How to hang a grass trimmer on the wall.

To hang a grass trimmer on the wall

Hi all! Today I will share with you a cool idea how to make a powerful electric mower with the help of a drill and an old pipe with a cable from a burnt grass trimmer. I live in my house and every year I have to mow the grass around the house. One day my grass trimmer burnt out, but the grass didn’t stop growing.) And then I got this great idea. So, let’s begin.First we need a piece of 32 pipe, to which you will need to weld two pieces of square rebar in the order shown in the photo.

Hello, everyone! Today I will share with you a cool idea how to make a powerful electric mower with help of a drill and an old pipe with a cord from a burned out grass trimmer. I live in my house and I have to mow the grass around the house every year. One day my weed trimmer burned out, but the grass didn’t stop growing.) and then I got this great idea. So, let’s begin.To begin with we need a piece of 32 pipe, to which you need to weld 2 pieces of square bars in that order, as shown in the photo.

Ways to mount items of medium severity

The same, beloved by many, modular paintings or photo frames made of wood with glass protective sheets weigh much more. And if the format exceeds the size of A4, they can even reach the weight of 1-1,5 kg and more. But that’s no reason to grab the peorator and remind your neighbors of yourself. If several painless methods of attachment that can easily withstand large objects and heavy plates.

The hook-and-loop

The hook-a spider is a small smart object, which in spite of its simplicity and modest size is very reliable. It is a plastic product with a flat back. On the front side in the lower part there is a hook, reminiscent of the hook on a clothes hanger. And on the top edge are four sharp spikes. This is what holds it in place securely.

Fix the spider to the wall as follows. in the chosen place make a mark, to which lean the fastener flat side. The spikes will be facing you. Now use a small locksmith’s hammer to hammer these spikes into the wall. Do not strike with the full swing so as not to damage the plastic surface or break it. Once the spikes enter the wall flush with the plastic, the hook will be securely fixed. Note that the hook is located at the bottom. Therefore, the loop on the back of the picture or plate must be made at such a height that its surface hides the fastener completely.

The hook can hold objects weighing up to 2 kg. This is his average. The smallest model is designed for a weight of 1-1.5 kg, and the largest model can hold up to 9 kg.

It is very easy to remove such a hook. Grasp the outer plane of the hook with pliers at the level where the spikes go into the wall, and simply pull it out. It will leave a mark in the form of four small holes, which can easily be smoothed out. It’s definitely better than a dowel sticking out of the wall.

Miracle Velcro

Miracle Velcro, or “Command,” has proven to be a great way to secure items to flat, smooth walls. These Velcro strips are made of plastic. They have a small hook at the ends. This system consists of two parts that have a sticky layer. One part is glued to the wall, the other to the back side of the desired object, and then they are joined together.

The beauty of these Velcro strips is that they can easily be removed without damaging the wall surface and reused, unlike double-sided tape.

There are several types of kits, which are differentiated according to the allowable weight. The most minimal set is 4 sets of 8 small strips. Medium includes 3 sets of 6 strips each. In the first case, one Velcro can hold 100 g, and the whole set. 450 g. In the second case, the velcro will hold 400 g, and the whole set will hold a load of up to 1 kg. To remove or re-hang a painting you just need to remove the white stripe from the system.

Fastening system “Kreps”

Fastening system “Kreps” is another modern system designed to attach various elements to the wall without using nails and without damaging the surface. “Kreps” is designed for items that are attached to ropes or cords. Therefore, if you like this method, you will also need to take care of attaching the ropes to the back of the decorative items.

The system is a plastic element, the back side of which is flat and has an adhesive layer. Make sure the wall surface is smooth and level. Then you get a high security of attachment. The lower part of the device is retractable and has several rows of small hooks. This system is very easy to use, even for the first time. It is necessary to remove the protective tape from the adhesive tape and glue it to the underside of the hook. Now you need to remove the protective tape on the second side and lean the hook against the wall. Press down firmly for 30 seconds. Now you can hang the painting. Each clamp can carry a maximum of 1.5 kg. To hang a larger object, use several fasteners. The main thing is to place them evenly, so as to make the picture close to the wall.

Curtain rail

A curtain rail is another sure way to hold weighty objects. And if you can find an old curtain rail, you can borrow it from there. We will also need a sturdy trimmer line or kapron thread.

We will be making a hanging system that will allow you to place several objects at once at different heights and not be conspicuous at the same time. Inside the rail will be small plastic hooks, to which you need to tie a trimmer line or thread, given the desired length and distance between objects. Now you need to glue the rail to the wall and fasten to the ends of the threads of the picture. The improvised installation is ready. The advantage of such a design is that at any time you can add or, on the contrary, remove several items.

Balancing the handles

Find the right handle position for easy operation of the chainsaw. For easy adjustment it is desirable to find a model with separate adjustment of handles. With these models, the handle is secured with four screws. You can adjust the angle of the handles by unscrewing the upper screws. By removing the bottom screws, you can adjust the handle to your height.

Some models have twin tillers with non-adjustable turning angles. In order to ensure that when working with such scythes, the handles do not rest against your feet, they must be lowered on the working shaft. You have to bend over or lift the lawnmower to the lowered handles, so when you work for a long time, your back or arms get tired.

Mount for the grass trimmer on the wall with their own hands

Most of the time garden tools take up all the useful space of the shed: “one meter by one meter of storage space and everything is crammed with shovels, hoes and rakes. it’s impossible to pass”. Let’s see how the storage of shovels and rakes, trimmers and other devices was arranged by the most accurate and organized users of FORUMHOUSE.

ᐅ Hammer PRT 620C PREMIUM reviews. 30 honest customer reviews of the Hammer PRT 620C PREMIUM

The stand for garden tools with their own hands

Such a stand is easy to make with your own hands. First, calculate how many cells you will need to store your shovels and pruners. The crossbars, 40 centimeters long and 6 centimeters wide, must be nailed to two boards: one at the top and one at the bottom. The boards should be in the center of the crossbars. Make the bottom box (you need it both for the stability of the structure, and to fix the inventory in the cells). At the ends of the box and grid are nailed to support, boards of height 70 centimeters.

If you’re too lazy to make one, you can buy one: plastic storage racks with long handles of various diameters are available at many gardening stores.

Some people use upside-down beer crates and put shovels, pitchforks, etc., into them.д.

All these supports do not take up much space, but they do take up some space. This is why many of our portal users prefer a different approach to storing shovels and planers: when not creating a special space, but rather using the existing walls and ceiling. For this purpose, holes are made in all cuttings and strings are tied to hang them on nails under the ceiling, special semi-circular devices for storing hoses and extension cords are nailed to the walls, etc.п.

I recommend to master not only the floor surfaces, but also to hang tools on walls if possible. It is very convenient to lift bicycles during storage, it is also possible to hang chain saws, garden vacuum cleaners, gasoline and electric trimmers on various hooks.

TigraOSP figured out how to store the gasoline trimmer, “a very horny thing to store. The solution came as a result of the device of the shelf in the store: there should be such a ledge of two “rods” with a semicircle on the end, like a grasp for the Russian oven under the pig-iron. Hanger in the form of a hook was welded to the size of the trimmer for grass, put it in a rubber hose to avoid scratches on the trimmer and nailed almost to the ceiling.

Hanging and not noticeable, just class. Walked over, picked up the shaft, lifted it up, took it out of the grip and there you have it.

We will show you a few examples of countermeasures to the chaos of keeping garden tools in excellent condition for a long time, implemented by the users of our portal.

Pirmid built a shed and put in it this special compartment with a separate entrance for shovels and other garden stuff. “After a futile attempt to get a pitchfork out of the intertwined pile, this design was born.”.

Na zzz also set up a little storage room for gardening tools and equipment. Staples bought at the hardware store, grates, hooks and drawers at the hardware store. Now storing shovels in the shed on a coat rack looks like this:

Here’s another inspiring example. a rack for shovels and rakes:

FORUMHOUSE user Limmpopo offers the following option for storing equipment: all gardening “tools” stand in string in special niches made of PVC pipes.

Everyone liked the idea, it’s very simple, but very beautiful! But. not so convenient. To insert into such a rack a shovel or a rake, they need to be raised almost to the ceiling. In FORUMHOUSE this know-how was improved: a cut is made in the side of the tube, which incidentally will allow insertion into the rack tool with a handle on the handle. You can do something like a clasp: cut a strip from a plastic bottle, fix one side of it firmly to the wall and make a hole in the other. You put the tool against the wall. “you fasten a loop in the nail on the second wall”.

Another idea, for really pedants: to make a notch at the bottom, limiters from the sewer diameter of 50 millimeters, and put the tools not upside down, and the working edge down. Then they will stand straight as a string not only in the picture but in reality as well. By the way you can try to make such racks from plastic bottles.

Here’s how else you can store any garden tools at the cottage on long cuttings. The simplest self-made rack: two brackets, one of them has a string with a nail on the end. an invention of Anna Sokolova. Tools stand neatly in a corner, they do not get tangled underfoot, and are easily taken out as needed. And most importantly, they take up very little space!

Small gardening tools are conveniently stored in such bags:

Or hang them on metal slats with hooks (they are more reliable and cheaper than plastic stands).

And here. just a brilliant design idea: small garden tools, all these trowels and rippers are hung up by the teeth of an old rake, which, in turn, is hung on a nail hammered into the wall.

In general, the system of storage of garden tools depends on the room. It is one thing if you have at your disposal. half of the garage or specially built for this purpose hovel, and another. if all you and your tools. a corner under the stairs measuring one meter by one meter. “First the room, then bringing beauty and convenience in the placement of such necessary to us buckets, shovels, forks, rakes, etc.д.”. they say on FORUMHOUSE. So, Stella777 has a separate room for tool storage. an extension of the kitchen, but with a separate entrance. Stella777 has clad the walls with lacquer, bought hooks and shelves in construction stores, and now has “order and a free approach to tools”.

Another important point: before putting a tool in its place most of FORUMHOUSE users clean it or wash it. If you clean a shovel even after a simple digging, wash it under a tap or in a bucket with water, you will eventually develop a good habit to keep the working tool in order.

We offer you our article about unusual but effective garden tools, video film about new products on the market of garden tools, discussion on the theme: “A necessary set of garden tools: what to choose”.

Wall mount for grass trimmer with our own hands

often than not, the gardening tools of the dacha owner occupy the entire useful area of the shed: “the storage space is one meter by one meter, and everything is full of shovels, hoes and rakes. it is impossible to pass”. Let’s see how the most accurate and organized users of FОRUMHOUSE set up storage for shovels and rakes, trimmers and other devices.

ᐅ Hammer PRT 620C PREMIUM reviews. 30 honest customer reviews of the Hammer PRT 620C PREMIUM Peorator

Stand for garden tools with our own hands

It’s easy to make such a stand with your own hands. First, count how many cells you will need to store your shovels and pruners. Nail crossbars 40 centimeters long and 6 centimeters wide to two planks: one on top and one on the bottom. The boards need to be in the middle of the rungs. Make a bottom box (it is necessary for the stability of the construction, and to fix the inventory in the cells). At the ends of the box and the grid are nailed to the supports, boards of height 70 centimeters.

If you are too lazy to make a stand, you can buy it: plastic stands for storing tools with long handles of different diameters are sold in many stores for gardeners.

Some people use inverted beer crates and put shovels, pitchforks, etc.д.

All of these racks do not take up much space, but they do take up some space. This is why many users of our portal prefer another approach to storage of shovels and planespades: when no special space is created, but the existing walls and ceiling are used. For this purpose, holes are made in all cuttings and strings are tied to hang them on the nails under the ceiling, special semi-circular devices are nailed to the walls to store hoses and extension cords, etc.п.

I recommend to master not only the floor surfaces, but if possible, hang the tools on the walls. The block is very convenient to lift bicycles during storage, you can also hang chain saws, garden vacuum cleaners, gasoline and electric trimmers on various hooks.

TigraOSP figured out how to store a gasoline trimmer, a thing “quite horny in storage”. On the solution it hit the device shelf in the store: there should be such a ledge of two “rods” with a semicircle on the end, like a grasp for a Russian stove under the pig-iron. Hanger in the form of a tackle was welded to the size of the trimmer for grass, put it in a rubber hose to avoid scratches on the trimmer and nailed almost to the ceiling.

Hanging and not noticeable, just cool. Walk up, grab the shaft, lift it, take it out of the grip and there you have it.

We show you a few examples of countermeasures to the chaos of keeping garden tools in excellent condition for a long time, implemented by the users of our portal.

Pirmid built a shed and took out in it this special section with a separate entrance for shanty tools and other garden stuff. “After a vain attempt to get a pitchfork out of the intertwined pile, this design was born.”.

Na zzz also set up a small room for storing garden tools and equipment. Staples bought at the hardware store, the bars, hooks, and drawers at the hardware store. Now storing shovels in the shed on a hanger looks like this:

Here’s another inspiring example. a rack for shovels and rakes:

FORUMHOUSE user Limmpopo offers this way to store inventory: all garden “tools” are standing on a string in special niches made of PVC pipes.

Everyone liked the idea: it’s simple, but so beautiful! But it’s not that convenient. To insert a shovel or a rake into such a rack, they must be raised almost to the ceiling. FORUMHOUSE has improved this know-how: a cut is made in the side of the pipe, which allows inserting tools with handles on shafts into niches. You can make something like a clasp: cut a strip out of a plastic bottle, fix one side of it firmly to the wall, and make a hole in the other. You put a tool against the wall and “fasten the hinge in the nail on the second wall”.

Another idea for absolute pedants: to make a notch at the bottom, limiters of the sewer diameter of 50 millimeters, and put the tools not upside down, and a working edge down. Then exactly as a string, they will stand not only in the picture but in reality. By the way, you can try to make such racks from plastic bottles.

Here’s how else you can store in the cottage any garden tools on long handles. The simplest handmade rack: two brackets, tied to one of them with a string with a nail on the end. an invention of Anna Sokolova. Tools stand neatly in the corner, don’t get tangled underfoot, and are easily retrieved as needed. And best of all, they take up very little space!

Small gardening tools are conveniently stored in such bags:

Or hang them on metal slats with hooks (they are more reliable and cheaper than plastic racks).

And here. just an ingenious design idea: small garden tools, all these shovels and rippers are suspended by the teeth of the old rake, which, in turn, hangs on a nail hammered into the wall.

In general, the system of storage of garden tools is very dependent on the room. It’s one thing if you have at your disposal half of the garage or a specially built for the purpose hovel, and another thing if all you and your tools have is a meter by meter corner under the stairs. “First the room, then the putting in of beauty and convenience in the arrangement of such buckets, shovels, forks, rakes, etc., as we need.д.”. they say on FORUMHOUSE. So, Stella777 for storage of tools has a separate room. an extension of the kitchen, but with a separate entrance. Stella777 she covered the walls with clapboard, varnished, bought in construction stores hooks and shelves and now has “order and free approach to tools.

One more important point: before putting a tool in its place most of FORUMHOUSE users clean it or wash it. If you clean the shovel even after simply digging over the ground, wash the flatbed under the faucet or in a bucket of water, over time you will develop a wonderful habit of keeping your working tool in order.

We offer you our article about unusual, but effective garden tools, a video about new products on the market of garden tools, a discussion on “A necessary set of garden tools: what to choose”.

Garage Affairs. Step 7. The rack under the wheels DRIVE2

Racks for wheels.At the beginning of my blog I want to write that the rack does not meet the standards for storing wheels. And yes, yes, yes I have seen that picture:

Personally, I don’t think this is entirely true if the wheels are stored seasonally rather than lying in storage for years. I came to this conclusion from my personal experience of rubber storage.

Storing wheels with rims standing up is not recommended because what? Because it’s going to warp the tires or something? If so, then how do you explain why they are not deformed when cars are seasonally parked in garages for a whole winter, or even longer? And many cars are parked this way. And in this case, the wheels are pressed not only by the weight of the tires and disks, but also by the weight of the car. Perhaps I do not understand, then write on the merits of the issue, and do not just throw a picture that I gave above the text.Sorry for such an emotional start, but in another, similar blog, where a man shared his idea of racking it everyone began to teach him, and nothing to substantiate his words except this proverbial picture.

In general, I made a shelf as made for was limited in funds and usable garage space. over, the disadvantages of such storage is not found significant. To hang wheels on the wall is certainly good, but in my opinion it is not a luxury in a small garage. About the disadvantages of stacking I’ll write below.And now, actually about the shelf.

In every garage must be a regular place to store rubber or complete wheels.I used to have a set of tires and castings just lying in the corner stacked.

And after buying another set of such stacks there were two. Takes up a lot of space, and in general interfere. Plus, in the corners, where the wheels are stagnant for air and therefore there and then formed a moisture, which you know, is not good.

Again, of course we can argue a lot, how and where to store wheels right, but I have a lot of space in the garage is not much, and I decided to do shelving, which serves its function and the place did not take much. I decided to make it out of bars bought at the store “level”

Drawing in my head and on a piece of paper the design of the rack, went to work.

First on the first sawed four identical bars for the frame (vertical).

Marked and made cuts in them with an electric jigsaw.

I sawed some horizontal bars and started to assemble.

Fastened the bars to each other with screws, pre-drilled holes with a thin drill.

Already the appearance of the shelf is being designed:

I made diagonal crosspieces to strengthen the construction in the sides:

4 pieces

To fasten the obtained result I reinforced the whole structure with bumpers.

It fits right under the shelf. Accordingly, it is exactly a set of rubber included.

On the middle shelf put a sheet of OSB and here is another very roomy and functional shelf.

Garage Business. Stage 1.Garage chores. Stage 2.Garage Business. Step 3.Garage business. Step 4.Garage business. Stage 5 Shelves in the garage.

Garage chores stage 6. Bench to the garage:. Bench to the garage part 1. Bench to the garage part 2. Fastening of a table top.- Garage workbench part 3. Tool screen

Garage cases. Stage 7. Wheel rack.Garage Affairs Part 8. Garage Curtain.

Lawnmower wall hanging for storage.

To store the mower on the wall, we made a suspension of two metal plates approximately 50 cm long. each. The lawnmower was lying on the floor and exactly in “place” the strips were bent. The strips are bolted together. The hanger itself is attached to the wall with two anchor bolts. On the upper ends of the strips were put on tubes, the ends of which were tightened by pull rivets through the washers. On the handle of the lawnmower installed two pieces, cut to fit, rubber hose and wrapped with electrical tape, preventing the paint on the handle. On the wall a rubber plate was fitted, in order to prevent the mower’s tank from damaging the wall.

At the end of the series of articles about brushcutters, we decided to move a little away from the issues of their selection and direct operation and tell you about how to store gasoline grass trimmer and other types of mowers in the off-season, as well as how to properly care for them in between mowing. These recommendations will substantially increase the life of the machine and reduce the possibility of breakdowns.

General recommendations

Part of the recommendations for the correct care and storage are common to all brushcutters. regardless of the type of motor and power supply:

• Store your power tool in a clean and dry environment.
• Optimal storage is vertically on the wall. The T-handle can be easily folded for convenience and compactness.
• Keep cooling system, ribs and openings clean.
• Always clean the cutting attachment after use.
• Sharpening metal blades regularly. before the start of the season and before every fourth mowing. A good sharpening system reduces stress on the engine.
• Check that your blades are properly balanced. Sharpening should only be carried out by authorized authorized STIHL service centers.
• Use only the mowing attachments recommended for your grasshopper model. “STIHL always indicates which attachments are compatible with the machine. This avoids overloading the engine and control electronics.

And now about peculiarities, peculiar to certain types of equipment in details.

How to store and care for your lawnmower

• Prepare the fuel mixture correctly. For STIHL brushcutters, the optimum ratio of gasoline to oil is 1:50.
• The shelf life of the ready-to-use fuel mixture. no more than 30 days from the time of preparation, while observing all storage conditions.
• Before storing your petrol grass trimmer in the Autumn/Winter season, be sure to empty the fuel tank and let it dry.
• Check the condition of the spark plug. Its electrodes must be free of soot and traces of oxidation.
• It is recommended that the entire tool be thoroughly cleaned before storage to avoid corrosion.

Rules for storing electric trimmers

• Take care of electric mowers only when the engine is off and the power cable is unplugged.
• Check cable integrity periodically. Do not postpone repair or replacement if necessary. Pay special attention to kinks or pinching points.
• No dust or moisture should enter the power tool or its interior, neither during operation nor during storage. Consequently, it is advisable to store the electric grass trimmer in a dry, ventilated place.

Storage and care of cordless trimmers

STIHL battery packs can be charged and discharged more than 1000 complete charge/discharge cycles without any loss of capacity if stored and used properly. To extend its service life, we recommend the following recommendations:

• Batteries can be used with other battery-powered equipment even in winter (they heat up during operation), but store it only in a warm room, since storage in the cold leads to hypothermia and a reduced service life.
• If a battery is frozen, gradually warm it up by simply bringing it inside the house or apartment. Never leave the battery on a radiator or other heating device to warm up.
• To reduce the risk of moisture (water or condensation) corrosion on the contacts, do not leave the battery connected for long periods of non-use.
• Do not allow water to get into the open battery compartment. Connecting the battery again could short-circuit and damage both the electronics and the battery.

One more important point to remember.

STIHL service

We recommend servicing the brushcutter twice a year. before starting work (about April) and before putting it into storage (October). Service by authorized dealers and an annual “Service Campaign” is offered during the off-season months with the possibility of free service for selected models including STIHL brushcutters.

Wall bracket for storing the lawnmower.

To store the mower on the wall was made from two metal plates, a length of about 50 cm. each. lawnmower was lying on the floor and specifically on the “place” strips were bent. The strips are bolted together. The hanger itself is fastened to the wall with two anchor bolts. Tubes were put on the upper ends of the strips, the ends of which were tightened with draw rivets through washers. On the handle of the lawnmower there were two pieces, cut to fit, of rubber hose and wrapped with duct tape, preventing the paint on the handle from peeling off. A rubber plate is mounted on the wall to prevent the mower’s tank from damaging the wall.

At the end of the series of articles on brushcutters we decided to digress a bit from the issues of their selection and direct operation and talk about how to store petrol grass trimmers and other types of mowers in the off-season, as well as how to properly care for them in between mowing. Compliance with these recommendations will significantly increase the life of the equipment and reduce the likelihood of breakage.

General recommendations

Some recommendations on how to properly maintain and store your brushcutter are common to all brushcutters. Regardless of engine or power supply:

• Store the tool in a clean, dry place.
• Optimal storage is vertically on the wall. For convenience and compactness, the T-handle can easily be folded away.
• Keep the cooling system. ribs and openings. clean.
• Always clean the cutting attachment after use.
• Metal blades should be sharpened regularly. before the start of the season and before every fourth mowing. High-quality sharpening reduces the load on the motor.
• The blades should also be balanced. Resharpening and sharpening is carried out by authorized resharpening centers.
• Use only the mowing attachment recommended for your model. “STIHL always specifies the attachments a machine can be used with. This avoids excessive strain on the motor and control electronics.

Well now about the peculiarities peculiar to certain types of equipment in a little more detail.

How to store and care for your lawnmower

• Properly prepare the fuel mix. For STIHL brushcutters the recommended ratio of gasoline to oil is 1:50.
• If the fuel mix is ready to be mixed, it should be stored for no longer than 30 days under normal storage conditions.
• Before you remove the gasoline grass trimmer for storage in the fall and winter, be sure to empty the fuel tank and let it dry out.
• Check condition of spark plug. Its electrodes must be free of soot and traces of oxidation.
• Before storage, it is recommended to thoroughly clean the entire tool to avoid corrosion.

Rules for storing electric trimmers

• Use and care for your electric mower only when the engine is off and the power cable is unplugged.
• Periodically check the integrity of the cable. Do not put off repairing or replacing it if necessary. Pay special attention to kinks or pinching points.
• Do not allow water or dust to get on the housing or into the power tool during operation or storage. The electric grass trimmer should therefore be stored in a dry, ventilated place.

Storage and care of cordless trimmers

STIHL batteries can go over 1000 charge/discharge cycles with no loss of capacity if stored and used properly. To extend its service life, we recommend the following recommendations:

• Can be used with other battery packs even in winter (they become warm during operation), but should only be stored indoors if warm, because storing them in freezing temperatures will result in supercooling and shorter lifespan.
• If the battery is frozen, warm it gradually by simply bringing it into the house or apartment. Never leave the battery on the radiator or other heating equipment to warm up.
• Do not leave the battery connected for long periods of standstill to prevent moisture (water or condensation) from corroding the contacts.
• Do not allow water to enter the open socket. Connecting a battery again could short-circuit the battery and damage both the electronics and the battery.

One more important thing to remember.

STIHL Service

We recommend that you service the brushcutter twice a year, before starting work (in about April) and before putting it into storage (in October). Service is carried out at authorized dealers and an annual “Service Campaign” is held in the off-season (during these months). certain models, including STIHL brushcutters, are serviced free of charge.

Wall systems for tool storage

The garage or workshop has a lot of different tools, inventory. If you do not think through the storage system, it is not so easy to find the right item. In order to get the perfect order in the garage and save time spent looking for a particular tool, you need to gather all the necessary items in one convenient area. The wall-mounted tool system is ideal for this. Thanks to this arrangement of tools in the room is littered, freeing up useful space. All the necessary tools are placed in plain sight.

Top tool storage ideas

Since tools come in long and short, large and small, and different shapes, so do the ways in which they are stored. There are several methodologies for organizing tools. Below are the most convenient and popular of those that you can make your own hands directly on the wall.

Vertical storage systems like shelving

One type of vertical tool storage is a shelving system. Racks should be used to place the most necessary tools that can be placed in close proximity. Items that are needed less often are stowed away on distant racks on the upper or lower shelves. Metal shelves for the garage. the IF system. are perfect for this.

But even with a large selection of options offers will not always meet the necessary needs of the owner of the garage. That’s why it is recommended to combine shelving units with holders and shelves you make yourself, or to construct a complete wall-mounted storage system yourself.

Very convenient self-made vertical racks made of wood with slots to store wrenches, screwdrivers. On them you can easily place adapter sleeves for fixing tools with conical shank of different sizes or pliers.

A vertical rack as a mobile stand is a great choice for storing tools at hand. It is recommended to make it out of wood or plywood. Individual groups of tools are placed on hooks, magnets or shelves. Often use special peopanels for a vertical storage system.

Magnetic strip

Magnetic tape is simple and easy to use. Take magnetic strips for attaching tools and mount them to a wall-mounted storage system. A wide variety of tools can be attached to the tape, from small metal wrenches and screwdrivers to large objects.

Plastic containers

Even the smallest items can easily be stored by assembling the system from small containers. They can be used to store:

The most affordable way is to use plastic bottles of different sizes or plastic containers, as well as small glass jars. Containers can be arranged on a vertical system on shelves or attached directly to the wall to save space.

Plastic opaque canisters with the tops cut off will also work. If desired, they can be signed or numbered.

Organizers

To store small parts and items can easily be constructed with their own hands organizer:

• Take any drawer from an old unnecessary table and make a lot of small partitions inside it from cardboard or plywood. Thanks to the separate cells, all the small necessary parts will always be in their place, sorted by set.
• If you make the organizer yourself, you need to take a piece of polystyrene. it will be the bottom of the organizer, and for the walls and dividers. PVC (glue it to the bottom), for the cover you can use transparent plastic or glass.
• It is easy and fast to make an organizer for screwdrivers. It can be made according to the instructions in p. 1 or 2. And you can drill holes in a bar of wood or foam plastic of the right diameters, then attach it to the wall and insert screwdrivers in the holes. All items will be visible and will not get lost.
• Another version of the organizer is assembled from cans of different sizes. Tin cans are quickly and firmly attached to the vertical wall in any convenient position, and filled with either small parts or tools.

Garden tool rack

Gardening tools always take up a lot of space, cluttering up aisles. This can be avoided by choosing one of the walls of the garage or workshop and converting it for the storage of garden tools. It is recommended to use regular PVC pipes to create a storage system, make them into holders for the size of garden tools and other things:

There are very simple options for attaching tools in the garage:

• Tool trolleys for garden tools. They are made from ordinary wooden pallets. Lean it against the wall with the bottom and fix it with screws, nail strips of any size to the sides.
• Another simple way. the usual strong and reliable wooden or metal hooks along the wall, where you can hang tools, extensions of different sizes. Stronger brackets and shelves can be used to store wheels, tires, inflatable boat.