How to make a hole in the wall with an electric screwdriver

7th April 2022

How to drill a concrete wall with an electric screwdriver?

Greetings! This article will talk about whether you can use an electric screwdriver to drill concrete. Sometimes it happens that you need to make a hole or a recess in the concrete, and apart from an electric screwdriver there is nothing at hand. You have to think about what to do with it. There are of course impact screwdrivers, but even they can not cope with the concrete. Brick at the most they can do.

Of course, I still recommend that you get a torch for such cases. Even with the cheapest one. You can make a hole in seconds. But if you need to do the job right here and now, you can try the following method. Truth for it besides an electric screwdriver and a drill bit two more things are required. a puncher and a hammer.

You can use an ordinary drill bit for metal. but after this work, it instantly blunted and to drill metal it will then have to sharpen. If your electric screwdriver is a hammer drill, you can use a brick drill bit with a carbide tipped tip.

How to drill?

It’s not an easy job and it requires a lot of effort. But it still gets the job done. That is, the work that the pioneer does on the fly, in this case you have to do by hand with a puncher.

If you work against the rebar, then change the place of drilling. Of course you can try to drill through the rebar with a metal drill bit, but it will be even more time consuming, so it is easier to change the place of drilling.

Drilling

Drilling in concrete is an uncomplicated process that requires just the right tool. When working with drills should be combined mode rebound with drilling.

If you are using core bits, the impact mode should be disabled. Can an electric electric screwdriver drill through a wall (brick) ? Katerina. The only possible problem during this process would be reinforcing frame rebar that might get in the way of the drill.

Before you drill through the reinforcement in the concrete, you must change the tip for working with concrete to a conventional drill bit for metal and drill through the obstacle. It is important not to forget to switch off the bumper mode before drilling through the reinforcement in the concrete.

In addition to the above, there are also a number of useful tips to help you achieve a quality result.

Unprofessional construction tools are not designed for a long load, which should be taken into account when working with them. The housing must not be allowed to overheat. on average, the period of uninterrupted operation of the equipment is no more than fifteen minutes, after which the mechanism requires cooling. The same fifteen minutes of inactivity will be quite enough;
When drilling, the drill gets very hot, and when it reaches a critical temperature, the pobedite tip begins to deform. To cool the drill, simply immerse the tip in water. the more often you perform this operation, the less the consumable will wear out;
If the drill is stuck, you should by no means try to twist it by increasing the speed. in the best case you will break the drill, and in the worst case you will destroy the tool itself. It is necessary to pull the tip out of the socket, charge a similar one and drill a hole next to it. only after that you can try to “free” the drill from captivity;

What you drill big holes with

Many people wonder whether an electric screwdriver can drill holes of different diameters. Can be made, but the tool must be fitted with additional accessories.

Crown (for metal work). A small circle of a specific diameter with sharp edges. A drill bit must be placed in the center to pierce the metal. A crown at low power makes a hole or hole of the desired diameter. During work the bit’s edges and material surface must be cooled.
Several steps. Here you need drill bits of different diameters, from smaller to larger. You should start with drills of small diameter, gradually increasing, depending on the width of the hole.
Fixture in the form of a cone.

The above methods are suitable for working with metal. But they can also be used with other materials if desired.

A drilling cone

How to prepare for work?

The first thing you will need to do in order to get to work is to take the electric screwdriver out of the case or suitcase and check if it has any visible damage, chips or cracks. If you notice that there is something wrong with the tool, you can not use it in any case, because it can be unsafe. Always make sure that the battery of the electric screwdriver is charged, or the electric screwdriver itself is plugged in. When these conditions are satisfied, turn the electric screwdriver on at idle speed and check the matching rotation of the nozzle and the threads on the fastener. If all conditions are met, you can safely start working.

Don’t forget to choose and properly fix the nozzle or drill bit depending on where and how you are going to work. How to fix them, we mentioned above, when we talked about changing the nozzle.

When using the appliance directly, there are also a number of simple rules and requirements to be met.

Pay close attention to the electric screwdriver itself. On it there is a special scale, by rotating which there is an opportunity to regulate the power of the tool. Set the mode you want by turning the dial according to the kind of work you are doing.

Switching between these tool options is quite simple and straightforward. Just hold the electric screwdriver by the handle above the battery pack. The handle is most often covered with a material that is rubberized. That is why this finished handle is safe to use and ensures that the electric screwdriver does not fall out while you are working. The tool is secured to the hand using the hand strap for greater safety.

Usage Options

To use an electric screwdriver correctly is to use it according to the instruction manual or set documentation. According to these documents, the main area of use is directly the ability to screw and unscrew various fasteners, as well as for drilling various holes.

Depending on the capabilities of this or that model, it can be used in both domestic and professional applications. Household screwdrivers are cheaper and have less power, while professional models have more power, high performance and more functionality to use.

But some users use an electric screwdriver, for example, for non-standard things like polishing a car, to stir mix or paint, to sand various surfaces, to twist wires, to bind fittings, and even to drill holes in ice.

Twisting wires

An electric screwdriver, which has a specific attachment, is excellent for twisting split ends of wires. Twisting is usually done with a pair of pliers, but those who wish to can use an electric screwdriver for this application. The main thing is to perform this tricky procedure correctly.

Tying rebar

An electric screwdriver can be used to bind fittings using steel wire. This is widespread in construction, when there is the erection of various reinforced concrete structures of houses and foundations. In order to knit, one takes a cordless or corded tool that has a hook attachment.

What to drill concrete with: tools, devices, tips

Choice of tool

If you are going to drill a hole in a concrete wall, you have to be properly prepared for the work. I advise to start with the choice of tool. In this situation, there are only two possible options. an impact drill or a torch. Naturally, the impact drill is the preferred solution, because the initial function of this tool is to pierce concrete or stone, to create holes of different diameters.

The feature of the tool is the ability to create large diameter holes, while a standard drill cannot cross the threshold of drilling holes with a diameter of more than twelve centimeters. If it comes to such a non-standard material such as foam concrete, it is worth giving preference to the drill, as the wall will be irreparably damaged if the impact on it peoratorom.

Impactless drill will be completely useless for such work, moreover, in the process the tool can be broken.

Of course, if drilling several holes is such a great need, then in the absence of a peorator you can do with a drill, which will allow you to drill a concrete wall with certain skills. However, if you are going to work for a long time, it is still worth buying the right tool.

Thus, you will save a lot of time and effort, because you do not have to spend a lot of time trying to drill a wall with a device that is not designed for such heavy loads. If you still had for some reason to use a drill, then it is worth remembering one feature of working with it. use only pobeditovye drill bit for concrete, in which the tip is covered with a spraying created on the basis of hard alloys.

There are craftsmen who know how to make a hole in concrete with an electric screwdriver. This is quite realistic if you choose a suitable tool, for example, Milwaukee 2604. With the proper skill, such a machine will provide you with both drilling with impact, and screwing. It is quite suitable for all sorts of small things, but to perform a large amount of work on concrete is not suitable.

Special devices

In specialized stores, you can find on sale special ring drills that have a diamond coating on the end. They are used for drills that are used to drill quite large holes, which can be as large as twenty-five centimeters in diameter. I immediately want to note that such devices are very expensive, so it makes absolutely no sense to buy them in order to drill walls at home.

In cases where the wall must be supplemented with a socket or switch during repair work, another variation of the tool is used. This is a drill bit that has a metal tipped tip around the circumference of its cutting edge. The diameter of the bits ranges from thirty to one hundred and twenty millimeters, but the standard size is sixty-eight millimeters.

The thing is that this size hole should be drilled in the wall in order to install a switch or socket. If you keep wondering what to drill through concrete with a drill bit, I’ll tell you that the ideal tool for this mission is a torch that has the impact mode turned off. If the wall to be treated is too thick, you can use special extender nozzles.

The crown itself can act as an attachment, but already for the drill. This kind has no tipping, but it is covered over the entire area with a spray consisting of a carbide-tungsten alloy. An additional advantage of this nozzle is that there is no need to change the tool in cases where you need to drill a wall tiled with ceramic tiles. All this is because such a nozzle perfectly passes, both tiles and concrete.

I want to note that this type of charging can be used only on those models of impact drill, the power of which is not below a thousand watts.

Often the work of the peorator is accompanied by the use of drills, the diameter of which can range from four to eighty millimeters. Many modern craftsmen are faced with the question of how to correctly select the appropriate drill diameter.

It is possible to avoid such a situation without much difficulty, because in order to then not to think about what to drill concrete with, you can immediately purchase a set of special drills when buying a penorator. Naturally, really high-quality kits, allowing for easy drilling concrete walls, are quite expensive, so I advise to buy a drill as needed according to the diameter of the dowels used.

Tips for drilling concrete

Before you drill, you need to do some manipulation with the tool. I advise to carefully check the drill chuck for dirt, which if found should be quickly removed using a piece of dry rags.

If you neglect this condition, then at the time you will be drilling, there may be various problems with the serviceability of the tool. When inserting the drill bit into the chuck, make sure it goes in at a right angle and the shank rests against the bottom of the chuck, otherwise the wall will remain untouched.

Indeed, the most serious problem that can present a concrete wall is finding the wall on the metal reinforcement. Most often such situations occur when the concrete is drilled to a great depth. In this case, the rebar is handled with a punch, and then you can continue to drill.

Another option for solving this problem, when, for example, the concrete floor is mottled with metal reinforcement, is to use a drill on metal, which can easily be supplemented by any impact drill.

Due to the fact that with the tool used at home it is impossible to drill longer than fifteen minutes, every quarter of an hour it is necessary to take a break of the same duration. During this break, both the concrete and the tool being used are cooled. One of the features of including the tool in the work on a concrete break after such a break is to treat the drill with water. For example, a screwdriver with a water-soaked drill is guaranteed to last longer, managing a huge number of other work tasks.

How to Use an Electric Screwdriver Properly?

Many craftsmen prefer to use an electric screwdriver instead of a screwdriver. It allows you to save time and get the job done quickly and efficiently. Let’s get acquainted with the principles of operation and the device of this tool, learn its areas of application and rules of operation, and give some useful tips.

Design and principle of operation

The electric screwdriver can be used in various fields of activity and for various activities, such as in the home, construction, assembly and disassembly of furniture, in various workshops and where many fasteners are used. They can drill, thread, screw and unscrew fasteners. Let’s get acquainted with the device and the principle of operation of such a mechanism.

All wrenches are divided into three types:

They are powered by a normal mains supply and are called mains screwdrivers;
operating on a charged battery and bearing the name rechargeable;
Both mains-powered and battery-powered. a combined version.

All wrenches are very similar, both internally and externally. They consist of elements such as:

housing;
chuck;
power button;
rotation switch;
speed regulator;
trigger lock button;
tightening torque regulator.

Some models additionally have a backlight, and some lack one or another element. For example, the mains models have a power cord, while the cordless models have a charge accumulator.

The body of the power tool consists of two parts and can be made of plastic or different metal alloys, but this is much rarer.

The principle of operation of all screwdrivers is similar to each other. the motor is driven in a rotary motion by the electricity consumed, which transmits force through the gear and shaft from the motor to the available nozzle installed in a chuck, and the nozzle has already performed the process of drilling, screwing or unscrewing fasteners. The mains-powered screwdrivers use a mains AC voltage of 200 V, whereas the cordless models use a DC voltage of 3.5 V to 36 V.

Changing the screwdriver bit is also quite simple and straightforward. an electric screwdriver can have a quick-action chuck or a wrench chuck.

Changing the nozzle with a quick-change chuck:

to begin with, you need to pick up a drill bit for the work you plan to do, or a bit, taking into account the size of the head, the type of slot;
The cartridge is unscrewed counterclockwise;
install the selected nozzle;
turn the sleeve of the chuck clockwise to clamp the bit.

Changing the screwdriver with a wrench chuck:

take the wrench and insert it into the special recess;
unscrew the chuck;
insert a new nozzle;
turn the wrench clockwise, securing the nozzle.

How to prepare for work?

The first thing you will need to do in order to get started is to remove the electric screwdriver from its case or suitcase and check it for visible damage, chips or cracks. If you notice that there is something wrong with the tool, you must not use it under any circumstances, because it can be unsafe. Always make sure the electric screwdriver battery is charged, or the electric screwdriver itself is plugged in. When these conditions are met, turn on the electric screwdriver to work at idle speed and check that the rotation of the nozzle and the threads on the fastener. If all the conditions are met, you can safely start working.

Don’t forget to choose and properly fix the nozzle or drill bit depending on where and how you are going to work. We mentioned above how to attach them when we talked about changing nozzles.

When using the appliance directly, there are also a number of simple rules and requirements to follow.

Pay close attention to the electric screwdriver itself. There is a scale on it, by turning it you can adjust the power of the tool. When turning the dial, set the mode you need based on what kind of work you are doing now.

Switching between these tool options is quite easy and straightforward. It is only necessary to hold the electric screwdriver by the handle located above the battery pack. The handle is most often covered with a material that is rubberized. That is why this machined handle is safe to use and ensures that the electric screwdriver will not fall out of your hand when you are working. The tool can be secured to the hand with a hand strap for added safety.

Usage options

The correct use of an electric screwdriver is its use according to the manual or specified documentation. According to these documents, the main area of use is directly the ability to screw and unscrew various fasteners, as well as for drilling various holes.

Depending on their capabilities, this or that model can be used in both domestic and professional settings. Household screwdrivers are cheaper and have less power, while professional models have more power, high performance and a wider range of functions for use.

But some users use an electric screwdriver, for example, for such unusual things as polishing a car, to stir mix or paint, to grind various surfaces, to twist wires, to bind fixtures and even to drill holes in ice.

Tips for drilling in concrete

Users often wonder how to drill concrete with an electric screwdriver and whether it is possible. Concrete is a rather rugged material, so you need to consider the diameter and depth of the hole. If a hole with a diameter of more than 10 mm is envisioned, it will be difficult to drill such a hole.

When drilling concrete, drill bits with a diameter of 3-5 mm are taken. Particular attention should be paid to the speed. If screwing in simple fasteners, 500 rpm is sufficient. But for drilling you already need 1300-1500 rpm.

Another criterion for working in concrete is torque. For such applications, an electric screwdriver with an output from 90 to 140 Nm is the right choice. It turns out that an electric screwdriver can drill a wall made of concrete. The tool with this point will also come in handy for drilling brick walls.

Some craftsmen use an electric screwdriver to drill a hole when fishing. You need a lot of torque. Some Makita models and Metabo tools cope with this.

With an electric screwdriver, you can easily drill through concrete up to 10 mm

What professionals advise?

Concrete structures are quite strong and difficult to drill with. In addition, quite often drill bits bump into the crushed rock that is part of the concrete mixture used to form the wall and ceiling panels.

Holes in concrete have to be made quite often, especially in the process:

finishing work;
furniture installation;
air conditioning hangers;
The screwdriver can easily drill up to 10 mm into the concrete;
plumbing installation.

You can solve the problem of holes in a concrete wall in two ways:

It is worth noting that ordinary drills to make a hole in a concrete wall will not work, so before you start, you need to buy drills with specially soldered plates of high-strength pobedite alloy, which perfectly cope with concrete and bricks. But it is not recommended for soft materials, as tungsten carbide drill bits will not cut them, but crush them.

Manufacturers of hand tools: the top 4 popular devices

DeWALT DCD985M2

Dielectric impact drill/driver in pistol form, with quick-action chuck, illumination and motor brake. Properties of the presented model:

Quiet 3-speed iron gearbox.
Battery. Li-Ion 18 V.
Torque of 80 Nm.
Blows per minute. 34000 beats.3 speed gearbox 3 speeds/min.
Weight. 2,4 kg.
Speed of rotation. 2000 rpm./min.
Maximal Ø of drilling for concrete. 16mm.

Design and characteristics

From the outside, the electric screwdriver looks very much like a drill, as in its mechanical action. Difference. low rotation speed/high torque. Besides, screwdrivers have fixed speed characteristics (in drills they are regulated without assistance of others). Speed control is necessary for safe and high-quality work of the tool. The chuck stops when the screwdriver is 100% tight. Even if the chuck stops, the motor is still running.

A certain speed/mode of operation is designed for every kind of work. There is a reverse function, screwing, unscrewing screws (also nuts, screws, screws, soft materials). Craftsmen use screwdrivers all the time. In some cases (working with drywall, assembling interior, creating a partition) the tool increases the speed and productivity of the work in a couple of times.

Construction diagram of a cordless electric screwdriver.

the screwdrivers are designed according to the same principle. The basis of construction:

pistol grip (for working with the driving hand);
small weight
A starter button that starts/controls the rotation
power source. mains or battery (note that the battery is more massive and expensive than the tool itself);
The capacity is limited by the total weight of the tool;
Continuous work time of about 3 hours;
a spare battery is available (depending on the model).

DeWALT DCD985M2

powerful percussion mechanism (drilling 13/60 mm holes in concrete, 16 mm in stone);
3-speed gearbox, the speed of which can be adjusted by the user;
for the torque mode you can select 1 desired combination of 22;
speed control unit integrated in the tool gives additional control over the process;
LED backlight;
A specially designed chuck to drill a variety of materials;
functionality (closely related to the technical characteristics);
compatibility with fasteners to drill metal/wood/stone/concrete.

How to choose a tool?

For more work, you need a peorator or drill, which has an impact function, and drills with pobeditovye tips. Impact drill combines rotational with reciprocating motion, which helps it perfectly copes with lightweight concrete, and the question of how to drill a concrete wall, which is a carrier, there is a simple answer. the best helper will be a peorator, whose main purpose is the piercing of concrete fences. There is another difference:

Metal drill bits should be used to drill through rebar caught in the body of a concrete wall.

Can an electric screwdriver drill through a concrete wall?

” Articles ” Can you drill concrete with an electric screwdriver

During many construction processes it is necessary to drill in concrete. A tool that can cope with such a task is an electric screwdriver.

Can you drill with an electric screwdriver?. EcommerceMarket.ru

Manufacturers offer a variety of tools. Almost everyone can pick up a tool to suit their financial capabilities and technical requirements. The electric screwdriver is more and more common in the home workshop. That’s why there are questions about what else you can do with it. Today we’re going to find out if you can drill with an electric screwdriver?

Specialists do not recommend working with concrete. Such hard material can even a drill with good technical characteristics can not take.

But if your model has a hammer function, you can try to drill through thin concrete, stone or bricks. As a rule, modern structures are erected from aerated concrete or sand-lime brick.

Such surfaces can be drilled with the most ordinary model, which does not contain a blow function. The main thing is to use the right drill bit.

What an electric screwdriver can do without problems? If you plan to work with wood, plaster, metal or plywood, then you can safely pull out the tool. It will not only help to screw in screws, but it is also useful for drilling.

In order to safely use the device for drilling, you should choose it correctly. What to pay attention to? If you want it always ready to work, then buy a mains or cordless device, but with a spare battery.

The speed affects the ability to drill in different materials. For example, for screwing, a value of 500 rpm is enough./min. For the drilling function, the speed should reach up to 1300 rpm. It’s also important to pay attention to the torque.

If it is small, then such an electric screwdriver is only suitable for drilling in wood.

To summarize, it is safe to say that you can drill with an electric screwdriver. Modern models can handle almost any surface. Even with thin concrete or brick. If you are just picking up a new model of the tool, then heed our advice.

Is it possible to drill in concrete with a drill bit??

Even with a concrete wall, many home craftsmen wonder how to hang a picture without drilling. This can be done in several ways. If the partition has a finish in the form of wallpaper, you can stick a sewing needle there, on which the picture is hinged.
In order for the work to go easily, and the master did not strain his hands, you should practice how to hold the drill. The tool is taken in one hand according to the principle of gripping a gun. The second hand is placed on the handle, if there is one. Fingers should be placed near the cartridge.

Attention! Quite often a drill is chosen when making holes in the concrete, but it is important to remember that this tool is not designed for such work. This is due to the fact that the bearings, gearbox and motor are under high load. In this regard, the equipment should be used with caution so that it does not fail under high loads.

Specialist Комментарии и мнения владельцев

Now you know how and with what to make a hole in the wall, but if you have no experience in such works. first of all ask somebody from your more experienced friends to teach you how to work with equipment, otherwise the wall and the tool can become much less functional than it was before the work began.

Remember also that though our grandfathers and great grandfathers were able to make repairs of any kind and complexity using only a hammer, we still live in peace time, when the lack of tools is not felt. Therefore, if you have decided to get a hole in the wall, but you have at hand only a low-powered drill without the punch function, it is not worth torturing the walls and the machine, and it is better to wait a little and ask your friends about the availability of the peorator. you will probably be lucky. Oh yes, if you live in an apartment building and you are familiar with such a nuisance as having neighbors, then be merciful to them and do not start your drill exercises with the first roosters. they will thank you.