How To Insert A Drill Into A Screwdriver Video

How to use a screwdriver?

It often happens that you cannot do without a screwdriver. The screwdriver is an indispensable assistant in the manufacture of a false ceiling, installation of drywall. Repair work is complicated if you do not have a screwdriver at hand with which you can easily tighten screws and fasteners. In the household sphere, it is in demand no less than in professional activity.

How To Insert A Drill Into A Screwdriver

  • How to unscrew a chuck on a screwdriver
  • How to charge a screwdriver
  • Screwdriver bits: which are better
  • How to remove a drill from a hammer drill
  • Choosing the right drill driver

However, not all tool owners know how to use a screwdriver correctly. There is nothing difficult in this, the main thing is to adhere to some rules and recommendations for beginners.

How to work with a screwdriver

After completing all the settings, you can start using the power tool. Having studied the operating instructions of the screwdriver, you can prevent possible malfunctions during the handling of the device, thereby increasing the service life of the tool.

It is not allowed to adjust the frequency and direction of rotation of the nozzle when the device is on. Do not touch grounded objects with the power tool, otherwise a person may get an electric shock. Do not use the device for a long time, as it may burn out.

The room in which it is best to use the screwdriver should be well lit, and the power supply constant, without surges, this will avoid equipment malfunctions. Work should take place in specialized clothing and only with serviceable tools.

How to change / insert / pull out the nozzle (bit), drill

After the desired nozzle (bit) for the drill has been selected, taking into account the size of the screw head and the configuration of the recesses (straight, cross), it must be installed in the very center between the open cams, and fixed in the chuck by turning the sleeve clockwise. If a key type chuck is selected, then the key is installed in the recess on the chuck, and then rotated hourly until the attachment is secured. The end of the bit fits into the groove in the screw. Before starting the device, check the accuracy of setting the direction of rotation, the direction should match the screw.

Increasing the pressure on the start button regulates the optimum rotation speed. When the screw is fully immersed, the force limiting mechanic is activated and then the drill stops.

Can a drill be used as a screwdriver

The screwdriver can also be used as a drill. The chuck mechanism makes it possible to firmly fix the drill with a cylindrical tail. To get started, you need to install a drill in the chuck.

Be careful, as the structure is not designed for making holes, especially for hard wood, metal or concrete, because there is a high probability of failure of the planetary gear.

What does a screwdriver consist of? Device setup.

In the plastic case there is an engine and a gear mechanism that drives the bit, which is installed at the end of the screwdriver. The device is provided with a start toggle switch, a direction and speed switch, a diode illumination and a puff time regulator.

The operating principle of the tool is very simple. The nozzle, previously fixed in the chuck, moves with the help of the shaft, which starts to move from the operation of the motor through the gearbox. Before using the screwdriver, you should find out if the battery is charged and if the correct attachment is installed.

Immediately before doing the work, you need to look after such a nozzle so that it matches the head of a self-tapping screw or screw.

To install the desired nozzle, you should select it according to the size of the head of the fastener element and fix it in the magnetic chuck holder. First, the cartridge with the coupling must be removed from the device, and after fixing the bit, the cartridge must again be fixed to the screwdriver body.

Then you need to assign a suitable bit rate. The adjustment is carried out using a special regulator. The required mode is set in the off state of the instrument.

Before using the power tool, it is necessary to correct the screw-in depth of the fastening element. After some time, it may be necessary to replace the magnetic holder. To change it, the cartridge, magnetic mount and coupling are removed. Next, the cartridge with the coupling is fixed back into the screwdriver block housing.

Tool types: characteristic features

The screwdriver can be classified into the following varieties:

  1. Drill driver
  2. Wrench
  3. Cordless screwdriver
  4. Standard screwdriver
READ  Using Bosch Diamond Drill

The principle of operation of the tools is similar to each other, but there are still differences in functionality.

The drill-driver is able not only to tighten the screw, but also to drill a hole. The impact wrench is specialized in bolts and nuts. The third representative is a cordless screwdriver, designed exclusively for tightening / unscrewing fasteners with a cross head. The latter type is characterized by low power, in contrast to the above.

Tips on how to use a screwdriver correctly

A screwdriver is a tool designed to tighten fasteners. If you have drills and special attachments, it can also be used to perform some other operations.

Mounting device. Non-combat cartridge

The chuck is the fastener in which the drill is fixed. The fasteners themselves are screwed onto the tool spindle. Most often, drills are equipped with a jaw chuck. This design is a hollow cylinder with metal “fingers” inside. When turning the adjusting ring, which is located outside the assembly, the “fingers” converge or diverge along the inner cone-shaped surface. In such a “fist” you can clamp both a drill with a cylindrical shank and a hex.

Convenience and ease of use have made the cam mechanism popular. However, it is not without its drawbacks. One is the difficulty of working with small drills. A short piece can simply fall inward. You can still fix it by placing the drill in a horizontal position, but you cannot press on it hard during work. If another drill has been inserted into the drill, it can be removed by turning the adjusting ring in the appropriate direction. It is not always possible to do this manually; for this there is a special key that acts like a lever, increasing the effort. By the way, tightening the drill without a key is also not recommended. The larger the drill diameter, the more reliable the fastening should be.

When buying fasteners, make sure that it is rubberized. So you will less injure your hands when fastening the tool.

Keyless fasteners, the second most popular, can be operated without a key. It is enough to insert the drill and turn the lever, often this can be done with one hand. The fixation of the drill, which this type of chuck provides, is quite enough for most jobs, however, compared to the classic version of the fastening, it is inferior in reliability, and it costs more. The main advantage of the quick-clamping fastening is the speed of changing the drill and the safety of the process, since such a chuck is devoid of teeth that can injure hands. The absence of a specialized key is also a significant advantage! Seasoned builders know how easily it is lost, so very often you can see the key tied with tape or electrical tape to the wire.

True, this does not add convenience, but there is at least some confidence that the key will not have to be looked for throughout the construction site. How to change a drill in a screwdriver? The scheme is absolutely identical. The chucks for most drills are similar to the fasteners on screwdrivers. Of course, the last tool cannot be a full-fledged replacement for a high-quality drill, if only because fasteners are not provided for drills with a large diameter, and the speed of a screwdriver is usually less.

How to use a screwdriver?

It often happens that you cannot do without a screwdriver. The screwdriver is an indispensable assistant in the manufacture of a false ceiling, installation of drywall. Repair work is complicated if you do not have a screwdriver at hand with which you can easily tighten screws and fasteners. In the household sphere, it is in demand no less than in professional activity.

However, not all tool owners know how to use a screwdriver correctly. There is nothing difficult in this, the main thing is to adhere to some rules and recommendations for beginners.

Can a drill be used as a screwdriver

The screwdriver can also be used as a drill. The chuck mechanism makes it possible to firmly fix the drill with a cylindrical tail. To get started, you need to install a drill in the chuck.

Be careful, as the structure is not designed for making holes, especially for hard wood, metal or concrete, because there is a high probability of failure of the planetary gear.

For newbies

So let’s start with the simplest case. Inexperienced users. Screwdrivers have such a thing as a torque regulator. It looks like a scale around the front with a screwdriver, which is right behind the chuck. It has numbers from 1 to 10, 15, 20 or even more. Different models have different numbers. And the last position on it is indicated as a drill. If you rotate this regulator and set it opposite a special mark so that one of the numbers is next to it, then when a certain torque is reached, the cartridge will not rotate further, but will begin to click. If you put on the “drill”, then the screwdriver will try to twist with all its might, as much as the engine power allows.

True, it is worth noting that in two-speed screwdrivers at second speed, even in the “drill” position, if the torque reaches a certain value, then a protective system is triggered, which simply turns off the current supply. At the first speed, the screwdriver will also try to turn “to the last”.

READ  Alteration Cordless Screwdriver In Network

And a beginner can start drilling or screwing self-tapping screws, for example, when the torque regulator is on one of the numbers, or the screwdriver is at the second speed (and it is recommended to drill on it).

The drill, on the other hand, can jam quite tightly, and as a result, when you start to release the drill or bit in the standard way (turning on the reverse, holding the chuck and pressing the start button), either the torque limiter or the protective system can just work.

Therefore, in such a situation, you just need to put the screwdriver at the first speed and set the torque regulator to the “drill” position. On single-speed models, just set the torque adjuster to the drill position. Well, then again, we unscrew it in the standard way.

How to remove a drill from a screwdriver?

How to create the optimal set of drills?

The drill is intended for making holes in a layer of any material and enlarging, reaming of existing holes. Basically it is a tool with a rotary cutting motion and an axial feed motion. It has many varieties and copes well with many tasks not only in everyday life, but also at an industrial level. In order to create an optimal set of drills, you should not purchase the entire assortment. You just need to decide what type of work is to be done.

The main choice is to choose the right drill, not only in size, but also for the purpose. Therefore, the material in which the hole is supposed to be made matters. Namely:

  • If you have to work with wood, then it is worth using special drills for wood. Spiral, flat and ring tools can be used here. A twist drill can create a hole 8–28 mm in diameter and 300–600 mm deep. This is the most common type of drill. To make a blind hole up to 10 mm in diameter, use a flat drill, and to drill wide recesses with neat edges use an annular.
  • To make holes in soft materials that lend themselves to the blade of a knife (drywall, plastic, softwood), use feather drills. Such a tool cannot be used to drill out existing holes.
  • To drill metal, cast iron, cermets, you will need a more durable option. Twist drills, the head of which is made of high-speed or alloy steel, will help here; two helical grooves pass along their shaft, forming cutting edges.
  • If a brick has come to hand, in which it is necessary to make a couple of holes, then special drills with soldered tungsten or cobalt hard alloy will come to the rescue, the so-called “win”. They can also be used when working with concrete.
  • For working with granite, winder drills with a stronger head are used than for drilling concrete. These can be plates of medium and high hardness.
  • You can make a hole in a tile or glass using a special tool. This is a drill with a diamond or victorious head. The diamond tool will take longer to work, but the glass / tile is less likely to break. The victorious drill does the job faster, although it leaves the chance of material splitting errors.

The appearance of the cutting tool can influence the final choice. A quality drill has no dents, scratches, chips or other visible defects. The cutting edges of the tool must be sharpened and evenly colored. The color of the core is of particular importance, it can be used to determine how the drill was processed:

  1. A gray-steel color indicates that no hardening treatment has been carried out;
  2. Black color indicates that the tool has been treated with superheated steam;
  3. Golden. Vacation takes place here to relieve the internal stress of the metal;
  4. Bright gold color indicates that a protective layer of titanium nitride is applied to the drill.

The degree of processing affects the strength, durability and cost of drills. If you plan to use them often, then it is better to purchase better quality and more expensive drills. You should not buy them from little-known manufacturers who are not able to guarantee quality. Choose wisely and your tools will last you long.

Correct use of the screwdriver drill

A screwdriver is a tool that is designed to tighten and unscrew fasteners: screws, screws, self-tapping screws, dowels, etc. In order to work with screws, self-tapping screws and screws, bits, special nozzles with the necessary stings are inserted into the screwdriver chuck. Also used for drilling holes. One of the useful options of a modern screwdriver is the hammer drilling mode, in which you can make holes in concrete and ceramics. For these purposes, it is better to take a drill screwdriver.

The main difference between a screwdriver and a drill-screwdriver is that the first tool is designed to perform serial work on tightening and unscrewing fasteners. It can be used as a drill, but it is not recommended. Drills for screwdrivers are not even listed in the standard tooling. This is due to the fact that the design of the screwdriver does not imply a drilling function. The hexagonal socket for the screwdriver is only suitable for hexagonal drills.

READ  Makita Puncher How to Insert a Drill

Technical characteristics also indicate the irrationality of its use as a drill. A mains-powered screwdriver has a high speed. It’s good for fasteners. And this is a disadvantage when drilling, since it is often impossible to limit or somehow control the rotation speed. The cumbersome size of this tool is also more a disadvantage than an advantage in working with it.

The screwdriver is almost a universal tool. The functions with which it copes are much more than that of a conventional screwdriver. In this version, speed control is already present. The drill / driver is equipped with a keyless chuck instead of a hex socket, which makes it much easier to change attachments, be it bits or drills. The chuck is an important element in any screwdriver, it can be matched to the required functions.

Keyless chucks (BZP) allow you to change drills and bits for a screwdriver without using additional tools. This is possible thanks to the design of the cartridges. They are single-sleeve, when you can change the bit with one hand, while a special mechanism locks the shaft for the time of rigging, and double-sleeve. Replacement is carried out with two hands: one hand must hold the sleeve, and the other is twisted / twisted the nozzle.

BZP are plastic and metal. When using plastic holders, you can make your work easier, that is, reduce the weight of the power tool itself. But plastic is inferior in strength and durability to metal, especially if you use the shock mode. But both of these options are great for everyday use and more professional types of work.

Drill set or size matters!

Almost every home has a drill and a minimal set of drills. Hanging a painting, a bookshelf, or any such feat without a drill is difficult. Therefore, any self-respecting man has worked with a drill at least once.

Features of operation: how to insert a drill into a hammer drill and into a drill

Have you started renovation or construction? Then you can’t do without a punch. The hammer drill is a multifunctional punching tool, it performs rotary impact, non-rotational impact, non-impact rotation, drilling in concrete, metal and wood, the functions of a jackhammer. Working with a hammer drill requires knowledge of the tool and its elements. The drill is one of the removable elements. Awareness of how to insert a drill into a hammer drill can not only protect a tool from breakage, but also a person from injury.

For everything to go smoothly, there are only a few guidelines to follow:

  • Before installing the drill, it is necessary to check the functionality of the tool. You need to connect it to the network in the drilling mode without impacts, and if a uniform sound is heard after starting, you can start working.
  • The drill is inserted into the chuck. Therefore, first you need to choose the right cartridge. It is better to use keyless chucks that come with this rotary hammer or choose tools compatible with this model.
  • In order to reduce wear, the rotary hammer can be lubricated with a special grease. A small amount of grease from the tube should be squeezed into the hole for the cartridge. Further, resting the tool with the handle on the floor, you need to pull back the lower part of the “head” of the punch, insert the cartridge and return the “head” back.
  • The drill is inserted. It is necessary to turn the upper part of the chuck clockwise until it stops. Check that the drill does not wobble. Test performance: turn on the network and press start several times.

If you need to carry out less complex tasks: hang a shelf in the bathroom or a painting, an electric drill will be enough. An electric drill can be found in almost every home, as it is a very useful thing in everyday life. But no matter how simple the tool is in its functions, the instructions for its operation must be followed, including the rules on how to insert the drill into the drill.

There are just a few steps to remember:

  1. The first step is to secure ourselves and disconnect the electric drill from the network.
  2. The drill switch must be in the “Off” mode.
  3. It is necessary to open the cartridge by unscrewing it counterclockwise, holding the back of the cartridge with one hand.
  4. The drill is inserted into the open chuck until it stops. The cartridge should be closed, for which you need to rotate the front part clockwise while holding the back part. If the drill is equipped with a special lock, a characteristic click will be heard. If there is no such lock, rotate until the drill is firmly fixed.

When working with such power tools, you must adhere to safety rules, do not forget to wear glasses, gloves and ear plugs. It is recommended to wear special clothing to perform work with a puncher. You should adhere to the rules for using the tools specified in the instructions, and perform only those tasks for which this or that equipment is intended.