How To Properly Tuck The Line Into The Trimmer

25th July 2020

Trimming the line into the trimmer
The line feed system from the trimmer is manual, semi-automatic and automatic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30).

Spare coil storage space

It is very simple to install such a fishing line into the reel. According to the internal scheme inside the reel. We insert the center of the line with a metal mount in the upper part of the reel, and draw the ends of the line along the grooves and bring it out.

Material you can see

A little advice. Try not to let the line come into contact with hard objects when cutting. With this contact, the line will be cut. And since in this trimmer the line is not fed automatically, then every time you have to stop work, remove the reel and release the line again.

Thick line

It is stored at the top of the trimmer body.

How do I fit the line into the trimmer? Operating tips

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that this technique can be used in those places where an ordinary lawn mower will simply not be able to reach due to its massiveness. It is necessary to understand in more detail what trimmers are, and how to choose the best option for a particular summer cottage.

Types of trimmer line

As a rule, line separation is based on different sample diameters, which can vary from 1.2 to 4 mm. The most commonly used material is a material with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

how to properly tuck the line into the trimmer

There is one main rule here: the more power the apparatus has, the thicker the line should be.

This element can also differ in the type of its section. So, it can be round (suitable for cutting plain grass) or square (for mowing soft green cover), sharp edges (tall grass), or be equipped with notches ideal for thin grass in diameter.

Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.

Next, you should take a closer look at the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

What is a trimmer?

This equipment is based on the following elements:

A motor whose main function is to rotate the cutting head at the end of the rod;
The head itself, consisting of a coil, on which either a fishing line or a knife can be wound;
Knives or fishing line rotating at high speed, which are the main cutting part of the device, how to load the fishing line into the trimmer will go a little further.

An electric device is inferior in its power to a gasoline one, so it is ideal for working on a standard plot of land that is adjacent to a house with source of electrical energy. The main positive aspects of such equipment are the absence of noise during operation, light weight, ease of use and, of course, environmental friendliness.

As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. There is no need to use electricity here, which has a positive effect on the functionality of such an apparatus. The cutting attachments can be changed, working with weeds of a wide variety of types.

One of the most common attachments is the fishing line, so you should dwell on this element in more detail.

Briefly about the line

Taking into account the models of the tool, the thickness of the line is 1.2-4 mm. There are such configurations:

Round. The most durable;
Curly. For soft grass;
Twisted or serrated. For thin grass;
Professional, not suitable for all instrument models.

When changing the cutting thread, you need to choose the one that suits your trimmer type. Preference should be given to specialized. Before tucking the line into the trimmer spool, it is better to soak it in water for half an hour. Then it will become more elastic and stronger.

How to tuck the line into the trimmer so that working with it does not get tired

Many summer residents use a trimmer. A scythe with an electric or gasoline engine to combat weeds. It is convenient when working in hard-to-reach places for a lawn mower: near fences, flower beds, houses, in a garden on narrow aisles, and can cut small branches. The main element of this miracle technique is an ordinary fishing line wound on a reel. The device is simple, but the cutting part wears out quickly and requires replacement. And the question of how to fill the line in the trimmer worries many owners of summer cottages.

How to quickly remove the coil from the tool

Before the thread is wound on a bobbin, it must be removed. Over, the methods of removal depend on the characteristics of the instrument. On trimmers with a motor near the ground, the reel has two side buttons, when pressed, part of the body is separated along with a device for winding the thread.

On tools with a bent rod, the lamb on the device is moved counterclockwise; having disconnected it, remove both the bobbin and the spring inside it. On trimmers with a straight bar, fix it with a screwdriver, rotate it clockwise and remove it. Then the device is disassembled either by means of latches, or by moving its parts in different directions. The spring is removed from the coil.

How do I fit the line into the trimmer?

In order for the area near the house to always look well-groomed and neat, it must be cut regularly. Fortunately, modern technology allows you to solve this problem without excessive physical effort. Electric trimmers are so easy to operate and maintain that even a teenager can use them to mow. The main thing is to figure out in advance how to fill the line with the trimmer.

How do I load the line into the trimmer?

So, our task is to properly load the line into the trimmer. Let’s take a closer look at where to start its implementation and what pitfalls can await us in the process.

Step 1. Choosing the line

Step 2. Remove the coil from the trimmer

To perform this operation, the trimmer must be disconnected from the mains and turned over with the working head up. The further course of action depends on the trimmer model and the design of the coil itself:

For small trimmers with a lower engine location, press on the keys located on the sides of the coil and remove its upper part from the head;
On trimmers with a curved bar, we clamp the coil body with one hand, while turning counterclockwise the lamb located on the body;
For trimmers with a straight bar and a gearbox, insert a screwdriver into the hole located under the coil, and then turn the coil body counterclockwise.

Step 3. Disassemble the coil

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mown area, since there may be a spring inside the coil, which will be quite difficult to find in tall grass. After disassembling, we will have three parts on our hands: the body (top cover), the protective casing and the coil itself.

Step 4. Measure the required amount of fishing line

Newbie mowers are usually interested in how many meters of line to wind on the trimmer reel? There are two ways to solve this issue:

Unwind a skein of line on a flat, dry place and separate half from it.
Measure 3-4 meters of line from the skein.

In any case, after the end of winding, the turns of the line should be on the body of the reel, without sliding off it. You don’t need to try to wind as much as possible, as the line will unwind poorly and break more often.

Step 5. Winding the line onto the reel

How to attach the line to the trimmer depends on the coil design. Consider the option when the reel body has one outlet for the line. In this case, the end of the line is clamped in the crevice of the coil, and then we wind the line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After the end of winding on the reel, you must put on a protective cover and bring the end of the line into it.

If the reel is designed to work with two tails, then the line must be folded in half and laid in the groove in the center of the reel. Further winding will be carried out along one or two slots, depending on the coil design. The direction of winding must also be opposite to the direction of rotation of the coil. At the end of the ponytail, the line will also need to be led out into the holes on the top of the reel.

How do I fit the line into the trimmer?

How do I load the line into the trimmer?

So, our task is to properly load the line into the trimmer. Let’s take a closer look at where to start its implementation and what pitfalls can await us in the process.

Step 1. Choosing the line

Step 2. Remove the coil from the trimmer

For small trimmers with a lower engine location, press on the keys located on the sides of the coil and remove its upper part from the head;
On trimmers with a curved bar, we clamp the coil body with one hand, while turning counterclockwise the lamb located on the body;
For trimmers with a straight bar and a gearbox, insert a screwdriver into the hole located under the coil, and then turn the coil body counterclockwise.

Step 3. Disassemble the coil

Step 4. Measure the required amount of fishing line

Newbie mowers are usually interested in how many meters of line to wind on the trimmer reel? There are two ways to solve this issue:

Unwind a skein of line on a flat, dry place and separate half from it.
Measure 3-4 meters of line from the skein.

Step 5. Winding the line onto the reel

How to attach the line to the trimmer depends on the coil design. Consider the option when the reel body has one outlet for the line. In this case, the end of the line is clamped in the crevice of the coil, and then we wind the line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After the end of winding on the reel, you must put on a protective cover and bring the end of the line into it.

Trimmer head with two antennae

Double flute head

After removing the spool from the reel body, we determine the number of strands for winding the line (1 or 2). There is no fundamental difference between bobbins with one and two grooves, but if carelessly threading into the twin groove, there will be operational problems. Due to the likelihood of interlacing adjacent lines of the tool, a situation may arise when, after wear of the working antennae, it is impossible to remove new ones.

Regardless of the number of streams, a fishing line with a length of 1.5 to 3 meters is taken for refueling. Winding must be done in the opposite direction to the rotation of the head, since winding in the direction of travel will lead to the fact that the line will not be removed from the reel. After the fishing line is tucked into the trimmer coil, thread the free ends (15-30 cm) into special holes. Next, we assemble the head in the reverse order of disassembly and check the operability. Do not worry if the ends of the two antennae are very different in size, because when you start the trimmer, the knife installed on the protection will cut off the excess.

Preparing to wind the line

Before the winding process, it is necessary to remove the spool with line from the body. Depending on the manufacturer, power and type (electric or gasoline), there are three design types of trimmers:

Compact electric trimmers.

Straight bar trimmer

This model provides the ability to install a knife. Removing the coil in such models is done by means of two keys recessed into the coil body. To mount the trimmer knife, it is necessary to align the hole of the reel and the rod, and then insert the device in the form of a steel pin (screwdriver, iron bar). After fixing the coil, the body can be easily twisted clockwise by hand.

Single-barbed trimmer spool

Single-barb lawn mowers reel

Many owners and experts note the ease of use and ease of refueling the bobbin with one mustache. Depending on the manufacturer, the length of the threaded line can vary from 2 to 5 meters. The end of the line is inserted into the head into a special technological groove or hole, and the winding is done in the direction opposite to the working rotation of the bobbin. Most reels have arrow marks on the outside of the body that indicate the direction of travel of the trimmer reel.

After winding, you need to leave a free end of 15-30 cm to enhance the centrifugal force, which is decisive when removing the trimmer line in automatic and semi-automatic spools. We pass the left end through the working hole of the coil and assemble the head.

How to properly tuck the line into the trimmer

You don’t have to work on site for hours on end to mow and tidy up your lawn. With any amount of work, such a device as a trimmer can quickly cope with it. This type of technique can cut grass of any length and density, it all depends on the model chosen. In order for the unit to fully work and perform its main function, you need to refuel the line, otherwise the trimmer will not be able to complete the task.

Line selection

First of all, you will need to choose the correct line. You shouldn’t do it “at random”, as it all depends on the unit model. Pay attention to indicators such as the diameter of the thread, as well as its cross section. You can find information about the diameter in the instructions for the trimmer. The second indicator (section) depends on what kind of work you are going to perform. If this is a soft young grass, a round one is suitable, if it is hard. Choose a square or 5-sided section.

How to properly fill the line in the trimmer: instructions

If you set the line incorrectly, the unit may break down and you will have to fork out to repair it. Therefore, before proceeding with the procedure, be sure to read the detailed step-by-step instructions. It’s easy to learn how to do this, and in a few minutes you can go mowing the grass.

How to tuck the line into the trimmer:

First, you need to remove the nozzle that is located on the gearbox. This is easy to do: the connection is the hole located on the side of the bottom washer and the recess. You can find notches on the axis. Be sure to insert a screwdriver to prevent the shaft from turning. When removing the nozzle, you need to twist to the right, not to the left. Disassemble the coil. Sink the clips located on it into the body, then gently squeeze the edges.
How to handle the line automatically? You need to handle it as carefully as possible, otherwise the spring will fly out of it (the same applies to the fishing line with a semi-automatic mode). Hold the parts with your fingers and take your time.
Spool with a through hole on the body. You need to pull the line through both holes (outer and inner). Then turn the button and release the thread.
If the reel functions only with 1 cutting element, the procedure is quite simple and quick. You will find a small hole in the inside of the spool that will keep the thread in place. You need to insert the end of the thread into the hole, then start winding. This should be done in the opposite direction in tone to the movement of the coil. Take a closer look. Perhaps your reel model has an arrow, it indicates the direction in which you need to wind.
The end of the thread is fixed with a groove located in the inner part of the bobbin. Leave a long piece of line outside.
If your model does not have a groove, hold the end of the thread with your hand, then place the top of the spool and thread the end of the thread through the hole.
Put the spool in the trimmer and get to work!

Sources: