How To Get Shavings From An Angle Grinder Out Of Your Eye

Getting a speck out of the eye at home. Useful tips If a speck has got into your eye, then find out how to get it out correctly without resorting to the help of doctors.

We take out the speck correctly!

On the Internet, you can find many tips on how to get a speck out of the eye, but no one gives an answer on how to do it right. Let’s turn to medical professionals. Ophthalmologists. For help and find out.

How to help a child

The most important thing is not to panic! Calm down the child, sit down so that it is convenient to carry out the procedure. Make the manipulations mentioned above: examine the eye for the detection and identification of a speck.

Try to remove the foreign body using methods that are appropriate for your situation. If the child is afraid, cries, does not give calmly to help, alternative medicine advises to use the “grandmother’s” remedy, lick the speck from the eye. However, doctors are skeptical about this method, since the human oral cavity contains a significant number of microorganisms.

Gently grab the baby’s head with your hands to fix it, spread your eyelids with your tongue and slide from the outer edge of the eye to the nose. Thus, lick the speck without causing the slightest harm. In most cases, this is the safest method of removing debris from the eyes of children when you are walking with your baby on the street and there are no tools at hand.

How to remove a speck from the eye of a baby or newborn

It is not uncommon for a foreign body to enter a child’s eye. If a speck has got into the baby’s eye, then first determine whether it moves freely along the surface of the eye. Wash your hands and pull back your baby’s lower eyelid. Then switch his attention to the object located above and examine carefully the entire surface of the eye.

If the speck moves, you can remove it yourself. Put boiled water at room temperature into the eye, this will help wash the item. For help, you can make gentle circular movements with your finger in the direction from the outer corner to the bridge of the nose. This will push the speck towards the tear duct. Here she can come out on her own or can be easily removed with a cotton swab. Then treat the eye with albucide or special ointment. These activities are enough.

What is absolutely forbidden to do?

There is a correct sequence of actions when this problem occurs. However, sometimes people do what is prohibited, and this can only aggravate the situation.

These are the following:

  1. Frequent blinking. This desire arises because the foreign body is tightly adhered to the eyelid. As a result, scratches of the epithelium are formed, conjunctivitis develops.
  2. Rubbing eyes with hands. It is important to prevent this, so as not to damage the mucous membrane.
  3. Squinting. Causes the chips from the angle grinder to penetrate even deeper, making it harder to reach.
  4. Rinsing the eyelid with running water at the site of the lesion. Shavings can scratch the eyelid.
  5. Drip aloe juice, honey and other substances into the eyes. These elements will cause irritation when exposed to shavings.
  6. Remove extraneous elements with a match or tongue.
READ  Which Disk to Cut Laminate Angle Grinder

It is almost impossible to get the shavings from the eyelid on your own, since it is located on the mucous membrane itself. In this case, only an ophthalmologist will solve the problem. In order not to permanently lose sight, a foreign object that has fallen out of the angle grinder must be removed as soon as possible. When first aid is provided out of time or physical factors are present, then damage to the lens, retina and vitreous body by chips from an angle grinder is possible.

Types of injuries and typical symptoms

The case when chips from a tool enter the eyelid is considered mechanical damage. The following types of injuries are distinguished by severity:

  • Easy. Vision does not disappear, no visible defects will make themselves felt;
  • Average. There is a slight external damage to the eyelid, vision is reduced, but not much;
  • Heavy. The eye practically does not see, structural defects appear.

After chips or crumbs from an angle grinder enter the eyelid, the following symptoms occur:

  • Increased tearing of the eyelid;
  • Pain in the area of ​​injury;
  • Redness of the eyelid;
  • Spontaneous closure of the eyelids due to shavings, it becomes very difficult to open them;
  • Impaired vision.

According to the above signs, it is impossible to reliably determine the degree of eye damage by chips from an angle grinder. This is done by an ophthalmologist using a special microscope. Similar signs make themselves felt after removing the chips from the tool, the only exception is the increased release of tears from the eyelid.

The reason for this is edema, especially if the chips have penetrated much deeper than the initial layer of the epithelium.

What to do at home if chips, sparks or chips from an angle grinder get into the eye?

During work with an angle grinder, due to carelessness, chips can get into the eye. You need to know how to properly provide yourself with first aid, so as not to lose your sight. In this article, we’ll show you what to do in such a situation.

  1. Types of injuries and typical symptoms
  2. What is absolutely forbidden to do?
  3. How to remove chips, chips or scale at home?
  4. What happens if help is not provided correctly?
  5. Conclusion

What to do if dross from an angle grinder gets in the eye?

By nature, our eyes are protected by eyelashes, but sometimes this protection is not enough. And various small particles get into the eyes. In many cases, it is almost impossible to protect yourself from this.

People often suffer and find themselves in such a situation because of the specifics of their profession. When working with an angle grinder, almost everyone has faced this problem.

And the eyes are an organ that needs to be protected. Any foreign matter should be removed from the eye as quickly as possible. One day is enough for toxic oxidation products of colored metal to enter into a chemical reaction with living tissue and eye fluids.

This should not be allowed, since the complications are very serious. You can go blind forever or lose an eye. Therefore, in a situation when chips from an angle grinder got into the hole, what should be done at home, it is very important to know.

Sometimes the victim manages to independently pull the foreign body out of the eye. But often the problem occurs during the workflow. And when dust and shavings fly in different directions, it is better to ask for help.

In any case, this situation requires the right action.. This will make it possible to avoid serious consequences and preserve vision.

How to get shavings out of your eye

If there is no way to quickly get to a medical facility, then you need to know what to do on your own if scale from an angle grinder has got into the eye. All procedures should be performed with clean hands.

READ  How to Check Anchor Angle Grinder Video

They should first be washed with soap under running water and not touching objects. Then follow these instructions:

  1. Rinse face thoroughly with eyes open.
  2. Try to locate the foreign body. For this one should take a mirror and gently pull back the lower eyelid. Sometimes the shavings get there. If present, remove it with a clean cotton swab previously moistened with water. You can also do this with the tip of a scarf.
  3. If nothing is found in the lower eyelid, then need to lift the upper eyelid. It is much harder to remove a speck from there. The procedure should be carried out very carefully. Strong pain sensations are possible. It is necessary to try to make it fall or completely fall out. To do this, take the upper eyelashes and twitch them a little.
  4. If the discomfort continues, then there is something left under the upper eyelid. You need to try to grab the top edge and turn it slightly outward. If there are chips in this place, pull them out with a cotton swab.
  5. In case the shavings are not stuck in the eye, you can collect warm boiled water in a small container and immerse your face there. In this position, try to blink a little. This removes a foreign body if it is on the surface of the eye and is not stuck in it. This is extremely rare, because metal shavings almost always stick to.
  6. An effective way to get shavings out of the eye at home is magnet application. It should be brought as close as possible to the open eye and moved back and forth.
  7. If the metal shavings are not visible in the mirror, then there is a chance that they came out, but scratched the cornea. Therefore, the person does not leave the feeling of discomfort. Then the affected eye must be dripped with antiseptic eye drops.. You can also apply a regenerating gel under the lower eyelid. Then close your eye and massage it with gentle, gentle movements.
  8. If during the extraction process the eyes rubbed heavily, you can rinse them with the remains of strong black tea. It contains tannins that relieve irritation. This procedure is available to everyone, since tea is always found in the house.
  9. If the shavings have sunk very deeply, it is better not to touch the eye and seek medical attention immediately. If possible, do not blink or touch the injured eye with your hands.

Consequences of improperly provided first aid for eye injuries

If it is incorrect to provide first aid for eye injuries, serious negative consequences can occur:

  1. Cicatricial deformity of the eyelids.
  2. Eyelash growth is wrong.
  3. It becomes impossible to fully open the damaged eye.
  4. Eyelids grow together.
  5. Narrowing or obstruction of the lacrimal passages.
  6. Corneal opacity, possible partial loss of vision.
  7. Dry eye syndrome.
  8. Lens clouding. Cataract.
  9. Chronic inflammation of the eye structures, resulting in gradual loss of vision.
  10. Glaucoma is an increase in intraocular pressure.
  11. Loss of an eye.
  12. The appearance of rust around metal shavings that have got on the eye structures.

How to get shavings out of your eye

If there is no way to quickly get to a medical facility, then you need to know what to do on your own if scale from an angle grinder has got into the eye. All procedures should be performed with clean hands.

They should first be washed with soap under running water and not touching objects. Then follow these instructions:

  1. Rinse face thoroughly with eyes open.
  2. Try to locate the foreign body. To do this, take a mirror and gently pull off the lower eyelid. Sometimes the shavings get there. If present, remove it with a clean cotton swab previously moistened with water. You can also do this with the tip of a scarf.
  3. If nothing is found in the lower eyelid, then the upper eyelid should be raised. It is much harder to remove a speck from there. The procedure should be carried out very carefully. Strong pain sensations are possible. It is necessary to try to make it fall or completely fall out. To do this, take the upper eyelashes and twitch them a little.
  4. If the discomfort continues, then there is something left under the upper eyelid. You need to try to grab the top edge and turn it slightly outward. If there are chips in this place, pull them out with a cotton swab.
  5. If the shavings are not stuck in the eye, you can take warm boiled water into a small container and immerse your face there. In this position, try to blink a little. This removes a foreign body if it is on the surface of the eye and is not stuck in it. This is extremely rare, because metal shavings almost always stick to.
  6. An effective way to get the shavings out of the eye at home is to use a magnet. It should be brought as close as possible to the open eye and moved back and forth.
  7. If the metal shavings are not visible in the mirror, then there is a chance that they came out, but scratched the cornea. Therefore, the person does not leave the feeling of discomfort. Then the affected eye must be dripped with antiseptic eye drops. You can also apply a regenerating gel under the lower eyelid. Then close your eye and massage it with gentle, gentle movements.
  8. If your eyes rub heavily during the extraction process, you can rinse them with the remains of strong black tea. It contains tannins that relieve irritation. This procedure is available to everyone, since tea is always found in the house.
  9. If the shavings have sunk very deeply, it is best not to touch your eye and seek immediate medical attention. If possible, do not blink or touch the injured eye with your hands.
READ  How to Check the Stator And Rotor Angle Grinder

Examination of the damaged eye

The doctor conducts diagnostic procedures in several stages:

  • Collecting anamnesis. This is data obtained from the words of the patient or his close relatives. Based on them, the doctor will suggest a diagnosis and prescribe a further examination.
  • General examination of the victim. The doctor evaluates the condition of the skin surfaces, mucous membranes of the eyes.
  • Lidocaine solution is instilled into the victim’s eyes, which eliminates pain. After the effect occurs, a person can open his eyes, the doctor will examine the damaged structures.
  • Examination of the fundus. The technique is necessary to detect damage to the internal structures of the eyes. For this, the patient is preliminarily instilled with a solution that disrupts the process of accommodation of the pupil for a while. The condition of the cornea, the camera of the eyes, lens, retina, microcirculation vessels are assessed.
  • Intravital microscopy. There is a special ophthalmological microscope, which is brought to the patient’s eyes, and the damaged surface is examined. With the help of the method, the doctor will reveal how deep the scale has penetrated into the corneal area. Check for the presence of infiltrates, immunological reactions.
  • Radiography. If the spark has hit deep inside the eye, it is necessary to find out in which area it is concentrated. This can be seen on X-ray examination.
  • Mri, CT. Methods are rarely used if the X-ray examination did not give accurate results.