How to put a disc on a lawn mower

How to install a small hard drive in your computer 2?

Speaking of connecting a hard drive, one cannot but mention the problem that users sometimes encounter when there is a need to install a hard drive or SSD 2.5 ″ in a computer in the case of which there are mounts only for standard 3.5 ″ drives. For this case, there are also special adapters in which you can fix such a hard and insert it into a regular place for disks of a larger diameter.

How to install and connect a second hard drive to a laptop?

Is it really possible to connect a second hard drive to the laptop? Yes, today you can increase the amount of space not only on a stationary PC, but also in a laptop. And for this it is not at all necessary to replace the standard hard drive, which is already in the laptop. And therefore, you do not have to face all the attendant problems, such as transferring files and reinstalling Windows and all programs on a new hard drive.

The second hard drive into a 2.5-inch laptop is connected using a special adapter, which is installed instead of a notebook DVD drive. Agree, now almost no one uses this device. And if you need to view discs, you can always use an external USB.

This is how this adapter looks like, invented (or copied?) By the Chinese:

So, we insert the hard drive into the adapter. You may also have to screw the fastener yourself to the back of the adapter, for which it will be screwed to the laptop case.

Next, we look for a fastening screw on the laptop case somewhere in the center from the side of the DVD drive. You may also need to remove the cover to do this. Unscrew it and take out the drive.

And in its place we insert the adapter and fix it in the same way with the same screw. After that, a new hard disk will appear in the “Computer” menu, which, after formatting, can be fully used.

How to connect a hard drive to a Windows computer?

With a desktop computer, things are much easier than with a laptop, so let’s start with that. So, you already know how to choose a hard drive, what characteristics to rely on when buying, so let’s leave this topic outside the scope of today’s article.

  • First of all, even before buying, you had to figure out which free connectors for connecting drives are available on your motherboard. the old IDE or one of the SATA varieties.
  • And second. what free power connectors are available on the Power Supply.

Modern hard drives, motherboards and power supplies work with SATA connectors. However, if they are all already occupied on the power supply, then take care of purchasing a Molex-SATA adapter to connect your second drive to a Molex-type power supply.

If you want to use the second old hard drive connected to a motherboard of the type “IDE”, and the latter is new and does not have such an input, then we buy an adapter from IDE to SATA.

Another option to connect a hard drive to a computer that does not have a corresponding connector for it is to use a special IDE-SATA PCI controller. Its plus is that with it you can both connect an old IDE drive to a new board, and a new SATA drive to an old motherboard. It looks like an expansion card that plugs into the PCI slot on the motherboard and adds support for working with IDE devices. Let me remind you that you can connect two disks or drives at once to a standard cable.

Let’s say you have already figured out all your nuances, purchased a second hard drive and, if necessary, adapters, and now you need to install it in the case and connect it to the motherboard and power supply. First, we fix the hard drive in a special basket in the case, or insert it along the rails and fix it with special fasteners or ordinary screws. depending on the design of the computer case.

After that, we connect the “small” SATA to the corresponding connectors on the back of the disk and on the motherboard, and into a larger SATA socket (for power supply) we insert either an adapter connected to the cable from the power supply, or directly the power supply cable with a SATA plug. We do this carefully so as not to break the socket on the hard drive, since there is no limiter on the bottom and you can easily break off a piece of the board with the contacts of this connector.

In the screenshot below, the green arrows represent the wide SATA ones that connect the second hard drive to the PSU, and the red arrows represent the narrow ones that go to the motherboard.

Yes, do not forget that all connections must be made with the power supply disconnected from the outlet, or with the power switch turned off, if there is one on it. As you can see. nothing complicated.

How to Connect a Second SATA Hard Drive to a Computer or Laptop and What to Do If Windows DOESN’T SEE THEM?

Well, the time has come when I no longer have enough space on the hard disk of my laptop on the Windows operating system. Due to the large amount of footage for video courses, lessons, graphics and everything else, even an external 2 terabyte drive does not save. And in this regard, I decided to share with you some ideas and instructions on how to install two hard drives on a computer or laptop and connect them to the SATA connector so that both are visible in Windows 10 or 7.

  • How to connect a hard drive to a Windows computer?
  • How to install and connect a second hard drive to a laptop?
  • How to install a small hard drive in your computer 2?
  • What to do if Windows does not see the second hard drive and it does not start with the computer?

What to do if Windows does not see the second hard drive and it does not start with the computer?

Another common problem that can be encountered when installing an additional hard drive in a computer is when Windows does not see the second hard drive. Why does it not start with the system?

First of all, if you are using an adapter, then it may be the case. Use a known good adapter.

If you have not used it or your adapter is working, then the whole point is more likely in the BIOS settings. precisely, the operating mode of the hard disk controller of the computer is incorrectly set, due to which it does not boot in the Windows system.

  • We reboot the PC or laptop and when the first inscriptions appear on the screen, we hold down the key to go to the BIOS (Del, F10 or whatever, depending on your model)
  • We go into the BIOS and look for the “SATA Controller” item (or SATA ATA / IDE / Raid Config, Mass Storage Controll or something else like that to set the HDD operation mode).
  • If you connected a drive with a SATA cable to the motherboard and at the same time the modern operating system Windows 10, 7 or 8 is installed on the computer, then the AHCI, IDE, Native or Enchansed position can be activated at this point. Wherein
    only in AHCI mode will the maximum data transfer rate from the disk be reached.
  • If the older Windows, or if the hard drive was connected, then only IDE, Native or Enchansed.
  • The disk controllers themselves must also be Enabled.

Here are a couple of screenshots from different BIOS with these settings:

If your computer has 2 hard disks (or a DVD drive) and both of them are connected via IDE cables, then the problem may lie in their incorrect configuration. If you have just such a connection and in the BIOS you see the following picture:

then this is your case. In this configuration (when both are connected via IDE), one disk should be Master, that is, the main one, the one on which Windows, and the other Slave, that is, the secondary.

disc

This priority is configured using a special jumper (jumper) installed on the contacts on the back of the case.

All possible positions of this jumper and their modes are described, as a rule, on a sticker on the disk case. They may differ from manufacturer to manufacturer.

From our table, we see that if Windows is installed on the disk and it will be the Master one, or if it is used alone, then we put a jumper on the first 2 vertical contacts. If the secondary (Slave), then remove the jumper altogether.

We do this with our hard drives and go into the BIOS again. They will now be automatically detected by the computer’s motherboard. Such a picture should be drawn

Then Windows will see that a second hard drive is connected to the computer, and you can work with it.

How to put a password on a hard drive / flash drive using BitLocker

Bitlocker is a utility included with Windows 7 and later. With its help, you can protect partitions of a hard disk or a USB flash drive. If you set a password using the described method, you will not be able to access the data on the media, even if it is removed from the computer and transferred to another. That is, even outside your system, your information will be protected if you have, of course, a strong password.

To put a password on a hard disk / flash drive, do the following:

  • Right-click on the hard disk / flash drive section, and go to the line “Enable Bitlocker”.

Check the box next to “Use password to unlock”. Write your password below and repeat it. Come up with a strong password and don’t forget it. After that, click the “Next” button.

Create a password for your hard drive

  • The next step is to save your password recovery data in case you suddenly forget it. I recommend not to skip this stage, as you risk in this case. Before you put a password on your hard drive, think about how you will store the data for its recovery. They can be printed, saved to a file on a computer or on a USB flash drive. Select what you need and click “Next”.
READ  How Much Oil To Fill In The Lawn Mower Engine

Save the file to recover your password in case of loss

  • Click the “Start encryption” button and wait for the process to finish. If the disk is large in volume, then it may take a long time. At the end, the disk icon will look like with a lock.

Wait for the end of the encryption process

Now you know how to put a password on your hard drive. Try to open the encrypted partition to make sure everything works as it should.

How to put a password on a hard disk or USB flash drive: instructions without additional programs

In this article I will tell you how to put a password on a hard drive or USB flash drive. In this manual, we will not use any third-party programs, everything will be done using the built-in Windows tools. And this circumstance gives hope for the reliability of the method.

disc

To set a password for launching a program in Windows, you can use one small and simple program.

To set a password for launching a program in Windows, you can use one small and simple program.

To set a password for launching a program in Windows, you can use one small and simple program.

How to create a D drive in Windows

One of the frequent wishes of computer and laptop owners is to create a D drive in Windows 10, 8 or Windows 7 in order to subsequently store data (photos, movies, music, etc.) on it, and this makes sense, especially in the case, if you reinstall the system from time to time, formatting the disk (in this situation, it will be possible to format only the system partition).

In this instruction. step by step on how to divide a computer or laptop disk into C and D using the system tools and third-party free programs for this purpose. This is relatively easy to do, and even a novice user will be able to create a D drive. It can also be useful: How to increase the C drive with the D drive.

Note: to perform the actions described below, there must be enough space on the C drive (on the system partition of the hard disk) to allocate it “for the D drive”, i.e. to allocate it more than free, it will not work.

How to split disk into C and D on command line

All that was described above can be done not only using the Windows Disk Management graphical interface, but also in the command line using the following steps:

  • Run Command Prompt as Administrator and use the following commands in order.
  • diskpart
  • list volume (as a result of this command, pay attention to the volume number corresponding to your C drive, which will be compressed. Next. N).
  • select volume N
  • shrink desired = SIZE (where size is the size of the D drive being created in megabytes. 10240 MB = 10 GB)
  • create partition primary
  • format fs = ntfs quick
  • assign letter = D (here D is the desired drive letter, it must be free)
  • exit

This will close the command line, and the new drive D (or under a different letter) will appear in Windows Explorer.

Create Drive D with Windows Disk Management

All the latest versions of Windows have a built-in Disk Management utility, with which, among other things, you can partition your hard drive and create a D drive.

To launch the utility, press the WinR keys (where Win is the key with the OS logo), enter diskmgmt.msc and press Enter, after a short time “Disk Management” will load. After that follow these steps.

  • At the bottom of the window, find the disk partition corresponding to drive C.
  • Right-click on it and select “Shrink Volume” from the context menu.
  • After searching for available space on the disk, in the “Size of space to compress” field, specify the size of the created disk D in megabytes (by default, the full size of free disk space will be indicated there and it is better not to leave this value. there must be enough free space on the system partition for work, otherwise there may be problems, as described in the article Why the computer slows down). Click the “Compress” button.
  • After the compression is complete, you will see new space “to the right” of the C drive labeled “Not Allocated”. Right-click on it and select “Create Simple Volume”.
  • In the opened wizard for creating simple volumes, just click “Next”. If the letter D is not occupied by other devices, then at the third step it will be offered to assign it to the new disk (otherwise. the next ones in alphabetical order).
  • During the formatting stage, you can specify the desired volume label (signature for drive D). The rest of the parameters usually do not need to be changed. Click Next and then Finish.
  • Drive D will be created, formatted, will appear in Disk Management and Windows 10, 8 or Windows Explorer You can close the Disk Management Utility.

Note: if in the 3rd step the size of the available space is displayed incorrectly, i.e. the available size is much less than what is actually on the disk, which means that non-relocatable Windows files are preventing the disk from compressing. The solution in this case is to temporarily disable the paging file, hibernate and restart the computer. If these steps did not help, then additionally perform disk defragmentation.

Using the free software Aomei Partition Assistant Standard

There are many free programs that allow you to split your hard drive into two (or more). As an example, I’ll show you how to create a D drive in the free program in Russian Aomei Partition Assistant Standard.

  • After starting the program, right-click on the partition corresponding to your C drive and select the “Partition partition” menu item.
  • Specify the dimensions for drive C and drive D and click OK.
  • Click “Apply” at the top left of the main program window and “Go” in the next window and confirm restarting your computer or laptop to perform the operation.
  • After a reboot, which may take longer than usual (do not turn off the computer, provide power to the laptop).
  • After the process of partitioning the disk, Windows will boot again, but there will already be disk D in Explorer, in addition to the system partition of the disk.

This concludes. The instructions are intended for those cases when the system is already installed. But you can create a separate disk partition during Windows installation on your computer, see How to Partition a Disk in Windows 10, 8 and Windows 7 (last method).

What if it will be interesting too:

  • Windows 10
  • Configuring the router
  • Everything about Windows
  • Bootable USB stick
  • Virus treatment
  • Data recovery
  • Installing from a USB stick
  • In contact with
  • Classmates
  • Android

Why not subscribe?

Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram. Youtube, Yandex.Dzen)

04/17/2017 at 12:10

Good day.
please tell me.
New laptop, SSD 512. Win10 with latest update. I’m trying to split the C drive according to your recommendations, I deleted everything unnecessary, turned off what I can. Shows 421 free out of 466. Through disk management, shows the size of the space available for compression 232 gb.
Through the command line, when trying to make 300 gb, the disk gave: error of the virtual disk service, the compression ratio is too high, this will lead to the volume size being less than the minimum.
At the same time, in the process of all deletions and disconnections, the 232 gb figure did not change.
What’s the catch, you can tell?
respectfully,
Alexander.

04/18/2017 at 11:15

Alexander, I can’t say for sure. The point is most likely in non-relocatable system files. but I can’t recommend defragmenting the SSD.

disc

04/17/2017 at 12:36

Catch up.
Aomei does not partition the disc. Everything is exposed, reboot and zero result
No new discs appear.

04/17/2017 at 13:55

And one more thing, I tried to break it with regular means into the offered 232 gb. I wrote that there is not enough free space to perform the operation.
While at an impasse.
I would really appreciate your help.
respectfully,
Alexander.

04/18/2017 at 11:12

Alexander, reduce the value that he offers, at least by the same 32 GB. He just takes and writes all the free space there, but you can’t break it up like that (because you need space on the system partition, including for the action itself).

08/16/2017 at 17:28

Thanks for the information, accessible and simple!

02/04/2018 at 18:57

Hello. I continue to configure w10. Historically, since the W8, such a breakdown of the main HDD: C-system 500G and E-archive 500G. The letter D was called a bootable USB flash drive when creating and installing or an external HDD when backing up. With a clean install of the latest W10, the system takes about 50G. When installing the OS, the partitioning into sections did not change. I want to add / select disk D = 300G from C disk management. Will this renaming later affect when restoring the system using flash drives (boot or restore) or a backup disk that were D.
Sincerely, Vladimir.

02/05/2018 at 10:47

It depends on what means the backups were created. Usually does not affect, but it returns the disk to its “original” state when used. ie. without your newly allocated disk.

02/05/2018 at 14:37

Thanks again. And for the laptop.
When partition D was created, the small unallocated partition between C and E was compressed into C and disappeared. D turned out. Everything works. Do I need to restore it with a rollback or if necessary?

06.02.2018 at 08:33

No, not required.

04/15/2018 at 23:12

Hello, when installing Windows 10, I formatted all the disks from the previous Windows 10 and clicked on all the free space and chose to create, I created it for 100GB and then, despite what to install Windows 10, I chose Primary, after the entire installation, I have only Local Disk (C 🙂 and 368GB and more of which I cannot create a Local Disk (D 🙂 because there, when I right-click, I only have “New Simple Volume.”, “Properties”, “Help “. What needs to be done to create a Local Disk (D 🙂 from 368GB?

04/16/2018 at 09:26

Press New Simple Volume. this is it.

06/07/2018 at 19:48

Tell me please, when I press disk compression, it pops up to me that “the volume selected for compression has an unknown file system. Compressing this volume will delete the data stored on it. ” I can take a risk and still compress this disk, there will be no harm to my computer?

READ  How To Properly Line The Lawn Mower

08.06.2018 at 10:09

What kind of disc? What filesystem? If not the system one, then nothing will happen, but the data will be lost, and the disk will be formatted in NTFS

What is needed for work?

Installing an SSD in a laptop is a simple task and does not take much time. But when upgrading, it should be borne in mind that self-replacement of components may violate the terms of the warranty. However, if the warranty period for the laptop has already expired, you can take a chance.

What you need to install an SSD disk:

  • SATA SSD and laptop.
  • Screwdriver. Depending on the fastening of the laptop cover, you may need a cross or straight.
  • Something subtle to pry off the lid. A special laptop repair spatula or a regular plastic card will do.
  • Second data store. If you do not deliver the SSD, but replace the hard drive with it, then you will need an additional drive for transferring files.

Interesting: some manufacturers equip notebooks with two types of media. So in the top-end gaming Predator Helios 500 PH517-61 there is a two-terabyte hard drive and a 512 gigabyte SSD to boot.

How to install an SSD in a laptop. a detailed guide in 3 sections

To speed up the laptop, sometimes it is enough to insert the SSD drive. This task is simple, you can do everything yourself. The instruction will tell you how to proceed. The manual contains both a preparatory stage and, in fact, a description of the installation process.

SSD storage options

There are four methods for installing a solid-state device in a laptop:

The easiest method is to remove the hard drive and plug in the solid drive instead. It is important to take care in advance to transfer all the files that are stored on the HDD to another medium.

Tip: If you need a solid body for gaming, a volumetric model that can withstand a lot of load is suitable. Two terabyte 860 QVO. just like that.

2.Place an SSD in place of a classic hard drive, but turn the hard drive into external storage using a USB box.

Replace the SSD optical drive. An adapter box is needed here. The user needs to insert the SSD there, remove the OP, and then place the box with the SSD in its place. The method will not work for those who use an optical drive and those who do not have one.

Note: When buying such a box, consider its thickness. It must match the parameters of the OP. You can see how thick the drive is installed by removing it and measuring it with a centimeter. Another option is to enter the exact name of the drive in the search engine to see its parameters.

Put the solid-state device in place of the hard drive, and the screw is already installed instead of the OP using the box that was described in the previous method.

Recommendation: if you need an SSD as a system drive, a large amount is not a prerequisite. Models up to 256 gigabytes are enough, for example, A400 240GB.

How to install an SSD instead of a HDD

This is the easiest method. How to proceed is described in the table.

Interesting: the M.2 format models look like a stick of RAM. These SSDs are often installed in light and thin laptop computers.

Recommendation: if you need an inexpensive but reliable SSD option, you can choose a model with MLC memory, for example, SSD370S.

Now you can start checking the freshly installed component in the BIOS.

You need to see if the laptop sees an SSD. If the carrier was not identified, it may be due to:

  • poor contact of the interfaces: maybe the solid-state device did not fully enter the connector;
  • the drive itself is faulty: you can check it using another computer;
  • BIOS is outdated: in this case it will need to be updated.

Curious: the powerful ThinkPad E570 laptop already has an SSD, but if you want to put a second one, you can replace it with the drive.

If everything is in order, the laptop recognizes the drive, then you can start checking the operating mode of the solid-state drive. Need AHCI: This is a special mode for working with solid state drives. It allows you to activate all the advantages of SATA connection, in particular high speed. You can view the mode in the BIOS Advanced section. If it appears that the SSD is operating in a different mode, it needs to be switched and all parameters saved.

Tip: If you need a high-speed, super-capacious model, the 970 PRO will do the trick It works on a modern type of memory and has an impressive volume.

The operating system can now be installed. Experts recommend reinstalling the OS so that it automatically configures its services to work with solid-state storage.

As you can see from this guide, there are several ways to put an SSD in a laptop. If you put it in place of the hard drive, no adapters are needed. However, if you want to leave the HDD, there is still a solution. The connection process itself is simple, but you need to remember: if you disassemble the device, then you will not have to rely on warranty repairs.

Should you install Windows XP on an SSD drive?

Quite often, PC users have a question: will Windows XP work on an SSD. Before answering this question, I would like to warn our reader.

First, Windows XP is a very old operating system that is no longer supported by Microsoft itself. Also, no new drivers and programs are released for Windows XP. For example, the Chrome browser has not been released for XP for a long time. All this is fraught with consequences in which the system is susceptible to all kinds of virus attacks.

Second, Windows XP was released at a time before SSDs existed. It follows from this that it is not designed to work with them. Of course, you can find many instructions on how to install Windows XP online, but we strongly advise against doing so. Then you have a natural question, how to use software that only works in XP. A virtual machine will help solve this situation. For example, using the VirtualBox program, you can create a virtual machine in Windows 10 and run Windows XP on it.

Install Windows 10 on a new SSD drive

After setting up the AHCI mode in the computer on the MSI A68HM-P33 motherboard, we will try to install Windows 10 on an SSD drive on it. To do this, we will boot from the flash drive we prepared earlier.

In the first window, select the language settings and move on to the next, in which we press the Install button.

At the next stage, we will accept the license agreement.

In the window that appears, we are offered to update or install Windows 10 from scratch. We will focus on the second point, which will allow us to install Windows 10 on a blank SSD.

In the window for selecting and editing a disk, create a new partition using the Create button. as shown below.

After creating the partition, let’s proceed to the direct installation of Windows 10.

From the example, you can see that installing Windows 10 on an SSD is no different from installing on an HDD. It is also worth noting that the dozen is a new operating system that has been adapted for SSD drives. It follows from this that you do not need to configure the system to extend the life of the SSD. For example, in the top ten, automatic defragmentation is disabled for an SSD drive. Installing Windows 7 on an SSD is almost the same as the process described above. But after installing Windows 7, it will have to be optimized to extend the life of the SSD, for example, disable automatic defragmentation.

So that our readers do not have to look for information on the Internet about optimizing Windows for SSD, our website has an article “How to configure an SSD for Windows 7, 8 and 10”. In this article, you will find all the intricacies of setting to extend the life of an SSD, including how to disable automatic defragmentation on your laptop or desktop PC.

How to install Windows 10 on an SSD drive

Many personal computer users often have a question about how to install Windows 10 on an SSD. To answer this question, we have prepared a material in which we will describe in detail the process of installing dozens from scratch on an SSD.

Choosing a system for an SSD drive

To get the best performance out of an SSD, your PC or laptop must be:

  • Support for AHCI mode;
  • SATA 3.0 support

It should be borne in mind that when installing Windows 10, AHCI mode must be activated.

Let’s consider activating this mode on a stationary computer with an MSI A68HM-P33 motherboard and an AMD Kaveri A10-7850K processor. MSI A68HM-P33 motherboard is based on A68H chipset, which has SATA 3.0 support. To activate the AHCI mode, we need to go to the BIOS of the MSI A68HM-P33 motherboard. To do this, when starting the computer, press the DEL button.

Now let’s go to the right tab “SETTINGS”.

On this tab, we are interested in the “Advanced” item, on which we will go.

In the tab that opens, we are interested in the last item “Built-in peripheral devices”, on which we will go.

On this tab, we are interested in the “SATA Configuration” block and the first SATA slot to which the SSD is connected. The figure shows that the AHCI mode is already selected. To set this mode, just click on this item with the mouse.

Similarly, you can enable AHCI mode on other motherboards of laptops and stationary PCs.

It’s also worth noting that AHCI is the default on most newer PCs. But if, for example, the old computer was running Windows XP, then in this case the SATA port will work in IDE mode.

READ  How to Unscrew the Angle Grinder Nut Bitten Disc

Preparing a bootable USB drive for installing Windows 10

First of all, we need to create a bootable USB drive from which we will install the operating system on the SSD.

It should be noted that this instruction is recommended only for those users who have an electronic Windows 10 license, not a boxed one.

Therefore, if you have a boxed version of Windows with a disk, then feel free to skip this instruction. To create a bootable drive with a ten, we need a proprietary utility from Microsoft called MediaCreationTool. You can download this portable version of the program on the Microsoft Internet resource. www.microsoft.com. After downloading, we need a USB drive with a capacity of 4 GB or more. In our case, this is a 16 GB USB drive. After launching the program, we will get to its start window.

In this window, the developers ask us to accept the licensing agreement with Microsoft. We agree and click the Accept button. This action will take us to the next stage.

In this window, we are interested in the second item, which will allow us to create our bootable USB flash drive. Let’s select this item and go to the next window.

Here we have to select the options for installing Windows 10. In our case, this is the 64-bit home version. Clicking the Next button. we will get into the window for selecting the boot device to be created.

There is a USB stick and a regular DVD to choose from. Let’s stop at the flash drive and move on to the next stage.

Now let’s select our USB flash drive from the list and continue.

At this stage, the download and installation of the necessary files on the USB flash drive will begin so that it becomes bootable. Once the installation and download is complete, our USB drive will be ready.

Agri Fab Disc Harrow Attachment For Your Garden Tractor. A Review And Demonstration

How not to harm your SSD drive

Initially, the purpose of the new device is to increase the speed of your PC, however, every user wants his equipment to last as long as possible. To understand how to extend the life of your SSD will help the article on our site with tips for setting. Next, we will also touch on some important points.

Since the days of Windows XP, many PC users have been accustomed to defragmenting local disks. If the user installs the top ten on the SSD, then there is no need to look for where to disable automatic defragmentation in the settings, since the OS will not use this function. But many PC users are accustomed to defragmenting with third-party utilities that are not part of Windows. Therefore, we advise you to abandon this habit of defragmentation when an SSD is installed in the system. Also, disable the schedule in such programs that defragments at the specified time.

An inquisitive user of course will ask the question: why does Windows 10 disable defragmentation, and how third-party utilities affect this. The answer to this question is simple. every SSD has a limited number of rewrite cycles, so by defragmenting, you reduce the number of these cycles much faster.

We figured out defragmentation, now let’s try to figure out what harm the SSD is caused by formatting and wiping information on the disk. Fully formatting the SSD, just like defragmenting it, reduces the number of rewrite cycles.

With regard to erasing information by methods such as DOD, NSA and Gutmann, this is useful only for HDD disks. The fact is that all SSD drives have a TRIM function, which allows the OS to completely erase deleted files without the possibility of recovery.

Summing up

In this article, we tried to describe in detail the process of installing Windows 10 on a PC. From the material it becomes clear that installing dozens on SSDs is practically no different from installing Windows 7 and 8. The only thing to consider when using a bundle of SSD Windows 10 is a computer that must match the parameters of solid-state drives.

For example, if you will be using an SSD with a SATA 2 port rather than a SATA 3 port, then you will limit the speed of your SSD to 300M / s. We hope that thanks to our material, you can easily install Windows 10 on an SSD drive.

Method One: Windows Permissions

In this way, you can restrict access to a folder, any file, and even an entire section of the disk. If you have multiple user accounts on your computer, and you are the administrator of the computer, you can block access to the information you need to everyone except yourself. This is done like this:

  • Right-click on a file, folder or drive and select Properties.
  • Go to the Security tab.
  • In the list of accounts that have access to the file, one by one select those that do not need to open this file or folder, and in the Deny column, check all the boxes.

After that, the file, folder or disk partition will become inaccessible to all users whom you deny access. They will not be able to open it. for this you will need to enter the password for the administrator account, that is, yours. Do not forget to just give the file or folder an inconspicuous name, as the file names will still be visible to everyone.

We put passwords on files, folders, disks: securely and without unnecessary programs

Google, when asked how to put a password on a folder, first advises the FolderLock program. And we know that there are easier ways!

We have already written how to put a password on a USB flash drive and on a browser. Now let’s cover the remaining types of data: how to put a password on a folder, file or disk in Windows? Here are the easiest ways that do not require installing unfamiliar programs.

Method two: use the archiver

This method allows you to put a password on a folder or file. Surely you have at least one archiver on your computer, for example, WinRAR. Then you can hide a secret file or folder in an archive and set a password on it. To do this, do the following:

  • Right click on a file or folder and select Add to archive.
  • In the window that appears, in the Compression method field, select Store. This way you don’t have to waste time unpacking the file when opening the archive.
  • Then click on the Set password button.
  • In the window that appears, enter the password and confirmation and click OK.
  • Click OK on the main window. An archive with a file or folder will be created.
  • Delete the original file or folder.

Now, to access a file or folder, you first need to open the archive. And when you open the archive, enter the password that you have set. Don’t forget about inconspicuous names. In the same way, you can put a password on any new archive in Windows.

BitLocker

This method is for discs. It is available if you have Windows 7 Ultimate or Enterprise, Windows 8 / 8.1 or Windows 10. You can read more about using BitLocker in our article on encrypting a hard drive in Windows 10. And in order to encrypt a disk partition or flash drive, do the following :

  • Right click on the drive and select Turn on BitLocker.
  • In the window, check the Use password to unlock the disk box. Enter your password and confirmation and click Next.
  • In the next window, select the Encrypt entire disk radio button.
  • Click Start encryption and wait for it to finish.

Now, when you try to access the disk, the system will ask you to enter the password.

These are ways to deny access to your data without using any specific programs.

instructions on how to hide information from prying eyes:

Google Chrome will end support on March 2 and will not work on older PCs

Divorces when buying and selling an iPhone on Avito: new deception schemes

How to install a second Windows on a different disk partition from a running first Windows? In order not to languish while waiting for the installation media to boot, while system files are copied from it to the hard disk, installing a second Windows can be simplified using the free WinNTSetup program.

Installing a second Windows on a different partition or disk from a running first Windows using WinNTSetup

Scheme of a new divorce on Avito via courier delivery

How to protect yourself from peeping through the camera on Windows without sticking the “peephole”

Scammers on Avito sell puppies: how not to get divorced?

Installing a second Windows on a different partition or disk from a running first Windows using WinNTSetup