, when closing it there are no cracks or gaps. The bottom of the suitcase is figure.
• On the back of the cover there are rubberized inserts designed to fix the tool.
• The factory suitcase has a white Hitachi inscription applied by embossing or pressing.
• On the case of the penetrator and an additional handle, cast inscriptions. There are no irregularities, burrs.
• The length of the network cable is at least 3 meters.

If at least one of the criteria does not meet, then we can say that you have a fake in front of you. Fake power tools of famous brands are somewhat cheaper, however, by purchasing a fake tool, you deprive yourself of the possibility of long and convenient use of the tool, as well as warranty and post.warranty service. In order to avoid such problems, it is better to study the proposed product in detail and make sure its originality.

Classification of Bosch oorators

Bosch peorators are conditionally divided into professional and household. Household peorators weigh much less professional at a power up to 900 watts. Of the shortcomings of household peorators, we highlight the poor cooling of the electric motor and high return when hit.

The advantages of Bosch professional peorators include:

• high power;
• engine cooling efficiency;
• the presence of vibration damping devices;
• Long operation.

Of the shortcomings, two main ones should be noted: high and large weight.

How to determine the fake of the Bosch peorator

In appearance, you can easily determine whether falsification in front of you or the original. You need to start acquaintance with Bosch peorators by examining the suitcase (case), in which the tool is laid.

Determining the fake by the appearance of the case for transporting Bosch peorators

Inspecting the appearance of the suitcase for transporting Bosch peorators, pay special attention to inscriptions, various nameplates, latches, quality of casting.

When examining the appearance of the suitcase for storing and transporting the tool, pay special attention to the latches. The inscription Bosch should be printed on them. The fakes of the Bosch peorators have no such inscription on the latches.

When inspecting the suitcase, pay attention to the size of the gaps between the closing lids. There should be no gaps, or minimal gaps around the perimeter should be the same everywhere. At the fakes, the lids are adjacent, with distortion. On the lids you can see the blocking of casting, burrs.

Pay attention to the branded inscription applied to the suitcase. The ryginal suitcase has a sign and convex inscription, made by castings, the so-called 3D signs. At the suitcase, the inscriptions are pasted and easily ripped off with a fingernail.

In fake peorators, a special sticker with various codes, inscriptions and ciphers is glued on the back of the suitcase. Do not pay any attention to it.

It is designed to distract your attention from fake. The original has such a sticker is simply absent. On the back of the original suitcase, the inscription Bosch and the signature sign are checked. There are no such squeezed inscriptions on the fake.

To distinguish the fake of the Bosch infantry survey from the original, you need to buy a power tool in specialized stores with the execution of all the necessary documents.

Determining the fake by the appearance of the Bosch Peorators Corps

On the original case, all inscriptions and icons are applied by squeezing out. The inscription is either glued on the fake of the peorator on the film or each letter is glued. These inscriptions and letters easily rip off when picking with a fingernail. The original is impossible in principle.

There are Bosch 2-24 peorators, in which the case is blue. As a rule, these are peorators produced in Europe. They most often become the subject of fake. The fake is immediately visible incorrectly applied inscription. Instead of the inscription Bosch 2-24, a set of letters and numbers is glued on a fake, at the first glance resembling the inscription of the original.

Well, the last. On the Bosch factor of the factory manufacture, the inscriptions are applied or squeezing out. At the fake of the Bosch inscription, the inscriptions are glued on self.adhesive.

These are the main characteristics of fakes determined by the appearance of the power tool.

And how to distinguish the original Makita peorator from a fake?

Determine the fake of the Makita 2450, 2470 penetrator at external inspection. You just need to know what to especially pay attention to.

The low price of instruments of this class most often indicates for fake.

Makita peorators are not produced in the compositions of various sets.

Determination of fake during external inspection of the suitcase

The main differences begin when examining the appearance of the suitcase (case) for transporting and storing the Makita 2450, 2470 peorators, 2470.

The factory suitcase must have inscriptions made by embossing and having squeezed outs. In a fake case, the inscriptions are made in the form of a sticker or letters, manually glued. A fake inscription is easily destroyed by a fingernail.

On the latches of the original case, the names of the tool with embossing, squeezing out the instrument. The fake peorator has such inscriptions on latches, as a rule.

During external inspection of the case for storing and transporting the peorator, carefully inspect the gaps between the lids of the suitcase. In the original suitcase, the gaps are either absent or have the same gap around the entire perimeter of the contacts of parts.

Inspect the back of the case. On the case of the original, the inscription of the word makita is necessarily applied white in depressed letters. Fake cases of such inscriptions do not have.

Determination of the fake during the external inspection of the case of the Makita 2450, 2470

By external inspection of the tool case, you can easily distinguish a fake from the original. The fake of the stator body color is more blue, while the original has more green.

The name on the case of the Makita 2450 peorator is applied by the original method. On the cover of the stator, the inscription is convex, on the cover of the rotor the inscription pressed.

The fake Makita 2450 inscription on the green case is glued and easily removed using the nail. And the inscription on the black case is generally absent.

The fake can be determined and examined by carefully the side handle of the Makita 2450 peorator. On the handle of the original at the site of the pen of the handle, the inscription is applied by pressing the method. The fake has no inscription on the side handle.

With a careful external inspection, pay attention to the casting of the plastic parts of the penetrator. The fake has a poor.quality casting, with torn edges, with traces.

Take a closer look at the icons in the area of ​​the mode switch. The original icon has convex and neat. The fake is given by an uneven and torn inscription made with obvious defects.

In the original Makita 2470, the inscription was made by casting on the stator case and squeezing on the rotor housing.

The inscription on the fake Makita 2470 case is made in the form of a sticker or made separately glued letters. This is easy to detect by pushing the edge of the sticker or letter with a fingernail.

An additional handle of the original Makita 2470 peorator is applied to two inscriptions. One by casting method, the second by extrusion method. Fakes are available without inscriptions at all.

There are original modorators of the Makita 2450, 2470 peorators, in which the inscription is applied on the green housing of the rotor, but under it the inscription made by squeezing is hidden under it.

At the Makita-Original Peorator, two types of inscriptions have been applied on the lateral additional handle. One inscription made of white plastic, the second inscription is applied by pressing. The inscription made of white is performed separately by the method of casting and already, then painted white. In fakes, the inscriptions on the side handle are completely absent.

Makita peorators are found, in which a self.adhesive sticker is glued to the housing. But if you look closely, then under the sticker the inscription Makita, executed by pressing.

What you need to know so as not to buy a fake a makita peorator?

In order not to run into dishonest sellers and not buy a fake, we must familiarize yourself with our recommendations.

We recommend that you purchase power tools of popular brands in specialized stores that provide, upon purchase, all the necessary warranty documents.

We do not recommend buying instruments of well.known companies. They do not produce such products. The sets most often include angular grinder, a peorator or drill and lobby and at the same time costs cheaply.

We do not recommend chasing cheapness! The low price of the tool should give you the idea of ​​whether it is a fake in front of you. Cheap, does not mean, high quality.

Makita factory peorators are most often equipped with cases for storage and transportation.

On external examination, you can detect the main defects that say that you have a fake. If external defects are found, do not try to hope that the factory.manufacturing peorator is inside.

How to distinguish a fake from the original of the Makita 2450 peorator

The user convinced about reliability in the work of Bosch peorators. Various construction forums lead to users about.

Peorators are called drilling devices designed for drilling and exposing holes in particularly durable materials. In the orator.

The most widespread among professional builders were Bosch peorators, and among lovers, household models Bosch 2-20, 2-24, 2-26.

Which power tool is most often faked?

Construction specialists often use Bosch brand tools. High.quality technical characteristics and high price of products of this trademark have become the basis for creating falsifications. Professional power tool is often the object of fakes. The most common falsifications of drifts, pea, milling mills, universal cutters and saw discs, since this power tool is in high demand. Create fakes not only by handmade, but also some foreign manufacturers who deliver not certified goods illegally.

The non-original Bosch GBH 2-26 DFR peorator was easily exposed by experienced customers. The first thing that caught my eye is an unsuccessful copy of the design. In the corporate product, the name of the brand is spilled on the case and is represented by convex letters.

The manufacturer of fakes was limited only to a cheap sticker. The case of the infantry is made with inaccuracies, which are presented in the form of a heterogeneous structure of plastic with the presence of burrs and surfaces in the joints.

Drinks, peorators and disk saws have a rubber handle, which reduces vibration levels and improves the ergonomic of the tool. In fake copies, rubber inserts are replaced by plastic. The non.original Bosch GSB 13 Re was made in a different color scheme. The tool case should be blue-black, and the falsifier is made in blue-blue tones. The color of the case in the fake turned out to be green, instead of a blue original, and the cable had a pungent smell of rubber.

How to distinguish fake products from the original?

Many fake manufacturers strive to achieve absolute external similarity

Therefore, it is necessary to show attention in the little things. The main differences between the branded power tool and replica:

Having examined the documents for the power tool, pay attention to the warranty ticket. It must be printed in A-4 format in Russian indicating the brand of the product and contacts of service centers.

All Bosch brand products have a product code consisting of a ten.digit number. Having checked it with a number on the site by ordering original products, you can determine what kind of tool is in front of you. To do this, you need to drive the model identifier. If such a number is not in the catalog, then this will be a reason to think about buying such a power tool.

Brand logo and handles of branded devices are marked. The original product has uniform gaps in the joints. Fake is characterized by large slots and low coloring quality. Case for tools flimsy, made of cheap plastic. In the original suitcase, the release date is knocked out inside and there are special clamps where the warranty card and instructions should be placed. The case cover should close tightly and not have a zabrin.

The price of counterfeit goods is more attractive to buyers. Caution belong to discounts and promotions on professional tools. Especially if they are sold in sets such as a drill and a jigsaw. Bosch does not produce such sets.

The original technique uses double insulation engines, and in the falsification it is single.layer, which can lead to electric shock. In addition to the tool, consumables are faked, such as grinding circles and saw canvases that can injure a person. Remember that saved money can cost not only health, but also life.