How To Fill A Fishing Line In A Trimmer Video

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that you can use this technique in places where a regular lawn mower will simply not be able to get because of its massiveness. It is necessary to understand in more detail what kind of trimmers are, and how to choose the best option for a particular summer cottage.

What is a trimmer?

The basis of this equipment is the following elements:

• An engine whose main function is the rotation of the cutting head at the end of the rod;
• Directly the head, consisting of a coil on which either a fishing line or a knife can be wound;
• Knives or fishing line rotating at high speed, which are the main cutting part of the device, about how to charge the fishing line into the trimmer, we will go a little further.

An electric apparatus is inferior in power to a gasoline one, so it is ideal for working on a standard plot of land that adjoins a house with an electric energy source. The main positive aspects of this technique are the absence of noise during operation, light weight, ease of operation and, of course, environmental friendliness.

As for gas trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. It is not necessary to use electric energy at all, which has a positive effect on the functionality of such an apparatus. The cutting nozzles can be changed while working with the most diverse weeds of their type.

One of the most common attachments is fishing line, so you should dwell on this element in more detail.

Types of fishing line for trimmers

As a rule, the separation of fishing line is based on a different diameter of the samples, which can vary from 1.2 to 4 mm. The most commonly used material is with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

Here there is one main rule: the more power the device has, the thicker the fishing line should be.

This element can also differ in the type of its section. So, it can have a round (suitable for cutting simple grass) or square (for mowing a soft green cover) shape, sharp edges (tall grass) or it can be equipped with notches that are ideal for thin-diameter grass.

Do not forget that with the help of a fishing line it is allowed to mow exclusively grass, and for other, rougher vegetation, knives must be used.

Next, you should consider in more detail the process of how to insert the fishing line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

How to fill the line in the trimmer?

Any machine for mowing vegetation is necessarily equipped with a coil, which, in turn, may already differ for different models with a filing system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to fill the line into the trimmer.

In order to fill the fishing line into the trimmer, it is necessary to take at least 5 meters of material, which is then folded in half. The center of the cutting element must be inserted in a place specially designed for this, and then, using the visual tips on the reel that indicate the direction, the cutting device should be wound. At the end of all work, the cover, of course, will need to be tightened.

Fishing line adjustment

One of the main rules when replacing and adjusting equipment is that any manipulations with the mechanism should be carried out exclusively with the engine turned off and the plug of the device disconnected from the network.

Perhaps these tips will tell you how to fill the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the type of cutting material necessary for the type and, of course, determine the category of the most used trimmer.

To ensure that the area near the house always looks neat and tidy, you need to cut it regularly. Fortunately, modern technology allows us to solve this problem without excessive physical effort. Electric trimmers are so easy to control and care that even a teenager can mow the grass with their help. The main thing is to figure out first how to refill the fishing line in the trimmer.

How to charge a fishing line into a trimmer?

So, we are faced with the task of properly charging the fishing line into the trimmer. Let’s understand in more detail where to start its implementation and what pitfalls can await us in the process.

Step 1. Choose a fishing line

Step 2. Remove the coil from the trimmer

To perform this operation, the trimmer must be disconnected from the network and turned upside down with the working head. The further course of action depends on the trimmer model and the design of the coil itself:

• For small trimmers with a lower engine arrangement, press the keys located on the sides of the coil and remove its upper part from the head;
• On trimmers with a bent rod, hold the coil housing with one hand, while simultaneously turning the lamb on the housing;
• For trimmers with a direct boom and gearbox, insert a screwdriver into the hole located under the coil, and then turn the body of the coil counterclockwise.

Step 3. Disassemble the coil

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mowed plot, since there may be a spring inside the coil, which will be difficult to find in tall grass. After disassembly, we will have three parts on hand: a body (top cover), a protective casing and the coil itself.

Step 4. Measure the required amount of fishing line

Novice mowers are usually interested in how many meters of fishing line to wind onto the trimmer reel? There are two ways to resolve this issue:

1. Unwind a skein of fishing line on a flat, dry place and separate half from it.
2. Measure 3-4 meters of fishing line from the skein.

In any case, after the end of the winding, the turns of the fishing line should be on the body of the reel without sliding off it. No need to try to wind as much as possible, since the fishing line will be badly unwound and more often torn.

Step 5. Reel the line onto the reel

How to install the fishing line on the trimmer depends on the design of the coil. Consider the option when in the coil body there is one outlet under the fishing line. In this case, the end of the fishing line is clamped in the crevice of the reel, and then we wind the fishing line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After winding up on the reel, it is necessary to put on a protective casing and bring the end of the fishing line into it

If the reel is designed to work with two tails, then the fishing line must be folded in half and laid in a groove in the central part of the reel. Further winding will be carried out in one or two grooves, depending on the design of the coil. The winding direction should also be opposite to the direction of rotation of the coil. At the end of the ponytails, the fishing line will also need to be pulled into the holes on the top of the reel.

Many, having developed a factory line on a newly acquired trimmer, try to rewind a new one, but they cannot, because they do not know how to wind the line onto the reel spool (bobbin). It seems that there is an instruction, but it still doesn’t work out. Let’s try to deal with this issue in this article.

So, to rewind the fishing line, you need, for starters, to remove the reel from the trimmer. It will be more convenient. The removal method will depend on the type of trimmer.

Remove the coil from the trimmer

On small electric trimmers with the bottom position of the engine (when it is when working near the ground), the coil usually has two keys on its sides. We click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is taken out, on which the fishing line is directly wound. When parsing, be careful: there is a spring inside that can fly out and get lost.

On electric and petrol trimmers with a curved bar (it is still not possible to put a knife on such trimmers), you need to grab the coil body with one hand, and with the second hand you need to start turning the lamb on it. It is he who fastens the coil to the trimmer bar. Having unscrewed the lamb, carefully remove the entire coil, being careful not to lose the spring inside.

On electric and petrol trimmers with a straight rod and a gearbox at its end (in addition to fishing line, you can also install a knife on such trimmers) we look for a hole under the coil, insert a screwdriver into it, for example, rotate the coil quietly until the screwdriver penetrates even deeper, and the coil will lock. Now twist the entire coil clockwise (since the thread is left) and remove it from the trimmer. Then we disassemble the coil. It can be assembled using latches or twisted by a lamb. If the coil is on latches, then we press on the sides on the base of the latches so that they bend and release one half of the coil body from the other. We just twist the lamb. There may also be a third type of connection of two halves of such a coil: with it, you need to grab the lower part with one hand, and the upper one with the other, and start turning them in opposite directions. When disassembling such a coil, you must also make sure that the spring inside is not lost.

Than 200 types of trimmers in one place at the lowest prices. Click and see

Now, having removed and disassembled the coil, we proceed, in fact, to winding.

Winding process

If your coil is designed to work with only one antennae, then everything is simple. You need to rewind 2-4 m of fishing line (depending on the size of the reel), find the hole fixing the line on the inside of the reel, insert one end of the line there and start reeling the line in the direction opposite to the direction of rotation of the reel on the trimmer. On the inside of the reel, they usually indicate an arrow, in which direction to wind the line. After winding up the fishing line, we leave a small piece of it unwound to expose it. We fix this piece in a special groove located on the inside of the reel and designed so that the fishing line does not unwind at the time of collection of the reel. If there is no such groove, then you will have to hold the fishing line with your finger to prevent it from unwinding during the further collection of the reel. Next, we take the outer part of the reel and thread the outer piece of fishing line into the existing hole, collect and put the reel back on the trimmer.

If the coil is designed to work with two antennae, then do the following. On the inside of the reel, we see how many grooves are available for winding fishing line. There may be one or two. If there is one groove, then both antennae are wound along this same groove. If there are two grooves, then each antennae is wound on its own groove. The reel with one groove should have a through hole into which the line is threaded. Unwind 2-4 m of fishing line, thread it through this hole so that on each side of the fishing line sticks out equally. And at the same time we wind both antennae of the fishing line in the same direction, opposite to the direction of rotation of the coil on the trimmer and coinciding with the direction indicated by the arrow on the inside of the coil. We leave a little fishing line unwound, we fix the ends in special grooves, and if they are not there, hold them with our fingers. Pass both ends into the holes on the outer coil body. We assemble the coil and attach it to the trimmer.

If there are two grooves, we fold the piece of fishing line 2-4 m long in half, insert the loop obtained at the bend point into the groove between the two grooves, and simultaneously wind both ends of the fishing line in each groove. Further actions are similar to the previous option.

There are still reels in which the line is threaded through a through hole on the inside. After that, the ends of the fishing line, without winding, are threaded completely through the holes on the outer casing of the reel, the reel is assembled and the button, which is usually pressed, is rotated so that the line can be released during operation as it wears out. Turn the button. The line itself is wound inside. At the same time, turning it in the “wrong” direction will not work, since it can only spin in one direction. If you get used to it, then you can wind the line onto such a reel without even taking it apart. You just need to combine the through hole of the inner drum with the holes on the outer case of the reel, and then thread the line into them.

That’s all for the matter. Good winding!