How to Insert a Fishing Line into a Trimmer
When spring comes, people often spend their free time in their summer cottage. With the onset of warm days, they try to rid their area of such problems as weeds and grass. It is difficult to do it manually, especially if the area is very large, so a lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds. This is a suitable device for mowing unnecessary plants near the fence, at home, between rows in the garden on a flower bed and so on. Read about how to choose a lawn mower that is right for your needs. The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element. A reel. But over time, the fishing line wears out and there is a need to replace it. The article will discuss how to refill fishing line in a lawn mower.
What kind of fishing line to choose to refuel the lawn mower
The thickness of the polyethylene yarn depends on the model of technology and varies from 1.2 to 4 mm. She may be:
- With a circular cross section is the most durable material for mowing herbaceous plants;
- With curly section. Used for mowing soft plants;
- Twisted. Used for thin grass;
- Professional type, not suitable for all models of equipment.
To change the line on the lawnmower, you need to purchase a cutting thread, which will be ideal for this or that type of mower.
You can soak the thread in a bowl of water for several minutes to increase elasticity and strength.
The device of the line in the mower
The arrangement of the element on which the kapron thread is wound is very simple. This element is called a coil. It has two “tracks”. The upper and lower. Between these paths there is a special partition with a recess. A fishing line is wound on these tracks. It must first be pulled through the recess.
To be able to pull out the coil without obstacles, you must unscrew the special button, which is located on the mower body.
Features of replacing fishing line on.
Replacement Instructions. How to Insert a Fishing Line
It should be noted that the coils in the mowers can be different:
- For functioning with one antennae;
- For functioning with two antennae;
- Fishing line should be threaded through the through hole that is located inside the element.
And do not confuse this part with an extension for a lawn mower on a reel, because despite the similar name they are two completely different elements.
The mini chainsaw is designed for simple jobs and for people who prefer to hold the device with one hand.
This article will tell you about how much the ZIL 130 dump truck weighs and what this transport is capable of.
Read here //machinspec.com/lesozagotovitelnaya/benzopila/stanok-dlya-zatochki.html how to assemble a machine for sharpening chains of chainsaws with your own hands quickly and easily.
In the first version, it is very simple to wind the cutting element:
- On the inside of the coil element there is a locking eye.
- One antennae of the thread is inserted into it.
- It is necessary to refill the kapron thread in the direction opposite to the rotation of the bobbin element.
- It will take only from 2 to 4 meters of fishing line. When the winding process is completed, put the small end of this cutting element out and fix it in the groove, which is necessary to fix the fishing line so that it does not unwind during the operation of the mower.
- If there is no special groove, then the end should be held by hand so that the cutting element does not untwist during further collection of the element.
- At the last stage, it is necessary to thread the outer end of the thread into a special hole located on the outer part of the element. After that, the coil can be inserted into the mower.
When the roller works with two ends of a polyethylene thread, then the following steps must be taken to fill the line into the mower:
- Inside, the reel will show how many recesses there are for winding (two or one). If there is one recess, then both ends of the thread will be laid along this recess. If there are two, then the antennae are laid out separately. Each in its recess.
- It is necessary to rewind from 2 to 4 meters of polyethylene thread and thread its two ends into the hole.
- Wind both threads in the same direction as the drum rotates.
- When all the fishing line is wound, the ends should be fixed in the grooves or held by hand.
- Both ends are threaded into the eye on the outside of the roller housing.
- After that, the drum is assembled and inserted into the mower.
Tips and steps for replacing fishing line on a.
To insert a fishing line into a lawn mower, in which the reel contains two grooves, you must use the previous version of refueling this polyethylene thread. In this case, each of the ends of the fishing line will be wound along its groove. All other actions are similar to the previous process.
The coil element or roller may have a completely different design than the previous two options. Fishing line can be threaded through the eye, which is through and located inside the reel. In this case, it is not necessary to disassemble the roller drum and manually wind the polyethylene thread.
The polyethylene thread is threaded through the hole and rotated by pressing a special button. This The button is located on the body and is intended for the operation of equipment, to be able to produce fishing line as it wears.
Do not worry that the polyethylene thread is wound in the wrong direction, since in this design it can spin in only one direction.
For quick and safe replacement of fishing line on the reel of the mower, safety precautions must be observed. Before removing the reel, in order to wind the line onto the lawn mower, it is necessary to disconnect the equipment from the power supply (if the mower is powered by electricity). Here I want to mention the reliability rating of electric lawn mowers, which will help you choose a safe assistant.
Another important safety rule that must be observed is pressing the lock button. You can find out its location on the equipment body using the instruction manual. For example, the manual for a gasoline mower can be found here.
Do not forget that the cutting element must be adjusted. There is a tuning button on the unit body. If the process does not start automatically and the thread tension loosens, then the button is clamped and the line is pulled out of the reel with force.
It must be remembered that replacing fishing line in a lawn mower is an important process that requires responsibility. It is necessary to carry out everything in stages, and only a special polyethylene fishing line should be inserted into the reel. An iron cable, some high-quality wire or even reinforced fishing line is not suitable here.
Watch the instruction.
If there is a summer cottage or a large plot of land near your individual house or cottage, then for the convenience of cleaning grass and weeds, you must use a lawn mower. If you are thinking of choosing an electric lawnmower or gasoline, then click here and you will find comparative characteristics of different models.
Over time, the line on the mower wears out and needs to be replaced. This can be done independently. Choosing this polyethylene thread is necessary depending on the model of the mower. It is also worth watching about the remaining details of the unit, here for example you will find information about the Craftsman lawn mower knives, which also wear out and can lead to irreversible consequences.
The reel device into which the fishing line is inserted is very simple. But it differs depending on whether the spool works with one or two thread antennae. It is important to observe safety precautions when replacing fishing line in the reel.