How To Make Tracks On A Tiller

How to properly care for your caterpillars?

In order for the caterpillar to serve the tiller for a long time, it is important to provide the device with comprehensive care. In particular:

  • Observe the adjustment level and chain tension.
  • Externally, make sure that when driving out on a similar unit, the chain is complete.
  • All rubbing elements should be regularly treated with machine oil.

What are tiller tracks and their features?

How To Make Tracks On A Tiller

Tiller tracks are universal agricultural attachments for motoblock equipment (winter-summer). A modern track attachment is similar to a snowmobile. This device has a roller suspension instead of a skid suspension, so this agrustrament can be perfectly used in any weather and at any time of the year. It is demi-season. At the same time, the modernization did not affect the quality and technical characteristics of the track attachment on the tiller.

A modern attachment to a tiller on tracks allows year-round:

  • Cope with any water obstacles (the depth of the latter is limited only by the distance to the engine);
  • Move on any freak.

Different operating conditions are the key advantages of this professional equipment. That is why track attachments for tillers are indispensable in the work of foresters, fishermen, hunters.

This agro device does not require any modifications either from the attachment side or from the tiller side. The equipment is completely ready for use.

Tracked attachment to the tiller. features, how to do it yourself

Thanks to the active development of technology and the emergence of new innovative solutions, the life of farmers and agronomists has become much easier. The tracked attachment to the tiller is a real technical miracle and know-how highly appreciated by specialists in agriculture and agronomy.

In this review article, we will dwell in detail on what a track attachment to a tiller is, we will tell you how you can make homemade tracks for a tiller.

Options from which you can make

Often, masters, trying to assemble a homemade all-terrain vehicle, forget that it must be not only practical, but also necessarily light. It is important to pay attention to the thickness of the future device. it must be selected, starting from the power of the motoblock equipment. You can make homemade tracks on a tiller in several ways, for example:

  • With a conveyor belt and roller-sleeve chain. This method is very simple. This scheme does not imply the use of machines and special tools. To lengthen the operating time of the track on the tiller with your own hands, you can make a firmware from the edge with a fishing line in increments of one or two centimeters. The ring tape can be fixed with a hinge similar to a piano loop. Alternatively, the ends of the tape can be sewn (but this method is considered not very reliable);
  • With the help of old auto-protectors of a car or tractor. Tiller’s crow’s feet are very practical and easy to make. An important advantage of this method is that there is no need to additionally produce special cargo hooks. Tillers on tracks are done as follows. First, a track with a tread is cut out of the old tire, with the help of a well-sharpened knife, a saw with fine teeth and a jigsaw, its side surface is separated (it is advisable to do this carefully and efficiently). During cutting, it is necessary to periodically moisten the cloth with soapy water, this will maximize the prevention of friction of the jigsaw blade. After removing the side, excess layers are removed from the inside of such a “semi-finished product” (so the track will not be so solid). Such a homemade caterpillar will be ideal for agricultural machinery, because it will immediately have a closed outline. That is why it will be stronger. But you need to remember about the limited width. To avoid this, it will not be superfluous to use a triple or double protector;
  • With belts and chains. Do-it-yourself drawings of such a caterpillar tiller are very clear. In this case, it makes sense to take belts with a wedge-shaped profile, which must be connected by means of load carriers made of iron or steel massive plates (they must be drilled in advance), attached to the belts with rivets and screws. The safest way is to design the fixture using the same old chains that are not used on the farm and are lying around in the barn. You need to take two chains on one tape.

How to make caterpillars for a tiller with your own hands?

Many experts often ask themselves how to make caterpillars for a tiller with their own hands. In fact, making a caterpillar attachment to a tiller with your own hands from improvised devices is very simple. First you need to collect the necessary materials, in particular, to make caterpillars for the tiller with your own hands, you need:

  • Drill;
  • Screwdrivers;
  • Nuts;
  • Keys;
  • Chains;
  • Electric jigsaw;
  • Knives;
  • Pliers;
  • Bolts;
  • Sanding belts;
  • Welding machine;
  • Angle Grinder;
  • Wire.

Now you know all the detailed information about motoblock tracks. Using it, you can plan the purchase of this equipment or estimate your strength in advance in order to design such elements on your own according to the described algorithm.

We make homemade caterpillars for the tiller: photo. Details and diagrams.

  • How to make homemade tiller tracks
  • Homemade track for a motorized towing vehicle
  • The best homemade products from Tiller on tracks photos

Many people involved in the manufacture of homemade equipment also develop tracked ATVs and homemade tiller tracks. When putting this idea into practice, people use a variety of solutions. But the manufacture of tracks remains a big problem for fans of this type of transport. After all, if an all-terrain vehicle or a snowmobile is made by hand, then the caterpillars should also be homemade.

How to make homemade tiller tracks

Here we will consider several methods of making tracks with our own hands, with good performance.

The easiest version of homemade caterpillars

For light all-terrain vehicles and snowmobiles, the tracks can be made from a conveyor belt and a roller chain. To make such a caterpillar, it is not necessary to own a special tool, everything can be done “on the knee”.

To extend the service life of the tape, it is necessary to stitch it along the edges with a fishing line, observing a step of 1 centimeter, which will protect the tape from fraying. To connect the ribbon in a ring, you can sew the ribbon from the ends, or use a hinge.

Choosing the thickness of the tape should be based on the engine power. If you use engines from domestic motorcycles, it is enough to take a belt with a thickness of 8-10 mm, used on conveyors in agriculture.

Such a self-made snowmobile track has a good resource, and is easily repaired if necessary.

Homemade track for a motorized towing vehicle

It is very common among home-builders to make tracks using car tires. For this, tires are selected, which have a suitable tread pattern, from trucks.

To make such a caterpillar, you need to cut the beads from the tire and leave the treadmill. This is a rather laborious work that requires good patience, because the tool used is a sharpened boot knife.

To make the work easier, from time to time the knife blade can be moistened in a soapy solution to cut the rubber faster. One option is to use a homemade cutting device, or use a jigsaw with a fine-toothed file.

After cutting off the beads, if the track is too hard, you can remove the excess layers of rubber inside the resulting ring. If the tread pattern is not suitable for the conditions of use, then a new lug structure is cut.

The undoubted advantage of a home-made caterpillar from a tire over a caterpillar from a conveyor belt, in an initially closed circuit, and therefore reliability. The minus of this caterpillar is in the limited width of the workpiece, which can be corrected by using a double-width option.

Belt tracks

This option for making a caterpillar is attractive for its relative simplicity.

To do this, you need to connect the belts with V-shaped profiles into one piece with screws or rivets, using lugs attached to the belts.

To make holes for the drive sprocket in such a track, you need to make gaps between the belts.

You can find many ways to make caterpillars with your own hands. the main thing is to have patience, desire and perseverance. then everything will work out.

The easiest version of homemade caterpillars

For light all-terrain vehicles and snowmobiles, the tracks can be made from a conveyor belt and a roller chain. To make such a caterpillar, it is not necessary to own a special tool, everything can be done “on the knee”.

To extend the service life of the tape, it is necessary to stitch it along the edges with fishing line, observing a step of 1 centimeter, which will protect the tape from fraying. To connect the ribbon in a ring, you can sew the ribbon from the ends, or use a hinge.

Choosing the thickness of the tape should be based on the engine power. If you use engines from domestic motorcycles, it is enough to take a belt with a thickness of 8-10 mm, used on conveyors in agriculture.

Such a self-made snowmobile track has a good resource, and is easily repaired if necessary.

Homemade track for a motorized towing vehicle

It is very common among home-builders to make tracks using car tires. For this, tires are selected, which have a suitable tread pattern, from trucks.

READ  How To Make Tiller Attachments

To make such a caterpillar, you need to cut the beads from the tire and leave the treadmill. This is a rather laborious work that requires good patience, because the tool used is a sharpened boot knife.

To make the work easier, from time to time, the knife blade can be moistened in a soapy solution to cut the rubber faster. One option is to use a homemade cutting device, or use a jigsaw with a fine-toothed file.

After cutting off the beads, if the track is too hard, you can remove the excess layers of rubber inside the resulting ring. If the tread pattern is not suitable for the conditions of use, then a new lug structure is cut.

The undoubted advantage of a home-made caterpillar from a tire over a caterpillar from a conveyor belt, in an initially closed circuit, and therefore reliability. The minus of this caterpillar is in the limited width of the workpiece, which can be corrected by using a double-width option.

We make homemade caterpillars for the tiller: photo. Recommendations

Many people involved in the manufacture of homemade equipment also develop tracked ATVs and homemade tiller tracks. When putting this idea into practice, people use a variety of solutions. But the manufacture of tracks remains a big problem for fans of this type of transport.

After all, if an all-terrain vehicle or a snowmobile is made by hand, then the caterpillars should also be homemade.

How to make homemade tiller tracks

Here we will consider several methods of making tracks with our own hands, with good performance.

Belt tracks

This option for making a caterpillar is attractive for its relative simplicity.
To do this, you need to connect the belts with V-shaped profiles into one piece with screws or rivets, using lugs attached to the belts.

To make holes for the drive sprocket in such a track, you need to make gaps between the belts.
You can find many ways to make caterpillars with your own hands. the main thing is to have patience, desire and perseverance. then everything will work out.

How to make a tiller on tracks with your own hands?

When choosing a material for tracks, it is important to consider that it should not be excessively heavy. Since the tiller itself does not have a powerful engine, it simply will not cope with weighty material and, most likely, will break. The caterpillar mechanism, as a rule, is made of motorcycle tires, chains, pipes, belts, or a conveyor belt in combination with a sleeve-roller chain.

Most craftsmen create tracks from tires. these parts are easily converted to the desired design. It is necessary to choose tires for large trucks, taking into account the existing tread pattern and shape, because the correct pattern will improve grip. It is better if these are spare parts that previously belonged to tractors or other large-sized models.

A properly selected tread will be in good contact with wet ground, ice-covered and snow-covered surfaces. In addition to the materials for the tracks, a tiller with a gearbox, as well as a pair of additional wheels, will be required to construct a full-fledged device. If necessary, an additional cart is attached to the tiller and, if desired, even on skids, in order to transport goods in deep snow.

Features and device

Tracks for the tiller greatly simplify both the transportation of the load and the movement of the device itself. Due to the fact that the track mechanism covers a fairly large surface, the tiller moves much more evenly, exerts less pressure on the surface and does not get stuck on difficult soils. the tiller on tracks is able to work even in bad weather, and in good weather it becomes even more maneuverable.

The maintenance and use of the tracked module does not cause any particular difficulties for the owners, and it is not difficult to do it yourself. It should be borne in mind that when the tiller is equipped with a tracked module, its speed decreases. However, the device’s ability to navigate difficult terrain, transport goods and even clear snow from the area increases.

Tillers with tracked modules are otherwise identical to conventional tillers. The engine must be four-stroke with the ability to lock the axles so that the device can turn without making a whole circle. There is also a requirement for water cooling to cope with high loads that cause the motor to overheat. This type is more effective than air. The clutch system, gearbox and gearbox for tracked mechanisms are presented in the traditional version. The tiller on tracks is controlled by a handle.

When creating tracks on your own, it is important to understand that if you design them too high, the tiller‘s center of gravity will change, and he will begin to experience difficulties turning, and even tilt to one side or another. To prevent this situation, the second driven axle will have to be made a couple of centimeters longer. Also, with the help of a bushing, it will be possible to expand the wheelbase already existing at the tiller.

Step-by-step manufacturing instructions

To make a caterpillar mechanism for a tiller with your own hands, in addition to the materials used, you will need certain tools: an angle grinder, and sometimes a drill, a boot knife and a set of screwdrivers, bolts, nuts and wrenches, a welding machine, wire, chains and a sanding belt. Of course, drawings will also be necessary, which are easy to find on the Internet in the public domain.

If homemade tracks are made from car tires, then the first thing the tires are freed from the sides to the state of a running belt. tracks for tracks. This is easier to do with a well-sharpened knife, for example, designed for working with boots. The adjustment process is lengthy, but it can be accelerated by periodically smearing the blade with soapy substance.

It is more convenient to cut the sides of the tires with an electric jigsaw, which has small teeth. At the next stage, the wrong side of the tire is also corrected: excess layers are removed from it. This should be done when the tape is too dense inside. Such a track attachment made of car parts turns out to be quite durable, since the tire is initially closed, which means that it will be more difficult to damage the tracks during operation. Unfortunately, the available tire width will not allow the user to use a large surface. However, some craftsmen solve this problem by using multiple tires.

The simplest track module can be made from a conveyor belt and sleeve-roller chains. First, depending on how powerful the engine is, the required thickness of the belt used is selected. This is followed by the processing of the edges, which can begin to shaggy and because of this fail earlier. For this, a fishing line is used with a pitch of ten millimeters. The finished edges are then sewn into a ring, with a special hinge, or simply along the end parts.

Despite some primitiveness of the mechanism, it will serve for a very long time. It is important to add that the thickness of the tape must exceed seven millimeters, otherwise the device will not be able to withstand the required loads. The optimal interval is considered to be from eight to ten millimeters.

The track module can be made from belts if they have a wedge-shaped profile. It is best to connect the parts with a grouser, which is fixed on the straps with screws or rivets. Another common solution is to construct tracks from chains of equal size. Such a versatile part, as a rule, is abundant in any home workshop, so this method is also economical. To make tracks, you have to take a couple of equal chains and unclench their extreme links.

Now two chains can be connected into one circuit, the links can be clamped back and for reliability, everything can be welded. For greater strength, the chains can be fastened again with lugs, which, by the way, are also simply made from scrap materials. metal sheets of the required thickness. In general, this part can be not only steel, but wooden and even plastic. In the latter case, wood bars or plastic tubes are used as it. Which material will be most suitable can be determined depending on the purpose of using the tiller.

In the case when the cargo expected for transportation does not differ in large weight, the lugs should be made plastic. The same applies to moving devices equipped with weak motors. When the tiller is planned to be used as a tractor, and it has a rather powerful engine, steel parts should be preferred.

Sometimes homemade caterpillars are reinforced with pipes, which are welded together. Parts in this case are made of metal and have a rectangular section. In this case, it is recommended to remove the drive shafts from the “Oka”, and take the spline part from the “Buran”. The equipment must be equipped with brakes that are mounted on the front shafts. This addition allows you to get a device with maximum capabilities.

It is worth mentioning that in order to convert a conventional tiller into a tracked one on the go, you first have to put two additional wheels on it, one on each side. The result should be a four-wheeled structure, on which the tracks are already put on. Some craftsmen prefer to make these additional wheels removable rather than weld on new mountings. This can be accomplished by attaching the wheels to the axle using a flexible or rigid transmission. It is impossible not to mention that it is not necessary to make the tracks yourself. no less economical solution would be to use parts from old equipment, for example, “Buran”.

READ  How To Make A Cultivator For A Tiller

Recommendations for use

When using tiller tracks, it is necessary to constantly check how well the chain is tensioned, and also regularly oil the parts whose friction occurs during movement. In addition, it is recommended to check each time before use for any damage or breaks on the chain. After the trip, a scheduled inspection should also be carried out in order to detect any damage or broken hooks in time. When using the tiller, you should avoid driving over roots and stone massifs, as well as hemp, otherwise the track module will be torn very quickly.

For an overview of the tiller-all-terrain vehicle on tracks, see the following.

Additional Tips

Before making a caterpillar drive for a tiller, it is necessary to make drawings, determine dimensions. This is done so that in the case of a very high self-made caterpillar for the tiller, it will be necessary to change the center of gravity of the walk-behind tractor. This will inevitably provoke problems when turning, as the technique will fall to the side. To avoid this, the second driven axle must be made longer.

In addition to the rules regarding the power of the engine, they also look at the cooling system:

  • Air cooling is ineffective at significant overloads, which will damage the engine.
  • Properly use water cooling that has proven to be stable.

Attached attachments to the tiller can significantly improve the vehicle’s patency data. Therefore, it is possible to diversify the range of operations carried out that a home-made apparatus can handle. To put it another way, the created base in some situations outperforms standard wheels. However, the alteration of motoblock equipment may not suit the owners of these technical devices. It talks about special requirements for the engine.

The motor fits with good traction. Homemade production is suitable for execution in a garage. That is why the unit created in the garage is an excellent replacement for tracked monoblock units on the market.

Phased technology

Several reliable DIY technologies have been developed for creating a tracked structure. They have shown themselves to be more reliable, so they are often used. Which one to choose depends on the skills and materials that you may need. You can make caterpillars for a tiller with your own hands, following the recommendations of the masters.

Two more methods

Tracked motoblock machines are often created using wedge-shaped belts. Fasten them to the lugs. The belts are fastened with rivets. A popular method is to use uniformly sized chains. They can be found in the garage and are often left over from other vehicles. Step-by-step work:

  • Take 2 equal chains.
  • Break the extreme links, unite the chains into a single ring.
  • Brew.
  • Hooks fasten the chains together and create strong fasteners. They can be made from steel plates of the required thickness. They are bolted together.

A crawler track for a tiller requires skills in working with equipment, with a welding machine.

Structural differences

Tracks for Tiller Neva significantly simplify the transportation of cargo, the movement of the equipment itself. The tracked module covers a significant surface, the walk-behind tractor drives more evenly, provides the least pressure on the road and does not slip on difficult ground. The device on tracks can function even in bad weather, and in sunny weather it has excellent maneuverability.

It is easy to look after and use the module on tracks, but you can build it yourself. The main thing is to understand that when the motoblock device has caterpillars in the kit, its speed mode will be less, but insignificantly.

crawler tillers in the other are absolutely no different from standard motoblock vehicles:

  • The engine is suitable for 4-stroke with the possibility of auto-locking the axis so that the technical device can turn around without turning around in a circle.
  • There is also a requirement for a mandatory arrangement of water cooling to cope with overloads, due to which the engine heats up excessively.
  • A tracked module of this type is more efficient than an air-cooled one.
  • Coupling system, gearbox and gearbox in the standard model design. You need to control when using the handle.

A tiller mower will help you quickly and efficiently remove not only grass, but also weeds and even small ones from the site.

When making caterpillars to the tiller with your own hands, you need to know that if you design them very high, then the center of gravity of the walk-behind tractor will change, and it will have problems when turning, and even bending to the side. It is necessary to make the second driven axle 2 cm longer.Also, by using a bushing, it will turn out to expand the wheel base already available in the motoblock structure.

Car wheel

Tracked attachments to the tiller made of car tires are a popular solution. Craftsmen say the design will be more reliable with auto-tire tracks. To make the device practical, it is necessary to take care of the quality of the tires. Tractor tires are what you need. The tread pattern plays a role, since it is a lug. The process is phased:

  • When the tires are prepared, they cut the track.
  • This is a difficult job that requires attention. A well-sharpened knife is used for cutting. It is correct to take the one used by shoemakers. It must be moistened periodically in a soap solution. This makes the rubber surface easier to cut.
  • Both sidewalls are cut off from the tires. To make the process easier, take a jigsaw with not large teeth. Cut off excess parts inside the tire if required. If the track turned out to be hard inside, it is allowed to cut it again.

The operation of gardening equipment begins with its launch. tiller is a structure in which.

The advantage of this technique is that no ring connection is required. The tire is already round. Therefore, it turns out to improve the strength indicators of the module, which is important in conditions of serious overloads. And yet, such designs are quite compact. The length will be the size of the tire used.

Conveyor belt

The technique is the easiest. In addition to the conveyor belt, you need to take a bushing roller chain. The ease lies in the fact that it does not require a lot of additional materials and tools to create. To increase the period of using the machine tape in the module, it is necessary to circle it along the edge part with a fishing line. Be sure to provide a step of 1 cm.

Particular attention is paid to the height of the material. It completely depends on how long the device will withstand. It is optimal to take a tape with a height of 0.7 cm at least. There is one more wheel to be taken care of on both sides. Suitable from an old car, but at the same time it matters that the size is the same as that of a wheel on a walk-behind tractor.

Using the base from Buran

How to make homemade caterpillars for a tiller with your own hands

Owners of motor-block equipment often go to home-made manufacturing of components for a powerful unit. The tracked tiller is distinguished by its maneuverability, it is convenient when working in the garden and in other works. And the tracks themselves, if you have material, experience, you can make yourself. You only need to follow a certain technique and sequence.

What materials are required

Converting the wheel modules into tracks requires a powerful engine. It must have an axis block. Power is important, as the vehicle will be driven by the vehicle on difficult roads. Without improvement, getting good maneuverability is unrealistic. Basic building materials that are required:

  • Motoblock machine with gearbox, 4-stroke motor, axle unit option.
  • Several extra wheels to put on a caterpillar.
  • The track attachments themselves.

Depending on the building material used, two good diameter tires and a conveyor belt may come in handy. If you include a platform here, you get a compact tractor.

When choosing a building material to make tracks on a tiller with your own hands, it is important to take into account that it should not be heavy. The motoblock machine is not equipped with a powerful engine, it simply cannot cope with a heavy load and will break. Tracked modules are made from:

  • Motorcycle tires.
  • Chains.
  • Tubes.
  • Belts.
  • Conveyor belt in symbiosis with a bushing roller chain.

Tiller attachments are usually made from car tires. these elements can be converted without problems. It is correct to take the tires of large trucks, given the existing tread pattern, shape, because the pattern will improve grip. Tractor tires or elements from other large machines are perfect.

The tread pattern can provide full contact with both wet ground and icy road, with a snowy track. In addition to materials for the tracked module, to create a full-fledged device, a tiller with a gearbox is required, as well as several car wheels. If necessary, fix the trolley and, if you want, even on runners to carry significant weights through the snowdrifts.

Step-by-step instruction

Many people wonder. how to make caterpillars for a tiller with your own hands? To answer this question, consider several effective methods of self-manufacturing caterpillars, tested in practice.

READ  How to Make an Angle Grinder On a Battery

How to make a homemade track from belts and chains

All-terrain vehicles on tiller tracks can be made using the most common belts with a wedge-shaped profile. The belts are connected to each other by means of a grouser, attached to the belts with rivets or screws.

Another method is to make the tracks from chains of the same size. Many summer residents have such material in bulk in the garage, which simplifies the search issue. The whole manufacturing process boils down to the following points:

  • Take two chains of the same size.
  • The last links of these chains must be unclenched, and then connected into a closed ring.
  • Next, we clamp the links and weld them.

The chains are fastened to each other using grousers, which can be made from ordinary steel plates of the required thickness. They are connected to the chain with bolts.

tiller on tracks Buran

If you have no desire to make your own caterpillars, then you can borrow it from old technology. For example, a tiller on tracks from Buran shows pretty good work.

It is advisable to use just the old part, because the new Buranovskaya caterpillar will be quite expensive, and the purpose of such alterations is the maximum cost savings.

Self-made tracks with your own hands. how to make a caterpillar drive and drive for a motorized towing vehicle, a snowmobile from Tiller Neva

Owners of tillers more and more often go to all kinds of homemade manufacturing of various components for this unit.

As a result, we get do-it-yourself attachments, transforming the tiller into a more powerful one, by installing a new engine, as well as many all kinds of alterations and additions.

Of course, this is not all about a good life, because most of the owners of a tiller are striving not only to save money on buying it, but also to reduce the cost of its further operation.

In particular, many people want to make homemade tracks for the tiller, thereby wishing to increase the cross-country characteristics of their units.

The resulting tiller on caterpillars will perform a slightly different role in the personal economy of a person, because it is already becoming a full-fledged vehicle, somewhat reminiscent of a tracked tractor.

Accordingly, a much wider scope of work opens up before him, which largely justifies such independent alterations.

From the transport belt to increase the cross-country ability of the all-terrain vehicle

One of the simplest methods is to make a caterpillar from a conveyor belt using a sleeve-roller chain. The ease lies in the fact that for their manufacture it is not necessary to use a large number of tools and aids.

To extend the service life of our conveyor belt in the track tiller device, you can sew it along the edges of the line with a line, observing a pitch of 10 mm. To connect the tape into the ring we need, you can sew it along the ends, or use the hinge.

Particular attention should be paid to the thickness of the conveyor belt, because it directly depends on the degree of load on the unit. The optimal choice will be a tape with a thickness of at least 7 mm. In addition, we need to take care of an additional wheel on each side.

You can take it from an old car, but remember that the diameter must be identical to the wheel on the tire.

Track module from a tire

Caterpillars from car tires for a tiller are also a fairly common homemade product, featuring a high reliability of the design. However, in order for the resulting tracked tiller to be practical, you need to take care of finding the right car tires.

On the domestic market of agricultural machinery, there are various options for cultivators, not only Russian, but also foreign production. The Mantis cultivator is a reliable and practical technique for decades.

Recently, small-sized agricultural machinery has been very popular, allowing you to carry out the same work as their “older brothers”, but at the same time they cost an order of magnitude less. Here is everything about the various types and characteristics of mini combine harvesters.

In particular, they must have the necessary tread pattern, preferably from tractors or large machines. The tread pattern is very important because it acts as a lug and also increases the grip of the track.

Let’s divide the manufacturing process into several steps:

  • Having found suitable tires, we need to cut out a track for tracks from them. This is a rather laborious work, which will take a lot of time.
  • For cutting, you can use a well-sharpened boot knife, which from time to time needs to be moistened in soapy water. this will help to cut the rubber better.
  • You also need to cut both sidewalls off the tires. To simplify the process, the sidewall can be cut with a fine-toothed electric jigsaw.
  • If necessary, remove excess parts from the inside of the tire. This manipulation must be performed if the track is too hard from the inside.

The advantage of this method is the absence of the need to connect it into a ring, since K. The tire already has a closed structure. This increases the reliability of such tracks, which is quite important in conditions of heavy loads.

However, such tracks are of a rather limited length. exactly along the length of the car tire.

Snowmobile attachments on Tiller Neva

So, the tracks on the Tiller Neva, is a full-fledged snowmobile attachment. Separately, you can purchase seats for drivers, thanks to which the Tiller Neva becomes similar to a tracked mini tractor, albeit with lower performance.

  • Developed speed (with the Neva tiller). about 18 km / h;
  • The total weight of the console is 37 kg;
  • Length. 100 cm;
  • Width. 60 cm;
  • Height. 34 cm;
  • Number of passengers. one driver and one passenger.

For more information about the tracked drive for the Tiller Neva, see:

In addition, there is an attachment for a tiller on tracks on sale, designed to be attached to the Agat and Salute models. In this design, there is no possibility of attaching a driver’s seat, which somewhat limits the capabilities of this device.

Their distinctive feature is the ability to control them not only with two hands, following the tiller, but also sitting in a folding type sleigh, which, however, must be purchased separately.

If we consider that the average (plus), we can say that the independent production of tracks is a fairly optimal way out for those who do not have the opportunity to spend extra money on purchasing.

Additional tips and warnings for making a goose yourself

Before you start making a homemade caterpillar, you need to clearly understand its required parameters. The fact is that in the case of manufacturing a very high track, the center of gravity of the tiller itself will be changed, which will inevitably lead to certain problems when cornering, i.e. The unit will roll onto its side.

In addition to the requirements for engine power, it is worth paying attention to its cooling system. The fact is that air cooling does not cope very well at high loads, which leads to significant overheating of the motor.

Thus, it is better to give preference to a water-cooled engine, which show more stable performance in operation.

Necessary materials

As mentioned earlier, to turn the wheel trailers Sadko, Don, Huter, Profi, Plowman, Champion, Carver, Husqvarna into a tracked one, you will need a fairly powerful engine with axial blocking.

Power is important because such a tiller will be used on a rather difficult surface, the passability on which requires additional technical data.

Summarizing a little, we can highlight the main materials that we need:

  • The presence of the tiller itself with a gearbox with a powerful 4-stroke engine with axle locking.
  • A pair of extra wheels so that you can pull the track on them.
  • The homemade caterpillar itself, made from handy tools.
  • Depending on what material will be used in the manufacture, we may need two large car tires, or a transport tape.

At the same time, you can make a full-fledged mini-tractor on tracks if you add an additional cargo platform, or use it as an all-terrain vehicle in the snow by adding a platform on skids. In general, full scope for imagination.