How to make a do-it-yourself blade for a walk-behind tractor

Features of the manufacture of a snow plow

Consider another option for making a shovel, which is not too different from the previous one. For the blade itself, you will need 3 mm steel sheet, and for the struts that provide additional rigidity, you need to take thicker steel. Holes must be made in the racks for attaching the shovel to the rods. It is very important to ensure vertical placement of attachments homemade equipment in relation to the front of the power unit.

  • shovel;
  • barbells;
  • bracket for attaching the rods to the walk-behind tractor;
  • thrust.

Tools and materials

To create a snow plow yourself, you will need:

  • steel sheet 850x700x3 mm;
  • 4 steel plates 450x230x3-4 mm;
  • iron strip 850x100x3 mm;
  • two eyelets for attaching rods;
  • 1 m of a square pipe with a section of 40×40 mm;
  • bolts М10, М12 and М8, as well as washers and nuts;
  • two rods 520 mm long;
  • a set of drills for metal;
  • pliers;
  • set of wrenches;
  • a sheet of thick durable rubber;
  • small but thick steel sheet;
  • angle grinder with discs for metal;
  • apparatus for electric welding;
  • hand electric drill.

The scheme of manufacturing a shovel blade for a walk-behind tractor

Homemade dump

Snow plows that can be installed on almost any type of equipment (tractors, ATVs, cars or walk-behind tractors) make life much easier and the process of removing snow drifts itself. Any snow plow consists directly of a working body, a steering angle adjustment mechanism and a fastener that fixes the shovel to the chassis of the power unit.

DIY snow plow for walk-behind tractor

Despite the fact that there are various modifications of factory devices for cleaning the fallen snow masses, however, according to the presented drawings, you can easily and independently make a snow shovel. Thanks to such attachments for the Neva walk-behind tractor, you can clear your site from snow drifts in winter, and use it the rest of the time for garbage collection, leveling earthen pads and much more. Despite various modifications, all plows are characterized by the same general design and principle of operation. The snow shovel has three main positions:

  • forward;
  • to the right with a slope of 30˚;
  • to the left with a slope of 30˚.

A self-made blade made from a gas cylinder or steel barrel must be turned 30˚ to the left or right before snow removal work. Having established the required angle, the shovel of the walk-behind tractor is fixed in the required position by means of metal cotter pins.

The width of the working grip is usually 1000 mm, provided that for the manufacture of a shovel, metal is 2-3 mm. True, some models may be more or less than this value. Industry makes snow shovels from high quality steel.

Blade installation

To install the grader, you will have to resort to using brackets mounted on the frame of the power unit being used. Additionally, the blade is attached to the walk-behind tractor by means of two rods, which, when inoperative, make it possible to unload the walk-behind tractors. The knife, made of steel plate 850x100x3 mm, is attached to the lower horizontal edge of the grader by means of a bolt connection.

Now, after the blade is ready, you need to install it and you can start clearing snow drifts, removing garbage or leveling the earthen area on your site. A do-it-yourself blade for a walk-behind tractor is a versatile equipment with which you can perform various works. And self-production will make it possible to get a multifunctional device adapted specifically to your needs.

In order for the motoblock blade to last as long as possible and resist corrosion, it should be treated with a special primer or protective paint. The rubber strip attached to the working edge of the shovel should protrude beyond the steel plate.

READ  How to Make Stihl Ms 180 Cold

Homemade snow shovel

To independently make a snow shovel for a single-axle tractor “Neva”, first, you need to collect the necessary tools and materials. So, we need:

Making Tiller Tines Out of Scrap Metal! DIY Rototiller Blades

  • an old steel barrel with a capacity of 200 liters;
  • a strip of iron with dimensions of approximately 850x100x3 mm;
  • 1 m of a square pipe with a section of 40×40 mm;
  • bolts М10, М12 and М8, as well as washers and nuts;
  • a set of drills for metal;
  • pliers;
  • set of wrenches;
  • a sheet of thick durable rubber;
  • small but thick steel sheet;
  • angle grinder with discs for metal;
  • welding machine;
  • hand electric drill.

After all the tools, materials and drawings have been collected, you can start making a do-it-yourself blade for the walk-behind tractor. The simplest solution would be to make a bucket from an old 200 liter barrel, since it initially has the optimal roundness. In this case, it is not necessary to heat the metal sheets and bend them, giving them the desired shape. So, you need an old barrel, from which you need to cut off the lid and bottom with an angle grinder. The resulting pipe should be cut lengthwise into three equal segments. These two thirds must be joined together along the contour using a welding machine, and the remaining third must be cut with an angle grinder into strips that will be used to ensure sufficient rigidity. Attach the shovels one strip at a time, and distribute several pieces evenly along the entire length of the blade.

Homemade snow plow design

Now, to further strengthen the entire structure of the blade, you need to make a knife at the bottom of the bucket. This will require an iron strip with dimensions of 850x100x3 mm. Using an electric drill, drill three holes with a diameter of 5-6 mm and a distance between them of 100-120 mm in the knife. This is to reinforce the rubber pad, which will prevent the bucket from damaging the road surface. The knife is attached to the working edge of the bucket using a bolt connection.

After assembling the snow shovel and blade, you need to make and install the blade mount. Weld a piece of pipe to a homemade motoblock blade in the center of the structure. In the middle of the pipe, by welding, fix a semicircle made of a thick sheet of metal and make several holes in it to set the required angles of rotation and fix the motoblock blade.

Next, you need to take another piece of square pipe and make an L-shaped holder out of it. The short side of this holder is installed in a pivoting semicircle, and the other end of the pipe is bolted to the frame of the power unit. To adjust the height of the blade, two bolts are used, screwed into the recess of a square pipe, which is welded to the hitch and is put on the L-shaped holder. The video shows a snow shovel for a walk-behind tractor and working with it.

How to make a homemade blade (shovel) for a uniaxial tractor. do it yourself

In Russia, there are such winters that very often the owners of private households are faced with the problem of removing a large amount of snow. Traditionally, this problem has been solved using conventional shovels and various tools. Now, when many farms have at least walk-behind tractors that can be equipped with various types of attachments, cleaning snow, garbage and other work has become much easier.

How to make a PLOW for a mini tractor. Homemade plow

As you can see, anyone who knows how to handle tools and an electric welding machine can independently create a snow plow from a barrel or a gas cylinder. There is nothing complicated in this, for this you only need the simplest drawings, of which there are plenty on the Internet, tools and materials available on the farm of almost any craftsman. In addition, this will make it possible to significantly save on the purchase of ready-made attachments. The video shows the installation and operation of the blade on a walk-behind tractor.

make, do-it-yourself, blade, walk-behind, tractor

Recommendations for creating a do-it-yourself blade for a walk-behind tractor

In our country, there are such winters that often the owners of individual households are faced with the difficulty of removing a huge amount of snow. Usually this problem was solved by means of ordinary shovels and all kinds of home-made devices. At the moment, when most farms have motor cultivators available that can be equipped with various types of attachments, snow cleaning, garbage collection and other work has become much easier. In the article we will look at how to create a do-it-yourself blade for a walk-behind tractor.

READ  We Make A Stationary From A Manual Circular

Shovel for a motor cultivator

Mouldboard shovels for motor cultivators can be equipped with a knife attachment, which is convenient for leveling the soil, as well as rubber attachments designed to eliminate the effects of snowfall. The choice of models of snow plows is extensive; when choosing such a hinged mechanism, you must definitely make sure that the structure can be mounted on an existing motor cultivator.

Manufacturers do not equip these devices for motoblocks with a device for damping (damping) or preventing vibrations (spring dampers), since due to the low speed of movement, special protection against contact with uneven soil is not needed. When equipping your rototiller with additional snow removal equipment, purchase specialized steel lugs.

Replacing pneumatic wheels with similar devices significantly increases the quality of snow cleaning.

Design features of the device

Snow shovels are effortlessly hung on any type of equipment, seriously speeding up and simplifying the procedure for clearing snow. All snow plow equipment for a multifunctional implement includes 3 basic parts: a snow shovel, a plow angle adjustment mechanism and a mounting module that holds the snow plow to the frame of the implement.

There are a number of designs of factory shovels that are part of the attachments, however, such a device for a walk-behind tractor can be built with your own hands, especially since there is a wide variety of information and drawings on this problem in the global network.

This makes it possible not only to manufacture equipment with the required characteristics, but also significantly save money.

The blade is an integral part of the attachments used in conjunction with a motor cultivator. With his support, you can facilitate such everyday work on your own plot of land as collecting garbage in the summer, in winter. clearing snow, in addition, leveling the surface layer of the earth and transporting it from one plot to another. Snow plows come in various variations, but in their total mass they are endowed with one principle of operation and design. They mainly have a number of standard working positions.

These are almost always the 3 points below:

  • straight;
  • to the left (with a turn of 30 °);
  • to the right (with a turn of 30 °).

Making a moldboard shovel from a gas cylinder

Another available tool for making a moldboard shovel is a gas cylinder. This event will certainly require a detailed diagram. It should indicate the parameters of the spare parts used and the procedure for assembling them into a single structure. Work on the creation takes place in the following order.

  • Release excessive pressure from the cylinder, if any.
  • Cut off both edges of the lid so that the width corresponds to one meter.
  • Cut the resulting pipe lengthwise into 2 halves.
  • Using a welding unit, connect these 2 segments so that the blade height is approximately 700 millimeters.
  • The holder for fastening is made as follows. Cut a kerchief out of thick iron. Make a number of holes in it to rotate the blade in different directions. Weld a piece of pipe to the kerchief.
  • Weld the prepared product to the snow plow at the level of the holder location on the walk-behind tractor.
  • Installation is carried out using a cylindrical rod.

The thickness of the walls of the cylinder is sufficient, there is no need for reinforcement. However, the bottom can be fitted with durable rubber that will remove loose snow and not damage the rolled road. To do this, you need to take hard rubber from the rotary. conveyor lines. The width of the rubber strip is 100×150 mm. Using an electric drill, make holes in the shovel to fix the rubber. To firmly fix the rubber strip, a 900x100x3 mm iron strip is needed. Drill holes in metal and rubber, marking in advance with a shovel. Secure with bolts.

How to create a snow plow from a barrel?

Making a shovel on your own is easy when you have a welding machine, an angle grinder and an electric drill in your home. Here’s one easy way. You do not need to search for the necessary material, since you can use a simple 200-liter iron barrel.

READ  How To Screw A Self Tapping Screw Without A Screwdriver

Carefully cut it into 3 slices and you will have 3 curved pieces for the snow plow. Having welded 2 of them along the contour mowing line, we get an element with an iron thickness of 3 mm, which is fully enough for the rigidity of the shovel. The lower segment of the shovel is reinforced with a knife. This will require a metal strip 5 mm thick and the same length as the blade grip. Holes are made in the knife with a caliber of 5-6 mm with an interval of 10-12 cm for mounting a protective rubber strip.

The mechanism for attaching the shovel to the cultivator is quite simple and can be done at home. A pipe with a cross-section in the form of a square 40×40 millimeters in size is cooked to a shovel, assembled from two parts of a barrel, approximately in the middle of its height for reinforcement. Then, in the middle of the pipe, a semicircle of thick iron is cooked, in which 3 holes are pre-made, required to stabilize the angles of rotation of the moldboard shovel.

Next, a bracket that looks like the letter “G” is welded from the same tube, one edge of which is placed in a hole in a semicircle, and the other is connected with bolts to the chassis of the unit.

To adjust the level of the blade lift, bolts are used that are screwed into the holes in a piece of tube welded to the hitch and put on the L-shaped bracket.

The principle of work with a snow plow for a walk-behind tractor

The mouldboard shovel of the walk-behind tractor must be properly installed before performing its functions. She turns with her hands to the right or to the left at an angle of up to 30 °. The process of adjusting the position ends by setting a suitable angle and fixing the shovel in the chosen position using cotter pins. The grip area of ​​a snow plow for a mobile power unit is usually one meter (some modifications may have different values) with a shovel material thickness of 2 to 3 mm. In an industrial environment, these devices are made from high quality steel.

make, do-it-yourself, blade, walk-behind, tractor

Sheet steel shovel

Some craftsmen prefer to use new material, rather than used elements. So you can assemble a homemade blade from an iron sheet with a thickness of 3 mm. To strengthen the device, you can use a steel strip with a thickness of at least 5 millimeters. Metal cutting is carried out according to the schemes. The blade itself contains 4 segments: front, bottom and 2 side. The assembled structure requires reinforcement. For this, components cut from metal with a thickness of 5 mm are welded vertically.

Then a rotary device is created. It is a lug with a hole for the axle. The eyelet is fixed by welding to the angle, which is attached to the shovel. The axis is fixed on one edge of the pipe, and with the other edge it is fixed on the walk-behind tractor. The required degree of rotation is fixed with a cylindrical rod (dowel). 3 millimeters is a small thickness, which means it needs to be strengthened. Cut a strip of 850x100x3 mm from a sheet with a thickness of 3 mm.

make, do-it-yourself, blade, walk-behind, tractor

You can fix it with bolts, but you will need to first drill or weld the strip by welding.

To carry out the work you will need:

  • sheet metal;
  • angle grinder with discs;
  • electric drill;
  • set of drills;
  • bolts with self-locking nuts (with plastic inserts);
  • welder with electrodes;
  • wrenches;
  • profile or round pipe.

If you have the necessary abilities, the job is not difficult. And the created device can be used not only in winter, but also in summer. Improve the site after completion of construction and installation work, plan a site for a children’s sandbox, and the like. What type of construction to choose is to make a decision for you.

How to make a blade-blade for the “Neva” MB-2 walk-behind tractor, see the video below.