How To Fill The Lawn Mower With Line
Filling the line into the trimmer The line feed system from the trimmer is manual, semi-automatic and automatic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30).
We fill the line in the trimmer.
I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space “How to fill the line in the trimmer.” Not many trimmer manufacturers answer this question in their instruction manuals. Therefore, it is difficult for simple gardeners to figure out how to do it correctly.
I want to start with a brief description of the technical characteristics of the trimmers.
So, trimmers are electric and gasoline. The cutting element for trimmers can be a line and a knife. The line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and 4 bladed knives. There are also plastic and metal knives.
The line feed system from the trimmer is manual, semi-automatic and automatic.
The development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the line and the number of knife blades, according to the power of the trimmers. Otherwise, the motor is overloaded, resulting in damage. And these are additional and significant costs.
Trimmers on the market today:
With one nozzle. Only a line.
With two nozzles. A fishing line and a three-four-blade knife.
With one nozzle. Only three to four bladed knife.
Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing line. But at the same time, they do not think about the safety of their own and their loved ones, because, like a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave him crippled for life. Using a fishing line can and gives a better effect, I have never personally tried it than a trimmer line, but such work has a number of inconveniences: when it comes into contact with hard objects, it loosens or can simply be pulled out of the reel without limit.
So, what is called closer to the topic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30). Everything is very simple. We started.
After you have chosen the line for refueling, you need to cut off the required amount of line, because all the line in the skein will not be wound into the reel.
Cut off and start winding.
Remove the coil and the protective cover from the coil.
They took it off. We fasten one end of the line into the gap and carefully and evenly wind the line.
The amount of line should be such that the protective cover of the reel closes and the line on the reel unwinds a little by itself.
We put the other end of the line into the hole in the protective casing.
Next, we take the coil and the protective cover of the coil. We squirt the end of the line from the reel into the metal hole on the protective cover of the reel. We tighten the line a little.
We put it all on the trimmer. Turn the coil clockwise until it clicks.
They fixed it. Now we connect the trimmer to the network. We put the trimmer in the starting position for work. We turn on the trimmer. Excessive line length will be cut with the trimmer blade.
Coil in trimmer
That’s all we start working.
Thick line
It is stored at the top of the trimmer body.
Material you can see
A little advice. Try not to let the line come into contact with hard objects when cutting. With this contact, the line will be cut. And since in this trimmer the line is not fed automatically, then every time you have to stop work, remove the reel and release the line again.
In addition to the standard lawn line, my trimmer has a thick line for cutting rough weeds. It has the shape of a pigtail, i.E. Three lines are tightly intertwined. This line has its own spool.
Material you can see
A little advice. Try not to let the line come into contact with hard objects when cutting. With this contact, the line will be cut. And since in this trimmer the line is not fed automatically, then every time you have to stop work, remove the reel and release the line again.
Spare coil storage space
It is very simple to install such a fishing line into the reel. According to the internal scheme inside the reel. We insert the center of the line with a metal mount in the upper part of the reel, and draw the ends of the line along the grooves and bring it out.
Safety engineering
To quickly and safely change the line on the reel of the mower, you must observe safety precautions. Before removing the reel to wind the line around the mower, the technician must be disconnected from the power supply (if the mower is powered by electricity). Here I would like to mention the reliability rating of electric lawn mowers, which will help you choose a safe helper.
Another important a safety rule that must be observed is pressing the lock button. You can find out its location on the vehicle body using the instruction manual. For example, you can find the operating instructions for the manual petrol lawn mower here.
Do not forget that the cutting element needs to be adjusted. There is an adjustment button on the body of the unit. If the process does not start automatically and the thread tension has loosened, then the button is clamped and the fishing line is pulled out of the spool with force.
See instructions.
How to fill a line in a lawn mower: how to change and load into a reel, how to change and how much to wind into a trimmer
When spring comes, people often spend their free time at their summer cottage. They try to rid their area of problems such as weeds and grass with the onset of warm days. It is difficult to do this manually, especially if the area is very large, so a lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds. It is a suitable device for mowing unnecessary plants near the fence, at home, between rows in the garden on a flower bed, and so on. Read about how to choose the right mower for your needs here. The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element. A spool. But over time, the line wears out and it becomes necessary to replace it. The article will talk about how to fill the line in a lawn mower.
Which line to choose to refuel the lawn mower
The thickness of the polyethylene thread depends on the model of equipment and varies from 1.2 to 4 mm. She may be:
- With a round section. This is the most durable material for mowing grassy plants;
- With a curly section. Used for mowing soft plants;
- Twisted. Used for thin grass;
- Professional type, not suitable for all models of equipment.
To change the line on a lawnmower, you need to purchase a cutting thread, which will be ideal for each type of mower.
How to change the line on a lawn mower: detailed instructions
In 1971, American entrepreneur George Bollas invented a lawn mower that used a line as a cutting knife. A lot of time has passed since then, the drive has become more powerful, a modern trimmer can easily damage the bark, so the idea itself has transformed into mowing grass around obstacles without damaging the mower cutter itself. For a neat cut around obstacles, a smaller line head can be used and is easy to change when moving from large areas to delicate mowing. However, the cutting tool itself needs to be replaced periodically. We will tell you how to disassemble the head of a lawn mower (trimmer) and wind new line.
Choosing a line for the trimmer head
There are many types of heads available to suit different types of line. The latter is also available in several diameters: from 1.0 mm to 3.2 mm. Over, its cross section is round (including with a special groove to reduce the noise level), square, twisted and in the shape of a star.
There are no clear preferences, this explains the wide variety of shapes and diameters on the market. The round shape is usually stronger, but has the worst cutting ability and also produces a characteristic sound when rotated. Therefore, sometimes an acoustic groove is made on it, however, the use of this fishing line makes sense only on battery trimmers, in cars with a gasoline engine and a network drive, the sound level of the drive itself practically drowns out the sound from the fishing line. The square has a good cutting ability, and despite the fact that this line is less strong than round, on average it is consumed less. Square fishing line quite easily cuts off the growth of the same willow up to 1 cm in diameter. The star has the maximum number of cutting edges, mows the best and is consumed the fastest.
The next nuance when choosing is rigidity. The fact is that during the production of nylon, a modifier (often maleic anhydride) is added to it, which improves its strength and prevents tearing. However, modifiers are not the cheapest component, they are trying to save on it. Therefore, a seemingly good line, which remained for the winter, unexpectedly behaves in a completely different way in the spring. It breaks, stops coming out of the reel normally. There is a recommendation to soak the fishing line in water before work, but I do not see much point in this, maleic anhydride interacts with water, but if it is not enough in nylon, then there will be nothing to interact with. Therefore, it makes no sense to stock up on fishing line for a long period of time, a breaking or constantly breaking line, which, moreover, does not want to leave the reel itself, can significantly complicate the work.
Lawnmower fishing line: how to choose and reel?
- How to choose the right line?
- Device in the mower
- How to rewind?
- Safety engineering
With the arrival of spring, summer cottages become the main residence of many of our compatriots. However, with the arrival of warm days, there is such a problem as fast-growing grass. It is inconvenient to constantly mow it with a hand scythe, and not all types of grass lend themselves to this old working tool. It is much more convenient to use modern lawn mowers for these purposes. Particularly popular among them are devices with a fishing line, which is easy to change if necessary.
In the model with one groove
The line must be pulled into the hole, and its mustache must be folded together and aligned.
Then winding is performed in the opposite direction to the rotation of the bobbin on the mower. Often there is an arrow inside the spool indicating how to put the line on correctly.
The ends of the string are fixed in special grooves or simply temporarily held by hands and pulled into the hole located on the outside of the bobbin.
After that, the spool is closed and attached to the rod, after which the mower is ready for work.
Version with two grooves
The line is first folded in half to determine where the middle of the fold is.
Further, the loop formed at the bend is threaded into the groove that is formed between the two grooves.
After that, you can wind both rods in a separate groove.
You can fix the mustache and assemble the coil completely in the same way as described above.
Opening a reel for the first time and winding a new line is not always easy. Over time, this procedure becomes almost automatic and will not take much time. Some reels have an automatic system that spins the line by itself. As a result, it remains only to correctly set the end of the line, and you’re done. In such models, the string must be put in the hole that is on the outside of the body. Further, the bobbin is assembled, and when the winding rotates, the fishing line is put on it.