How to grease the heb of the trimmer for Echo grass. Some reasons why trimmers for grass are not launched. video

Lubricant for a trimmer gearbox for grass. Than and how to lubricate?

Echo SRM-22GES SB. Universal lawn mower for unprofessional use, which is easy to handle, reliability and safety. This model will cope with the haircut of the lawn in small and medium sections. Due to its ergonomics and versatility, such an instrument. This is a good choice for owners of small country houses and summer residents.

A trimmer for Echo SRM-22GES SB grass is equipped with a two-stroke engine with a capacity of 0.9 l.With. and ES-START light launching system. Thanks to the function of lightweight launch, you do not need to make much effort in order to start work. The built.in primer (manual fuel pumping pump) also facilitates the launch of the motor. An increased translucent fuel tank is convenient to see the remainder of fuel and allows you to increase the interval between refueling.

Lubrication of shaft and gearbox on a benzokos.

On the Echo SRM 22ges SB there is the possibility of choosing a cutting tool: a trimmer cord or a cutting disk for grass. A three.blade knife is made of special steel, so the cutting edges remain sharp for a long time. Trimmer for grass is equipped with a semi.automatic mowing head. Safety provides a shock.resistant casing and protective glasses. A detachable shaft is installed on this model that makes the technique convenient for storage and transportation. For good controllability, the lawn mower is equipped with an ergonomic “bicycle” handle and a comfortable shoulder belt.

• A guarantee of the quality and originality of the technique, the company “Direct Hands”. The official dealer of the Echo brand in St. Petersburg and the Leningrad Region;
• Favorable price for benzenery and maintenance;
• pre.sale preparation of technology and briefing on safe handling it;
• “Straight arms”. Authorized service, we will carry out for you the warranty and post.warranty repair of the trimmer for Echo grass high.quality and on time.

Operating instructions for a trimmer for Echo SRM-22GES SB grass

800 for other areas of St. Petersburg within the Kad.

How to lubricate the gearbox of a trimmer for grass?

In the upper part of the case where the gearbox is installed, there is a technological hole, which when the trimmer for the grass is twisted by a screw. This screw is unscrewed, and 1.5. 2 ml of fat is injected into the hole with a nozzle on the tube. If the lubricant was purchased in another package, a regular disposable medical syringe is also suitable for this operation.

Read how to change oil in a motoring gearbox

After that, the screw is installed in its former place. This procedure, regardless of the user recommendations, must be carried out every 10. 15 hours of work of a trimmer for grass in working mode. Other reasons for the renewal or replacement of transmission oil are independent minor repair work (for example, cleaning and washing of the gearbox before the summer season), repair of the unit, storage of a trimmer for grass for winter, etc. D.

If the gearbox is disassembled, it is recommended to completely remove the remains of the previous oil from the surface of the parts, even if there are no traces of oxidation and pollution on it. How to lubricate a trimmer for grass or how to lubricate a gearbox with a gasoline trimmer. And only after that apply new oil. After applying the oil, it is recommended to turn the shaft several times manually and make sure that the oil is evenly distributed over all parts of the gearbox.

When lubricating, special attention is paid to the following elements:

• Flywheel: on its surface, as a rule, the remnants of the grass are intensively stick, and the condensing juice of grass creates additional resistance.
• The starting coil of the dog, which is in constant contact with the grooves on the flywheel when the drive is turned on. In this case, not only mechanical depreciation occurs, but also mechanical and chemical corrosion of the compound of the flywheel, since the materials for this pair are different (flywheel. Aluminum, dog-old).
• Bearings, if their seals are worn out and lubricated through them. How to lubricate a trimmer for grass-expert? 8 How to lubricate a gearbox of a trimmer for grass grease the gearbox. In this case, the device begins to vibrate greatly under load. This happens with trimmers of Chinese.made, so in the future you should think about replacing a bearing unit with a better, for example, from the Swedish company SKF.

The main malfunctions of the gearbox and ways to eliminate them

With a gearbox of an electric or gasoline trimmer for grass, various breakdowns occur. The most frequent of them are presented in the table further. There you can also find the reasons for their occurrence and methods of elimination.

Bearings are destroyed due to the use of inappropriate lubrication or due to its absence. Their damage is also caused by severe operating conditions of motorcycles and the ingress of extraneous particles of the material (for example, broken metal teeth of mechanical transmissions) due to the fact that the integrity of the anthers is violated.

To remove the bearing, you need to disassemble the gearbox and use a special puller. If it is not, then you can try to do it with a hammer with a mentor. In this case, work should be carefully so as not to damage the seat. Using the pre.heating method to shoot the bearing is not recommended. This is due to the fact that the metal may lose the required operational characteristics.

If the knife ceases to rotate under load or stands still, then this is accompanied by an uncharacteristic sound.

Most gearboxes can easily be eliminated with your own hands. Replaced details are recommended to purchase “relatives” designed for the used motorcosa.

Gear lubrication of a trimmer for grass

Lubrication of gears must be carried out regularly in accordance with the recommendations set forth in the operational instructions of the model used. You need to do this also if:

In addition to the gearbox, it is also necessary to regularly lubricate the shaft of a trimmer for grass. This is the norm of proper care of the device.

With the constant use of a trimmer for grass, its gear mechanism experiences a load from grass, dirt sticking on knives, or due to a change in torque. Lubricants must be selected high.quality to extend the service life of the gearbox.

Used types of lubrication

When choosing lubrication, it is necessary to take into account the following factors:

Famous manufacturers, for example, STIHL, Husqvarna and others, in addition to trimmers, produce lubrication for them. Such products not only reduces wear, but also protects the metal of gears from corrosion. Therefore, for motorcycle from these brands, it is better to use their lubricants.

If the composition used for lubrication has good adhesion, then it is practically not squeezed out of the gearbox through the gaps.

For different models, lubrication is consumed in different ways. This is determined largely by the intensity of the use of motorcycles and heating the transmission mechanism. It is believed that the lubricant is enough if the temperature of the gearbox during operation does not exceed 40 ° C.

By consistency, lubricants for a trimmer for grass can be:

In terms of composition, the following types of lubricants are in demand:

• graphite, significantly reducing friction, as a result of which the rotation of the gear improves;
• lithium, which are also an excellent anti.corrosion composition, saturated with increasing the wear resistance of metal with additives without harmful substances;
• universal, containing high.degree mineral oils and improving operational characteristics components.

An example of suitable lubricants are: Champion EP-0, Gear Grease Oregon, Oleo-Mas, Azmol 158, Litol.24. You should also pay attention to the advice of manufacturers on this issue and use the materials they offer. You can buy them at specialized retail outlets.

A lubricant Champion EP-0 Universal 120 gr

The algorithm for self.lubrication of the gearbox

To make lubrication of the gear ratio, its preliminary disassembly is not needed. A special hole for these purposes has already been laid in the device (it is shown in the photo below). In addition to gears, when lubrication, you need to pay attention to such elements of the mechanism:

Pour oil or apply solid grease through a tavniper closed by a screw. At the same time, they perform actions in the following sequence:

• The gearbox body is cleaned of dirt and adhering grass, especially thoroughly the plot around the plug so that the garbage does not get inside the mechanism;
• Using the appropriate tool (often it comes with a trimmer), the cork is unscrewed;
• The selected lubricant is introduced from the tube into the open technological hole, or using the syringe, as shown in the photo further;
• screw the cork in place.

When making lubrication, you need to rotate the knife so that it is evenly distributed through the teeth of moving gears.

If for any reason the gearbox needs to be disassembled, then the old lubricant must be completely removed from the entire surface of the gears and housing, shaft, and only then use the new. The disassembled mechanism is conveniently lubricated with solid compositions.

The entire reducer lubrication process is demonstrated in the video:

Lubricating the gear node is required at least once during the year, but it is recommended to do this every 20 hours of intensive use of motorcycles. If the first signs of malfunctions with the mechanism appear, then you need to make lubricants as quickly as possible.

How to lubricate the upper bearing of an electric trimmer for grass

From time to time, in the midst of saturated work on mowing the grass, your trimmer for grass begins to make nasty, grinding sounds. This complains the gearbox on the lack of lubrication. a more actively loaded node of the device. And soon, these “warnings” may follow the junction of the drive.

When working, the mechanical part of the trimmer for the grass is loaded with contact efforts on the teeth, resistance reactions from adhering grass (from time to time. with mud), dynamic, shock loads due to the time of the time that changes the rotating moment. The lubricant for the gearbox of the trimmer for the grass should completely take into account these features, because the selection of the brand is obliged to strictly personal.

Subsequent reasons are taken into account:

• Manufacturer’s brand. Any trademark is not unreasonably focused on lubricating its own production (you can talk about cheap Chinese products later). This applies to manufacturers such as Husqvarna, Stihl, Huter, Makita, etc. The exception is trimmers for production grass: for example, the caliber in the annotation of the user generally does not show the brand of lubrication.
• Break of lubrication. How everyone knows that it remains to make our client lubricants are divided into three groups. high.skis (colloidal allowing accounting (software) containing different additives), plastic compounds of universal implementation and solid lubricants softening during operation.
• Excellent adhesion to the surface of the parts of the gearbox, as a result, in which lubrication is required not squeezed into the gaps in other words.
• The intensity of eating lubrication by the gearbox. Here you have to focus on their experience and advice of professionals, since some auto industry of trimmers, hoping for their own service centers, generally do not give clear tips regarding the period of the gearbox work between 2 lubricants.

We extend the life of the bushings of electric trimmers

The consumption of the lubricant also depends on the temperature in which it requires it retains its lubricant. When heating the gearbox to 40 ° C, it is believed that its working conditions are satisfactory, and there are enough lubricants.

It is believed that a universal lubricant for a trimmer gearbox is unacceptable, but this is different differently. The real suitable lubricant will be the one in which the subsequent components are located:

• Anti.sympathetic supplements, which include no poisonous lead;
• Hard lubricants with the presence of graphite as it is also called molybdenum disulfide (the latter is better, since here the lubricant is one hundred percent preserved for a huge spectra of the shaft revolutions);
• Only mineral (inorganic!) oil, with the highest degree of cleaning.

The mentioned requirements are fully met by Gear Grease Oregon or Champion EP-0 lubricants, Oleo-Mas-Mas-Mas-Mas compositions, Litol.24, or asmol 158, in addition, those recommended by the manufacturer of a certain model of a trimmer for grass.

At the top of the case, where the gear block is installed, there is a technological hole that is drowned out by a screw during the operation of a trimmer for grass. Such a screw is turned out, and 1.5 2 ml of grease is introduced into the hole when using a nose available on the tube. If the lubricant was purchased in another packaging, then for this operation the ordinary one.time honey syringe is suitable for this operation.

After this fact, the screw is installed in the same place. This function, regardless of the advice of the user, should be done every 10 15 hours of operation of a trimmer for grass in working mode. Other reasons for updating in other words of the lubrication of the gearbox are the independent performing of small regulatory work (for example, cleaning and washing the gear of the gearbox before the beginning of summer), repair of the node, preserving the trimmer for grass for the period of cold weather, etc. D.

Lubrication of the shaft and gearbox of the lawn mower, trimmer for grass

Dismantling of the rod of a lawn mower, a trimmer for grass for lubricating the shaft and gearbox on the example of the PRORAB-8406 motorcycles. Removing a shaft from the bar differs from some videos.

Basis shafts (gasoline trimmers) rotate in sliding bearings, put into the bar. The lubricant applied to the shaft penetrates the scurry of the shaft with bearings, thereby reducing the friction force, slowing down the wear of the parts and increasing the service life of the motorcycle. And as a bonus: a decrease in vibration and noise, a slight increase in the power of the tool.

Removing and lubrication of the upper shaft of a trimmer for grass

First of all, we remove the lower part of the rod from the connecting coupling, and then disconnect the coupling from the upper part of the bar (here we are talking about a coupling connecting two halves of the bar).

Trimmer for PRorab-8406 grass with a detachable coupling and the lower part of the bar

Now the most interesting thing: on some videos, as on this, holding the ticks of the shaft with ticks, sticking out of the upper part of the bar from below, knock out it with blows on the rods from the rod along with the rolling bearing (here we are talking about the coupling connecting the upper and lower shafts). Some have a gas station with a collapsible bar, as in the video, a coupling connecting the upper and lower shafts, it is put into the rolling bearing.

With our trimmer Prorab-8406 and such a number will not pass like him. They do not have a rolling bearing, and the connecting coupling (sleeve) is a continuation of the shaft of the upper rod. A locking ring is installed in the upper part of this shaft, which must first be removed.

The place of fastening of the upper part of the bar to the clutch clutch body

• We turn off the central screw completely. It fixes the upper part of the bar, partially entering the hole drilled in it. We loosen the side clamping screws and remove the bar from the clutch clutch body.
• We put out the shaft from the upper part of the bar on ourselves how much the backlash allows to get to the stop ring and remove it. A special puller may be needed. We extract a locking ring.

Stop ring on the upper shaft Motokos

• Without a locking ring, the upper shaft is easily extracted from the bar from the opposite side. Lubricate it, not forgetting about the slots in the bushings (couplings) on the shaft of the bar and on the clutch shaft.
• The greased shaft is installed in place in the upper part of the rod and fixed with the locking ring. We insert the bar into the hole of the clutch clutch cover and combine the hole on the bar with the threaded opening of the fixing screw.
• We screw the fixing screw and fix the upper part of the trimmer rod for the grass with side screws in the clutch lid.
• Clean the connecting coupling of the bar from the garbage and install from below on the upper part of the bar.

I don’t have a puller, and I use two large stationery paper clips to extract a locking ring. Previously, they need to be straightened, on one side make a half.ring for the fingers, and on the other. bend small hooks.

We capture holes in the locking ring and try to push them apart. With difficulty, but it turns out, and the ring is afraid of. If you know another way to remove a locking ring without a puller, share in the Комментарии и мнения владельцев.

In many videos, masters recommend using Shrus-4 grease, this is the best option. In its absence, to lubricate the shaft of the gas mowing rod, you can use Litol-24, which is focused on temperatures up to 130 ° C. But solidol, with the worst lubricants and working at temperatures up to 70 ° C, is not recommended to use.

However, if you urgently need to lubricate the shaft of the rod motorcosa, but there are no suitable materials, then solidol or even ordinary motor oil will be better than nothing at all.

Light models rating

Continued trimmer for grass rating 2019. The weight. The main criterion for choosing your own car. After about 15 minutes of work, you will feel every 100 grams of brush weight.

The weight of the model is considered more than 5 kg. You will also like the low level of noise at work.

Usually the most difficult part of the trimmer for grass is the engine. The more powerful it is, the more difficult. They try to make them from light materials, and light models are very popular in the market.

Pros and cons of a trimmer for the grass Stihl FS 55.

This model is suitable for you if you have a large territory or complex area.

If you choose the right nozzle, you can cut everything. reeds, shrubs, continuous dry

The shoulders will also delight you with their comfort and softness. And at the same time, the Stihl FS 55 is in the middle of the price.

The disadvantages include the fact that it does not need to install hard drives on it, it is not intended for this.

Husqvarna 323 r. Benzotrimmer

Very durable with proper circulation. Sometimes he consumes a lot of fuel. But this happens with improper dosage when mixing gasoline and oil. And with the right combination, this model will be very economical.

With a weight of 4.5 kg, Husqvarna 323 R has a good power.

• Medium performance.
• light.
• Good design.
• High power.
• Strong motor.
• You can install it.

Always pay attention to when you buy equipment. You can find glasses and headphones in them, and sometimes even a file.

The apparatus of Japanese, therefore, practically does not emit exhaust gases during operation. This is especially appreciated when working in densely populated areas or in nurseries. And if you often wash the mesh filter inside the silencer, then this trimmer for the grass will last a very long time and without problems.

The engine is configured to a relatively low power at 12500 rpm, and the vibration decreases during operation, the blades operate at 9900 rpm.

The height of the handle on a tripod is adjustable to any height, the handle itself. Very convenient T-shaped bike.

The deck and the engine of the engine are made of plastic, and made of strong plastic.

Now we will find out what a gas trimmer for Partner XS grass is. With a capacity of 700 watts, this device provides high efficiency, and in any conditions. He also has a quick launch due to the built.in fuel pump, and the residual fuel and air from the carburetor are removed very quickly.

0.34 liter tank is sufficient for long and uninterrupted operation. The widest part of the block is 41 cm. A three.dimensional head works as a semi.automatic device, as a result of which the operation of the cutting part is significantly accelerated, and the fishing line for a trimmer of hair growth is lengthened by pressing the trimmer for grass to the ground.

This is very suitable for beginners to master gasoline trimmers for grass. The pen helps to get into hard.to.reach places, for example, between trees and shrubs. Or where you need to leave one and the other to remove.

So if you have alpine slides or other landscape design options on your site, this is for you. It will also prove itself well when running:

Sikars are turned on, they can even remove young trees.

Weighs 4.1 kg. Simple and reliable control buttons are located directly on the handle. The fuel pump is supplied to the carburetor, so there are no jerks when starting the engine. And for you glasses are included.

Gas braid for grass. Overview of the most powerful of them

If you want to purchase a light and powerful gas trimmer for grass for personal use, this article will help you see the following models. A powerful trimmer engine affects the performance and consumption of gasoline. The more powerful the engine, the rougher the grass trims a trimmer for grass, but it will consume a lot of gasoline.

The simplest trimmers for grass are equipped with a 1-liter cylinder. For lawn grass there will be enough power of 170. 550 watts. And the mowing process is carried out using a mowing fishing line of hair growth.

They are reasonable

But if you. As a rule, you see that the engine volume is from 1 to 3 liters, this is a class of professional equipment, but it is suitable for pruning and garden and site with medium area.

But the volume of more than 3 liters indicates an extremely powerful gas box such as Vega 4 liters from Germany. This can reduce:

Himself, its power is 1000 watts.

Very suitable for crossed terrain. The overall design of this model is balanced for simplicity of operation and operation, and the power will allow you to perform complex work.

1.8 liter engine, and 1 liter of fuel can be poured into it, all this allows you to work freely for a long time, and the efficiency is very decent.

Of the shortcomings, it is worth noting a large weight and high fuel consumption.

A powerful motor protection engine allows you to work with this model in difficult conditions. Users enjoy this for its duration and uninterrupted work.

It comes with a set of nozzles, which significantly expands the list of devices.

Particularly well.forged steel shafts that easily cope with shrubs and young trees and other rough vegetation.

Among the shortcomings, we note a large weight and sensitive vibration.

Despite the weight of 8 kg, the cost of this unit is faster than the budget options. Absolutely unpretentious and at the same time a rather powerful engine is ready to perform the most complex tasks.

Forged shaft continuously delivers a cutting tool. Thus, on Champion you can install heavy discs for complex shrubs, young trees or solid dead wood.

The touch of this model cannot be separated. Access to replacement of candles or air filters is simple.

Therefore, Champion is not complicated at all in maintenance. This goes with a knife with 3 blades and a speed of 8200 revolutions per minute, plus a nose of a trimmer for grass. Separators or incisors are purchased separately for this brush.

With a mowing of grass, a strip of 25 cm is covered, the motor here has a power of 2 liters, and the rotation speed is 10500 rpm. and located in the upper part of the structure. And also there is a protective brake from the random start of the engine.

Its basis is a two-stroke 1-cylinder engine. Produces with a maximum capacity of 4 liters. 3200 watts. For him 8000. 9000 rpm. Normal working indication.

AI-92 gasoline should be used for refueling, other options may be faulty. Vega rod is not collapsible, and the handle on it is light and very convenient to use.

• There is a TAP EN GOW system.
• Quick launch system for Smart Start.
• Its hard shaft is inseparable.
• The engine has a overheating function.

The trimmer for the grass includes 1 knife for cutting bushes and 4 steel knives for various purposes, all knives are branded. And there are 2 drums with fishing rods, one of which is made of plastic and the other made of metal. They will be useful to you in hard.to.reach places of the site or on a common lawn.

Of all Echo trimmers, it is one of the most noticeable in terms of their power. Refers to professional gasoline braids.

• in large areas with continuous work.
• in difficult working conditions.
• mowing dense and solid grass.
• deforestation or shrubs or shrubs.

The model has a protective cover. In general, ECM SRM. 4605 has established itself by power and weight.

• Candle key.
• Metal knife with 3 blades (25.5 cm in diameter).
• 2 protective covers for a knife and cutting element.
• A backpack type shoulders.

The ignition system uses the capacitor. The gearbox is made of a hard shaft with a diameter of 8 mm. A reliable lock holds the throttle well.

This handle of a gasoline brush is made on the U-shaped bicycle pattern. A screw nut will keep it in a position convenient for you.

It is easy to get an air filter, and a special system isolates you from vibration. In continuous mode, this brush will be absolutely reliable!

The best trimmers for grass for work in an impassable area

When choosing a bush for your site, especially if it has a complex landscape, be sure to consider this when studying the specifications of the model you have chosen. Not every suitable price is suitable for such work. Make your choice on a powerful device with many accessories available for a variety of purposes. Then you get a whole arsenal of useful devices in one bar:

The function of protecting braids for grass from overheating during prolonged operation will also be useful. In the end, the complex area cannot be processed quickly. A special sensor will tell you about the need for a break on time.

Some models have at least a convenient function for rotating cutting parts for work in the opposite direction.

Description of a trimmer for Echo SRM-22GES SB grass

Echo SRM-22GES SB. Universal lawn mower for unprofessional use, which is easy to handle, reliability and safety. This model will cope with the haircut of the lawn in small and medium sections. Due to its ergonomics and versatility, such an instrument. This is a good choice for owners of small country houses and summer residents.

A trimmer for Echo SRM-22GES SB grass is equipped with a two-stroke engine with a capacity of 0.9 l.With. and ES-START light launching system. Thanks to the function of lightweight launch, you do not need to make much effort in order to start work. The built.in primer (manual fuel pumping pump) also facilitates the launch of the motor. An increased translucent fuel tank is convenient to see the remainder of fuel and allows you to increase the interval between refueling.

Lubrication of shaft and gearbox on a benzokos.

On the Echo SRM 22ges SB there is the possibility of choosing a cutting tool: a trimmer cord or a cutting disk for grass. A three.blade knife is made of special steel, so the cutting edges remain sharp for a long time. Trimmer for grass is equipped with a semi.automatic mowing head. Safety provides a shock.resistant casing and protective glasses. A detachable shaft is installed on this model that makes the technique convenient for storage and transportation. For good controllability, the lawn mower is equipped with an ergonomic “bicycle” handle and a comfortable shoulder belt.

• A guarantee of the quality and originality of the technique, the company “Direct Hands”. The official dealer of the Echo brand in St. Petersburg and the Leningrad Region;
• Favorable price for benzenery and maintenance;
• pre.sale preparation of technology and briefing on safe handling it;
• “Straight arms”. Authorized service, we will carry out for you the warranty and post.warranty repair of the trimmer for Echo grass high.quality and on time.

Operating instructions for a trimmer for Echo SRM-22GES SB grass

• The cost of delivery of equipment for repair for individuals and legal entities located within the range. free (more detailed information and on the page of the site “Delivery of equipment for repair”).

800 for other areas of St. Petersburg within the Kad.

Trimmer for grass gasoline Echo SRM-22GES

Trimmer for grass gasoline Echo SRM-22GES. One of the lightest benzotrimers to work with the Echo SRM-22GES metallic three-blade disc, has a two-stroke high-cost Japanese engine performed using technologies inherent in professional gas-tools. The engine has an forged knees of the shaft and a connecting rod, as well as the patented triple coating of the walls of the cylinder Al-Fed. The engine crankcase is made of highly asshuman steel. The engine shaft is on a double bearing, which significantly lowers vibration and increases the engine resource.

The semi.automatic spool with a fishing line is made of shock.resistant plastic and seasoned with a large.diameter fishing line (3 mm), which significantly distinguishes a trimmer for grass from competitors’ models. A three.lobed steel disk of a trimmer for grass easily copes with weed and fine.sized shrubs.

The trimmer for the grass has a direct shaft, as a result of which the torque is transmitted through the corner gear steel gearbox, increasing the strength and reliability of the structure. Ergonomic handle, has a double safety trigger, blocking a random press of gas handle. A proprietary Japanese ES-Start light launch, which significantly reduces the force required to start engine, is used on the starter coil. The fuel pump is a cold engine to start a cold engine.

• High.speed Japanese two.stroke engine
• Direct shaft
• Steel disk in the kit
• shoulder belt included
• Forged crankshaft
• Forged connecting rod
• Large diameter of the cutting fishing line (up to 3mm)
• Semi.automatic reinforced rogue with fishing line
• Light starting system
• The T-shaped handle is adjustable to the growth of the operator.

Light and reliable. Stroblemal launch. knife and belt for two shoulders in the kit.

If there is a lot of high weeds. it is better to choose a more powerful braid.

Three seasons. no problem. The perfect summer cottage option.

not very powerful, insufficient volume of fuel tank

I bought a motorcycle for work in the country not only for the mowing of young and delicate grass, but also weeds. Therefore, I chose a high.quality and reliable tool that would not jam at the first meeting with Stibrean. A braid for herb with a task coped without problems. I liked the full equipment (there is everything you need for work).

Light, works confidently, does not vibrate, disk, fishing line for a trimmer, a two shoulder belt included.

Yes, she has no minuses, this is the coolest braid for grass in my whole life, well, frankly, the most expensive.

Great model from the Japanese manufacturer. It works with a bang. The engine works smoothly, the vibration on the handle is minimal compared to my old oblique partner. Very comfortable handle. Works both with a knife and a fishing line. There are no problems with starting the engine, I use only the original oil and AI92.

light, universal, relatively inexpensive

I bought a braid for a village, a processing site of about 15 acres, mixed grass. The trimmer for the grass showed himself at the level, Echo does not make bad things. Minimum vibrations, settles when starting very quickly, in itself easy, but at the same time high. On an overgrown grass with a knife, he showed himself without any praise, cuts off the grass to the waist and thin shrubs at a time.

Easy to operate, figured out without instructions, although this is my first trimmer for the grass. Comfortable handles, material feels that high.quality. It works quietly for a gasoline engine.

They are not, every invested justifies

I purchased this unit a year ago, I used all season, no complaints about. For this price, you can hardly find something better.

How to lubricate a trimmer gearbox for grass or motorcycles: proper care of garden equipment | (Photo video)

Many Trimmer users do not pay much attention to servicing their tools. In particular, this applies to such a node of motorcycles as a gearbox. The work of the gearbox is associated with heating.

With prolonged operation, motorcycles occur regular overheating of the gearbox, which leads to its breakdowns. Reducer breakdown leads to the fact that the tool is unsuitable for operation and it must be repaired.

Reducer repair is an expensive event, so it is recommended not to bring the tool to such a state. The main reason for overheating of the gearbox and its failure is the absence of lubrication in it.

The article tells how to properly lubricate the gearbox of a trimmer for grass to avoid its breakdowns.

Necessary tools and materials

The following tools and materials will be needed for the maintenance of the gearbox:

Hexagonal key for opening the reducer lubricant hole

Usually, such a key is included with a motorcycle or trimmer.

The next tool is a regular medical syringe with a volume of 10 ml. It is with the help of a syringe that the lubricant enters the gearbox.

It is recommended to use proprietary lubrication from the manufacturer Motokos. In extreme cases, you can use any lubricant to lubricate rotating mechanisms, for example, Litol 24.

We open the gearbox

In order to gain access to the gearbox, it should be opened. To do this is quite simple. you need to unscrew the gearbox with a hexagonal key. This bolt for all Motokos is in the same place. directly near the working body.

Spring refueling action

The diameter of the tube with grease does not correspond to the diameter of the gearbox

In order to easily make lubrication into the gearbox, it is necessary to use the syringe.

Then a syringe is filled with a tube of a tube.

After which the piston is again inserted into the syringe. The syringe is ready to refuel the lubricant in the gearbox.

ACTIVITION OF SUPPLE OF Lubricant in Gear

The syringe is inserted into the gearbox hole

First, the syringe is inserted into the gearbox hole.

Squeezing in the gearbox slightly lubricant and turning it for about a quarter turnover

Then you need to squeeze a little grease in the gearbox and turn it for about a quarter of turn.

When all the lubricant is squeezed out, the process can be considered complete

Lubrication is seasoned in small portions. After each supply of lubrication, the gearbox turns on 1/3. 1/4 turnover. It is advisable to choose the amount of lubrication for each refueling so that the gearbox during the lubricant makes a full revolution.

Activation of the gearbox

After the gearbox is filled with lubrication, twist the gearbox and it is well clamped.

How to lubricate the motorcosa gearbox (the easiest way)

How to lubricate a trimmer gearbox for grass or motorcycles: proper care of garden equipment | (Photo video)

Feedback with our readers is very important for us. Leave your rating in the Комментарии и мнения владельцев with the argument of your choice. Your opinion will be useful to other users.

Possible malfunctions of a trimmer gearbox for grass, a gas mowing gearbox, and gearbox Motokos

To repair the starter of the trimmer for the grass, it will be useful to disassemble it first, and later collect it. This process is not a particularly difficult occupation. For work, a screwdriver with a suitable shape is useful for work.

Everything should be done neatly, observing safety precautions, acceptable, so that the spring does not injure the master when random.

Parsing the starting node

The start.up mechanism is disassembled in order to establish new details of the incorporation broken in the subsequent sequence:

• spin a screw with a screwdriver, fixing the pulley with a starter lid;
• take out a spring and antennae;
• Remove the pulley neatly (it is necessary to unscrew your head or work with all this, putting on your glasses and gloves earlier);
• determine why the starting mechanism has broken;
• If the spring collapsed virtually one hundred percent, then it is replaced;
• When the spring exits from the hook, it is installed in the original place, bending the antennae before that (the photo shows the styling process);

After the spring plate is installed inside the groove, carefully make it twisting

To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst

Even if you carefully remove the video, then the spring strip flies very rapidly from the coil and can injure the hand with its sharpened edges

To put a spring plate in the same place does not always go out. It often slips, because the samples are required to repeat to the merit.

Starter assembly

The assembly of the starting node is carried out in a row of steps:

The coil is turned over, installing it so that the spring bend will definitely stand in the groove of the case, as in the photo below;

When making the stated manipulations, you must definitely lay two goals. If this is not done, then the spring over time damage the plastic cup, and when it is pulled, the jerking off will begin. Because of this, there is a feeling that the spring has flown away. In order to remove such a defect, it is necessary to install this part of a larger length or an additional goal.

When such spare parts are absent, you can just unscrew the screw a little, and the starting node will begin to work without shaken. But such an option is temporary. it is better to repair excellently as a razor as possible.

Spring tension

After installing the spring, it should be pulled. For this they make subsequent deeds:

• Remove the handle from the starter cord;
• Then the rope is inserted into the coil groove;
• create a stretch of the spring, rotating the coil in the direction of the back of the clockwise (views);
• make the required number of revolutions indicated in the operating annotation for the used trimmer model for the grass and the corresponding length of the cord used;
• At the very end, the rope is threaded into the hole created for this, located in the starter cover;
• put the handle in place, fixing it with a node.

If after the repair the spring continues to fly, then you can get rid of this by subsequent methods:

• Squeeze the suitable piece of the plate into the groove at the location of the spring hook;
• drill holes from the 2nd sides of the groove in the coil, into which stick the sprout hook and fix it with a wire.

Replacing a torn cord

A torn rope is replaced in such a sequence:

• an old cord is removed;
• choose a suitable rope (thickness and length);
• Having reached it through a special hole in the coil, a knot is tied;
• Sprinkle a spring, producing the required number of revolutions;
• Fix the pen.

Then it is necessary to stop the crankshaft so that it does not rotate when the coupling is weakened. For example, to fix the crankshaft, for example, a large wrench, remove the lid of the manual starter and plunge two bolts into the ignition rotor. Or unscrew the spark plug, lower the piston into the BDC and fix it there by inserting the cable into the spark plug opening.

Then unscrew the clutch itself. Using a chainsaw key, or a Bulgarian disk key, or a home.made wrench (such as an old two.alite tire), unscrew the clutch clockwise (there is left thread) to turn off significant efforts.

Then remove the leading star from the chainsaw. The clutch drum is replaced by the rule: Replace two tires. Replace one drum.

Then put on the new sleeve and tighten it with your hand until it stops (it turns counterclockwise). In this case, the crankshaft must be blocked again so that the clutch does not break the starter located at the other end of the crankshaft.

Then everything goes in order, reverse disassembly.

To completely tighten the clutch on the chainsaw, it is necessary to move the label brake handle, start the chainsaw, and then remove it from the brake.

The principle of operation of the centrifugal automatic gasoline slop of saw.

Когда бензопила работает на холостом ходу, сцепление нагружено, хотя они вращаются вместе с коленчатым валом, но не касайтесь барабана сцепления (обычно чашек сцепления), поскольку они тянутся пружиной и, следовательно, не передают крутящий момент от двигателя к двигателю. When the engine speed reaches 4000 rpm, the weight weights do not compress under the influence of centrifugal force, and pressing their outer surface of the friction to the inner surface of the clutch drum, they begin to rotate, thereby transmitting torque from the dust engine. install. When the chain stops sharply during operation (for example, it jams), the coupling does not allow the engine to stagnate, since the friction loads at high speed will slide in the drum, and at speeds below 4000 the spring will compress the load.

User reviews about lubricants

Experts advise using only original materials, the characteristics of which meet the requirements of the manufacturer. If there are no one, you should clarify how to lubricate the gearbox of the trimmer for the grass. Experienced users do not advise using solidol, because this material is not suitable for the temperature and speed characteristics of the node, as well as in consistency. Also, the above material does not have anti.intelligence properties.

The range of operating temperatures of the solidol is from minus 40 to 65 degrees, but even with such parameters in the process of heating, the density of the material increases, and the lubricant itself becomes rough. With emergency need to process the tool, you can use Litol-24.

Serving gasoline trimmer for grass

Most motos and trimmers have a flexible shaft in their design. Its condition must be checked at least 1 time for 50 working hours. To perform this operation, you need to remove the tip tip, pull out the shaft and inspect it, then grease it.

Inexpensive materials are suitable for the shaft care, it is more difficult to choose them for a trimmer gearbox for grass. How to lubricate this mechanism-depends on the tool manufacturer. It is best to use the materials that contain molybdenum disulfide. The latter provides smoothing and filling cracks on the work surface, therefore it is especially appreciated among users.

Important: the use of a large amount of lubrication with high density leads to overheating of the mechanism, increased friction of working couples and fuel consumption. Therefore, the process of selecting materials and prevention should be attributed responsibly.